Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Track”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Flight-test of the glide-slope track and flare-control laws for an automatic landing system for a powered-lift STOL airplane

An automatic landing system was developed for the Augmentor Wing Jet STOL Research Airplane to establish the feasibility and examine the operating characteristics of a powered-lift STOL transport flying a steep, microwave landing system (MLS) glide slope to automatically land on a STOL port. The flight test results address the longitudinal aspects of automatic powered lift STOL airplane operation including glide slope tracking on the backside of the power curve, flare, and touchdown. Three different autoland control laws were evaluated to demonstrate the tradeoff between control complexity and the resulting performance. The flight test and simulation methodology used in developing conventional jet transport systems was applied to the powered-lift STOL airplane. The results obtained suggest that an automatic landing system for a powered-lift STOL airplane operating into an MLS-equipped STOL port is feasible. However, the airplane must be provided with a means of rapidly regulation lift to satisfactorily provide the glide slope tracking and control of touchdown sink rate needed for automatic landings.

Watson, D. M.↗
NASA NTRS1984

The design and development of a solar tracking unit

The solar tracking unit was developed to support the Laser Heterodyne Spectrometer (LHS) airborne instrument, but has application to a general class of airborne solar occultation research instruments. The unit consists of a mirror mounted on two gimbals, one of which is hollow. The mirror reflects a 7.6 cm (3.0 in.) diameter beam of sunlight through the hollow gimbal into the research instrument optical axis. A portion of the reflected sunlight is directed into a tracking telescope which uses a four quadrant silicon detector to produce the servo error signals. The colinearity of the tracker output beam and the research instrument optical axis is maintained to better than + or - 1 arc-minute. The unit is microcomputer controlled and is capable of stand alone operation, including automatic Sun acquisition or operation under the control of the research instrument.

Jones, I. W.↗
NASA NTRS1984

Improved charge injection device and a focal plane interface electronics board for stellar tracking

An improved Charge Injection Device (CID) stellar tracking sensor and an operating sensor in a control/readout electronics board were developed. The sensor consists of a shift register scanned, 256x256 CID array organized for readout of 4x4 subarrays. The 4x4 subarrays can be positioned anywhere within the 256x256 array with a 2 pixel resolution. This allows continuous tracking of a number of stars simultaneously since nine pixels (3x3) centered on any star can always be read out. Organization and operation of this sensor and the improvements in design and semiconductor processing are described. A hermetic package incorporating an internal thermoelectric cooler assembled using low temperature solders was developed. The electronics board, which contains the sensor drivers, amplifiers, sample hold circuits, multiplexer, analog to digital converter, and the sensor temperature control circuits, is also described. Packaged sensors were evaluated for readout efficiency, spectral quantum efficiency, temporal noise, fixed pattern noise, and dark current. Eight sensors along with two tracker electronics boards were completed, evaluated, and delivered.

Michon, G. J.↗
NASA NTRS1984

Longwall shearer tracking system

A tracking system for measuring and recording the movements of a longwall shearer vehicle includes an optical tracking assembly carried at one end of a desired vehicle path and a retroreflector assembly carried by the vehicle. Continuous horizontal and vertical light beams are alternately transmitted by means of a rotating Dove prism to the reflector assembly. A vertically reciprocating reflector interrupts the continuous light beams and converts these to discrete horizontal and vertical light beam images transmitted at spaced intervals along the path. A second rotating Dove prism rotates the vertical images to convert them to a second series of horizontal images while the first mentioned horizontal images are left unrotated and horizontal. The images are recorded on a film.

Poulsen, P. D.↗
NASA NTRS1982

Communications, tracking, and docking on the Space Station

Many of the communications, tracking, and docking functions on a large manned orbiting Space Station - one that is modular and made of metal - will have to be performed by optical systems out of necessity. This paper discusses four practical approaches to accomplishing Space Station functions using optical communications technology. It also provides the results of preliminary experiments involved in the design of particular systems. Major operational factors considered in each system design include: (a) electromagnetic interference problems, (b) data bandwidth requirements, (c) zero-gravity operations, (d) free-space operations, (e) data security, and (f) modular expansion of the Space Station structure. The technologies discussed are the following: (a) local infrared communications, (b) optical tracking and docking techniques, (c) long distance free space optical communications, and (d) local area optical networks.

Erwin, H. O.↗
NASA NTRS1983

Electromagnetically-tracked free-mass gravitational wave antennas

The response to a gravitational wave of two free masses whose relative motion is monitored with an electromagnetic tracking signal is derived. The results indicate a two-feature signature in one-way data and a three-feature signature in two-way data. The effect is applied to gravitational wave experiments using laser interferometers, spacecraft Doppler tracking, planetary ranging, and pulsar timing analysis. Actual results are presented from spacecraft Doppler experiments and from pulsar timing data analysis, with new upper limits being set on a possible cosmic gravitational wave background via the pulsar data.

Hellings, R. W.↗
NASA NTRS1984

Formation of ion damage tracks

A new model is proposed to explain both localized damage regions and preferential etching of damage tracks caused by the passage of energetic ions in insulators. The formation of each region of extended defects is initiated by the Auger decay of a vacancy produced in an inner electronic shell of an atom of the insulator by an incident ion. This decay produces an intense source of ionization within a small volume around the decaying atom, which causes decomposition of the material in a manner similar to that observed in pulsed laser irradiation. The resulting chemical or crystalline modification of the material is the latent track, which can be preferentially etched due to its changed structure.

Tombrello, T. A.↗
NASA NTRS1984

GSFC network operations with Tracking and Data Relay Satellites

The Tracking and Data Relay Satellite System (TDRSS) Network (TN) has been developed to provide services to all NASA User spacecraft in near-earth orbits. Three inter-relating entities will provide these services. The TN has been transformed from a network continuously changing to meet User specific requirements to a network which is flexible to meet future needs without significant changes in operational concepts. Attention is given to the evolution of the TN network, the TN capabilities-space segment, forward link services, tracking services, return link services, the three basic capabilities, single access services, multiple access services, simulation services, the White Sands Ground Terminal, the NASA communications network, and the network control center.

Spearing, R.↗
NASA NTRS1984

Effects of CW interference on the carrier tracking loop of the deep space network

A radio-frequency interference (RFI) environment can cause serious problems for communications systems, such as the Deep Space Network (DSN). For this reason, it is necessary to determine first the RFI susceptibility characteristics for DSN receiving systgms. The present investigation is concerned with CW RFI's which are close in frequency to the carrier frequency. The carrier tracking loop is highly sensitive, and this type of RFI will degrade the carrier loop performance before saturation effects become noticeable. The investigation has the objective to develop an analytical model which will make it possible to predict the tracking performance of the Block IV receiver when operated in the presence of a CW RFI in the receiver passband. The Block IV receiver represents one of the DSN receivers. Attention is given to the effects of a CW RFI on a phase-locked loop, the effects of a bandpass limiter, numerical results, experimental verification, and aspects of computer simulation.

Sue, M. K.↗
NASA NTRS1984

Geosynchronous orbiter tracking by VLBI - Demonstration design

A demonstration has been designed to determine the three dimensional position of a satellite in geosynchronous earth orbit, with 5 meter accuracy, using tracking techniques based on very-long-base-line interferometry (VLBI). Two experiments are analyzed: the first uses tracking stations in California, Australia, and Guam, and the second uses stations in California, Australia, and Japan. Satellite VLBI observables are defined and measurement errors are predicted. Both experiments employ alternate observations between the satellite and extra-galactic radio sources to determine the satellite plane-of-sky position. Positional accuracy resulting from various combinations of data acquired over the satellite's orbital period is discussed. A strategy is devised for resolving integer cycle phase ambiguities, inherent in VLBI, without relying on an externally provided reference trajectory.

Border, J. S.↗
NASA NTRS1986

Tracking System for Infrared Spectrometer

Visible laser tracking system for infrared laser spectometer keeps probe infrared laser beam aimed at moving reflector, thereby keeping reflector image and return laser beam within spectrometer field of view. System includes tracking mirror tilted by stepping motors under microprocessor control to deflect beams toward continually changing reflector position.

Johnson, R. A.↗
NASA NTRS1984

Improved Carrier Tracking by Smoothing Estimators

Smoothing as a way to improve the carrier phase estimation is proposed and analyzed. The performance of first and second order Kalman optimum smoothers are investigated. This performance is evaluated in terms of steady state covariance error computation, dynamic tracking, and noise response. It is shown that with practical amounts of memory, a second order smoother can have a position error due to an acceleration or jerk step input less than any prescribed maximum. As an example of importance to the NASA Deep Space Network, a second order smoother can be used to track the Voyager spacecraft at Uranus and Neptune encounters with significantly better performance than a second order phase locked loop.

Raez, C. A. P.↗
NASA NTRS1984

Subjective Workload Assessment and Voluntary Control of Effort in a Tracking Task

A manual control tracking task was manipulated along two dimensions: (1) control order and (2) forcing function bandwidth. In the first phase of the experiment subjective workload assessments were collected. It was found that subjective assessments of workload were closely associated with performance in the case of increasing control order, but not in the case of increasing bandwidth. This was interpreted as indicating that subjective workload assessments are most appropriate for the study of increasing difficulty centered in response selection processes as opposed to response execution processes. In the second phase of the experiment the subjects were asked to voluntarily limit the effort they applied in the performance of the tracking task. The results indicate that the subjects were quite facile in doing this. However, comparison of these data to the findings of other studies that manipulated effort via dual-task biasing indicate that effort manipulation is much more potent in a single-task configuration. This finding is discussed in terms of multiple resource theories of attentional capacity. The utility of an analysis of covariance procedure in studying the relationships between subjective ratings and performance is highlighted.

Vidulich, M. A.↗
NASA NTRS1984

Types of Tracking Errors Induced by Concurrent Secondary Manual Task

Future one-man helicopters may require the pilot to control flight with one hand, and simultaneously manipulate other instruments using the other hand. The nature of errors induced in a right hand tracking task (simulating flight control) when responses are required by the left hand are examined. The present experiment focused on detection of hesitations in which the tracking joy stick remained motionless for 1/3 sec. or longer.

Klapp, S. T.↗
NASA NTRS1984

Stereo Electro-optical Tracking System (SETS)

The SETS is a remote, non-contacting, high-accuracy tracking system for the measurement of deflection of models in the National Transonic Facility at Langley Research Center. The system consists of four electronically scanned image dissector trackers which locate the position of Light Emitting Diodes embedded in the wing or body of aircraft models. Target location data is recorded on magnetic tape for later 3-D processing. Up to 63 targets per model may be tracked at typical rates of 1280 targets per second and to precision of 0.02mm at the target under the cold (-193 C) environment of the NTF tunnel.

Koenig, E. W.↗
NASA NTRS1984

Space Shuttle program communication and tracking systems interface analysis

The Space Shuttle Program Communications and Tracking Systems Interface Analysis began April 18, 1983. During this time, the shuttle communication and tracking systems began flight testing. Two areas of analysis documented were a result of observations made during flight tests. These analyses involved the Ku-band communication system. First, there was a detailed analysis of the interface between the solar max data format and the Ku-band communication system including the TDRSS ground station. The second analysis involving the Ku-band communication system was an analysis of the frequency lock loop of the Gunn oscillator used to generate the transmit frequency. The stability of the frequency lock loop was investigated and changes to the design were reviewed to alleviate the potential loss of data due the loop losing lock and entering the reacquisition mode. Other areas of investigation were the S-band antenna analysis and RF coverage analysis.

Dodds, J. G.↗
NASA NTRS1983

The ARGOS system used for tracking gray whales

The development of satellite whale tags used to track gray whales in the eastern north Pacific Ocean is summarized. Two gray whales were radio-tagged in San Ignacio Lagoon (Mexico) and tracked on their northbound migration. One of the transmitters was modified to record and relay depth-of-dive information at 15 sec intervals throughout the course of the dive. Technical elements of data acquisition and analysis are outlined. The major biological findings are discussed.

Mate, B. R.↗
NASA NTRS1984

Relative potentials of concentrating and two-axis tracking flat-plate photovoltaic arrays for central-station applications

The purpose of this study is to assess the relative economic potentials of concenrating and two-axis tracking flat-plate photovoltaic arrays for central-station applications in the mid-1990's. Specific objectives of this study are to provide information on concentrator photovoltaic collector probabilistic price and efficiency levels to illustrate critical areas of R&D for concentrator cells and collectors, and to compare concentrator and flat-plate PV price and efficiency alternatives for several locations, based on their implied costs of energy. To deal with the uncertainties surrounding research and development activities in general, a probabilistic assessment of commercially achievable concentrator photovoltaic collector efficiencies and prices (at the factory loading dock) is performed. The results of this projection of concentrator photovoltaic technology are then compared with a previous flat-plate module price analysis (performed early in 1983). To focus this analysis on specific collector alternatives and their implied energy costs for different locations, similar two-axis tracking designs are assumed for both concentrator and flat-plate options.

Borden, C. S.↗