Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Afterbody Heating Predictions for a Mars Science Laboratory Entry Vehicle

The Mars Science Laboratory mission intends to deliver a large rover to the Martian surface within 10 km of its target site. One candidate entry vehicle aeroshell consists of a 3.75-m diameter, 70-deg sphere-cone forebody and a biconic afterbody similar to that of Viking. This paper presents computational fluid dynamics predictions of laminar afterbody heating rates for this configuration and a 2010 arrival at Mars. Computational solutions at flight conditions used an 8-species Mars gas model in chemical and thermal non-equilibrium. A grid resolution study examined the effects of mesh spacing on afterbody heating rates and resulted in grids used for heating predictions on a reference entry trajectory. Afterbody heating rate reaches its maximum value near 0.6 W/sq cm on the first windward afterbody cone at the time of peak freestream dynamic pressure. Predicted afterbody heating rates generally are below 3% of the forebody laminar nose cap heating rate throughout the design trajectory. The heating rates integrated over time provide total heat load during entry, which drives thermal protection material thickness.

Edquist, Karl T.↗
NASA NTRS1996

Rotary Transformer

None given. From first Par: Many spacecraft (S/C) and surface rovers require the transfer of signals and power across rotating interfaces. Science instruments, antennas and solar arrays are elements needing rotary power transfer for certain (S/C) configurations. Delivery of signal and power has mainly been done by using the simplest means, the slip ring approach. This approach, although simple, leaves debris generating noise over a period of time...The rotary transformer is a good alternative to slip rings for signal and power transfer.

interfaces rotating interfaces↗
NASA NTRS2005

Mars Science Laboratory Overview and MSL EDL Challenges

An overview of Mars Science Laboratory (MSL) Entry, Descent and Landing (EDL) challenges is presented. The topics include: 1) MSL Project Overview; 2) Mars Science Laboratory Top Level Schedule (Single Launch); 3) EDL Challenges; 4) MSL Surface System; 5) Mars Rover Wheel Family Tree; 6) Gusev Comparisons; 7) Mars Surface Accessibility; 8) Atlas V 401 Launch Performance; 9) Parachute Deployment Altitude Variation with Time of Year and Latitude; 10) Dust Storms and Winds; 11) Nominal MSL EDL Timeline; and 12) Specific EDL Challenges.

Umland, Jeffrey W.↗
NASA NTRS2009

UAVSAR: Airborne L-band Radar for Repeat Pass Interferometry

The primary objectives of the UAVSAR Project were to: a) develop a miniaturized polarimetric L-band synthetic aperture radar (SAR) for use on an unmanned aerial vehicle (UAV) or piloted vehicle. b) develop the associated processing algorithms for repeat-pass differential interferometric measurements using a single antenna. c) conduct measurements of geophysical interest, particularly changes of rapidly deforming surfaces such as volcanoes or earthquakes. Two complete systems were developed. Operational Science Missions began on February 18, 2009 ... concurrent development and testing of the radar system continues.

Moes, Timothy R.↗
NASA NTRS2011

Potential Scientific Output from the Visible Channels of EPIC Spectroradiometer as Part of the DSCOVR L1 Mission

In addition to 4 UV channels, the EPIC spectroradiometer will provide measurements at 6 visible (and near IR) channels (443,551,680,687.75, 764 and 779.9 nm) at roughly 10 km spatial resolution. The scattering angles are near backscattering and vary between 165 and 176 degree. Two pairs {680 and 687.75 nm} and {764 and 779.9 nm} represent 02 B- and A-bands (and their references) channels; they will be used for cloud height measurements over land and ocean. The B-band channel will contribute to the more absorbing A-band measurements over bright vegetation. A pair {680 and 779.9 nm} will be used for retrieving vegetation properties. Due to the special EPIC geometry, the illuminated part of the leaves will be always observed. As a result, in additional to the traditional Leaf Area Index (LAI), these observations for the first time will provide the sunlit fraction of LAI. Since the sunlit and shaded leaves exhibit different photosynthetic response to incident radiation, these measurements will help to improve global ecological and biogeochemistry models. Finally, a pair {443 and 551 nm} will be used for atmospheric correction. As a by-product of the atmospheric correction algorithm, we also expect to get aerosol optical thickness (AOT) and surface bidirectional reflection function (BRF). The presentation will briefly overview the proposed science algorithms.

Marshak, Alexander↗
NASA NTRS2013

Sample Analysis at Mars Instrument Simulator

The Sample Analysis at Mars Instrument Simulator (SAMSIM) is a numerical model dedicated to plan and validate operations of the Sample Analysis at Mars (SAM) instrument on the surface of Mars. The SAM instrument suite, currently operating on the Mars Science Laboratory (MSL), is an analytical laboratory designed to investigate the chemical and isotopic composition of the atmosphere and volatiles extracted from solid samples. SAMSIM was developed using Matlab and Simulink libraries of MathWorks Inc. to provide MSL mission planners with accurate predictions of the instrument electrical, thermal, mechanical, and fluid responses to scripted commands. This tool is a first example of a multi-purpose, full-scale numerical modeling of a flight instrument with the purpose of supplementing or even eliminating entirely the need for a hardware engineer model during instrument development and operation. SAMSIM simulates the complex interactions that occur between the instrument Command and Data Handling unit (C&DH) and all subsystems during the execution of experiment sequences. A typical SAM experiment takes many hours to complete and involves hundreds of components. During the simulation, the electrical, mechanical, thermal, and gas dynamics states of each hardware component are accurately modeled and propagated within the simulation environment at faster than real time. This allows the simulation, in just a few minutes, of experiment sequences that takes many hours to execute on the real instrument. The SAMSIM model is divided into five distinct but interacting modules: software, mechanical, thermal, gas flow, and electrical modules. The software module simulates the instrument C&DH by executing a customized version of the instrument flight software in a Matlab environment. The inputs and outputs to this synthetic C&DH are mapped to virtual sensors and command lines that mimic in their structure and connectivity the layout of the instrument harnesses. This module executes, and thus validates, complex command scripts prior to their up-linking to the SAM instrument. As an output, this module generates synthetic data and message logs at a rate that is similar to the actual instrument.

Benna, Mehdi↗
NASA NTRS2012

Integrated Instrument Simulator Suites for Earth Science

The NASA Earth Observing System Simulators Suite (NEOS3) is a modular framework of forward simulations tools for remote sensing of Earth's Atmosphere from space. It was initiated as the Instrument Simulator Suite for Atmospheric Remote Sensing (ISSARS) under the NASA Advanced Information Systems Technology (AIST) program of the Earth Science Technology Office (ESTO) to enable science users to perform simulations based on advanced atmospheric and simple land surface models, and to rapidly integrate in a broad framework any experimental or innovative tools that they may have developed in this context. The name was changed to NEOS3 when the project was expanded to include more advanced modeling tools for the surface contributions, accounting for scattering and emission properties of layered surface (e.g., soil moisture, vegetation, snow and ice, subsurface layers). NEOS3 relies on a web-based graphic user interface, and a three-stage processing strategy to generate simulated measurements. The user has full control over a wide range of customizations both in terms of a priori assumptions and in terms of specific solvers or models used to calculate the measured signals.This presentation will demonstrate the general architecture, the configuration procedures and illustrate some sample products and the fundamental interface requirements for modules candidate for integration.

emission↗
NASA NTRS2012

Integrated Instrument Simulator Suites for Earth Science

The NASA Earth Observing System Simulators Suite (NEOS3) is a modular framework of forward simulations tools for remote sensing of Earth's Atmosphere from space. It was initiated as the Instrument Simulator Suite for Atmospheric Remote Sensing (ISSARS) under the NASA Advanced Information Systems Technology (AIST) program of the Earth Science Technology Office (ESTO) to enable science users to perform simulations based on advanced atmospheric and simple land surface models, and to rapidly integrate in a broad framework any experimental or innovative tools that they may have developed in this context. The name was changed to NEOS3 when the project was expanded to include more advanced modeling tools for the surface contributions, accounting for scattering and emission properties of layered surface (e.g., soil moisture, vegetation, snow and ice, subsurface layers). NEOS3 relies on a web-based graphic user interface, and a three-stage processing strategy to generate simulated measurements. The user has full control over a wide range of customizations both in terms of a priori assumptions and in terms of specific solvers or models used to calculate the measured signals.This presentation will demonstrate the general architecture, the configuration procedures and illustrate some sample products and the fundamental interface requirements for modules candidate for integration.

radiative transfer↗
NASA NTRS2014

Land, Cryosphere, and Nighttime Environmental Products from Suomi NPP VIIRS: Overview and Status

The Visible Infrared Imaging Radiometer Suite (VIIRS) instrument was launched in October 2011 as part of the Suomi National Polar-orbiting Partnership (S-NPP: http://npp.gsfc.nasa.gov/). VIIRS was designed to improve upon the capabilities of the operational Advanced Very High Resolution Radiometer (AVHRR) and provide observation continuity with NASA's Earth Observing System's (EOS) Moderate Resolution Imaging Spectroradiometer (MODIS). Since the VIIRS first-light images were received in November 2011, NASA and NOAA funded scientists have been working to evaluate the instrument performance and derived products to meet the needs of the NOAA operational users and the NASA science community. NOAA's focus has been on refining a suite of operational products known as Environmental Data Records (EDRs), which were developed according to project specifications under the former National Polar-orbiting Environmental Satellite System (NPOESS). The NASA S-NPP Science Team has focused on evaluating the EDRs for science use, developing and testing additional products to meet science data needs and providing MODIS data product continuity. This paper will present to-date findings of the NASA Science Team's evaluation of the VIIRS Land and Cryosphere EDRs, specifically Surface Reflectance, Land Surface Temperature, Surface Albedo, Vegetation Indices, Surface Type, Active Fires, Snow Cover, Ice Surface Temperature, and Sea Ice Characterization (http://viirsland.gsfc.nasa.gov/index.html). The paper will also discuss new capabilities being developed at NASA's Land Product Evaluation and Test Element (http://landweb.nascom.nasa.gov/NPP_QA/); including downstream data and products derived from the VIIRS Day/Night Band (DNB).

land cover land use↗
NASA NTRS2016

In Situ Air Temperature and Humidity Measurements Over Diverse Land Covers in Greenbelt, Maryland, November 2013-November 2015

As our climate changes through time there is an ever-increasing need to quantify how and where it is changing so that mitigation strategies can be implemented. Urban areas have a disproportionate amount of warming due, in part, to the conductive properties of concrete and asphalt surfaces, surface albedo, heat capacity, lack of water, etc. that make up an urban environment. The NASA Climate Adaptation Science Investigation working group at Goddard Space Flight Center in Greenbelt, MD, conducted a study to collect temperature and humidity data at 15 min intervals from 12 sites at the center. These sites represent the major surface types at the center: asphalt, building roof, grass field, forest, and rain garden. The data show a strong distinction in the thermal properties of these surfaces at the center and the difference between the average values for the center compared to a local meteorological station. The data have been submitted to Oak Ridge National Laboratory Distributed Active Archive Center (ORNL-DAAC) for archival in comma separated value (csv) file format (Carroll et al.,2016) and can be found by following this link: http:daac.ornl.govcgi-bindsviewer.pl?ds_id1319.

Carroll, Mark L.↗
NASA NTRS2018

SMAP Mission: Changes in the RFI Environment

The Soil Moisture Active/Passive satellite microwave radiometer has been providing measurements of L-band thermal emission from Earth for more than 2 years. SMAP retrieves surface soil moisture from its brightness temperature measurements, and continues to provide science products to the user community. Even though the SMAP radiometer operates in a protected band, its measurements are still corrupted by Radio Frequency Interference (RFI) caused by illegal in-band transmissions or out-of-band emissions. The SMAP radiometer was designed to include special hardware to enable RFI detection and filtering using multiple detection algorithms. Given the good overall performance of SMAP algorithms to detect RFI sources, an automatic tool to report source properties automatically was developed and is now operational. This paper provides a preliminary analysis of the outputs of this reporting tool with a particular focus on the evolution of the RFI environment observed by SMAP during its period of operations.

L-band↗
NASA NTRS2018

Bioreduction of Solid Rocket Motors for Planetary Protection

Solid rocket propulsion systems have been used for in-space applications including planetary exploration missions for many years. Current NASA science lander projects require solid rocket propulsion systems to touchdown on the surface of potentially life-supporting planets and moons. A critical requirement of these missions is the prevention of accidental transportation of Earth's microbes to these environments. This mission requirement places an increased importance on the ability to reduce the biological burden that may be on board the solid propulsion systems and potentially deposited in a habitable environment. Some traditional interplanetary spacecraft decontamination operations could reduce the reliability of the solid propulsion system, indicating a need for new decontamination procedures. New techniques for biological burden reduction are being studied and may become the method of choice to ensure adequate reduction has been achieved. These techniques include biocidal elimination through chemical agents already present within the motor and cellular disruption due to assembly and operational environments induced in the motor. Recent investigations into the effectiveness of these techniques have generated promising experimental results. These techniques and current experimental results will be presented.

Boyle, Sadie M.↗
NASA NTRS2018

Beamforming P-Band Synthetic Aperture Radar for Planetary Applications

The Space Exploration Synthetic Aperture Radar (SESAR) is an advanced P-band beamforming radar instrument concept to enable a new class of observations suitable to meet multiple Decadal Survey science goals for planetary exploration. The radar is capable of providing unprecedented surface and near subsurface measurements at full polarimetry and fine (meter scale) resolution, and achieves beam agility through programmable waveform generation and digital beamforming. The radar’s highly flexible modular architecture employs a novel low power, lightweight design approach to meet stringent planetary instrument requirements, all while minimizing cost and development time.

Rincon, Rafael F.↗
NASA NTRS2019

Bioreduction of Solid Rocket Motors for Planetary Protection

Solid rocket propulsion systems have been used for in-space applications including planetary exploration missions for many years. Current NASA science lander projects require solid rocket propulsion systems to touchdown on the surface of potentially life-supporting planets and moons. A critical requirement of these missions is the prevention of accidental transportation of Earth's microbes to these environments. This mission requirement places an increased importance on the ability to reduce the biological burden that may be on board the solid propulsion systems and potentially deposited in a habitable environment. Some traditional interplanetary spacecraft decontamination operations could reduce the reliability of the solid propulsion system, indicating a need for new decontamination procedures. New techniques for biological burden reduction are being studied and may become the method of choice to ensure adequate reduction has been achieved. These techniques include using innate antimicrobial capacity of chemical agents already present within the motor and cellular disruption due to assembly and operational environments induced in the mated case. Recent investigations into the effectiveness of some of these techniques have generated promising experimental results.

Boyle, Sadie↗
NASA NTRS2019

Developing a Community of Practice for Applied Uses of Future PACE Data to Address Marine Food Security Challenges

External interaction:The Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission will include a hyperspectral imaging radiometer to advance ecosystem monitoring beyond heritage retrievals of the concentration of surface chlorophyll and other traditional ocean color variables, offering potential for novel science and applications. PACE is the first NASA ocean color mission to occur under the agency's new and evolving effort to directly engage practical end users prior to satellite launch to increase adoption of this freely available data toward societal challenges. Here we describe early efforts to engage a community of practice around marine food-related resource management, business decisions, and policy analysis. Obviously one satellite cannot meet diverse end user needs at all scales and locations, but understanding downstream needs helps in the assessment of information gaps and planning how to optimize the unique strengths of PACE data in combination with the strengths of other satellite retrievals, in situ measurements, and models. Higher spectral resolution data from PACE can be fused with information from satellites with higher spatial or temporal resolution, plus other information, to enable identification and tracking of new marine biological indicators to guide sustainable management. Accounting for the needs of applied researchers as well as non-traditional users of satellite data early in the PACE mission process will ultimately serve to broaden the base of informed users and facilitate faster adoption of the most advanced science and technology toward the challenge of mitigating food insecurity.

Schollaert Uz, Stephanie↗
NASA NTRS2018

Environmental Requirements and Verification for NASA’s Planned Europa Clipper

NASA’s Jet Propulsion Laboratory (JPL) and its partner are planning a mission to explore an icy moon of Jupiter, Europa. The objective of the planned Europa Clipper mission is to gain insight into the key ingredients for this potentially habitable world. This mission will conduct investigations using a suite of instruments that includes a set of five remote sensing instruments, four in-situ fields and particles instruments, and a two-channel ice-penetrating radar. Among its science objectives are to produce high-resolution images of Europa's surface, determine its composition, look for signs of recent or ongoing activity, measure the thickness of the ice shell, search for subsurface lakes, and determine the depth and salinity of Europa's ocean. Europa Clipper is expected to encounter a very challenging environment, particularly in radiation. This paper provides a comprehensive description of the challenging environments and the environmental requirements that are levied onto the Europa Clipper system design. The mitigations activities being conducted or planned to ensure compliance with the severe environments will be described. Also discussed will be how the environmental requirements are verified and at which level of integration to ensure mission success.

Man, Kin F.↗
NASA NTRS2020

The InSight APSS Data Return Anomaly: Development of an Automated Detection and Response Method

The Auxiliary Payload Sensor Suite (APSS), a collection of environmental sensors carried by the Interior exploration using Seismic Investigations, Geodesy, and Heat Transport (InSight) lander, is capable of measuring Martian air temperature, wind speed, atmospheric pressure, and local magnetic fields. After beginning Mars surface operations, the instrument experienced an anomaly that prevented it from returning science data. The anomaly affected not only the instrument, but also had impacts at the system level. APSS returned to normal operations, however the anomaly occurred again just several weeks later. This proved the need for a streamlined recovery response that would be adaptable to the operations planning cycle and workforce, that would limit the system-level impacts of the anomaly, and that would minimize the instrument downtime. The recovery response evolved from a ground-in-the-loop response to an onboard method for detecting occurrences of the anomaly and automatically recovering the instrument. Ultimately, the automated detection and response method reduced instrument downtime from days to hours and significantly minimized science data loss.

Mittal, Nimisha↗