SEARCH · Engineering Papers
Results for “Solvent Free”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
On the Mechanism of Bilayer Separation by Extrusion, or Why Your LUVs Are Not Really Unilamellar
Extrusion through porous filters is a widely used method for preparing biomimetic model membranes. Of primary importance in this approach is the efficient production of single bilayer (unilamellar) vesicles that eliminate the influence of interlamellar interactions and strictly define the bilayer surface area available to external reagents such as proteins. Sub-microscopic vesicles produced using extrusion are widely assumed to be unilamellar, and large deviations from this assumption would dramatically impact interpretations from many model membrane experiments. In this work, using three probe-free methods—small-angle X-ray and neutron scattering (SAXS and SANS) and cryogenic electron microscopy (cryoEM)—we report unambiguous evidence of extensive multilamellarity in extruded vesicles composed of neutral phosphatidylcholine lipids, including for the common case of neutral lipids dispersed in physiological buffer and extruded through 100 nm diameter pores. In such preparations, only ~35% of lipids are externally accessible, and this fraction is highly dependent on preparation conditions. Charged lipids promote unilamellarity, as does decreasing solvent ionic strength, indicating the importance of electrostatic interactions in determining the lamellarity of extruded vesicles. Smaller extrusion pore sizes also robustly increase the fraction of unilamellar vesicles, suggesting a role for membrane bending. Taken together, these observations suggest a mechanistic model for extrusion, wherein formation of unilamellar vesicles involves competition between bilayer bending and adhesion energies. The findings presented here have wide-ranging implications for the design and interpretation of model membrane studies, especially ensemble-averaged observations relying on the assumption of unilamellarity.
Electrostatic Screening Modulates Analyte Binding and Emission of Carbon Nanotubes
Many nanomaterials are promising biosensor elements due to capabilities for transduction of biomolecular interactions into an electrical or optical signal. Certain nanomaterials have intrinsic charges and are thus susceptible to electrostatic forces that may enhance or attenuate their response. We are using a combination of experimental and computational approaches, we found and characterized a critical role of the solvent salt conditions in determining the extent of optical changes due to anionic analyte interaction with an intrinsically responsive nanomaterial, single-walled carbon nanotubes. Using a well-characterized model anionic analyte, we found that monovalent salts enabled greater optical changes of a polyanion-bound carbon nanotube in a highly dose-dependent manner but not with a neutrally charged analyte. Molecular dynamics simulations were used to derive a quantitative understanding of this mechanism from a free-energy perspective. We also show that salt can be used to enhance the sensitivity of detection for a polyanionic analyte. These results suggest that electrostatic screening is an important parameter for intrinsically charged nanoparticle sensors and it may be tuned to control the response to analytes.
Theory of hydrophobicity: transient cavities in molecular liquids
Observation of the size distribution of transient cavities in computer simulations of water, n-hexane, and n-dodecane under benchtop conditions shows that the sizes of cavities are more sharply defined in liquid water but the most-probable-size cavities are about the same size in each of these liquids. The calculated solvent atomic density in contact with these cavities shows that water applies more force per unit area of cavity surface than do the hydrocarbon liquids. This contact density, or "squeezing" force, reaches a maximum near cavity diameters of 2.4 angstroms. The results for liquid water are compared to the predictions of simple theories and, in addition, to results for a reference simple liquid. The numerical data for water at a range of temperatures are analyzed to extract a surface free energy contribution to the work of formation of atomic-size cavities. Comparison with the liquid-vapor interfacial tensions of the model liquids studied here indicates that the surface free energies extracted for atomic-size cavities cannot be accurately identified with the macroscopic surface tensions of the systems.
General Strategy for the Preparation of Stable Luminous Nanocomposite Inks Using Chemically Addressable CsPbX 3 Peroskite Nanocrystals
The potential optoelectronic applications of perovskite nanocrystals (NCs) are primarily limited by major material instability arising from the ionic nature of the NC lattice. Herein, we introduce a facile and effective strategy to prepare extremely stable CsPbX 3 NC-polymer composites. NC surfaces are passivated with reactive methacrylic acid (MA) ligands, resulting in the formation of homogeneous nanocubes (abbreviated as MA-NCs) with a size of 14-17 nm and a photoluminescence quantum yield above 80%. The free double bonds on the surface then serve as chemically addressable synthetic handles, enabling UV-induced radical polymerization. Critically, a bromide-rich environment is developed to prevent NC sintering. The composites obtained from copolymerizing MA-NCs with hydrophobic methyl methacrylate and methacrylisobutyl polyhedral oligomeric silsesquioxane monomers exhibit enhanced properties compared to previously reported encapsulated NCs, including higher quantum yields, remarkable chemical stability toward water, and much enhanced thermal stability. The good solubility of the composite in organic solvent further enables its use as a solution-processable luminescent ink, used here for fabrication of white-light-emitting diodes with high luminous efficiency and excellent color-rendering index. The resulting fluorescent and stable NC ink opens the door to potential scalable and robust optoelectronic applications.
Coordination Chemistry and Photoluminescence of Sm(II) Dibenzo-24-crown-8 Complexes
Three Sm(II) dibenzo-24-crown-8 (db24c8) complexes were synthesized in anhydrous, air-free conditions via the reaction of SmI 2 with db24c8 and tetrabutylammonium tetraphenylborate ([TBA][BPh 4 ]; where needed) in acetonitrile (CH 3 CN), dimethoxyethane (DME), and tetrahydrofuran (THF) to yield [Sm(db24c8)(CH 3 CN) 2 ][BPh 4 ][I]·CH 3 CN, [Sm(db24c8)(DME)]I 2 , and [Sm(db24c8)(THF) 2 ]I 2 , respectively. In each case, a 10-coordinate, staggered dodecahedral (2:6:2) environment is formed around the Sm 2+ center that is completed by either two solvent molecules (CH 3 CN or THF) or one bidentate solvent molecule (DME). Inner-sphere solvent molecules can be excluded by reacting SmI 2 with db24c8 in 1:3 THF:toluene to yield Sm(db24c8)I 2 . Here, this molecule features a distorted, eight-coordinate, hexagonal pyramidal Sm 2+ metal center, where the coordinated db24c8 molecule shows a torsion angle unexpectedly close to the 180° antiperiplanar arrangement and two uncoordinated db24c8 oxygen atoms. Solution UV–vis–NIR measurements demonstrate that Sm 2+ is a good size match for the cavity of various db24c8 conformations and that Eu 2+ and Yb 2+ exhibit competition between acetonitrile solvation and the Eu 2+ and Yb 2+ /db24c8 complexes in solution. During excitation by 546 nm light, both [Sm(db24c8)(DME)]I 2 and [Sm(db24c8)(THF) 2 ]I 2 exhibit mixed 5d → 4f and 4f → 4f emission at 20 °C and exclusively 4f → 4f at −180 °C, whereas Sm(db24c8)I 2 only shows 5d → 4f emission regardless of temperature. Photoluminescence from [Sm(db24c8)(CH 3 CN) 2 ][BPh 4 ][I]·CH 3 CN is quenched.
Cavitation energies can outperform dispersion interactions
Amongst all intermolecular interactions that bring molecules, biomolecules, and even molecular fragments together, dispersion interactions are the omnipresent ones. Nevertheless, their contribution to solution-phase phenomena has recently become a matter of debate. In aqueous solution, in particular, they compete with the hydrophobic effect, which also drives associative processes, and when macrocyclic cavities are involved, the release of high-energy water has been identified as an extra driving force. We have now studied the binding of noble gases (He, Ne, Ar, Kr, Xe) with the macrocyclic receptor cucurbit[5]uril (CB5) in aqueous solution through a displacement strategy by using methane and ethane as 1H NMR probes. We dissected the hydration free energies of the noble gases into an attractive dispersive contribution and a repulsive one for cavity formation. This allowed us to fine-grain the components that contribute to host-guest binding and we reach the conclusion that the binding process in solution is driven by differential cavitation energies rather than dispersion interactions. This means that the free energy required to create a cavity to accept the noble gas inside CB5 is much lower (actually zero, since the cavity of the host is non-solvated) than that to create a similarly sized cavity in bulk water, and it is the recovery of the latter cavitation energy, which drives the overall process. The concept of differential cavitation energies merges seamlessly two previous approaches for predicting supramolecular thermodynamics, namely that of cohesive energy density (which applies to bulk solvent) and that of high-energy water (which becomes important for discrete concave binding sites). The dominance of differential cavitation energies in driving guest binding to poorly hydrated, concave binding sites (V < 100 Å3) has implications for the refinement of gas-storage materials and the understanding of biological receptors.
Assessment of Nuclear Energy to Support Negative Emission Technologies
The feasibility and performance of nuclear energy coupled with Negative Emission Technology (NET) processes were investigated in this report. Three overarching questions from nuclear NET systems guided this research: which NET would be able to use heat and/or electricity from nuclear power plants (NPPs); what is the performance and cost of a nuclear NET system; and what would be the market outlook for this system? Among the various NETs that are actively being developed, several were found to potentially benefit from coupling with an NPP via (1) large amounts of decarbonized and constant-output electricity; (2) free waste heat or cheap low-temperature heat; or (3) high-temperature heat. NPPs were found to be compatible with Direct Air Capture (DAC) systems, and a detailed techno-economic analysis of coupled NPP&DAC systems was performed. Preliminary analysis also indicated that biomass and water-based NETs are potentially compatible with NPPs, but further work is needed to quantify the performance of these nuclear NET systems. Design and performance analyses were completed for both liquid solvent DAC (L-DAC) and solid sorbent DAC (S-DAC) technologies. A 1.0-GWth NPP coupled with L-DAC and S-DAC was found to be able to capture 12–15 Mt CO 2 /yr and 1.0–1.5 Mt CO 2 /yr, respectively. While the L-DAC process enables much greater CO 2 capture than the S-DAC process when both are sized with a 1 GWth NPP, the NPP&L-DAC system considered also requires >2 GWth natural gas oxy-combustion to reach adequate temperature in the calciner. CO 2 generated from natural gas combustion is also captured as part of the calcination process, in addition to the CO 2 captured from air, resulting in overall CO 2 sequestration of close to 30% more than what is captured from air. The cost of carbon capture calculated with the levelized cost of DAC (LCOD) had a range of $\$170–260$/tCO 2 for NPP&L-DAC systems and a range of $\$650–680$/tCO 2 for NPP&S-DAC systems. For both DAC systems, the NPP provides economic benefit when compared to previous National Energy Technology Laboratory (NETL) studies of non-nuclear DAC systems, leading to reduction of LCOD by 5–7% for L-DAC, and 8–13% for S-DAC. For the NPP&DAC systems, a preliminary market analysis reviewed potential CO 2 market prices and eligibility for incentives. The estimated potential revenues for CO 2 capture (coming from federal incentive, CO 2 commodity markets, or offset market) is in the range of $\$170–979$ tCO 2 , and the results show that because of lower LCOD, the NPP&L-DAC process would be more attractive to a market than the NPP&S-DAC process. The large investment needed for NPP&DAC processes would require long-term certainty of sufficient market size, CO 2 prices, and incentives. Enabling NPPs to ramp DAC operation up or down based on electricity market price is not expected to significantly increase revenues of the NPP&DAC system. This is because the revenues from CO 2 sequestration are required to be very high to justify the deployment and continuous operation of the very expensive DAC technologies. In this analysis, several new research questions were uncovered, and follow-up analyses are recommended for further investigation, including a detailed feasibility study of NPP coupled with other NET systems such as biomass pyrolysis and gasification with carbon capture and storage, and seawater carbon capture.
Aqueously Dispersed Silver Nanoparticle-Decorated Boron Nitride Nanosheets for Reusable, Thermal Oxidation-Resistant Surface Enhanced Raman Spectroscopy (SERS) Devices
The impurity-free aqueous dispersions of boron nitride nanosheets (BNNS) allowed the facile preparation of silver (Ag) nanoparticle-decorated BNNS by chemical reduction of an Ag salt with hydrazine in the presence of BNNS. The resultant Ag-BNNS nanohybrids remained dispersed in water, allowing convenient subsequent solution processing. By using substrate transfer techniques, Ag-BNNS nanohybrid thin film coatings on quartz substrates were prepared and evaluated as reusable surface enhanced Raman spectroscopy (SERS) sensors that were robust against repeated solvent washing. In addition, because of the unique thermal oxidation-resistant properties of the BNNS, the sensor devices may be readily recycled by short-duration high temperature air oxidation to remove residual analyte molecules in repeated runs. The limiting factor associated with the thermal oxidation recycling process was the Ostwald ripening effect of Ag nanostructures.
Supported liquid inorganic membranes for nuclear waste separation
A system and method for the extraction of americium from radioactive waste solutions. The method includes the transfer of highly oxidized americium from an acidic aqueous feed solution through an immobilized liquid membrane to an organic receiving solvent, for example tributyl phosphate. The immobilized liquid membrane includes porous support and separating layers loaded with tributyl phosphate. The extracted solution is subsequently stripped of americium and recycled at the immobilized liquid membrane as neat tributyl phosphate for the continuous extraction of americium. The sequestered americium can be used as a nuclear fuel, a nuclear fuel component or a radiation source, and the remaining constituent elements in the aqueous feed solution can be stored in glassified waste forms substantially free of americium.
The Use of HFC (CFC Free) Processes at the NASA Stennis Space Center
The search for ozone depleting alternative chemicals was heightened when, in 1990, the more than 65 countries that had signed the Montreal Protocol agreed to phase out completely by the year 2000. In 1992, then-president Bush advanced this date for the United States to January l, 1996. In 1991, it was realized that the planned phase out and eventual elimination of ozone depleting chemicals imposed by the Montreal Protocol and the resulting Clean Air Act (CAA) amendments would impact the cleaning and testing of aerospace hardware at the NASA Stennis Space Center. Because of this regulation, the Test & Engineering Sciences Laboratory has been working on solvent conversion studies to replace CFC-113. Aerospace hardware and test equipment used in rocket propulsion systems require extreme cleanliness levels to function and maintain their integrity. Because the cleanliness of aerospace hardware will be affected by the elimination of CFC-113; alternate cleaning technologies, including the use of fluoridated solvents have been studied as potential replacements. Several aqueous processes have been identified for cleaning moderately sized components. However, no known aqueous alternative exists for cleaning and validating T&ME and complex geometry based hardware. This paper discusses the choices and the methodologies that were used to screen potential alternatives to CFC-113.
Structural basis of ligand recognition at the human MT1 melatonin receptor
Melatonin (N-acetyl-5-methoxytryptamine) is a neurohormone that maintains circadian rhythms by synchronization to environmental cues and is involved in diverse physiological processes such as the regulation of blood pressure and core body temperature, oncogenesis, and immune function. Melatonin is formed in the pineal gland in a light-regulated manner by enzymatic conversion from 5-hydroxytryptamine (5-HT or serotonin), and modulates sleep and wakefulness5 by activating two high-affinity G-protein-coupled receptors, type 1A (MT 1 ) and type 1B (MT 2 ). Shift work, travel, and ubiquitous artificial lighting can disrupt natural circadian rhythms; as a result, sleep disorders affect a substantial population in modern society and pose a considerable economic burden. Over-the-counter melatonin is widely used to alleviate jet lag and as a safer alternative to benzodiazepines and other sleeping aids and is one of the most popular supplements in the United States. Here in this paper, we present high-resolution room-temperature X-ray free electron laser (XFEL) structures of MT 1 in complex with four agonists: the insomnia drug ramelteon, two melatonin analogues, and the mixed melatonin–serotonin antidepressant agomelatine. The structure of MT 2 is described in an accompanying paper. Although the MT 1 and 5-HT receptors have similar endogenous ligands, and agomelatine acts on both receptors, the receptors differ markedly in the structure and composition of their ligand pockets; in MT 1 , access to the ligand pocket is tightly sealed from solvent by extracellular loop 2, leaving only a narrow channel between transmembrane helices IV and V that connects it to the lipid bilayer. The binding site is extremely compact, and ligands interact with MT 1 mainly by strong aromatic stacking with Phe179 and auxiliary hydrogen bonds with Asn162 and Gln181. Our structures provide an unexpected example of atypical ligand entry for a non-lipid receptor, lay the molecular foundation of ligand recognition by melatonin receptors, and will facilitate the design of future tool compounds and therapeutic agents, while their comparison to 5-HT receptors yields insights into the evolution and polypharmacology of G-protein-coupled receptors.
Concentrated Electrolyte for the Sodium-Oxygen Battery: Solvation Structure and Improved Cycle Life
Alkali metal-oxygen batteries are of great interests for energy storage because of their unparalleled theoretical energy densities. Particularly attractive is the emerging Na-O 2 battery because of the formation of superoxide as the discharge product. Dimethyl sulfoxide (DMSO) is a promising solvent for this battery but its instability towards Na makes it impractical in the Na-O 2 battery. Here in this paper, we report the enhanced stability of Na in DMSO solutions containing concentrated sodium trifluoromethanesulfonimide (NaTFSI) salts (>3molkg -1 ). Raman spectra of NaTFSI/DMSO electrolytes and abinitio molecular dynamics simulation reveal the Na + solvation number in DMSO and the formation of Na(DMSO) 3 (TFSI)-like solvation structure. The majority of DMSO molecules solvating Na + in concentrated solutions reduces the available free DMSO molecules that can react with Na and renders the TFSI anion decomposition, which protects Na from reacting with the electrolyte. Using these concentrated electrolytes, Na-O 2 batteries can be cycled forming sodium superoxide (NaO 2 ) as the sole discharge product with improved long cycle life, highlighting the beneficial role of concentrated electrolytes for Na-based batteries.
Development of 225Ac-doped biocompatible nanoparticles for targeted alpha therapy
Abstract Targeted alpha therapy (TAT) relies on chemical affinity or active targeting using radioimmunoconjugates as strategies to deliver α-emitting radionuclides to cancerous tissue. These strategies can be affected by transmetalation of the parent radionuclide by competing ions in vivo and the bond-breaking recoil energy of decay daughters. The retention of α-emitting radionuclides and the dose delivered to cancer cells are influenced by these processes. Encapsulating α-emitting radionuclides within nanoparticles can help overcome many of these challenges. Poly(lactic- co -glycolic acid) (PLGA) nanoparticles are a biodegradable and biocompatible delivery platform that has been used for drug delivery. In this study, PLGA nanoparticles are utilized for encapsulation and retention of actinium-225 ([ 225 Ac]Ac 3+ ). Encapsulation of [ 225 Ac]Ac 3+ within PLGA nanoparticles (Z ave = 155.3 nm) was achieved by adapting a double-emulsion solvent evaporation method. The encapsulation efficiency was affected by both the solvent conditions and the chelation of [ 225 Ac]Ac 3+ . Chelation of [ 225 Ac]Ac 3+ to a lipophilic 2,9-bis-lactam-1,10-phenanthroline ligand ([ 225 Ac]AcBLPhen) significantly decreased its release (< 2%) and that of its decay daughters (< 50%) from PLGA nanoparticles. PLGA nanoparticles encapsulating [ 225 Ac]AcBLPhen significantly increased the delivery of [ 225 Ac]Ac 3+ to murine (E0771) and human (MCF-7 and MDA-MB-231) breast cancer cells with a concomitant increase in cell death over free [ 225 Ac]Ac 3+ in solution. These results demonstrate that PLGA nanoparticles have potential as radionuclide delivery platforms for TAT to advance precision radiotherapy for cancer. In addition, this technology offers an alternative use for ligands with poor aqueous solubility, low stability, or low affinity, allowing them to be repurposed for TAT by encapsulation within PLGA nanoparticles. Graphical Abstract
Hydrated Metal and Metal-Nitrate Complexes in Water: Full Lanthanide(III) Series plus Miscellaneous Metal Ions
This is a dataset of hydrated metal complexes and metal–nitrate hydrated complexes intended for public use, reproducibility, and downstream structural analysis. A key feature is coverage across the full lanthanide(III) series (La–Lu), enabling systematic comparisons of coordination motifs and bonding trends across the entire lanthanide sequence. In addition to the lanthanides, the dataset also includes other metal ions such as UO2(VI), Fe(II), and Fe(III). The dataset provides optimized geometries for hydrated and nitrate-containing hydrated complexes, together with representative ab initio molecular dynamics (AIMD) trajectories saved in standard XYZ formats. The accompanying NWChem input decks enable reproduction of the reported calculations and provide a starting point for extending the simulations to related coordination environments. Computationally, DFT calculations employ the B3LYP functional with DFT-D3BJ dispersion corrections and a COSMO continuum solvent model (dielectric constant 78.4) to represent solvation beyond the explicitly treated first hydration shell. AIMD simulations are performed with the NWChem qmd module at 298 K, integrating nuclear motion with the velocity-Verlet algorithm and controlling temperature using a Nosé–Hoover thermostat. Trajectories are approximately 4.8 ps in length and are used primarily to assess short-time stability of candidate coordination motifs, including (for lanthanides) differences between 8- versus 9-water coordination and comparisons between nitrate-bound and nitrate-free hydrated complexes.
Electric Double-Layer Structure in Primitive Model Electrolytes. Comparing Molecular Dynamics with Local-Density Approximations
We evaluate the accuracy of local-density approximations (LDAs) using explicit molecular dynamics simulations of binary electrolytes comprised of equisized ions in an implicit solvent. The Bikerman LDA, which considers ions to occupy a lattice, poorly captures excluded volume interactions between primitive model ions. Instead, LDAs based on the Carnahan–Starling (CS) hard-sphere equation of state capture simulated values of ideal and excess chemical potential profiles extremely well, as is the relationship between surface charge density and electrostatic potential. Excellent agreement between the EDL capacitances predicted by CS-LDAs and computed in molecular simulations is found even in systems where ion correlations drive strong density and free charge oscillations within the EDL, despite the inability of LDAs to capture the oscillations in the detailed EDL profiles.
Condensed phase QM/MM simulations utilizing the exchange core functions to describe exchange repulsions at the QM boundary region
In a recent work, we developed a method [H. Takahashi et al., J. Chem. Phys. 143, 084104 (2015)] referred to as exchange-core function (ECF) approach, to compute exchange repulsion E{sub ex} between solute and solvent in the framework of the quantum mechanical (QM)/molecular mechanical (MM) method. The ECF, represented with a Slater function, plays an essential role in determining E{sub ex} on the basis of the overlap model. In the work of Takahashi et al. [J. Chem. Phys. 143, 084104 (2015)], it was demonstrated that our approach is successful in computing the hydrogen bond energies of minimal QM/MM systems including a cationic QM solute. We provide in this paper the extension of the ECF approach to the free energy calculation in condensed phase QM/MM systems by combining the ECF and the QM/MM-ER approach [H. Takahashi et al., J. Chem. Phys. 121, 3989 (2004)]. By virtue of the theory of solutions in energy representation, the free energy contribution δμ{sub ex} from the exchange repulsion was naturally formulated. We found that the ECF approach in combination with QM/MM-ER gives a substantial improvement on the calculation of the hydration free energy of a hydronium ion. This can be attributed to the fact that the ECF reasonably realizes the contraction of the electron density of the cation due to the deficit of an electron.