SEARCH · Engineering Papers

Results for “Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Solution of the Navier-Stokes equations for a driven cavity

The flow field in a lid driven cavity is determined by integration of the incompressible Navier-Stokes equations. The numerical integration is accomplished via an operator splitting method known as the theta-scheme. This splitting separates the problem into the solution of a quasi-stokes problem and a nonlinear convection problem. Some details of solution methods used for the two subproblems and results obtained for the driven cavity are described. The schemes developed for the quasi-Stokes problem are more advanced at this stage than those for the nonlinear problem. However, the approaches used for both parts are outlined. As a model problem, a two dimensional square cavity with sides of unit length and a lid moving with unit velocity from left to right is considered. The Navier-Stokes equations are discretized in space on a uniform staggered or MAC mesh. The time discretization is accomplished via the theta-scheme.

Semeraro, B. D.↗

NASA NTRS1991

Exact and explicit optimal solutions for trajectory planning and control of single-link flexible-joint manipulators

An optimal trajectory planning problem for a single-link, flexible joint manipulator is studied. A global feedback-linearization is first applied to formulate the nonlinear inequality-constrained optimization problem in a suitable way. Then, an exact and explicit structural formula for the optimal solution of the problem is derived and the solution is shown to be unique. It turns out that the optimal trajectory planning and control can be done off-line, so that the proposed method is applicable to both theoretical analysis and real time tele-robotics control engineering.

Chen, Guanrong↗

NASA NTRS1991

Implicit solution of three-dimensional internal turbulent flows

The scalar form of the approximate factorization method was used to develop a new code for the solution of three dimensional internal laminar and turbulent compressible flows. The Navier-Stokes equations in their Reynolds-averaged form were iterated in time until a steady solution was reached. Evidence was given to the implicit and explicit artificial damping schemes that proved to be particularly efficient in speeding up convergence and enhancing the algorithm robustness. A conservative treatment of these terms at the domain boundaries was proposed in order to avoid undesired mass and/or momentum artificial fluxes. Turbulence effects were accounted for by the zero-equation Baldwin-Lomax turbulence model and the q-omega two-equation model. The flow in a developing S-duct was then solved in the laminar regime in a Reynolds number (Re) of 790 and in the turbulent regime at Re equals 40,000 by using the Baldwin-Lomax model. The Stanitz elbow was then solved by using an invicid version of the same code at M sub inlet equals 0.4. Grid dependence and convergence rate were investigated, showing that for this solver the implicit damping scheme may play a critical role for convergence characteristics. The same flow at Re equals 2.5 times 10(exp 6) was solved with the Baldwin-Lomax and the q-omega models. Both approaches show satisfactory agreement with experiments, although the q-omega model was slightly more accurate.

Michelassi, V.↗

NASA NTRS1991

Critical speeds and forced response solutions for active magnetic bearing turbomachinery, part 1

The prediction of critical speeds and forced response of active magnetic bearing turbomachinery is of great interest due to the increased use of this new and promising technology. Calculating the system undamped critical speeds and forced response is important to all those who are involved in the design of the active magnetic bearing system. An extended Jeffcott model which was used as an approximate solution to a more accurate transfer matrix procedure is presented. Theory behind a two-degree-of freedom extended Jeffcoat model is presented. Results of the natural frequency calculation are shown followed by the results of the forced response calculation. The system response was predicted for two types of forcing. A constant magnitude excitation with a wide frequency variation was applied at the bearings as one forcing function. The normal unbalance force at the midspan was the second source of excitation. The results of this extended Jeffcott solution gives useful design guidance for the influence of the first and third modes of a symmetric rotor system.

Keesee, J.↗

NASA NTRS1991

On the anomaly of velocity-pressure decoupling in collocated mesh solutions

The use of various pressure correction algorithms originally developed for fully staggered meshes can yield a velocity-pressure decoupled solution for collocated meshes. The mechanism that causes velocity-pressure decoupling is identified. It is shown that the use of a partial differential equation for the incremental pressure eliminates such a mechanism and yields a velocity-pressure coupled solution. Example flows considered are a three dimensional lid-driven cavity flow and a laminar flow through a 90 deg bend square duct. Numerical results obtained using the collocated mesh are in good agreement with the measured data and other numerical results.

Kim, Sang-Wook↗

NASA NTRS1989

Solution growth of Triglycine Sulfate (TGS) crystals on the International Microgravity Laboratory (IML-1)

An experiment was planned for the International Microgravity Laboratory (IML-1) to be launched around Feb. 1991. Crystals of triglycine sulfate (TGS) will be grown by low temperature solution crystal growth technique using a multiuser facility called Fluid Experiment System (FES). A special cooled sting technique of solution crystal growth will be used where heat is extracted from the seed crystal through a semi-insulating sting, thereby creating the desired supersaturation near the growing crystal. Also, a holocamera will be used to provide tomography of the three dimensional flow field and particle image displacement velocimetry to monitor the convective flows.

Lal, Ravi B.↗

NASA NTRS1990

Conceptual design of a closed loop nutrient solution delivery system for CELSS implementation in a micro-gravity environment

Described here are the results of a study to develop a conceptual design for an experimental closed loop fluid handling system capable of monitoring, controlling, and supplying nutrient solution to higher plants. The Plant Feeder Experiment (PFE) is designed to be flight tested in a microgravity environment. When flown, the PFX will provide information on both the generic problems of microgravity fluid handling and the specific problems associated with the delivery of the nutrient solution in a microgravity environment. The experimental hardware is designed to fit into two middeck lockers on the Space Shuttle, and incorporates several components that have previously been flight tested.

Schwartzkopf, Steven H.↗

NASA NTRS1990

Removing spurious reflections from CFD solutions by using the Complex Cepstrum

The Complex Cepstrum is shown to remove spurious reflections from artificial boundaries in computational fluid dynamic (CFD) solutions. First, the Complex Cepstrum theory is presented. A model time sequence consisting of a direct signal and reflections is analyzed theoretically with the Complex Cepstrum, and it is shown that the direct signal uncontaminated by reflections may be recovered in the time domain. Next, the Complex Cepstrum is applied to one- and three-dimensional CFD solutions, and spurious reflections from the boundary conditions are removed. By eliminating spurious reflections introduced by artificial boundary conditions, the applicability of CFD methods to aeroacoustic problems is greatly enhanced.

Meadows, Kristine R.↗

NASA NTRS1990

Computational challenge - Euler solution for ellipses

The present treatment of the inviscid flow past an ellipse via the numerical solution of the Euler equations yields a lifting solution for any combination of grid and/or angle of attack which is nonsymmetric, in order to illustrate the CFD challenge posed by this unusual flow behavior. The results obtained call into question the general capability and validity of numerical Euler results in the realm of conventional difference methods; specifically, the mechanism generating lifting results is not understood, and the problem's resolution is not yet in sight.

Pulliam, Thomas H.↗

NASA NTRS1990

CFIE MM solution for TE and TM incidence on a 2-D conducting body with dielectric filled cavity

The problem of determining the scattering cross section of an arbitrarily shaped two-dimensional conducting body with an arbitrarily shaped dielectric-filled cavity is considered. The problem is solved using a method-of-moments (MM) solution for the combined field integral equations (CFIE). The particular form of the method of moments solution used has here uses a minimum number of expansion coefficients. Results are given for TE and TM incident waves.

Goggans, Paul M.↗

NASA NTRS1991

A solution-adaptive grid procedure for the three-dimensional parabolized Navier-Stokes equations

A solution-adaptive grid procedure for the three-dimensional parabolized Navier-Stokes equations is developed on the basis of the two-dimensional line-by-line solution-adaptive technique of Harvey et al. (1990). It is shown that the new adaptive grid algorithm provides improved shock resolving characteristics over the conventional flow algorithm. The adaptation process has the ability of aligning grid lines with the existing flow-field structure, yielding increasing resolution of high gradient regions.

Harvey, Albert D., III↗

NASA NTRS1990

Modelling the solution growth of TGS crystals in low gravity

The experimental growth of triglycine sulfate (TGS) crystals from aqueous solution is modeled here in two dimensions using the PHOENICS finite volume code. Simulations are carried out for steady, impulsive, and periodic accelerations in order to determine tolerable acceleration levels. Scaling arguments are used to estimate the times required for thermal and solutal variations from the initial equilibrium state to be diffusively transported throughout the system, and to obtain order of magnitude information on the relative magnitudes of diffusive and convective transport. The computed concentration fields reflect the features of the concentration distributions found experimentally during experiments conducted aboard Spacelab 3 in 1985.

Nadarajah, Arunan↗

NASA NTRS1991

Natural convection in binary gases due to horizontal thermal and solutal gradients

The influence of augmenting and opposing thermal and solutal buoyancy forces on natural convection of binary gases due to horizontal temperature and concentration gradients is examined through comparison of smoke flow visualization and measured temperature and concentration distributions with numerical predictions. The observed flow at the cold wall was unsteady for opposing body forces. The same basic flow structure was observed, but the unsteady flow intensifies as the opposing solutal buoyancy force increases as compared to the thermal buoyancy force. Comparison of predicted and measured temperatures and concentrations is fair overall, but the steady-state analytical model fails to predict the unsteady flow and heat and mass transport for opposing body forces.

Weaver, J. A.↗

NASA NTRS1991

Closed timelike curves produced by pairs of moving cosmic strings - Exact solutions

Exact solutions of Einstein's field equations are presented for the general case of two moving straight cosmic strings that do not intersect. The solutions for parallel cosmic strings moving in opposite directions show closed timelike curves (CTCs) that circle the two strings as they pass, allowing observers to visit their own past. Similar results occur for nonparallel strings, and for masses in (2+1)-dimensional spacetime. For finite string loops the possibility that black-hole formation may prevent the formation of CTCs is discussed.

Gott, J. Richard, III↗

NASA NTRS1991

An improved error analysis of finite element solutions for postbuckled plates

The accurate calculation of stresses at boundaries and interfaces where FEM analysis may be unreliable is presently undertaken by an error analysis that derives a continuous approximation to discrete finite-element data, which can be differentiated to compute continuous stresses for component-failure predictions. An evaluation is conducted of this approximation in the context of the nonlinear PDEs. A novel interpolation formula which is a simple modification of the double Fourier sine series is used to reduce truncation errors near the rectangular plate boundary by means of an 'extended grid'. Results are presented from a FEM solution, a conventional double-Fourier series' continuous approximation, and a solution applying interpolation on the extended grid, which yields superior convergence properties near the plate boundaries.

Sistla, Rajaram↗

NASA NTRS1991

On the numerical solution of the dynamically loaded hydrodynamic lubrication of the point contact

A numerical transient solution of the hydrodynamically lubricated point contact problem is obtained using the ball-on-plane model. Results, which include the variation of the minimum film thickness and phase-lag with time as functions of excitation frequency, are compared with the analytic solution of the transient step bearing problem with the same dynamic loading function.

Lim, Sang G.↗

NASA NTRS1991

Analysis and closed-form solutions of circular and rectangular apertures in the transverse plane of a circular waveguide

An analysis is carried out to determine the discontinuity susceptance of a circular or rectangular aperture in the transverse plane of a circular waveguide. Closed-form solutions based on the scattered amplitude calculation and aperture coupling theory are derived. Example solutions for a small circular aperture and a resonant rectangular aperture are given. The calculated results agree very well with the experiments. The results have many applications in the design of circular waveguide components and circular waveguide-backed aperture antennas.

Eastham, Gary B.↗

NASA NTRS1990

Solution adaptive local rectangular grid refinement for transonic aerodynamic flow problems

This paper describes the use of solution-adaptive local grid refinement in a numerical method for solving transonic flow problems about complex three-dimensional aircraft configurations. The method is implemented in the TRANAIR code, which has been applied to help solve many practical engineering problems. Attention is focused here on the principal components of the solution-adaptive grid algorithms currently being developed and on two applications that demonstrate the capabilities of the algorithms.

Bieterman, Michael B.↗