Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Segregation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

($\mathrm{INVITED}$)Counter-ion effect on the diffusion behavior of $\mathrm{Y}$b, $\mathrm{L}$u, and $\mathrm{N}$d ions in $\mathrm{YAG}$ transparent ceramics

The ability to fabricate additively manufactured laser waveguides with sharp dopant concentration interfaces is limited by diffusion of the dopants at the temperatures required to fully densify the material. Compositional analysis of bilayer samples, where each layer was either undoped YAG or YAG doped with Yb, Lu, or Nd, were fabricated such that all combinations were available for testing. Samples were fabricated at both 1750°C and 1850°C to determine the diffusion behavior of each dopant alone and also in the presence of a second dopant. It was found that the experimental concentration profiles exhibited both intragranular (bulk) and grain boundary contributions, and thus fitting to a complementary error function equation required the use of two diffusion coefficients. Nd always diffused further along grain boundaries than the other dopants, due in part to its small segregation coefficient in YAG. It is shown that the presence of Nd as a counter dopant inhibits intragranular diffusion of other dopants while enhancing their grain boundary diffusion. All the observed trends were attributed to a combination of intragranular lattice strain due to: dopant ions replacing yttrium substitutionally, the relative driving forces for the segregation of dopant ions to grain boundaries, and the ability of one dopant to affect the diffusion of a different dopant in the other direction to maintain charge neutrality.

36 MATERIALS SCIENCE↗

Characteristics of the sub-micron ash aerosol generated during oxy-coal combustion at atmospheric and elevated pressures

This paper is concerned with the effect of pressure on the particle size distribution and the size-segregated composition of the sub-micron ash aerosol created during oxy-coal combustion under near practical self-sustaining combustion conditions. The problem is important because pressurized oxy-coal combustion has been proposed as one promising technology to minimize CO 2 emissions. Sub-micron ash plays a major role in ash deposition mechanisms, which, in turn, can control boiler performance. In this work, the same bituminous coal was burned at pressures of 1, 8 and 15 bar in O 2 /CO 2 environments. Here, tests employed a 100 kW (rated) oxy-fuel combustor (OFC) operated at atmospheric pressure (1 bar) and a 300 kW (rated) entrained-flow pressurized reactor (EFPR) at elevated pressures (8 and 15 bar). Although these tests were conducted under near practical combustion conditions, confounding effects of peak flame temperature variations were minimized for the 1 bar and 15 bar tests, allowing the role of elevated pressure to be isolated. For the EFPR tests, a specially designed sampling system was used to sample sub-micron ash aerosols from the pressurized combustor and is described in detail. Results showed that at the same peak temperature but higher pressure, the fractions of ash aerosol partitioned into the PM 0.6 and PM 1 size fractions were greatly diminished. Moreover, elevated pressures caused significant changes in the composition of the (size-segregated) sub-micron aerosol, especially in its alkali content, which increased significantly. Examination of fractions of each element that ended up in the sub-micron fume suggested that, at constant temperature, the effect of pressure on vaporization of semi-volatile metals was very different from that on the release into the gas phase of non-volatile metals and could not be explained by equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aerosol detection efficiency in inductively coupled plasma mass spectrometry

We used an electrostatic size classification technique to segregate particles of known composition prior to being injected into an inductively coupled plasma mass spectrometer (ICP-MS). Moreover, we counted size-segregated particles with a condensation nuclei counter as well as sampled with an ICP-MS. By injecting particles of known size, composition, and aerosol concentration into the ICP-MS, efficiencies of the order of magnitude aerosol detection were calculated, and the particle size dependencies for volatile and refractory species were quantified. Similar to laser ablation ICP-MS, aerosol detection efficiency was defined as the rate at which atoms were detected in the ICP-MS normalized by the rate at which atoms were injected in the form of particles. This method adds valuable insight into the development of technologies like laser ablation ICP-MS where aerosol particles (of relatively unknown size and gas concentration) are generated during ablation and then transported into the plasma of an ICP-MS. In this study, we characterized aerosol detection efficiencies of volatile species gold and silver along with refractory species aluminum oxide, cerium oxide, and yttrium oxide. Aerosols were generated with electrical mobility diameters ranging from 100 to 1000 nm. In general, it was observed that refractory species had lower aerosol detection efficiencies than volatile species, and there were strong dependencies on particle size and plasma torch residence time. Volatile species showed a distinct transition point at which aerosol detection efficiency began decreasing with increasing particle size. This critical diameter indicated the largest particle size for which complete particle detection should be expected and agreed with theories published in other works. Aerosol detection efficiencies also displayed power law dependencies on particle size. Aerosol detection efficiencies ranged from 10 -5 to 10 -11 . Free molecular heat and mass transfer theory was applied, but evaporative phenomena were not sufficient to explain the dependence of aerosol detection on particle diameter. Additional work is needed to correlate experimental data with theory for metal-oxides where thermodynamic property data are sparse relative to pure elements. Finally, when matrix effects and the diffusion of ions inside the plasma were considered, mass loading was concluded to have had an effect on the dependence of detection efficiency on particle diameter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Grain boundary blocking of ionic conductivity in nanocrystalline yttria-doped ceria thin films

Nanocrystalline YDC thin films with grain-sizes ranging from 38 to 93-nm were prepared using pulsed laser deposition followed by thermal annealing. Ionic conductivity decreased up to four orders of magnitude as the grain size increased. Using energy-dispersive X-ray spectroscopy, we showed that the counter-intuitive reduction in conductivity with grain-size is likely due to dopant and impurity segregation near grain-boundaries. Spectroscopic evidence suggests that the blocking effect due to defect segregation is more dominant on ionic conductivity than the grain-sizes.

36 MATERIALS SCIENCE↗

The detrimental effect of elemental contaminants when using B additions to improve the creep properties of a Ni-based superalloy

The effect of Si contamination when using B to improve the creep properties of a Ni-based superalloy was investigated using advanced characterization techniques and first-principles simulations on alloys with high and low B levels with varying Si contents. The positive effect of B segregation along grain boundaries on the creep properties was mitigated by the presence of Si which showed a similar segregation preference. Density functional theory calculations were used for validation by calculating grain boundary cleavage energies. Silicon was shown to decrease grain boundary cohesion which offsets the positive effect of B.

36 MATERIALS SCIENCE↗

Controlled activation of ZnTe:Cu contacted CdTe solar cells using rapid thermal processing

Back contacts can significantly limit CdTe solar cell performance, reducing both open circuit voltage (Voc) and fill factor (FF). Copper is an essential component of effective back contacts, but its presence in the CdTe absorber creates detrimental recombination centers. Rapid thermal processing (RTP) is demonstrated as a highly effective approach for reducing back contact barriers in CdTe solar cells contacted with ZnTe:Cu buffer layers, substantially improving both FF (473%) and V oc (4850 mV). Current density and quantum efficiency remain essentially unchanged, but a five-fold increase in minority carrier lifetime is observed which is attributed to passivation of recombination sites in the back contact region. Quantitative analysis of secondary ion mass spectrometry shows that the majority of Cu segregates to the Au metallization layer and that the ZnTe buffer appears to inhibit the Cu diffusion into CdTe. 3D imaging of the back contact region using atom probe tomography shows that optimized devices are characterized by preferential segregation of copper to both the Au|ZnTe and CdTe|ZnTe interfaces, perhaps in the form of Cu x Te. Finally, with its low thermal budget the RTP process has been successfully applied to multiple device architectures.

36 MATERIALS SCIENCE↗

First principles investigation of dopants and defect complexes in CdSe$_x$Te$_{1-x}$

Se alloying is a common approach to improve the performance of CdTe solar cells by tuning the bandgap, defect levels, and carrier density. A fundamental understanding of these improvements, specifically the effect of Se alloying on the behavior of defects and dopants in CdTe, remains unclear. Here, in this work, we present a density functional theory (DFT) study of point defect energetics in CdTe and CdSe x Te 1-x with x = 0.25, leading to a comparison of how native defects, dopants (As and Cu), impurities (Cl and O), and related defect complexes behave in CdTe vs CdSe x Te 1-x . Our calculations, performed by combining semi-local and nonlocal hybrid functionals, show a general lowering of the formation energies of native defects as well as substitutional defects formed by As and Cl upon Se addition. For successful p-type doping with As, destabilizing Cl-based defects in the CdSeTe lattice would be essential. We find evidence for some low-energy defect complexes of As, Cl, and O in CdSe 0.25 Te 0.75 . The computed defect formation energies further enable estimates of temperature-dependent defect concentrations and self-consistent Fermi levels. A comparison of defect energetics with the energies of impurity phases reveals that As, Cu, Cl, and O overwhelmingly prefer being segregated to unwanted As 2 O 5 , AsCl 3 , Cd 2 AsCl 2 , and CuO x phases rather than remain at defect sites, but such segregation is less likely to happen in CdSe 0.25 Te 0.75 than in CdTe. Overall, our work presents a list of likely defects and complexes in CdTe and Se-incorporated CdTe, paving the way to explain and mitigate limited dopant activation in experimental observations.

CdTe↗

Resistivity distribution and donor properties of antimony-doped n -type Czochralski silicon ingots

We investigate antimony (Sb)-doped Czochralski-grown silicon as an alternative n-type substrate for photovoltaic applications, and characterize their axial resistivity distribution, donor properties, and mechanical strength. We find that Sb-doped ingots can achieve a more uniform resistivity distribution along the axial direction compared to P-doped counterparts. Dopant concentration profiles in P-doped ingots can be accurately modelled using the standard Scheil's equation, accounting only for dopant segregation during solidification. In contrast, modelling Sb-doped ingots requires consideration of both dopant segregation and evaporation effects to fit the dopant distribution accurately. Using electron paramagnetic resonance spectroscopy at 9 K, we observe two hyperfine lines in P-doped samples, and six hyperfine lines for Sb 121 and eight for Sb 123 isotopes, with the number of hyperfine lines governed by the nuclear spins. We further identify two-atom Sb clustering in the Sb-doped wafers, confirmed through simulations of the additional weak electron paramagnetic resonance peaks. Finally, we find that 140 μm as-cut planar Sb-doped wafers exhibit slightly higher mechanical strength compared to P-doped wafers.

14 SOLAR ENERGY↗

Microstructural and chemical evolution near anode triple phase boundary in Ni/YSZ solid oxide fuel cells

In this study, we report the micro-structural and chemical evolution of anode grain boundaries and triple phase boundary (TPB) junctions of Ni/YSZ anode supported solid oxide fuel cells. A NiO phase was found to develop along the Ni/YSZ interfaces extending to TPBs in the operated cells. The thickness of the NiO ribbon phase remains constant at ~ 5 nm in hydrogen for operating durations up to 540 h. When operating on synthesis gas, an increase in interphase thickness was observed from ~ 11 nm for 24 h of operation to ~ 51 nm for 550 h of operation. YSZ phases are observed to be stable in H{sub 2} over 540 h of operation. However, for the cell operated in syngas for 550 h, a 5–10 nm tetragonal YSZ (t-YSZ) interfacial layer was identified that originated from the Ni/YSZ interfaces. Yttrium species seem to segregate to the interfaces during operation, leading to the formation of t-YSZ in the Y-depleted regions.

Anode↗

Synchrotron X-ray studies of model SOFC cathodes, part I: Thin film cathodes

In this work, we present synchrotron x-ray investigations of thin film La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) model cathodes for solid oxide fuel cells, grown on electrolyte substrates by pulse laser deposition, in situ during half-cell operations. We observed dynamic segregations of cations, such as Sr and Co, on the surfaces of the film cathodes. The effects of temperature, applied potentials, and capping layers on the segregations were investigated using a surfacesensitive technique of total external reflection x-ray fluorescence. We also studied patterned thin film LSCF cathodes using high-resolution micro-beam diffraction measurements. We find chemical expansion decreases for narrow stripes. This suggests the expansion is dominated by the bulk pathway reactions. Lastly, the chemical expansion vs. the distance from the electrode contact was measured at three temperatures and an oxygen vacancy activation energy was estimated to be ~1.4 eV.

36 MATERIALS SCIENCE↗

Deposition-controlled phase separation in CuNb metallic alloys

Vapor co-deposited metal nanocomposites with immiscible components have shown to have several superior properties including mechanical performance, radiation tolerance, and enhanced functionalities. The morphology and structural design of these nanocomposites are important in determining the expression of these properties. The conditions used to deposit thin film nanocomposites are the governing factors in determining the final nanostructure. In this work, we link the effects of process gas pressure, substrate temperature, and sputtering target power on resultant Cu/Nb thin film nanostructures. Here, we find that for films with equiatomic phase fractions of Cu and Nb, inhomogeneous precipitate segregation dominated the structure at lower substrate temperature depositions while higher temperatures distributed the Cu and Nb phases more uniformly. Increasing process gas pressure during deposition lead to a spatially homogeneous, nanocrystalline structure of Cu/Nb. In situ annealing of this sample shows that the phase separated morphology of the two immiscible materials depends on the initial composition. Finally, compositions of Cu and Nb that were highly disparate lead to interface segregation of the minority phase. The morphological evolution observed in the Cu/Nb system is compatible with modified structural zone models for immiscible thin film systems.

36 MATERIALS SCIENCE↗

High-throughput multimodal exploration of a nanocrystalline Cu-Ag library

Sputter-deposited, nanocrystalline Cu-Ag thin films produced across a broad compositional and deposition-parameter space were evaluated to unravel the process-structure-property relationships important for creating hard, conductive electrical contacts and coatings. Combinatorial deposition involving pulsed direct current magnetron sputtering of elemental targets enabled swift examination of nearly the full range of alloy compositions and a relevant portion of deposition atomistics. Several high-throughput characterization modalities were employed to evaluate the chemistry, structure, and properties of the films. The resultant hardness, modulus, film density, crystal texture, and resistivity were analyzed in terms of key deposition characteristics (incident atom kinetic energy and incidence angle) predicted by binary-collision, kinematic Monte Carlo simulations. The study revealed improved hardness, parabolic resistivity dependence on composition, and compositional and process dependencies of film tarnishing. The results are discussed in the context of variations in microstructure and film density. Transmission electron microscopy and X-ray diffraction demonstrate several forms of compositional variation including solute segregation to grain boundaries as well as periodic, intragranular compositional modulations. Annealing of a Cu-rich alloy film exhibiting grain boundary segregation showed that this as-deposited, compositional variation is not stable above 100 °C. Finally, the Cu-Ag system is shown to have potential for hard, conductive, tarnish-resistant and room temperature-stable nanocrystalline thin films across the composition space.

36 MATERIALS SCIENCE↗

Improving the short-wave infrared response of strained GeSn/Ge multiple quantum wells by rapid thermal annealing

In this work, the evolution of structural, optical and optoelectronic properties of coherently strained Ge 0.883 Sn 0.117 /Ge multiple quantum wells (MQWs) grown by molecular beam epitaxy under rapid thermal annealing (RTA) is systematically investigated. The MQW structure remains fully-strained state with RTA at 400 °C or below and disrupts at higher annealing temperatures due to Sn segregation and interdiffusion of Ge and Sn atoms. The GeSn well layers exhibit the strongest absorption in 2.0–2.4 μm after annealing at 400 °C and become transparent above 1.8 μm after RTA at 600 °C or beyond due to serve Sn segregation. Owing to improved crystal quality after RTA at 400 °C, the dark current of the fabricated metal-semiconductor-metal photodetector is effectively lowered by more than two times. Additionally, the responsivities at 1.55 and 2.0 μm are improved by 4.15 and 3.78 folds, respectively, compared to those of the as-grown sample. Here, the results can be an insightful guidance for the development of high-performance short-wave infrared photonic devices based on Sn-containing group-IV low-dimensional structures.

36 MATERIALS SCIENCE↗

Localization of latency-associated nuclear antigen (LANA) on mitotic chromosomes

In latent infection of Kaposi's sarcoma-associated herpesvirus (KSHV), viral gene expression is extremely limited and copy numbers of viral genomes remain constant. Latency-associated nuclear antigen (LANA) is known to have a role in maintaining viral genome copy numbers in growing cells. Several studies have shown that LANA is localized in particular regions on mitotic chromosomes, such as centromeres/pericentromeres. We independently examined the distinct localization of LANA on mitotic chromosomes during mitosis, using super-resolution laser confocal microscopy and correlative fluorescence microscopy–electron microscopy (FM-EM) analyses. We found that the majority of LANA were not localized at particular regions such as telomeres/peritelomeres, centromeres/pericentromeres, and cohesion sites, but at the bodies of condensed chromosomes. Thus, LANA may undergo various interactions with the host factors on the condensed chromosomes in order to tether the viral genome to mitotic chromosomes and realize faithful viral genome segregation during cell division. - Highlights: • This is the first report showing LANA dots on mitotic chromosomes by fluorescent microscopy followed by electron microscopy. • LANA dots localized randomly on condensed chromosomes other than centromere/pericentromere and telomere/peritelomre. • Cellular mitotic checkpoint should not be always involved in the segregation of KSHV genomes in the latency.

60 APPLIED LIFE SCIENCES↗

Mathematical modeling of biomass fuels formation process

The increasing demand for thermal and electric energy in many branches of industry and municipal management accounts for a drastic diminishing of natural resources (fossil fuels). Meanwhile, in numerous technical processes, a huge mass of wastes is produced. A segregated and converted combustible fraction of the wastes, with relatively high calorific value, may be used as a component of formed fuels. The utilization of the formed fuel components from segregated groups of waste in associated processes of co-combustion with conventional fuels causes significant savings resulting from partial replacement of fossil fuels, and reduction of environmental pollution resulting directly from the limitation of waste migration to the environment (soil, atmospheric air, surface and underground water). The realization of technological processes with the utilization of formed fuel in associated thermal systems should be qualified by technical criteria, which means that elementary processes as well as factors of sustainable development, from a global viewpoint, must not be disturbed. The utilization of post-process waste should be preceded by detailed technical, ecological and economic analyses. In order to optimize the mixing process of fuel components, a mathematical model of the forming process was created. The model is defined as a group of data structures which uniquely identify a real process and conversion of this data in algorithms based on a problem of linear programming. The paper also presents the optimization of parameters in the process of forming fuels using a modified simplex algorithm with a polynomial worktime. This model is a datum-point in the numerical modeling of real processes, allowing a precise determination of the optimal elementary composition of formed fuels components, with assumed constraints and decision variables of the task.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Household solid waste characteristics and management in Chittagong, Bangladesh

Solid waste management (SWM) is a multidimensional challenge faced by urban authorities, especially in developing countries like Bangladesh. We investigated per capita waste generation by residents, its composition, and the households' attitudes towards waste management at Rahman Nagar Residential Area, Chittagong, Bangladesh. The study involved a structured questionnaire and encompassed 75 households from five different socioeconomic groups (SEGs): low (LSEG), lower middle (LMSEG), middle (MSEG), upper middle (UMSEG) and high (HSEG). Wastes, collected from all of the groups of households, were segregated and weighed. Waste generation was 1.3 kg/household/day and 0.25 kg/person/day. Household solid waste (HSW) was comprised of nine categories of wastes with vegetable/food waste being the largest component (62%). Vegetable/food waste generation increased from the HSEG (47%) to the LSEG (88%). By weight, 66% of the waste was compostable in nature. The generation of HSW was positively correlated with family size (r{sub xy} = 0.236, p < 0.05), education level (r{sub xy} = 0.244, p < 0.05) and monthly income (r{sub xy} = 0.671, p < 0.01) of the households. Municipal authorities are usually the responsible agencies for solid waste collection and disposal, but the magnitude of the problem is well beyond the ability of any municipal government to tackle. Hence dwellers were found to take the service from the local waste management initiative. Of the respondents, an impressive 44% were willing to pay US$0.3 to US$0.4 per month to waste collectors and it is recommended that service charge be based on the volume of waste generated by households. Almost a quarter (22.7%) of the respondents preferred 12-1 pm as the time period for their waste to be collected. This study adequately shows that household solid waste can be converted from burden to resource through segregation at the source, since people are aware of their role in this direction provided a mechanism to assist them in this pursuit exists and the burden is distributed according to the amount of waste generated.

54 ENVIRONMENTAL SCIENCES↗

Management of immunization solid wastes in Kano State, Nigeria

Inadequate management of waste generated from injection activities can have a negative impact on the community and environment. In this paper, a report on immunization wastes management in Kano State (Nigeria) is presented. Eight local governments were selected randomly and surveyed by the author. Solid wastes generated during the Expanded Programme on Immunization were characterised using two different methods: one by weighing the waste and the other by estimating the volume. Empirical data was obtained on immunization waste generation, segregation, storage, collection, transportation, and disposal; and waste management practices were assessed. The study revealed that immunization offices were accommodated in either in local government buildings, primary health centres or community health care centres. All of the stations demonstrated a high priority for segregation of the infectious wastes. It can be deduced from the data obtained that infectious waste ranged from 67.6% to 76.7% with an average of 70.1% by weight, and 36.0% to 46.1% with an average of 40.1% by volume. Non-infectious waste generated ranged from 23.3% to 32.5% with an average of 29.9% by weight and 53.9% to 64.0% with an average of 59.9% by volume. Out of non-infectious waste (NIFW) and infectious waste (IFW), 66.3% and 62.4% by weight were combustible and 33.7% and 37.6% were non-combustible respectively. An assessment of the treatment revealed that open pit burning and burial and small scale incineration were the common methods of disposal for immunization waste, and some immunization centres employed the services of the state or local government owned solid waste disposal board for final collection and disposal of their immunization waste at government approved sites.

54 ENVIRONMENTAL SCIENCES↗

Sustainable recycling of municipal solid waste in developing countries

This research focuses on recycling in developing countries as one form of sustainable municipal solid waste management (MSWM). Twenty-three case studies provided municipal solid waste (MSW) generation and recovery rates and composition for compilation and assessment. The average MSW generation rate was 0.77 kg/person/day, with recovery rates from 5-40%. The waste streams of 19 of these case studies consisted of 0-70% recyclables and 17-80% organics. Qualitative analysis of all 23 case studies identified barriers or incentives to recycling, which resulted in the development of factors influencing recycling of MSW in developing countries. The factors are government policy, government finances, waste characterization, waste collection and segregation, household education, household economics, MSWM (municipal solid waste management) administration, MSWM personnel education, MSWM plan, local recycled-material market, technological and human resources, and land availability. Necessary and beneficial relationships drawn among these factors revealed the collaborative nature of sustainable MSWM. The functionality of the factor relationships greatly influenced the success of sustainable MSWM. A correlation existed between stakeholder involvement and the three dimensions of sustainability: environment, society, and economy. The only factors driven by all three dimensions (waste collection and segregation, MSWM plan, and local recycled-material market) were those requiring the greatest collaboration with other factors.

54 ENVIRONMENTAL SCIENCES↗