SEARCH · Engineering Papers

Results for “SATELLITES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Navigation Performance of Global Navigation Satellite Systems in the Space Service Volume

GPS has been used for spacecraft navigation for many years center dot In support of this, the US has committed that future GPS satellites will continue to provide signals in the Space Service Volume center dot NASA is working with international agencies to obtain similar commitments from other providers center dot In support of this effort, I simulated multi-constellation navigation in the Space Service Volume In this presentation, I extend the work to examine the navigational benefits and drawbacks of the new constellations center dot A major benefit is the reduced geometric dilution of precision (GDOP). I show that there is a substantial reduction in GDOP by using all of the GNSS constellations center dot The increased number of GNSS satellites broadcasting does produce mutual interference, raising the noise floor. A near/far signal problem can also occur where a nearby satellite drowns out satellites that are far away. - In these simulations, no major effect was observed Typically, the use of multi-constellation GNSS navigation improves GDOP by a factor of two or more over GPS alone center dot In addition, at the higher altitudes, four satellite solutions can be obtained much more often center dot This show the value of having commitments to provide signals in the Space Service Volume Besides a commitment to provide a minimum signal in the Space Service Volume, detailed signal gain information is useful for mission planning center dot Knowledge of group and phase delay over the pattern would also reduce the navigational uncertainty

Force, Dale A.↗

NASA NTRS1960

The Influence of the Solar Radiation Pressure on the Motion of an Artificial Satellite

This article reports an investigation of the effect of solar radiation pressure on the motion of an artificial satellite. The theory has been applied to the orbit of the Vanguard I satellite, and is found to produce significant perturbations in the perigee height of that satellite. In the case of a satellite with a large ratio of area to mass the major terms introduced by solar radiation pressure can reduce the perigee distance at the rate of 1 to 2 km per day, so that the lifetime of the satellite will become considerably shorter than it would be without this effect.

Musen, Peter↗

NASA NTRS2015

The NASA Earth Science Program and Small Satellites

Earth's changing environment impacts every aspect of life on our planet and climate change has profound implications on society. Studying Earth as a single complex system is essential to understanding the causes and consequences of climate change and other global environmental concerns. NASA's Earth Science Division (ESD) shapes an interdisciplinary view of Earth, exploring interactions among the atmosphere, oceans, ice sheets, land surface interior, and life itself. This enables scientists to measure global and climate changes and to inform decisions by Government, other organizations, and people in the United States and around the world. The data collected and results generated are accessible to other agencies and organizations to improve the products and services they provide, including air quality indices, disaster prediction and response, agricultural yield projections, and aviation safety. ESD's Flight Program provides the spacebased observing systems and supporting infrastructure for mission operations and scientific data processing and distribution that support NASA's Earth science research and modeling activities. The Flight Program currently has 21 operating Earth observing space missions, including the recently launched Global Precipitation Measurement (GPM) mission, the Orbiting Carbon Observatory-2 (OCO-2), the Soil Moisture Active Passive (SMAP) mission, and the International Space Station (ISS) RapidSCAT and Cloud-Aerosol Transport System (CATS) instruments. The ESD has 22 more missions and instruments planned for launch over the next decade. These include first and second tier missions from the 2007 Earth Science Decadal Survey, Climate Continuity missions to assure availability of key climate data sets, and small-sized competitively selected orbital missions and instrument missions of opportunity belonging to the Earth Venture (EV) Program. Small satellites (~500 kg or less) are critical contributors to these current and future satellite missions. Some examples are the aforementioned Orbiting Carbon Observatory-2 (OCO-2), the Gravity Recovery and Climate Experiment Follow On (GRACE FO), and the Cyclone Global Navigation Satellite System (CYGNSS) microsatellite constellation. Small satellites also support ESD in space validation and risk reduction of enabling technologies (components and systems). The status of the ESD Flight Program and the role of small satellites will be discussed.

Earth Science Prog & Small Sat↗

NASA NTRS2015

Using Satellite Observations to Infer the Relationship Between Cold Pools and Subsequent Convection Development

Cold pools are increasingly being recognized as important players in the evolution of both shallow and deep convection; hence, the incorporation of cold pool processes into a number of recently developed convective parameterizations. Unfortunately, observations serving to inform cold pool parameterization development are limited to select field programs and limited radar domains. However, a number of recent studies have noted that cold pools are often associated with arcs-lines of shallow clouds traversing 10 100 km in visible satellite imagery. Boundary layer thermodynamic perturbations are plausible at such scales, coincident with such mesoscale features. Atmospheric signatures of features at these spatial scales are potentially observable from satellites. In this presentation, we discuss recent work that uses multi-sensor, high-resolution satellite products for observing mesoscale wind vector fluctuations and boundary layer temperature depressions attributed to cold pools produced by antecedent convection. The relationship to subsequent convection as well as convective system longevity is discussed. As improvements in satellite technology occur and efforts to reduce noise in high-resolution orbital products progress, satellite pixel level (10 km) thermodynamic and dynamic (e.g. mesoscale convergence) parameters can increasingly serve as useful benchmarks for constraining convective parameterization development, including for regimes where organized convection contributes substantially to the cloud and rainfall climatology.

thermodynamics↗

NASA NTRS2016

The Matsu Wheel: A Cloud-Based Framework for Efficient Analysis and Reanalysis of Earth Satellite Imagery

Project Matsu is a collaboration between the Open Commons Consortium and NASA focused on developing open source technology for cloud-based processing of Earth satellite imagery with practical applications to aid in natural disaster detection and relief. Project Matsu has developed an open source cloud-based infrastructure to process, analyze, and reanalyze large collections of hyperspectral satellite image data using OpenStack, Hadoop, MapReduce and related technologies. We describe a framework for efficient analysis of large amounts of data called the Matsu "Wheel." The Matsu Wheel is currently used to process incoming hyperspectral satellite data produced daily by NASA's Earth Observing-1 (EO-1) satellite. The framework allows batches of analytics, scanning for new data, to be applied to data as it flows in. In the Matsu Wheel, the data only need to be accessed and preprocessed once, regardless of the number or types of analytics, which can easily be slotted into the existing framework. The Matsu Wheel system provides a significantly more efficient use of computational resources over alternative methods when the data are large, have high-volume throughput, may require heavy preprocessing, and are typically used for many types of analysis. We also describe our preliminary Wheel analytics, including an anomaly detector for rare spectral signatures or thermal anomalies in hyperspectral data and a land cover classifier that can be used for water and flood detection. Each of these analytics can generate visual reports accessible via the web for the public and interested decision makers. The result products of the analytics are also made accessible through an Open Geospatial Compliant (OGC)-compliant Web Map Service (WMS) for further distribution. The Matsu Wheel allows many shared data services to be performed together to efficiently use resources for processing hyperspectral satellite image data and other, e.g., large environmental datasets that may be analyzed for many purposes.

0↗

NASA NTRS2015

First SNPP Cal/Val Campaign: Satellite and Aircraft Sounding Retrieval Intercomparison

Satellite ultraspectral infrared sensors provide key data records essential for weather forecasting and climate change science. The Suomi National Polar-orbiting Partnership (SNPP) satellite Environmental Data Record (EDR) is retrieved from calibrated ultraspectral radiance so called Sensor Data Record (SDR). It is critical to understand the accuracy of retrieved EDRs, which mainly depends on SDR accuracy (e.g., instrument random noise and absolute accuracy), an ill-posed retrieval system, and radiative transfer model errors. There are few approaches to validate EDR products, e.g., some common methods are to rely on radiosonde measurements, ground-based measurements, and dedicated aircraft campaign providing in-situ measurements of atmosphere and/or employing similar ultraspectral interferometer sounders. Ultraspectral interferometer sounder aboard aircraft measures SDR to retrieve EDR, which is often used to validate satellite measurements of SDR and EDR. The SNPP Calibration/Validation Campaign was conducted during May 2013. The NASA high-altitude aircraft ER-2 that carried ultraspectral interferometer sounders such as the NASA Atmospheric Sounder Testbed-Interferometer (NAST-I) flew under the SNPP satellite that carries the Cross-track Infrared Sounder (CrIS). Here we inter-compare the EDRs produced with different retrieval algorithms from SDRs measured by the sensors from satellite and aircraft. The available dropsonde and radiosonde measurements together with the European Centre for Medium-Range Weather Forecasts (ECMWF) analysis were also used to draw the conclusion from this experiment.

Zhou, Daniel K.↗

NASA NTRS2015

The Rapid Response Radiation Survey (R3S) Mission Using the HiSat Conformal Satellite Architecture

The Rapid Response Radiation Survey (R3S) experiment, designed as a quick turnaround mission to make radiation measurements in Low Earth Orbit (LEO), will fly as a hosted payload in partnership with NovaWurks using their Hyper-integrated Satlet (HISat) architecture. The need for the mission arises as the Nowcast of Atmospheric Ionization Radiation for Aviation Safety (NAIRAS) model moves from a research effort into an operational radiation assessment tool. Currently, airline professionals are the second largest demographic of radiation workers and to date their radiation exposure is undocumented in the USA. The NAIRAS model seeks to fill this information gap. The data collected by R3S, in addition to the complementary data from a NASA Langley Research Center (LaRC) atmospheric balloon mission entitled Radiation Dosimetry Experiment (RaD-X), will validate exposure prediction capabilities of NAIRAS. The R3S mission collects total dose and radiation spectrum measurements using a Teledyne μDosimeter and a Liulin-6SA2 LED spectrometer. These two radiation sensors provide a cross correlated radiometric measurement in combination with the Honeywell HMR2300 Smart Digital Magnetometer. The magnetometer assesses the Earth's magnetic field in the LEO environment and allows radiation dose to be mapped as a function of the Earth's magnetic shielding. R3S is also unique in that the radiation sensors will be exposed on the outer surface of the spacecraft, possibly making this the first measurements of the LEO radiation environment with bare sensors. Viability of R3S as an extremely fast turnaround mission is due, in part, to the nature of the robust, well-defined interfaces of the conformal satellite HiSat Architecture. The HiSat architecture, which was developed with the support of the Defense Advanced Research Projects Agency's (DARPA's) Phoenix Program, enabled the R3S system to advance from the first concept to delivery of preliminary design review (PDR) level documents in 29 calendar days. The architecture allows for interface complexities between the specific devices and the satellite bus to be resolved in a standardized interface control document (ICD). The ICD provided a readymade framework to interface to the modular satellite bus. This modularity allowed for approximately 90% of the R3S system to be designed and fabricated in two months without constraint of the hosting satellite's development cycle. This paper discusses the development of the R3S experiment as made possible by use of the HiSat architecture. The system design and operational modes of the experiment are described, as well as the experiment interfaces to the HiSat satellite via the user defined adapter (UDA) provided by NovaWurks. This paper outlines the steps taken by the project to execute the R3S mission in the 4 months of design, build, and test. Additionally portrayed is the ground work done at LaRC to posture the organization for a fast response and the process by which the opportunity was identified as aligning with key strategic goals. Finally, a description of the engineering process is provided, including the use of facilitated rapid/concurrent engineering sessions, the associated documentation, and the review process employed.

Miller, Nathanael A.↗

NASA NTRS2016

Real-time Identification and Control of Satellite Signal Impairments Solution and Application of the Stratonovich Equation Part 1. Theoretical Development

As satellite communications systems become both more complex and reliant with respect to their operating environment, it has become imperative to be able to identify, during real-time operation, the onset of one or more impairments to the quality of overall communications system integrity. One of the most important aspects to monitor of a satellite link operating within the Earth's atmosphere is the signal fading due to the occurrence of rain and/or phase scintillations. This, of course, must be done in the presence of the associated measurement uncertainty or potentially faulty measurement equipment such as in the Advanced Communication Technology Satellite (ACTS) experiment. In the present work, an approach originally suggested in 1991, and apparently still considered iconoclastic, will be significantly developed and applied to the satellite communications link on which the deleterious composite signal fade is the result of one or many component fade mechanisms. Through the measurement (with the attendant uncertainty or 'error' in the measurement) of such a composite fading satellite signal, it is desired to extract the level of each of the individual fading mechanisms so they can be appropriately mitigated before they impact the overall performance of the communications network. Rather than employing simple-minded deterministic filtering to the real-time fading, the present approach is built around all the models and/or descriptions used to describe the individual fade components, including their dynamic evolution. The latter is usually given by a first-order Langevin equation. This circumstance allows the description of the associated temporal transition probability densities of each of the component processes. By using this description, along with the real-time measurements of the composite fade (along with the measurement errors), one can obtain statistical estimates of the levels of each of the component fading mechanisms as well as their predicted values into the future. This is all accomplished by the use of the well-known Stratonovich integro-differential equation that results from the model of the measured signal fade that is also tailored to adaptively adjust the values of the parameters used in the statistical models of the individual fade mechanisms. Three examples of increasing complexity are addressed and solved for the iterative determination of fade component levels from the measured composite signal fade in the presence of measurement error and, in the last case, with uncertainty in the model parameters.

Countermeasure↗

NASA NTRS2016

Modeling and Simulation of Phased Array Antennas to Support Next-Generation Satellite Design

Developing enhanced simulation capabilities has become a significant priority for the Space Communications and Navigation (SCaN) project at NASA as new space communications technologies are proposed to replace aging NASA communications assets, such as the Tracking and Data Relay Satellite System (TDRSS). When developing the architecture for these new space communications assets, it is important to develop updated modeling and simulation methodologies, such that competing architectures can be weighed against one another and the optimal path forward can be determined. There have been many simulation tools developed here at NASA for the simulation of single RF link budgets, or for the modeling and simulation of an entire network of spacecraft and their supporting SCaN network elements. However, the modeling capabilities are never fully complete and as new technologies are proposed, gaps are identified. One such gap is the ability to rapidly develop high fidelity simulation models of electronically steerable phased array systems. As future relay satellite architectures are proposed that include optical communications links, electronically steerable antennas will become more desirable due to the reduction in platform vibration introduced by mechanically steerable devices. In this research, we investigate how modeling of these antennas can be introduced into out overall simulation and modeling structure. The ultimate goal of this research is two-fold. First, to enable NASA engineers to model various proposed simulation architectures and determine which proposed architecture meets the given architectural requirements. Second, given a set of communications link requirements for a proposed satellite architecture, determine the optimal configuration for a phased array antenna. There is a variety of tools available that can be used to model phased array antennas. To meet our stated goals, the first objective of this research is to compare the subset of tools available to us, trading-off modeling fidelity of the tool with simulation performance. When comparing several proposed architectures, higher- fidelity modeling may be desirable, however, when iterating a proposed set of communication link requirements across ranges of phased array configuration parameters, the practicality of performance becomes a significant requirement. In either case, a minimum simulation - fidelity must be met, regardless of performance considerations, which will be discussed in this research. Given a suitable set of phased array modeling tools, this research then focuses on integration with current SCaN modeling and simulation tools. While properly modeling the antenna elements of a system are vital, this is only a small part of the end-to-end communication path between a satellite and the supporting ground station and/or relay satellite assets. To properly model a proposed simulation architecture, this toolset must be integrated with other commercial and government development tools, such that the overall architecture can be examined in terms of communications, reliability, and cost. In this research, integration with previously developed communication tools is investigated.

Phased Array↗

NASA NTRS2017

Communications for UAS Integration in the NAS Phase 2 Satellite Communications and Terrestrial Extension

In order to provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System, the command and control communications link connecting the ground-based pilot with the unmanned aircraft must be highly reliable and robust, with national and international standards to enable interoperability and certification. Both line-of-sight (LOS) links using terrestrial-based communications and beyond-line-of-sight (BLOS) links using satellite communications, supported by national and international standards, are required for integrated UAS operations. The National Aeronautics and Space Administration (NASA) has undertaken an extensive technology development and test program in order to provide the required technical data needed to enable C2 standards development. NASAs UAS Integration in the National Airspace System (NAS), or UAS in the NAS Project, included as a major element the Command and Control Communications (C2) Subproject, based at NASAs Glenn Research Center. The successful first phase of the C2 Subproject, completed during 2012-2016, focused primarily on line-of-sight communications. Accomplishments included air-ground channel propagation characterization and modeling; CNPC prototype radio development; CNPC radio flight testing; satellite communications spectrum study and interference analysis; and development of C2 LOS communications standards development. The second phase of the C2 Subproject will focus primarily on beyond-line-of-sight communications, although a follow-on activity for terrestrial LOS communications, known as Terrestrial Extension, is also included. In addition to the terrestrial element, Phase 2 also includes technology development and testing activities for Ka-Band BLOS C2 Satellite Communications; Ku-Band BLOS C2 Satellite Communications; Ku-Band Interference and Propagation; and C-Band Satellite Communications. This paper will provide brief overviews of the C2 Subproject and its Phase I accomplishments, followed by a description of the plans for the C2 Subproject Phase 2.

radiofrequency spectrum↗

NASA NTRS2017

Assessment of Satellite-Derived Surface Reflectances by NASA's CAR Airborne Radiometer over Railroad Valley, Nevada

CAR (Cloud Absorption Radiometer) is a multi-angular and multi-spectral airborne radiometer instrument, whose radiometric and geometric characteristics are well calibrated and adjusted before and after each flight campaign. CAR was built by NASA (National Aeronautics and Space Administration) in 1984. On 16 May 2008, a CAR flight campaign took place over the well-known calibration and validation site of Railroad Valley in Nevada (38.504 deg N, 115.692 deg W).The campaign coincided with the overpasses of several key EO (Earth Observation) satellites such as Landsat-7, Envisat and Terra. Thus, there are nearly simultaneous measurements from these satellites and the CAR airborne sensor over the same calibration site. The CAR spectral bands are close to those of most EO satellites. CAR has the ability to cover the whole range of azimuth view angles and a variety of zenith angles depending on altitude and, as a consequence, the biases seen between satellite and CAR measurements due to both unmatched spectral bands and unmatched angles can be significantly reduced. A comparison is presented here between CARs land surface reflectance (BRF or Bidirectional Reflectance Factor) with those derived from Terra/MODIS (MOD09 and MAIAC), Terra/MISR, Envisat/MERIS and Landsat-7. In this study, we utilized CAR data from low altitude flights (approx. 180 m above the surface) in order to minimize the effects of the atmosphere on these measurements and then obtain a valuable ground-truth data set of surface reflectance. Furthermore, this study shows that differences between measurements caused by surface heterogeneity can be tolerated, thanks to the high homogeneity of the study site on the one hand, and on the other hand, to the spatial sampling and the large number of CAR samples. These results demonstrate that satellite BRF measurements over this site are in good agreement with CAR with variable biases across different spectral bands. This is most likely due to residual aerosol effects in the EO derived reflectances.

calibration↗

NASA NTRS2017

Communications for UAS Integration in the NAS Phase 2 - Satellite Communications and Terrestrial Extension

radiofrequency spectrum↗

NASA NTRS2018

Streamlining Ground Station Network Compatibility Test for Small Satellites

A team of eight subject matter experts at NASA Goddard Space Flight Center (GSFC) completed a Lean Six Sigma project to identify process improvements for the compatibility test process for small satellites planning to use the NASA Near Earth Network (NEN). Ground station network compatibility testing is designed to reduce the risk to missions by resolving issues between the spacecraft's flight communication and navigation components and the ground systems prior to launch. Compatibility testing, which consists of a series of tests performed over a period of months and documented in reports, is an important step meant to prevent post-launch anomalies that could lead to expensive troubleshooting or mission failure. Compared to traditional missions, small satellite missions typically have a smaller budget and compressed schedules, which can result in small satellite projects' willingness to accept the risk associated with less comprehensive compatibility testing. Optimization and or refinement of the compatibility test process for small satellite missions could alleviate some of the pressures inherent with these factors. The goal of the Lean Six Sigma project was to develop alternative scalable methods of compatibility testing for small satellites. The Lean Six Sigma approach and the results of the project are reviewed in this paper.

Streamlining↗

NASA NTRS2018

A Multi-Satellite Assimilation and Modeling Platform to Construct a Global and Complete view of the Hydrologic Cycle

What captivates me about the research field of satellite remote sensing of the earth system science is the opportunity to help human beings by addressing challenging questions related to the current and future availability of natural resources for domestic, agricultural, and industrial needs. For example, a continuously varying climate poses a threat to the water resource, not only in developing countries, but also in economically well-developed regions, creating the urgent need to characterize and predict its spatial and temporal availability. Specifically, my curiosity is driven by the challenge of merging cutting-edge space technology and earth observations (i.e., remote sensing) with state-of-the-art models for the purpose of improving our scientific knowledge about the variability and the change of the hydrologic cycle.The only practical way to observe the land surface processes (e.g., hydrologic cycle) on continental to global scales is via satellite remote sensing. Though remote sensing can make spatially comprehensive measurements of various components of the land surface system, it cannot provide direct information on the entire system, and the measurements represent only a snapshot in time. Physical based models may be used to continuously predict the temporal and spatial earth processes, but these predictions are often poor, due to model initialization, parameter and meteorological forcing errors, and inadequate model physics and/or resolution. Thus, an attractive prospect is to combine the strengths of land surface models and observations (and minimize the weaknesses of both) to provide a superior land surface state estimate. This is the goal of land surface data assimilation. Data assimilation provides a better estimate of the environmental states than either models or observations could individually do. The broad concept of data assimilation can be applied to various disciplines such as hydrology, ecology, environmental hazards, agriculture and economy.My research is targeted to integrating multiple satellite information having multi-sensor and multi-resolution assimilation within today's state-of-the-art hydrologic models. Multi-sensor and multi-resolution assimilation techniques represent a necessary milestone in future earth science applications because they offer the capability of comprehensively integrating disparate types of earth observations via deep-learning techniques. A multi-satellite assimilation and modeling platform will ultimately provide a robust and complete dataset to more fully understand earth's dynamics. In fact, the multi-satellite assimilation platforms build a comprehensive description of the earth processes that is geared toward accurately representing the complexity of natural and anthropogenic interactions in land surface processes. Most importantly, these platforms are suitable as decision support tools for applications across different aspects of earth system science.My recent work has focused on recent multi-sensor data assimilation techniques targeted at improving snow, soil moisture, groundwater, and terrestrial water storage hydrological states.

Girotto, Manuela↗

NASA NTRS2018

Impact of Satellite Sea Surface Salinity Observations on ENSO Predictions from the GMAO S2S Forecast System

El Nino/Southern Oscillation (ENSO) has far reaching global climatic impacts and so extending useful ENSO forecasts would be of great benefit for society. However, one key variable that has yet to be fully exploited within coupled forecast systems is accurate estimation of near-surface ocean density. Satellite Sea Surface Salinity (SSS), combined with temperature, help to identify ocean density changes and associated mixing near the ocean surface. We assess the impact of satellite SSS observations for improving near-surface dynamics within ocean analyses and how these impact dynamical ENSO forecasts using the NASA GMAO (Global Modeling and Assimilation Office) Sub-seasonal to Seasonal (S2S_v2.1) coupled forecast system (Molod et al. 2018 - i.e. NASA's contribution to the NMME (National Multi-Model Ensemble) project). For all initialization experiments, all available along-track absolute dynamic topography and in situ observations are assimilated using the LETKF ( Local Ensemble Transform Kalman Filter) scheme similar to Penny et al., 2013. A separate reanalysis additionally assimilates Aquarius V5 (September 2011 to June 2015) and SMAP (Soil Moisture Active Passive) V4 (March 2015 to present) along-track data.We highlight the impact of satellite SSS on ocean reanalyses by comparing validation statistics of experiments that assimilate SSS versus our current prediction system that withholds SSS. We find that near-surface validation versus observed statistics for salinity are slightly degraded when assimilating SSS. This is an expected result due to known biases between SSS (measured by the satellite at approximately 1 centimeter) and in situ measurements (typically measured by Argo floats at 3 meters). On the other hand, a very encouraging result is that both temperature, absolute dynamic topography, and mixed layer statistics are improved with SSS assimilation. Previous work has shown that correcting near-surface density structure via gridded SSS assimilation can improve coupled forecasts. Here we present results of coupled forecasts that are initialized from the GMAO S2S reanalyses that assimilates/withholds along-track (L2) SSS. In particular, we contrast forecasts of the overestimated 2014 El Nino, the big 2015 El Nino, and the minor 2016 La Nina. For each of these ENSO scenarios, assimilation of satellite SSS improves the forecast validation. Improved SSS and density upgrades the mixed layer depth leading to more accurate coupled air/sea interaction.

Hackert, E.↗

NASA NTRS2018

Lessons Learned in Building Long-Term Multi-Satellite Global Precipitation Records

Efforts to construct long-term global precipitation data sets from the decades-long record of satellite (and other) data historically have fallen into one of two categories. Climate Data Records (CDR), such as the Global Precipitation Climatology Project (GPCP), prioritize homogeneity over fine-scale accuracy. On the other hand, High Resolution Precipitation Products (HRPP), such as the Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis (TMPA), emphasize the use of data from all available satellites. For both types of products, experience has shown that it is critical to choose the appropriate reference standard to intercalibrate an ever-evolving constellation of satellite sensors. Towards this end, we have used passive microwave (PMW) in developing GPCP, and combined PMW-radar in TMPA.The launch of the TRMM follow-on Global Precipitation Measurement (GPM) mission in 2014 gave birth to several nearly-global HRPP's, including the Integrated Multi-satellitE Retrievals for GPM (IMERG). Our strategy in refining IMERG has been to first focus on the tropics and mid-latitudes, where we have relatively high confidence, and only more recently begin to expand into the lower-confidence high latitudes. Similarly, although GPCP has provided nearly-global estimates since its inception in the early 1990's, the advent of sensors such as CloudSat has facilitated new efforts to modernize its estimates at high latitudes.For each of these data sets, it is expected that the final merged estimate should tend to track along with its respective calibration standard. Time series depicting GPCP, TMPA, and IMERG will be presented, in order to demonstrate the extent to which this is so. Additionally, comparisons amongst the products will show areas of agreement and highlight areas where further improvements are needed.

Nelkin, Eric J.↗

NASA NTRS2018

Challenges in Development of Online Visualization and Analysis Tools for Satellite Data

Over the years, various online visualization and analysis tools have been developed to facilitate satellite data access and help scientific users around the world to conduct research and develop applications (e.g., data product evaluation, what-if questions, etc.). For those who are new to satellite data products, using them can be a daunting task due to many obstacles in data processing such as data formats, complex data structures, special software packages, unfamiliar terminology, etc., especially when one is not sure whether a dataset is suitable for his/er research project. Even for experienced users, developing software for data processing and analysis can be a costly and time-consuming task. Online visualization tools can overcome many of these difficulties and allow users to focus on scientific questions. For example, Giovanni (the Geospatial Interactive Online Visualization and Analysis Infrastructure, https://giovanni.gsfc.nasa.gov), developed by the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), allows access over 1900 satellite and model variables in 82 measurement groups of 8 disciplines without downloading data and software. Main features include basic functions for data analysis and visualization, data provenance, output data in different formats (ASCII, NetCDF, GeoTIFF), and more. Over the years, ~1700 peer-reviewed publications in different disciplines have been benefited from Giovanni in research activities (e.g. initial investigation, what-if questions, product evaluation). Despite the success of online visualization and analysis tools, challenges and new opportunities still exist and more can be done with new requirements and technology. Examples are: a) how to increase the efficiency of dataset search by enhancing intuitive aspects; b) how to facilitate interdisciplinary research; c) how to provide data quality information; d) how to engage users to participate in data quality assessment; and more. NASA Earth Observing System Data and Information System (EOSDIS) satellite-based data products are processed at various levels ranging from Level 0 to Level 4. While most users use data products at higher levels (Level-3 and 4), products at lower levels are still important for case studies, algorithm development, ground validation, etc. In this presentation, we will use Giovanni as an example to present and discuss challenges and near-future opportunities for satellite data online visualization and analysis tools.

Liu, Zhong↗

NASA NTRS2019

Integrated Multi-Satellite Evaluation for the Global Precipitation Measurement: Impact of Precipitation Types on Spaceborne Precipitation Estimation

Integrated multi-sensor assessment is proposed as a novel approach to advance satellite precipitation validation in order to provide users and algorithm developers with an assessment adequately coping with the varying performances of merged satellite precipitation estimates. Gridded precipitation rates retrieved from space sensors with quasi-global coverage feed numerous applications ranging from water budget studies to forecasting natural hazards caused by extreme events. Characterizing the error structure of satellite precipitation products is recognized as a major issue for the usefulness of these estimates. The Global Precipitation Measurement (GPM) mission aims at unifying precipitation measurements from a constellation of low-earth orbiting (LEO) sensors with various capabilities to detect, classify and quantify precipitation. They are used in combination with geostationary observations to provide gridded precipitation accumulations. The GPM Core Observatory satellite serves as a calibration reference for consistent precipitation retrieval algorithms across the constellation. The propagation of QPE uncertainty from LEO active/passive microwave (PMW) precipitation estimates to gridded QPE is addressed in this study, by focusing on the impact of precipitation typology on QPE from the Level-2 GPM Core Observatory Dual-frequency Precipitation Radar (DPR) to the Microwave Imager (GMI) to Level-3 IMERG precipitation over the Conterminous U.S. A high-resolution surface precipitation used as a consistent reference across scales is derived from the ground radar-based Multi-Radar/Multi-Sensor. While the error structure of the DPR, GMI and subsequent IMERG is complex because of the interaction of various error factors, systematic biases related to precipitation typology are consistently quantified across products. These biases display similar features across Level-2 and Level-3, highlighting the need to better resolve precipitation typology from space and the room for improvement in global-scale precipitation estimates. The integrated analysis and framework proposed herein applies more generally to precipitation estimates from sensors and error sources affecting low-earth orbiting satellites and derived gridded products.

Rainfall↗