Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SALES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Prediction of solubility parameters of lignin and ionic liquids using multi-resolution simulation approaches

The solubility parameter (SP) of a molecular species is a vital feature that indicates polarity and quantifies the ‘like-seeks-like’ principle, which is used in chemistry to screen solvents for dissolution. Recent studies have demonstrated that ionic liquids (ILs) and deep eutectic solvents (DESs) efficiently solubilize lignocellulosic biomass and promote enzymatic saccharification into sugars used for the production of biofuels and value-added chemicals. Understanding the solubility of plant biopolymers, particularly lignin, in ILs and DESs is critical for selecting candidate ILs and DESs for biomass pretreatment; however, experimentally measuring SPs is challenging. Thus, the present study investigates lignin dissolution mechanisms in IL/DES and prediction of the solubility parameters (Hildebrand and Hansen) of lignin, ILs, and DESs using multi-resolution simulation approaches. Here, solubility parameters of the studied compounds were predicted using molecular dynamics (MD) simulations, and the SP of lignin was determined to be 23–27 MPa 1/2 , which was close to the polymeric lignin solubility parameter (24.3–25.5 MPa 1/2 ). The SPs of ILs namely [Ch][Lys], [Ch][Oct], and [Emim][Lys] were predicted to be ~26 MPa 1/2 , which is close to lignin's SPs and resulted in increased biomass delignification. The MD simulated SPs were validated by both the COSMO-RS model and experimental investigations, with the results showing a close agreement between the predicted and experimentally obtained SPs. In addition, the enthalpy of vaporization (ΔH vap ) of ILs/DESs was predicted based on the potential energy of the system, and the ΔH vap of ILs/DESs was around 40–65 kcal mol –1 , which is 5–8 times higher than that of traditional organic solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Depolymerization of lignin for biological conversion through sulfonation and a chelator-mediated Fenton reaction

The generating value from lignin through depolymerization and biological conversion to valuable fuels, chemicals, or intermediates has great promise but is limited by several factors including lack of cost-effective depolymerization methods, toxicity within the breakdown products, and low bioconversion of the breakdown products. High yield depolymerization of natural lignins requires cleaving carbon-carbon bonds in addition to ether bonds. To address that need, we report that a chelator-mediated Fenton reaction can efficiently cleave C-C bonds in sulfonated polymers at or near room temperature, and that unwanted repolymerization can be minimized through optimizing reaction conditions. This method was used to depolymerize lignosulfonate from M w = 28,000 g/mol to M w = 800 g/mol. The breakdown products were characterized by SEC, FTIR and NMR and evaluated for bioavailability. The breakdown products are rich in acid, aldehyde, and alcohol functionalities but are largely devoid of aromatics and aliphatic dienes. A panel of nine organisms were tested for the ability to grow on the breakdown products. Growth at a low level was observed for several monocultures on the depolymerized LS in absence of glucose. Much stronger growth was observed in the presence of 0.2% glucose and for one organism we demonstrate doubling of melanin production in the presence of depolymerized LS. The results suggest that this chelator-mediated Fenton method is a promising new approach for biological conversion of lignin into higher value chemicals or intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-scale computational screening and mechanistic insights of cyclic amines as solvents for improved lignocellulosic biomass processing

A computational screening workflow for the efficient deconstruction of cellulose, lignin and hemicellulose fractions of lignocellulosic biomass using cyclic amines as solvents. Lignocellulosic biomass is a promising feedstock for production of affordable fuels and chemicals from renewable resources. Effective solubilization and subsequent deconstruction of its cellulose, hemicellulose, and lignin fractions is essential for the viability of future biorefineries. This study used quantum chemistry-based equilibrium thermodynamics methods to evaluate the potential of 650 cyclic amines to solubilize cellulose, hemicellulose, and lignin. The activity coefficients of solvent - biopolymer interactions were predicted using the COSMO-RS (COnductor-like Screening MOdel for Real Solvents) method and used to identify cyclic amines that can efficiently dissolve and extract selective fractions of biopolymers during biomass pretreatment. Among the 650 cyclic amines, 1-piperazineethanmaine was predicted to be an effective solvent for extracting all three polymers and was experimentally shown to achieve the highest lignin removal (97.1%). Non-covalent interaction, reduced density gradient and quantum chemical calculations were performed to elucidate the dissolution mechanism of lignin, cellulose and hemicellulose and gain further molecular level insights into the interactions between the cyclic amines and biomass polymers that promote efficient solubilization and extraction. These analyses indicated that 1-piperazineethanmaine and 1-methylimidazole make noncovalent van der Waals, electrostatic interactions and hydrogen bonding with lignin, leading to enhanced lignin removal, while the strong intramolecular hydrogen bonding interactions in cellulose and hemicellulose result in weaker solvent-biopolymer interactions. Overall, the computational approach provided an efficient method for identifying cyclic amines tailored for optimal biomass pretreatment and resulted in the identification of a potential new class of solvents for effective biomass pretreatment.

Kumar, Nikhil↗

Volatile fatty acid extraction from fermentation broth using a hydrophobic ionic liquid and in situ enzymatic esterification

Efficient recovery of volatile fatty acids (VFAs) from fermentation broth is a challenge due to low VFA titers and thus limits the commercialization of VFA production using biological routes. Liquid–liquid extraction using hydrophobic ionic liquids (ILs) shows great promise for the extraction and esterification of hydrophilic VFAs. In this study, several ILs were evaluated to select a water-immiscible and efficient extraction solvent. The selected IL, trihexyltetradecyl phosphonium dibutylphosphate ([P 666,14 ][DBP]), gave a cumulative VFA extraction of around 842.8 mg per g IL. The predicted excess enthalpy (H E ) and logarithmic activity coefficients ln(γ) using the COSMO-RS model were validated with the experimentally obtained VFA recovery from fermentation broth. To understand the extraction mechanism of VFAs, quantum theory of atoms in molecules (QTAIM) and noncovalent interaction (NCI) were performed. The results suggest that long chain fatty acids exhibit strong van der Waals interaction with the DBP anion leading to higher VFA extraction. The enzymatic esterification of VFAs with ethanol in [P 666,14 ][DBP] was optimized using the Box–Behnken response surface design of experiment. Under the optimized conditions, up to 83.7% of hexanoic acid was converted to ethyl esters, while other shorter chain VFAs have lower conversion efficiency (38.3–63.2%).

09 BIOMASS FUELS↗

Molecular beam epitaxy of GaBiAs on (311)B GaAs substrates

We report the growth by molecular beam epitaxy of GaBi{sub x}As{sub 1-x} epilayers on (311)B GaAs substrates. We use high-resolution x-ray diffraction (HRXRD), transmission electron microscopy, and Z-contrast imaging to characterize the structural properties of the as-grown material. We find that the incorporation of Bi into the GaBiAs alloy, as determined by HRXRD, is sizably larger in the (311)B epilayers than in (001) epilayers, giving rise to reduced band-gap energies as obtained by optical transmission spectroscopy.

36 MATERIALS SCIENCE↗

Evidence for Electromagnetic Granularity in the Polycrystalline Iron-Based Superconductor LaO0.89F0.11FeAs

The recently discovered oxypnictide superconductors are layered, low carrier density compounds with many similarities to the high-T{sub c} cuprates. An important question is whether they also exhibit weak-coupling across randomly oriented grain boundaries. In this work we show considerable evidence for such weak coupling by study of the dependence of magnetization in bulk and powdered samples. Bulk sample magnetization curves show very little hysteresis while remanent magnetization shows almost no sample size dependence, even after powdering. We conclude that these samples exhibit substantial electromagnetic granularity on a scale approximating the grain size, though we cannot yet determine whether this is intrinsic or extrinsic.

36 MATERIALS SCIENCE↗

Magnetism and Cluster Glass Dynamics in Geometrically Frustrated LuFe2O4

We report on the magnetic properties of high quality LuFe{sub 2}O{sub 4} single crystals grown by the floating zone method. dc and ac susceptibility measurements and analysis reveal a ferrimagnetic transition at -240 K followed by a re-entrant cluster glass transition below 225 K, with an additional magnetic transition around 170 K. Strong frequency dependence of the real ({chi}') and imaginary ('{double_prime}) parts of the ac susceptibility observed at both these temperatures indicate glassy behavior and we quantitatively fit the data to a cluster glass model, {tau} = {tau}{sub o}(T{sub f}/T{sub g}-1){sup -zv}. Our studies show that these multiple transitions are consistent with the picture of ferrimagnetic clusters in the iron oxide planes with triangular lattice configuration favoring spin frustration and glass dynamics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Small anisotropy, weak thermal fluctuations, and high field superconductivity in Co-doped iron pnictide Ba(Fe1-xCox)2As2

We performed high-field magnetotransport and magnetization measurements on a single crystal of the 122-phase iron pnictide Ba(Fe{sub 1-x}Co{sub x}){sub 2}As{sub 2}. Unlike the high-temperature superconductor cuprates and 1111-phase oxypnictides, Ba(Fe{sub 1-x}Co{sub x}){sub 2}As{sub 2} showed practically no broadening of the resistive transitions under magnetic fields up to 45 T. We report the temperature dependencies of the upper critical field H{sub c2} both parallel and perpendicular to the c-axis, the irreversibility field H{sub irr}{sup c}(T), and a rather unusual symmetric volume pinning force curve F{sub p}(H) suggestive of a strong pinning nanostructure. The anisotropy parameter {gamma} = H{sub c2}{sup ab}/H{sub c2}{sup c} deduced from the slopes of dH{sub c2}{sup ab}/dT = 4.9 T/K and dH{sub c2}{sup c}/dT = 2.5 T/K decreases from -2 near T{sub c}, to -1.5 at lower temperatures, much smaller than {gamma} for 1111 pnictides and high-T{sub c} cuprates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bone Implant Interface Investigation by Synchrotron Radiation X-Ray Microfluorescence

Zinc is known to play a relevant role in growth and development; it has stimulatory effects on in vitro and in vivo bone formation and an inhibitory effect on in vitro osteoclastic bone resorption. The inorganic component of the bone tissue is nonstoichiometric apatite; changes in the composition of hidroxyapatite are subject of studies in order to improve the tissue response after implantation. The objective of this study was to investigate the effect of 0.5% zinc-containing hydroxyapatite in comparison to hydroxyapatite on osseous repair of rabbit's tibia. Cylinders (2x6 mm) of both materials were produced according to the specification of the International Organization for Standardization. Ethics Commission on Teaching and Research in Animals approved this project (HUAP-195/06). Fifteen White New Zealand rabbits were submitted to general anesthesia and two perforations (2 mm) were made in each tibia for implantation of zinc-containing hydroxyapatite cylinders (left tibia) and hydroxyapatite cylinders (right tibia). After 1, 2 and 4 weeks, the animals were killed and one fragment of each tibia with the cylinder was collected and embedded in a methacrylate-based resin and cut into slices (approx200 {mu}m thickness), parallel to the implant's long axis with a precision diamond saw for Synchrotron Radiation X-ray Microfluorescence investigation. The accomplishment of the standard procedures helped the planning, execution and the comparative analysis of the results. The chemical and physical properties of the biomaterials were modified after its implantation and the incorporation of zinc. Both materials are biocompatible and promote osteoconduction and favored bone repair.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Covariance for electromagnetic current for two bosons at higher order in the light front

We show that the electromagnetic current for a system composed by two charged bosons has a structure of many bodies even in the impulse approximation, when described in the time x{sup +}. In terms of the two body component for the bound state, the current contains two body operators. We discuss the process of pair creation by the photon and interpret it as a zero mode contribution to the current and its consequences for the components of currents in the light front.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Distribution of bismuth atoms in epitaxial GaAsBi

The distribution of Bi atoms in epitaxial GaAs{sub (1-x)}Bi{sub x} is analyzed through aberration-corrected Z-contrast images. The relation between the atomic number and the intensity of the images allows quantifying the distribution of Bi atoms in this material. A bidimensional map of Bi atoms is extracted showing areas where nanoclustering is possible and evidencing the location of Bi at As-substitutional positions in the lattice. The distribution of Bi atoms differs from a random spatial pattern of Bi atoms in the material.

36 MATERIALS SCIENCE↗

Simulation of a suite of generic long-pulse neutron instruments to optimize the time structure of the European Spallation Source

We here describe the result of simulations of 15 generic neutron instruments for the long-pulsed European Spallation Source. All instruments have been simulated for 20 different settings of the source time structure, corresponding to pulse lengths between 1 ms and 2 ms; and repetition frequencies between 10 Hz and 25 Hz. The relative change in performance with time structure is given for each instrument, and an unweighted average is calculated. The performance of the instrument suite is proportional to (a) the peak flux and (b) the duty cycle to a power of approximately 0.3. This information is an important input to determining the best accelerator parameters. In addition, we find that in our simple guide systems, most neutrons reaching the sample originate from the central 3-5 cm of the moderator. This result can be used as an input in later optimization of the moderator design. We discuss the relevance and validity of defining a single figure-of-merit for a full facility and compare with evaluations of the individual instrument classes.

43 PARTICLE ACCELERATORS↗

L-asparagine crystals with wide gap semiconductor features: Optical absorption measurements and density functional theory computations

Results of optical absorption measurements are presented together with calculated structural, electronic, and optical properties for the anhydrous monoclinic L-asparagine crystal. Density functional theory (DFT) within the generalized gradient approximation (GGA) including dispersion effects (TS, Grimme) was employed to perform the calculations. The optical absorption measurements revealed that the anhydrous monoclinic L-asparagine crystal is a wide band gap material with 4.95 eV main gap energy. DFT-GGA+TS simulations, on the other hand, produced structural parameters in very good agreement with X-ray data. The lattice parameter differences Δa, Δb, Δc between theory and experiment were as small as 0.020, 0.051, and 0.022 Å, respectively. The calculated band gap energy is smaller than the experimental data by about 15%, with a 4.23 eV indirect band gap corresponding to Z → Γ and Z → β transitions. Three other indirect band gaps of 4.30 eV, 4.32 eV, and 4.36 eV are assigned to α3 → Γ, α1 → Γ, and α2 → Γ transitions, respectively. Δ-sol computations, on the other hand, predict a main band gap of 5.00 eV, just 50 meV above the experimental value. Electronic wavefunctions mainly originating from O 2p–carboxyl, C 2p–side chain, and C 2p–carboxyl orbitals contribute most significantly to the highest valence and lowest conduction energy bands, respectively. By varying the lattice parameters from their converged equilibrium values, we show that the unit cell is less stiff along the b direction than for the a and c directions. Effective mass calculations suggest that hole transport behavior is more anisotropic than electron transport, but the mass values allow for some charge mobility except along a direction perpendicular to the molecular layers of L-asparagine which form the crystal, so anhydrous monoclinic L-asparagine crystals could behave as wide gap semiconductors. Finally, the calculations point to a high degree of optical anisotropy for the absorption and complex dielectric function, with more structured curves for incident light polarized along the 100 and 101 directions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wavelength-independent constant period spin-echo modulated small angle neutron scattering

Spin-Echo Modulated Small Angle Neutron Scattering (SEMSANS) in Time-of-Flight (ToF) mode has been shown to be a promising technique for measuring (very) small angle neutron scattering (SANS) signals and performing quantitative Dark-Field Imaging (DFI), i.e., SANS with 2D spatial resolution. However, the wavelength dependence of the modulation period in the ToF spin-echo mode has so far limited the useful modulation periods to those resolvable with the limited spatial resolution of the detectors available. Here we present our results of an approach to keep the period of the induced modulation constant for the wavelengths utilised in ToF. This is achieved by ramping the magnetic fields in the coils responsible for creating the spatially modulated beam in synchronisation with the neutron pulse, thus keeping the modulation period constant for all wavelengths. Such a setup enables the decoupling of the spatial detector resolution from the resolution of the modulation period by the use of slits or gratings in analogy to the approach in grating-based neutron DFI.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Giant magnetostriction effect near onset of spin reorientation in MnBi

In materials undergoing spontaneous symmetry breaking transitions, the emergence of multiple competing order parameters is pervasive. Employing in-field x-ray diffraction, we investigate the temperature and magnetic field dependence of the crystallographic structure of MnBi, elucidating the microscopic interplay between lattices and spin. The hexagonal phase of MnBi undergoes a spin reorientation transition (TSR), whereby the easy axis direction changes from the c axis to the basal plane. Across TSR, an abrupt symmetry change is accompanied by a clear sign change in the magnetostrictive coefficient, revealing that this transition corresponds to the onset of the spin reorientation. In the vicinity of TSR, a significantly larger in-plane magnetostrictive effect is observed, presenting the emergence of an intermediate phase that is highly susceptible to an applied magnetic field. X-ray linear dichroism shows that asymmetric Bi and Mn p orbitals do not play a role in the spin reorientation. Furthermore, this work suggests that the spin reorientation is caused by structural modification rather than changes in the local electronic configuration, providing a strategy for manipulating the magnetic anisotropy by external strain.

36 MATERIALS SCIENCE↗

First principle study of magnetism and vacancy energetics in a near equimolar NiFeMnCr high entropy alloy

We report the results of ab initio calculations of a novel NiFeMnCr high entropy alloy (HEA) with potential applications as a high performance structural material. The bulk and defect property variations due to chemical disordering and magnetic frustration have been studied using both supercell and coherent potential approximation-based techniques. While magnetic frustration due to the presence of multiple 3d transition metals can severely affect the accuracy of vacancy formation energy in first-principles calculations, this effect should be suppressed at intermediate and high temperatures. An efficient approach to evaluate the chemical potential in HEA is constructed and implemented. Vacancy formation energies are computed based on the chemical potential. The statistical distribution of formation energies is weakly dependent upon the chemical identity of the vacancy. On the other hand, the calculated vacancy migration energies show that Fe is more likely to have a large migration barrier than Cr, Mn, or Ni. Finally, atomic-level stresses are computed. A qualitative model to explain the elemental segregation trend in HEA is built upon the atomic-level stress calculation results and provides a reasonable qualitative agreement with ion irradiation experimental data of a NiFeMnCr HEA.

36 MATERIALS SCIENCE↗