Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Antimonite Complexation with Thiol and Carboxyl/Phenol Groups of Peat Organic Matter

Peatlands and other wetlands with abundant natural organic matter (NOM) are important sinks for antimony (Sb). While formation of Sb(III) sulfide phases or Sb(III) binding to NOM are discussed to decrease Sb mobility, the exact binding mechanisms remain elusive. Here, we reacted increasing sulfide concentrations with purified model peat at pH 6, forming reduced organic sulfur species, and subsequently equilibrated the reaction products with 50 μM of antimonite under anoxic conditions. Sulfur solid-phase speciation and the local binding environment of Sb were analyzed using X-ray absorption spectroscopy. We found that 85% of antimonite was sorbed by untreated peat. Sulfide-reacted peat increased sorption to 98%. Shell-by-shell fitting of Sb K -edge X-ray absorption fine structure spectra revealed Sb in untreated peat bound to carboxyl or phenol groups with average Sb–carbon distances of ~2.90 Å. With increasing content of reduced organic sulfur, Sb was progressively coordinated to S atoms at distances of ~2.45 Å and Sb–carbon distances of ~3.33 Å, suggesting increasing Sb–thiol binding. Iterative target factor analysis allowed exclusion of reduced inorganic Sb–sulfur phases with similar Sb–sulfur distances. In conclusion, even when free sulfide concentrations are too low for formation of Sb–sulfur precipitates, peat NOM can sequester Sb in anoxic, sulfur-enriched environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Inorganic Sulfate and Volatile Nonsulfated Products from Heterogeneous Hydroxyl Radical Oxidation of 2-Methyltetrol Sulfate Aerosols: Mechanisms and Atmospheric Implications

Chemical transformation of 2-methyltetrol sulfates (2-MTS), key isoprene-derived secondary organic aerosol (SOA) constituents, through heterogeneous hydroxyl radical ( • OH) oxidation can result in the formation of previously unidentified atmospheric organosulfates (OSs). However, detected OSs cannot fully account for the sulfur content released from reacted 2-MTS, indicating the existence of sulfur in forms other than OSs, such as inorganic sulfates. This work investigated the formation of inorganic sulfates through heterogeneous • OH oxidation of 2-MTS aerosols. Remarkably, high yields of inorganic sulfates, defined as the moles of inorganic sulfates produced per mole of reacted 2-MTS, were observed in the range from 0.48 ± 0.07 to 0.68 ± 0.07. These could be explained by the production of sulfate (SO 4 •- ) and sulfite (SO 3 •- ) radicals through the cleavage of C-O(S) and (C)O-S bonds, followed by aerosol-phase reactions. Additionally, non-sulfated products resulting from bond cleavage were likely volatile and evaporated into gas phase, as evidenced by observed aerosol mass loss (up to 25%) and concurrent size reduction upon oxidation. This investigation highlights the significant transformation of sulfur from its organic to inorganic forms during the heterogeneous oxidation of 2-MTS aerosols, potentially influencing the physicochemical properties and environmental impacts of isoprene-derived SOA.

54 ENVIRONMENTAL SCIENCES↗

Effects of Salinity-Induced Chemical Reactions on Biotite Wettability Changes under Geologic CO 2 Sequestration Conditions

The wettability of rocks and minerals significantly affects the safety and efficiency of energy-related subsurface operations. Salinity is an important controlling factor in terms of wettability but has received limited attention. We studied the effects of salinity-induced chemical reactions on biotite's wettability changes under relevant subsurface conditions. Biotite was reacted at 95 °C and 102 atm of CO 2 for 70 h in solutions with salinities of 0, 0.1, 0.5, and 1.0 M NaCl. Then, static and dynamic water contact angles on reacted biotite basal surfaces were measured using a captive drop method. As a result of enhanced biotite dissolution at higher salinities, increased roughness, more negatively charged surfaces, and higher densities of hydroxyl groups on the biotite surfaces made biotite basal surface more hydrophilic. These results provide new information about the interplay of chemical reactions and wettability alterations of minerals, providing a better understanding of CO 2 transport in subsurface environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of the Reactive CO 2 Surface Flux in Electrocatalytic Aqueous Flow Reactors

We study how the mass transfer of a chemical species in shear flow is suppressed by the production of a second species that partially reacts away the first species. The second species is produced at the surface with the first species as a reactant. Our work is directly motivated by electrochemical CO 2 reduction in aqueous flow reactors, where OH– molecules generated by the CO evolution reaction react away CO 2 molecules, ultimately inhibiting the mass transfer of CO 2 to the cathode surface. We derive a simple approximation of the Sherwood number, a dimensionless measure of the mass flux into the surface, as a function of the Péclet number, surface Damköhler number, and bulk Damköhler number, and we compare our approximation to numerical solutions of the governing equations. We find that in the diffusion-limited regime, the Sherwood number is well described by the classical Graetz-Lévêque result reduced by a reaction factor due to the competing bulk reaction; with the stoichiometry relevant to electrochemical CO 2 reduction, this reaction factor is 1/2. While the model problem we solve provides insight into how OH– production affects CO 2 mass transfer, experimental systems often involve more complex chemistry. We thus also show how a common buffered electrolyte, KHCO 3 , affects our results.

30 DIRECT ENERGY CONVERSION↗

Unraveling the Role of Glycine in K 2 CO 3 Solvent for CO 2 Removal

Carbon dioxide (CO 2 ), a main composition of greenhouse gases, is believed to be responsible for global warming. Both potassium carbonate (K 2 CO 3 ) and amino acids have been studied for CO 2 removal. In this study, for the first time, carbamate formation in the absence of CO 2 was discovered in K 2 CO 3 solvents when small amounts of amino acids like glycine were added, and the mechanism of carbamate formation and CO 2 absorption in such solvents are detailed and supported the observed fast CO 2 absorption in the presence of amino acids. Here, in the mixed solvent of K 2 CO 3 and glycine, bicarbonate and hydroxide were formed from carbonate hydrolysis, and the deprotonated amino acid reacted with bicarbonate to form carbamate in the absence of CO 2 and, in the presence of CO 2 , reacted with CO 2 to form carbamate which could subsequently hydrolyze into bicarbonate. As a result, amino acid (even with a small amount) significantly enhanced the CO 2 absorption kinetics in the mixed solvents, and a high CO 2 loading (0.62 mol CO 2 /mol K 2 CO 3 ) was achieved in multiple (e.g., 10) cycles. Such mixed solvents of K 2 CO 3 and amino acid therefore may overcome the limitations of each individual component and may be ideal candidates for CO 2 removal.

36 MATERIALS SCIENCE↗

Formation Pathway of Wurtzite-like Cu 2 ZnSnSe 4 Nanocrystals

Cu 2 ZnSnSe 4 is a direct band gap semiconductor composed of Earth-abundant elements, making it an attractive material for thin film photovoltaic technologies. Cu 2 ZnSnSe 4 crystallizes in the kesterite structure type as a bulk material, but it can also crystallize in a metastable wurtzite-like crystal structure when synthesized on the nanoscale. The wurtzite-like polymorph introduces unique and useful properties to Cu 2 ZnSnSe 4 materials, including widely tunable band gaps and superior composi-tional flexibility as compared to kesterite Cu 2 ZnSnSe 4 . Here, we investigate the formation pathway of colloidally prepared wurtzite-like Cu 2 ZnSnSe 4 nanocrystals. We show that this quaternary material forms through a chain of reactions, starting with binary Cu 3 Se 2 nanocrystals that, due to both kinetic and thermodynamic reasons, preferentially react with tin to yield hexagonal copper tin selenide intermediates. Furthermore, these ternary intermediates then react with zinc to form the resulting wurtzite-like Cu 2 ZnSnSe 4 nanocrystals. Based on this formation pathway, we suggest synthetic methods that may prevent the for-mation of unwanted impurity phases that are known to hamper the efficiency of Cu 2 ZnSnSe 4 -based optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Double Intramolecular 1,2 C–H Addition of o -Methyl Groups To Form Ruthenium Pincer Double Tuck-In Complexes

Ruthenium pincer complexes have a rich history of coordination and reaction chemistries. In this work, we report our discoveries of previously unreported Ru pincer coordination geometries. We found that mono tuck-in κ 4 -ArPN H PRuLCl complexes react with NaN(SiMe 3 ) 2 producing double tuck-in mer-κ 5 -ArPN H PRuL complexes. Interestingly, when κ 4 -MesPN H PRuCl is dehydrohalogenated, the resulting double tuck-in complex binds N 2 , forming the nitrogen complex κ 5 -MesPN H PRuN 2 . Further, the mer-κ 5 -ArPN H PRuL complexes thermally isomerize to the fac-κ 5 -ArPN H PRuL isomers, which is an uncommon reaction for pincer complexes. The mer-κ 5 -ArPN H PRuL complexes react with CO and CO 2 to form amide κ 4 -ArPN H PRu(CO)L or carbamate κ 5 -ArPN(CO 2 )PRuL complexes, respectively, supporting the hypothesis that the κ 4 -ArPNPRuL amide intermediates are accessible and reactive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Independent Control of Optical and Explosive Properties: Pyrazole–Tetrazine Complexes of First Row Transition Metals

In this study, complexes of 3-amino-6-(3,5-dimethylpyrazole)tetrazine) (NH 2 TzDMP, 1) and 3-(3,3'-dinitroazetidine)-6-(3,5-dimethylpyrazole)tetrazine) (DNAZTzDMP, 2) with first row transition metal centers were synthesized. Reactions of Fe II (H 2 O) 6 (BF 4 ) 2 and Fe(NO 3 ) 3 ·9H 2 O with 1 and 2 both led to complexes of the form [(RTzDMP) 3 Fe]X 2 (X = BF 4 , R = NH 2 (3), DNAZ (4); X = NO 3 , R = NH 2 (5), DNAZ (6)), which showed intense MLCT bands in the visible region of the spectrum. Ligands 1 and 2 also reacted with Cu II (NO 3 ) 2 ·5/2H 2 O to form [(RTzDMP) 2 Cu(NO 3 )][NO 3 ] (R = NH 2 (7), DNAZ (8)) in addition to reacting with Cu I (CH 3 CN) 4 (PF 6 ) to form [(RTzDMP) 2 Cu][PF 6 ] (R = NH 2 (9), DNAZ (10)). Finally, reactions of 1 and 2 with Co(NO 3 ) 2 ·6H 2 O and Ni(NO 3 ) 2 ·6H 2 O led to [(NH 2 TzDMP) 2 Co(H 2 O) (NO 3 )][NO 3 ] (11), [(DNAZTzDMP) 2 Co(H 2 O) 2 ][NO 3 ] 2 (12), [(NH 2 TzDMP) 3 Ni][NO 3 ] 2 (13), and [(DNAZTzDMP) 2 Ni(H 2 O) 2 ][NO 3 ] 2 (14). The complexes display rich electrochemical and photophysical properties that are unaffected by derivation with explosive groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and Theoretical Study of CO 2 Insertion into Ruthenium Hydride Complexes

The ruthenium hydride [RuH(CNN)(dppb)] (1; CNN = 2-aminomethyl-6-tolylpyridine, dppb = 1,4-bis(diphenylphosphino)butane) reacts rapidly and irreversibly with CO 2 under ambient conditions to yield the corresponding Ru formate complex 2. In contrast, the Ru hydride 1 reacts with acetone reversibly to generate the Ru isopropoxide, with the reaction free energy $ΔG°$ 298 K $ = -3.1$ kcal/mol measured by 1 H NMR in tetrahydrofuran-$d_8$. Density functional theory (DFT), calibrated to the experimentally measured free energies of ketone insertion, was used to evaluate and compare the mechanism and energetics of insertion of acetone and CO 2 into the Ru–hydride bond of 1. The calculated reaction coordinate for acetone insertion involves a stepwise outer-sphere dihydrogen transfer to acetone via hydride transfer from the metal and proton transfer from the N–H group on the CNN ligand. In contrast, the lowest energy pathway calculated for CO 2 insertion proceeds by an initial Ru–H hydride transfer to CO 2 followed by rotation of the resulting N–H-stabilized formate to a Ru–O-bound formate. DFT calculations were used to evaluate the influence of the ancillary ligands on the thermodynamics of CO 2 insertion, revealing that increasing the $π$ acidity of the ligand cis to the hydride ligand and increasing the $σ$ basicity of the ligand trans to it decreases the free energy of CO 2 insertion, providing a strategy for the design of metal hydride systems capable of reversible, ergoneutral interconversion of CO 2 and formate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Nd(II) and Nd(III) Ions on the Speciation and Kinetic Dynamics of Radiolytic Transients in Molten LiCl-KCl Eutectic Salt Mixtures

In the pyrochemical reprocessing of used nuclear fuel, understanding the effects of ionizing radiation on the chemical behavior of fission products in molten chloride eutectic salt is crucial. Here, this study investigates the impact of radiation on the chemical and kinetic speciation of Nd ions in molten LiCl-KCl eutectic, which are challenging to separate due to their multivalent oxidation states and comproportionation reactions. Electron pulse radiolysis techniques were used to determine transient absorption spectra, chemical kinetics, and activation parameters for the reaction of Nd ions with the primary products of molten LiCl-KCl eutectic radiolysis: the solvated electron (e S - ) and dichlorine radical anion (Cl 2 •- ). Initially, Nd(III) reacted rapidly with e S - , forming Nd(II) with a second-order rate coefficient of k = (4.54 ± 0.07) × 10 10 M -1 s -1 at 673 K. The resulting Nd(II) ions then reacted slowly with Cl 2 •- , regenerating Nd(III) with an estimated rate of k = (1.72 ± 0.04) × 10 10 M -1 s -1 at 673 K. Additionally, the comproportionation reaction of Nd(III) and Nd(s) to form Nd(II) was monitored chemically and electrochemically. This work suggests that the comproportionation reaction of Nd(III) with Nd(s) to form Nd(II) is unstable in molten LiCl-KCl eutectic.

36 - MATERIALS SCIENCE↗

Revealing Disparate Chemistries of Protactinium and Uranium. Synthesis of the Molecular Uranium Tetroxide Anion, UO 4 –

The synthesis, reactivity, structures, and bonding in gas-phase binary and complex oxide anion molecules of protactinium and uranium have been studied by experiment and theory. The oxalate ions, An V O 2 (C 2 O 4 ) - , where An = Pa or U, are essentially actinyl ions, An V O 2 + , coordinated by an oxalate dianion. Both react with water to yield the pentavalent hydroxides, An V O(OH) 2 (C 2 O 4 ) - . The chemistry of Pa and U becomes divergent for reactions that result in oxidation: whereas Pa VI is inaccessible, U VI is very stable. The U V O 2 (C 2 O 4 ) - complex exhibits a remarkable spontaneous exothermic replacement of the oxalate ligand by O 2 to yield UO 4 - and two CO 2 molecules. The structure of the uranium tetroxide anion is computed to correspond to distorted uranyl, U VI O 2 2+ , coordinated in the equatorial plane by two equivalent O atoms each having formal charges of -1.5 and U-O bond orders intermediate between single and double. The unreactive nature of Pa V O 2 (C 2 O 4 ) - toward O 2 is a manifestation of the resistance toward oxidation of Pa V , and clearly reveals the disparate chemistries of Pa and U. The uranium tetroxide anion, UO 4 - , reacts with water to yield UO 5 H 2 - . Infrared spectra obtained for UO 5 H 2 - confirm the computed lowest-energy structure, UO 3 (OH) 2 -

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO Displacement in an Oxidative Addition of Primary Silanes to Rhodium(I)

The rhodium dicarbonyl {PhB(Ox Me2 ) 2 Im Mes }Rh(CO) 2 (1) and primary silanes react by oxidative addition of a nonpolar Si–H bond and, uniquely, a thermal dissociation of CO. These reactions are reversible, and kinetic measurements model the approach to equilibrium. Thus, 1 and RSiH 3 react by oxidative addition at room temperature in the dark, even in CO-saturated solutions. The oxidative addition reaction is first-order in both 1 and RSiH 3 , with rate constants for oxidative addition of PhSiH 3 and PhSiD 3 revealing k H / k D ~ 1. The reverse reaction, reductive elimination of Si–H from {PhB(Ox Me 2 ) 2 Im Mes }RhH(SiH 2 R)CO (2), is also first-order in [2] and depends on [CO]. The equilibrium concentrations, determined over a 30 °C temperature range, provide Δ H ° = –5.5 ± 0.2 kcal/mol and Δ S ° = –16 ± 1 cal·mol –1 K –1 (for 1 ⇌ 2). The rate laws and activation parameters for oxidative addition (Δ H ‡ = 11 ± 1 kcal·mol –1 and Δ S ‡ = –26 ± 3 cal·mol –1 ·K –1 ) and reductive elimination (Δ H ‡ = 17 ± 1 kcal·mol –1 and Δ S ‡ = –10 ± 3 cal·mol –1 K –1 ), particularly the negative activation entropy for both forward and reverse reactions, suggest the transition state of the rate-determining step contains {PhB(Ox Me 2 ) 2 Im Mes }Rh(CO) 2 and RSiH 3 . Comparison of a series of primary silanes reveals that oxidative addition of arylsilanes is ca. 5× faster than alkylsilanes, whereas reductive elimination of Rh–Si/Rh–H from alkylsilyl and arylsilyl rhodium(III) occurs with similar rate constants. Furthermore, the equilibrium constant K e for oxidative addition of arylsilanes is >1, whereas reductive elimination is favored for alkylsilanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectroscopic Characterization of $μ$-$η$ 1 :$η$ 1 -Peroxo Ligands Formed by Reaction of Dioxygen with Electron-Rich Iridium Clusters

Although oxygen is a common ligand in supported metal catalysts, its coordination has been challenging to elucidate. Herein we characterize a diiridium complex that has been previously shown by X-ray diffraction crystallography to incorporate a μ-η 1 :η 1 -peroxo ligand. We observe markedly enhanced intensity at 788 cm -1 in the Raman spectrum of this complex, which is a consequence of bonding of the peroxo ligand but does not shift upon 18 O labeling. Electronic structure calculations at the density functional theory level suggest that this increase in Raman intensity results from bands associated with rocking of CH 2 substituents directly attached to P(Ph) 2 groups coupling with the O-O band. These results provide part of the foundation for understanding oxygen ligands on a silica-supported tetrairidium carbonyl cluster stabilized with bulky electron-donating phosphine ligands [ p-tert -butyl-calix[4]arene(OPr) 3 (OCH 2 PPh 2 ) (Ph = phenyl; Pr = propyl)]. Reaction of the cluster with O2 also led to the growing in of a Raman band at 788 cm -1 , similar to that in the diiridium complex and also assigned to the bonding of a bridging peroxo ligand. Infrared spectra recorded as the supported cluster reacted in sequential exposures to (i) H 2 , (ii) O 2 , (iii) H 2 , and (iv) CO indicate that two bridging peroxo ligands were bonded irreversibly per tetrairidium cluster, replacing bridging carbonyl ligands without altering either the cluster frame or the phosphine ligands. X-ray absorption near edge and infrared spectra include isosbestic points signifying a stoichiometrically simple reaction of the cluster with O 2 , and mass spectra of the effluent gas show that CO 2 formed by oxidation of one terminal CO ligand per cluster as H 2 (and not H 2 O) formed, evidence that hydride ligands had been present on the cluster following treatment (i). The understanding of how O 2 reacts with the metal polyhedron provides a foundation for understanding of how oxidation catalysis may proceed on the surfaces of noble metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CyProduct: A software tool for accurately predicting the byproducts of human cytochrome P450 metabolism

In silico metabolism prediction is a cheminformatic task of autonomously predicting the set of metabolic byproducts produced from a specified molecule and a set of enzymes or reactions. Here we describe a novel machine-learned in silico cytochrome P450 (CYP450) metabolism prediction suite, called CyProduct, that accurately predicts metabolic byproducts for a specified molecule and a human CYP450 isoform. It includes three modules: (1) CypReact, a tool that predicts if the query compound reacts with a given CYP450 enzyme; (2) CypBoM, a tool that accurately predicts the “bond site” of the reaction (i.e., which specific bonds within the query molecule react with the CYP isoform); and (3) MetaboGen, a tool that generates the metabolic byproducts based on CypBoM’s bond-site prediction. CyProduct predicts metabolic biotransformation products for each of the nine most important human CYP450 enzymes. CypBoM uses an important new concept called “Bond of Metabolism” (BoM), which extends the traditional “Site of Metabolism" (SoM) by specifying the information about the set of chemical bonds that is modified or formed in a metabolic reaction (rather than the specific atom). We created a BoM database for 3487 CYP450-mediated Phase I reactions, then used this to train the CypBoM Predictor to predict the reactive bond locations on substrate molecules. CypBoM Predictor’s cross-validated Jaccard score for reactive bond prediction ranged from 0.380 to 0.452 over the nine CYP450 enzymes. Over variants of a test set of 72 known CYP450 substrates and 30 non-reactants, CyProduct outperformed the other packages -- including ADMET Predictor, BioTransformer and GLORY -- by an average of 200% (wrt Jaccard score) in terms of predicting metabolites. The CyProduct suite and the datasets are freely available at https://bitbucket.org/wishartlab/cyproduct/src/master/.

Machine learning, Cytochrome P450, Metabolism pred↗

Evaluating the Chemical Reactivity of DFT-Simulated Liquid Water with Hydrated Electrons via the Dual Descriptor

Modeling the various properties of liquid water, particularly its reactivity, has been a longstanding challenge for simulation methods. Recently, ab initio simulations based on density functional theory (DFT) have come to the fore as tenable methods for calculating the properties and reactivity of water, with varying degrees of success for different exchange-correlation functionals. In particular, hybrid-GGA and meta-GGA functionals have been shown to reproduce many of the structural, dynamical, and energetic properties of water to a high degree of accuracy relative to their computational cost. Here, we show that the dual descriptor (DD) measure of nucleophilicity and electrophilicity, which is sometimes used to elucidate organic chemistry reaction mechanisms, can also be used to characterize the reactivity of DFTsimulated liquid water. The DD is especially apt for understanding the reactivity of excess electrons with water as its calculation explicitly involves adding and removing an excess electron from a reference system. We use the DD to explore the reactivity of water simulated using three different DFT functionals: the LDA functional (LDA), a hybrid-GGA functional (PBE0), and a hybrid meta- GGA functional (SCAN0). Using the DD, we show that the SCAN0 functional with the standard 25% Hartree–Fock exchange produces simulated liquid water with many regions that are far more reactive than either PBE0 or LDA. To understand the implications of these highly reactive regions, we then add a strong nucleophile in the form of an excess electron and find that although PBE0 and LDA predict stable hydrated electrons, the excess electron reacts nearly instantaneously with SCAN0 water via proton abstraction to form a hydrogen atom and hydroxide ion. We show that the DD provides the ability to not only predict whether or not liquid water will react with a hydrated electron but also which particular waters will be involved solely from analyzing pure water configurations generated with each functional. We rationalize this result in terms of the known trap-seeking behavior of injected hydrated electrons, which are able to find the most electronegative region in bulk water. These results highlight the utility of the dual descriptor as a fast and interpretable method for investigating condensed-phase reactivity with excess electrons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupled Interfacial and Bulk Kinetics Govern the Timescales of Multiphase Ozonolysis Reactions

Chemical transformations in aerosols impact the lifetime of particle phase species, the fate of atmospheric pollutants, and both climate- and health-relevant aerosol properties. Timescales for multiphase reactions of ozone in atmospheric aqueous phases are governed by coupled kinetic processes between the gas phase, the particle interface, and its bulk, which respond dynamically to reactive consumption of O 3 . However, models of atmospheric aerosol reactivity often do not account for the coupled nature of multiphase processes. Herein, to examine these dynamics, we use new and prior experimental observations of aqueous droplet reaction kinetics, including three systems with a range of surface affinities and ozonolysis rate coefficients ( trans -aconitic acid (C 6 H 6 O 6 ), maleic acid (C 4 H 4 O 4 ), and sodium nitrite (NaNO 2 )). Using literature rate coefficients and thermodynamic properties, we constrain a simple two-compartment stochastic kinetic model which resolves the interface from the particle bulk and represents O 3 partitioning, diffusion, and reaction as a coupled kinetic system. Our kinetic model accurately predicts decay kinetics across all three systems, demonstrating that both the thermodynamic properties of O 3 and the coupled kinetic and diffusion processes are key to making accurate predictions. An enhanced concentration of adsorbed O 3 , compared to gas and bulk phases is rapidly maintained and remains constant even as O 3 is consumed by reaction. Multiphase systems dynamically seek to achieve equilibrium in response to reactive O 3 loss, but this is hampered at solute concentrations relevant to aqueous aerosol by the rate of O 3 arrival in the bulk by diffusion. As a result, bulk-phase O 3 becomes depleted from its Henry's law solubility. This bulk-phase O 3 depletion limits reaction timescales for relatively slow-reacting organic solutes with low interfacial affinity (i.e., trans-aconitic and maleic acids, with k rxn ≈ 10 3 -10 4 M -1 s -1 ), which is in contrast to fast-reacting solutes with higher surface affinity (i.e., nitrite, with k rxn ≈ 10 5 M -1 s -1 ) where surface reactions strongly impact the observed decay kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion-Limited Kinetics in Reactive Systems

A proper representation of chemical kinetics is vital to understanding, modeling, and optimizing many important chemical processes. In liquid and surface phases, where diffusion is slow, the rate at which the reactants diffuse together limits the overall rate of many elementary reactions. Commonly, the textbook Smoluchowski theory is utilized to estimate effective rate coefficients in the liquid phase. On surfaces, modelers commonly resort to much more complex and expensive Kinetic Monte Carlo (KMC) simulations. Here, in this study, we extend the Smoluchowski model to allow the diffusing species to undergo chemical reactions and derive analytical formulas for the diffusion-limited rate coefficients for 3D, 2D, and 2D/3D interface cases. With these equations, we are able to demonstrate that when species react faster than they diffuse they can react orders of magnitude faster than predicted by Smoluchowski theory, through what we term “the reactive transport effect”. We validate the derived steady-state equations against particle Monte Carlo (PMC) simulations, KMC simulations, and non-steady-state solutions. Furthermore, using PMC and KMC simulations, we propose corrections that agree with all limits and the computed data for the 2D and 2D/3D interface steady-state equations, accounting for unique limitations in the associated derived equations. Additionally, we derive equations to handle couplings between diffusion-limited rate coefficients in reaction networks. We believe these equations should make it possible to run much more accurate mean-field simulations of liquids, surfaces, and liquid–surface interfaces accounting for diffusion limitations and the reactive transport effect.

Johnson, Matthew Sean↗

Resonance stabilization effects on ketone autoxidation: Isomer-specific cyclic ether and ketohydroperoxide formation in the low-temperature (400–625 K) oxidation of diethyl ketone

Here, the pulsed photolytic chlorine-initiated oxidation of diethyl ketone [DEK; (CH 3 CH 2 ) 2 C=O], 2,2,4,4- d 4 -DEK [ d 4 -DEK; (CH 3 CD 2 ) 2 C=O], and 1,1,1,5,5,5-d 6 -DEK [ d 6 -DEK; (CD 3 CH 2 ) 2 C=O] is studied at 8 torr and 1–2 atm and from 400–625 K. Cl atoms produced by laser photolysis react with diethyl ketone to form either primary (3-pentan-on-1-yl, R P ) or secondary (3-pentan-on-2-yl, R S ) radicals, which in turn react with O 2 . Multiplexed time-of-flight mass spectrometry, coupled to either a hydrogen discharge lamp or tunable synchrotron photoionizing radiation, is used to detect products as a function of mass, time, and photon energy. At 8 torr, the nature of the chain propagating cyclic ether + OH channel changes as a function of temperature. At 450 K, the production of OH is mainly in conjunction with formation of 2,4-dimethyloxetan-3-one, resulting from reaction of the resonance-stabilized secondary R S with O 2 . In contrast, at 550 K and 8 torr, 2-methyl-tetrahydrofuran-3-one, originating from oxidation of the primary radical (RP), is observed as the dominant cyclic ether product. Formation of both of these cyclic ether production channels proceeds via a resonance-stabilized hydroperoxy alkyl (QOOH) intermediate. Little or no ketohydroperoxide (KHP) is observed under the low-pressure conditions. At higher O 2 concentrations and higher pressures (1–2 atm), a strong KHP signal appears as the temperature is increased above 450 K. Definitive isomeric identification from measurements on the deuterated DEK isotopologues indicates the favored pathway produces a γ-KHP via resonance-stabilized alkyl, QOOH, and HOOPOOH radicals. Time-resolved measurements reveal the KHP formation becomes faster and signal more intense upon increasing temperature from 450 to 575 K before intensity drops significantly at 625 K. The KHP time profile also shows a peak followed by a gradual depletion for the extent of experiment. Several tertiary products exhibit a slow accumulation in coincidence with the observed KHP decay. These products can be associated with decomposition of KHP by β-scission pathways or via isomerization of a γ-KHP into a cyclic peroxide intermediate (Korcek mechanism). The oxidation of d 4 -DEK, where kinetic isotope effects disfavor γ-KHP formation, shows greatly reduced KHP formation and associated signatures from KHP decomposition products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗