Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Performance Rating Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Nuclear resonant scattering measurements on {sup 57}Fe by multichannel scaling with a 64-pixel silicon avalanche photodiode linear-array detector

We developed a silicon avalanche photodiode (Si-APD) linear-array detector for use in nuclear resonant scattering experiments using synchrotron X-rays. The Si-APD linear array consists of 64 pixels (pixel size: 100 × 200 μm{sup 2}) with a pixel pitch of 150 μm and depletion depth of 10 μm. An ultrafast frontend circuit allows the X-ray detector to obtain a high output rate of >10{sup 7} cps per pixel. High-performance integrated circuits achieve multichannel scaling over 1024 continuous time bins with a 1 ns resolution for each pixel without dead time. The multichannel scaling method enabled us to record a time spectrum of the 14.4 keV nuclear radiation at each pixel with a time resolution of 1.4 ns (FWHM). This method was successfully applied to nuclear forward scattering and nuclear small-angle scattering on {sup 57}Fe.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

Characterization of the 80-mm diameter Hamamatsu PMTs for the KM3NeT project

The optical module designed for the KM3NeT project consists of 31 photomultipliers of 3-inch diameter housed into a 17-inch diameter glass sphere. A proposed photomultiplier was the R12199-02 Hamamatsu 80-mm diameter. 203 of such PMTs have been delivered from Hamamatsu and tested by the KM3NeT groups of NIKHEF-Amsterdam, ECAP-Erlangen and INFN-Catania. Tests have been performed to measure the main parameters, such as gain, transit time spread, dark pulses rate, fraction of spurious pulses, quantum efficiency and effective photocathode size. The main results matched with the requirements of the project. Methods and results are presented in this report.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2015

The effect of intersystem crossings in N({sup 2}D) + H{sub 2} collisions

The transitions between quartet and doublet states of the NH{sub 2} molecule are studied for the first time, allowing the evaluation of the N({sup 4}S) + H{sub 2} reactive channel. High level ab initio calculations of the spin-orbit coupling are performed over the whole configurational space of the NH{sub 2} molecule and fitted to a proposed analytic form. Quasiclassical trajectories coupled with the surface hopping method are employed to calculate reaction cross section and rate constants. The reaction is largely affected by the initial rovibrational states of H{sub 2}, while the formation of long-lived complexes enhances the reaction probability.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2016

Ratcheted electrophoresis of Brownian particles

The realization of nanoscale machines requires efficient methods by which to rectify unbiased perturbations to perform useful functions in the presence of significant thermal noise. The performance of such Brownian motors often depends sensitively on their operating conditions—in particular, on the relative rates of diffusive and deterministic motions. In this letter, we present a type of Brownian motor that uses contact charge electrophoresis of a colloidal particle within a ratcheted channel to achieve directed transport or perform useful work against an applied load. We analyze the stochastic dynamics of this model ratchet to show that it functions under any operating condition—even in the limit of strong thermal noise and in contrast to existing ratchets. The theoretical results presented here suggest that ratcheted electrophoresis could provide a basis for electrochemically powered, nanoscale machines capable of transport and actuation of nanoscale components.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Thermal relaxation of molecular oxygen in collisions with nitrogen atoms

Investigation of O{sub 2}–N collisions is performed by means of the quasi-classical trajectory method on the two lowest ab initio potential energy surfaces at temperatures relevant to hypersonic flows. A complete set of bound–bound and bound–free transition rates is obtained for each precollisional rovibrational state. Special attention is paid to the vibrational and rotational relaxations of oxygen as a result of chemically non-reactive interaction with nitrogen atoms. The vibrational relaxation of oxygen partially occurs via the formation of an intermediate NO{sub 2} complex. The efficient energy randomization results in rapid vibrational relaxation at low temperatures, compared to other molecular systems with a purely repulsive potential. The vibrational relaxation time, computed by means of master equation studies, is nearly an order of magnitude lower than the relaxation time in N{sub 2}–O collisions. The rotational nonequilibrium starts to play a significant effect at translational temperatures above 8000 K. The present work provides convenient relations for the vibrational and rotational relaxation times as well as for the quasi-steady dissociation rate coefficient and thus fills a gap in data due to a lack of experimental measurements for this system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Accelerating FEM-Based Corrosion Predictions Using Machine Learning

Atmospheric corrosion of metallic parts is a widespread materials degradation phenomena that is challenging to predict given its dependence on many factors (e.g. environmental, physiochemical, and part geometry). For materials with long expected service lives, accurately predicting the degree to which corrosion will degrade part performance is especially difficult due to the stochastic nature of corrosion damage spread across years or decades of service. The Finite Element Method (FEM) is a computational technique capable of providing accurate estimates of corrosion rate by numerically solving complex differential Eqs. characterizing this phenomena. Nevertheless, given the iterative nature of FEM and the computational expense required to solve these complex equations, FEM is ill-equipped for an efficient exploration of the design space to identify factors that accelerate or deter corrosion, despite its accuracy. In this work, a machine learning based surrogate model capable of providing accurate predictions of corrosion with significant computational savings is introduced. Specifically, this work leverages AdaBoosted Decision trees to provide an accurate estimate of corrosion current per width given different values of temperature, water layer thickness, molarity of the solution, and the length of the cathode for a galvanic couple of aluminum and stainless steel.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Noble Gas Management: SBMOF 1 vs. NUCON Carbon

Pacific Northwest National Laboratory (PNNL), in collaboration with Flibe Energy, Inc., demonstrated the fabrication of metal organic frameworks (MOFs) into engineered beads to manage off-gases released from molten salt reactors. Among the many MOF options, SBMOF 1 was selected as an ideal sorbent to manage off-gases released from a molten salt reactor because its pore size is optimal. The SBMOF 1 was synthesized and fabricated into engineered particles using three different methods, with and without polymers. All the engineered particles were exposed to Co-60 radiation (1,000 kGy) to demonstrate their radiation stability. Single column breakthrough experiments were performed at different temperatures, activation conditions, flow rates, and off-gas compositions to optimize the Xe capacity at the breakthrough point and at saturation. The Xe loading in SBMOF 1 was compared with that of standard solid sorbent (Nucon carbon) under identical conditions. Based on the single column experiments, SBMOF 1 outperforms the Nucon carbon at all the temperatures and reduces the mass (to as little as 55%) of sorbent needed to achieve the same performance as carbon. The bed volume is also reduced, down to 48% of that of Nucon carbon, when the MOF is used. These results clearly demonstrate improvement in the amount of adsorbent needed and show a reduction in bed volume compared to traditional sorbent material.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1974

117.6 kilobit telemetry from Mercury - A major deep space telecommunication advance

On March 29, 1974, Mariner 10 transmitted 562 clear, sharp pictures of Mercury in real time at 117.6 kilobits per second. The methods by which large area coverage at roughly 1 km resolution was achieved are described. In particular, it is shown how link performance was effectively improved by carefully assessing picture quality and coverage versus bit rate and bit error rate. A number of improvements as compared to the 1971 Mars Orbiter, Mariner 9, are outlined.

Clarke, V. C., Jr.↗
NASA NTRS1982

Investigation of continuously traversing microphone system for mode measurement

The continuously Traversing Microphone System consists of a data acquisition and processing method for obtaining the modal coefficients of the discrete, coherent acoustic field in a fan inlet duct. The system would be used in fan rigs or full scale engine installations where present measurement methods, because of the excessive number of microphones and long test times required, are not feasible. The purpose of the investigation reported here was to develop a method for defining modal structure by means of a continuously traversing microphone system and to perform an evaluation of the method, based upon analytical studies and computer simulated tests. A variety of system parameters were examined, and the effects of deviations from ideal were explored. Effects of traverse speed, digitizing rate, run time, roundoff error, calibration errors, and random noise background level were determined. For constant fan operating speed, the sensitivity of the method to normal errors and deviations was determined to be acceptable. Good recovery of mode coefficients was attainable. Fluctuating fan speed conditions received special attention, and it was concluded that by employing suitable time delay procedures, satisfactory information on mode coefficients can be obtained under realistic conditions. A plan for further development involving fan rig tests was prepared.

Cicon, D. E.↗
NASA NTRS1988

Numerical Analysis Of Interlaminar-Fracture Toughness

Finite-element analysis applied in conjunction with strain-energy and micromechanical concepts. Computational procedure involves local, local-crack-closure, and/or the "unique" local-crack-closure method developed at NASA Lewis Research Center, for mathematical modeling of ENF and MMF. Methods based on three-dimensional finite-element analysis in conjunction with concept of strain-energy-release rate and with micromechanics of composite materials. Assists in interpretation of ENF and MMF fracture tests performed to obtain fracture-toughness parameters, by enabling evaluation of states of stress likely to induce interlaminar fractures.

Chamis, C. C.↗
NASA NTRS1993

Assessments of astronaut effectiveness

This study examined the reliability and convergent validity of three methods of peer and supervisory ratings of the effectiveness of individual NASA astronauts and their relationships with flight assignments. These two techniques were found to be reliable and relatively convergent. Seniority and a peer-rated Performance and Competence factor proved to be most closely associated with flight assignments, while supervisor ratings and a peer-rated Group Living and Personality factor were found to be unrelated. Results have implications for the selection and training of astronauts.

Rose, Robert M.↗
NASA NTRS2002

Cartesian-Grid Simulations of a Canard-Controlled Missile with a Free-Spinning Tail

The proposed paper presents a series of simulations of a geometrically complex, canard-controlled, supersonic missile with free-spinning tail fins. Time-dependent simulations were performed using an inviscid Cartesian-grid-based method with results compared to both experimental data and high-resolution Navier-Stokes computations. At fixed free stream conditions and canard deflections, the tail spin rate was iteratively determined such that the net rolling moment on the empennage is zero. This rate corresponds to the time-asymptotic rate of the free-to-spin fin system. After obtaining spin-averaged aerodynamic coefficients for the missile, the investigation seeks a fixed-tail approximation to the spin-averaged aerodynamic coefficients, and examines the validity of this approximation over a variety of freestream conditions.

Murman, Scott M.↗
DOE OSTI2017

Three-flavour neutrino oscillations with MINOS and CHIPS

MINOS was a long-baseline neutrino oscillation experiment comprising two functionally identical detectors that observed Fermilab's NuMI neutrino beam in its low energy tune, at distances of 1 km and 735 km. When NuMI switched to a higher-power medium energy tune in 2012, the MINOS detectors continued to operate as MINOS+. Since its commissioning in 2003, the MINOS Far Detector has also been able to detect atmospheric neutrinos. Atmospheric neutrino oscillations are sensitive to the mass splitting m2 32 and mixing angle 23, and are also subject to the Matter E ect as the neutrinos pass through the Earth, which a ects neutrinos and antineutrinos di erently in a way that depends upon the mass hierarchy. This thesis presents the rst atmospheric neutrino analysis using data from the MINOS+ era, and the rst dedicated MINOS atmospheric neutrino analysis to use a full three- avour mixing model. It includes 10.79 kiloton years of new data and encompasses almost an entire period of the 11-year solar cycle, from 2003 to 2014. The CHIPS experiment aims to reduce construction costs of large water Cherenkov detectors to $200-300k per kiloton by submerging detectors with a lightweight structure in bodies of water on the surface of the Earth. Such detectors could reach masses of 1 Mton and would assist with the search for CP violation in the neutrino sector by measuring the rate of e appearance in a beam. A detailed reconstruction framework for CHIPS has been developed, incorporating a novel method based on the timing of PMT hits. This framework has been used to study the performance of di erent designs for a 10 kiloton CHIPS R&D module, and to demonstrate that e events can be identi ed in a sparsely-instrumented detector with a 6% coverage of 3" PMTs.

Perch, Andrew John↗
DOE OSTI2018

Self-optimized construction of transition rate matrices from accelerated atomistic simulations with Bayesian uncertainty quantification

Here, a massively parallel method to build large transition rate matrices from temperature-accelerated molecular dynamics trajectories is presented. Bayesian Markov model analysis is used to estimate the expected residence time in the known state space, providing crucial uncertainty quantification for higher-scale simulation schemes such as kinetic Monte Carlo or cluster dynamics. The estimators are additionally used to optimize where exploration is performed and the degree of temperature acceleration on the fly, giving an autonomous, optimal procedure to explore the state space of complex systems. The method is tested against exactly solvable models and used to explore the dynamics of C15 interstitial defects in iron. Our uncertainty quantification scheme allows for accurate modeling of the evolution of these defects over timescales of several seconds.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Long-Term Outcomes Among Patients Who Achieve Complete or Near-Complete Responses After the Induction Phase of Bladder-Preserving Combined-Modality Therapy for Muscle-Invasive Bladder Cancer: A Pooled Analysis of NRG Oncology/RTOG 9906 and 0233

Purpose: To investigate the differences in outcomes among patients with muscle-invasive bladder cancer on NRG Oncology Radiation Therapy Oncology Group protocols 9906 and 0233 who achieved complete response and near-complete response after induction chemoradiation and then completed bladder-preserving therapy with chemoradiation therapy (chemo-RT) to full dose (60-64 Gy). Patients and Methods: A pooled analysis was performed on 119 eligible patients with muscle-invasive bladder cancer enrolled on NRG Oncology Radiation Therapy Oncology Group trials 9906 and 0233, who were classified as having a complete (T0) or near-complete (Ta or Tis) response after induction chemo-RT and completed consolidation with a total RT dose of at least 60 Gy. Bladder recurrence, salvage cystectomy rates, and disease-specific survival were estimated by the cumulative incidence method and bladder-intact and overall survivals by the Kaplan-Meier method. Results: Among the 119 eligible patients, 101 (85%) achieved T0, and 18 (15%) achieved Ta or Tis after induction chemo-RT and proceeded to consolidation. After a median follow-up of 5.9 years, 36 of 101 T0 patients (36%) versus 5 of 18 Ta or Tis patients (28%) experienced bladder recurrence (P=.52). Thirteen patients among complete responders eventually required late salvage cystectomy for tumor recurrence, compared with 1 patient among near-complete responders (P=.63). Disease-specific, bladder-intact, and overall survivals were not significantly different between T0 and Ta/Tis cases. Conclusions: The bladder recurrence and salvage cystectomy rates of the complete and the near-complete responders were similar. Therefore it is reasonable to recommend that patients with Ta or Tis after induction chemo-RT continue with bladder-sparing therapy with consolidation chemo-RT to full dose (60-64 Gy).

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

Wearable radio-frequency sensing of respiratory rate, respiratory volume, and heart rate

Abstract Many health diagnostic systems demand noninvasive sensing of respiratory rate, respiratory volume, and heart rate with high user comfort. Previous methods often require multiple sensors, including skin-touch electrodes, tension belts, or nearby off-the-body readers, and hence are uncomfortable or inconvenient. This paper presents an over-clothing wearable radio-frequency sensor study, conducted on 20 healthy participants (14 females) performing voluntary breathing exercises in various postures. Two prototype sensors were placed on the participants, one close to the heart and the other below the xiphoid process to couple to the motion from heart, lungs and diaphragm, by the near-field coherent sensing principle. We can achieve a satisfactory correlation of our sensor with the reference devices for the three vital signs: heart rate ( r = 0.95), respiratory rate ( r = 0.93) and respiratory volume ( r = 0.84). We also detected voluntary breath-hold periods with an accuracy of 96%. Further, the participants performed a breathing exercise by contracting abdomen inwards while holding breath, leading to paradoxical outward thorax motion under the isovolumetric condition, which was detected with an accuracy of 83%.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

Age and Method of Release Affect Migratory Performance of Hatchery Steelhead

Abstract Hatchery programs that are designed to aid recovery of natural populations of anadromous salmonids, including steelhead Oncorhynchus mykiss, require locally derived, natural-origin broodstock. In such programs, achieving smoltification size thresholds may require extending hatchery rearing beyond age 1. We compared out-migration survival and travel rates of 142,990 PIT-tagged steelhead smolts released at age 1 (S1 rearing strategy) or age 2 (S2 rearing strategy) over five release years at Winthrop National Fish Hatchery (WNFH, Okanogan County, Washington). An S2 rearing cycle produced larger smolts with more uniform size distributions, resulting in higher survival during the first portion of their out-migration than for S1 smolts in three of the five release years. The S2 smolts migrated more rapidly to the ocean than S1 smolts in all years except 2011 and arrived in the Columbia River estuary 5.4 d earlier on average than the S1 smolts. The S1 steelhead that did not leave during the volitional release were subsequently forced from the hatchery to measure their survival. Nonvolitional S1 migrants were smaller and had survival rates that were 2.3–66.3 times lower than those of S1 steelhead that left WNFH on their own. The same was true for S2 steelhead, but the magnitude of the survival difference between volitional migrants and fish forced from the raceways was less variable and ranged from 2.5- to 4.6-fold. We conclude that S2 rearing can be a successful strategy for producing smolts from local natural-origin broodstock, with out-migration survival and travel times that are equivalent to or better than those of S1 smolts produced from nonlocal broodstock. Received July 25, 2016; accepted March 31, 2017 Published online May 31, 2017

Tatara, Christopher P.↗
DOE OSTI2015

Beam’s-eye-view imaging during non-coplanar lung SBRT

Purpose: Beam’s-eye-view (BEV) imaging with an electronic portal imaging device (EPID) can be performed during lung stereotactic body radiation therapy (SBRT) to monitor the tumor location in real-time. Image quality for each patient and treatment field depends on several factors including the patient anatomy and the gantry and couch angles. The authors investigated the angular dependence of automatic tumor localization during non-coplanar lung SBRT delivery. Methods: All images were acquired at a frame rate of 12 Hz with an amorphous silicon EPID. A previously validated markerless lung tumor localization algorithm was employed with manual localization as the reference. From ten SBRT patients, 12 987 image frames of 123 image sequences acquired at 48 different gantry–couch rotations were analyzed. δ was defined by the position difference of the automatic and manual localization. Results: Regardless of the couch angle, the best tracking performance was found in image sequences with a gantry angle within 20° of 250° (δ = 1.40 mm). Image sequences acquired with gantry angles of 150°, 210°, and 350° also led to good tracking performances with δ = 1.77–2.00 mm. Overall, the couch angle was not correlated with the tracking results. Among all the gantry–couch combinations, image sequences acquired at (θ = 30°, ϕ = 330°), (θ = 210°, ϕ = 10°), and (θ = 250°, ϕ = 30°) led to the best tracking results with δ = 1.19–1.82 mm. The worst performing combinations were (θ = 90° and 230°, ϕ = 10°) and (θ = 270°, ϕ = 30°) with δ > 3.5 mm. However, 35% (17/48) of the gantry–couch rotations demonstrated substantial variability in tracking performances between patients. For example, the field angle (θ = 70°, ϕ = 10°) was acquired for five patients. While the tracking errors were ≤1.98 mm for three patients, poor performance was found for the other two patients with δ ≥ 2.18 mm, leading to average tracking error of 2.70 mm. Only one image sequence was acquired for all other gantry–couch rotations (δ = 1.18–10.29 mm). Conclusions: Non-coplanar beams with gantry–couch rotation of (θ = 30°, ϕ = 330°), (θ = 210°, ϕ = 10°), and (θ = 250°, ϕ = 30°) have the highest accuracy for BEV lung tumor localization. Additionally, gantry angles of 150°, 210°, 250°, and 350° also offer good tracking performance. The beam geometries (θ = 90° and 230°, ϕ = 10°) and (θ = 270°, ϕ = 30°) are associated with substantial automatic localization errors. Overall, lung tumor visibility and tracking performance were patient dependent for a substantial number of the gantry–couch angle combinations studied.

60 APPLIED LIFE SCIENCES↗