Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLATES - BENDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Error analysis of finite element solutions for postbuckled plates

An error analysis of results from finite-element solutions of problems in shell structures is further developed, incorporating the results of an additional numerical analysis by which oscillatory behavior is eliminated. The theory is extended to plates with initial geometric imperfections, and this novel analysis is programmed as a postprocessor for a general-purpose finite-element code. Numerical results are given for the case of a stiffened panel in compression and a plate loaded in shear by a 'picture-frame' test fixture.

Sistla, Rajaram↗
NASA NTRS1988

Hierarchic plate and shell models based on p-extension

This paper is concerned with formulations of finite element models for beams, arches, plates and shells based on the principle of virtual work. The focus is on computer implementation of hierarchic sequences of finite element models suitable for numerical solution of a large variety of practical problems which may concurrently contain thin and thick plates and shells, stiffeners, and regions where three dimensional representation is required. The approximate solutions corresponding to the hierarchic sequence of models converge to the exact solution of the fully three dimensional model. The stopping criterion is based on (1) estimation of the relative error in energy norm; (2) equilibrium tests; and (3) observation of the convergence of quantities of interest.

Szabo, Barna A.↗
NASA NTRS1988

Passive control plate for shock-boundary layer interactions

Computational and experimental results are presented for a passive method capable of reducing or completely eliminating the separation region in shock-boundary layer interactions of the type that can result in severe performance degradation due to flow separation in supersonic and hypersonic inlets. The method involves the placement of an embedded plate in the outer portion of the boundary layer, parallel to the wall, so that the incident shock will impinge upon, and be reflected from, its surface. This will lower the pressure gradient in the low-momentum, near-wall region. A porous control plate's effect has also been investigated.

Goodman, Wesley L.↗
NASA NTRS1989

Reflection-Zone-Plate Antenna

Microwave antenna, based on reflection holography, designed and tested. Modified to produce arbitrary beam patterns by controlling relief pattern. Antenna planar or contoured to supporting structure. Low off-axis radar cross section at frequencies removed from operational frequency. Interference pattern produced by spherical wave intersecting plane wave consists of concentric circles similar to Newton's rings. Pattern identical to Fresnel zone plate, which has lens properties. Plane wave incident on hologram, or zone plate, focused to point.

Franke, John M.↗
NASA NTRS1988

Rarefied flow past a flat plate at incidence

Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for the transitional flow about a flat plate at 40 deg incidence. The plate has zero thickness and a length of 1.0 m. The flow conditions simulated are those experienced by the Shuttle Orbiter during reentry at 7.5 km/s. The range of freestream conditions are such that the freestream Knudsen number values are between 0.02 and 8.4, i.e., conditions that encompass most of the transitional flow regime. The DSMC simulations show that transitional effects are evident when compared with free molecule results for all cases considered. The calculated results demonstrate clearly the necessity of having a means of identifying the effects of transitional flow when making aerodynamic flight measurements as are currently being made with the Space Shuttle Orbiter vehicles. Previous flight data analyses have relied exclusively on adjustments in the gas-surface interaction models without accounting for the transitional effect which can be comparable in magnitude. The present calculations show that the transitional effect at 175 km would increase the Space Shuttle Orbiter lift-drag ratio by 90 percent over the free molecule value.

Dogra, Virendra K.↗
NASA NTRS1988

Hierarchic plate and shell models based on p-extension

Formulations of finite element models for beams, arches, plates and shells based on the principle of virtual work was studied. The focus is on computer implementation of hierarchic sequences of finite element models suitable for numerical solution of a large variety of practical problems which may concurrently contain thin and thick plates and shells, stiffeners, and regions where three dimensional representation is required. The approximate solutions corresponding to the hierarchic sequence of models converge to the exact solution of the fully three dimensional model. The stopping criterion is based on: (1) estimation of the relative error in energy norm; (2) equilibrium tests, and (3) observation of the convergence of quantities of interest.

Szabo, Barna A.↗
NASA NTRS1989

Response of composite plates subjected to acoustic loading

The objectives of the project were to investigate numerical methodology for the determination of narrowband response in the geometrically nonlinear regime, to determine response characteristics for geometrically nonlinear plates subjected to random loading and to compare the predictions with experiments to be performed at NASA-Langley. The first two objectives were met. The response of composite plates subjected to both narrowband and broadband excitation were studied and the results are presented and discussed.

Moyer, E. Thomas, Jr.↗
NASA NTRS1988

The effects of excitation waveforms and shaker moving mass on the measured modal characteristics of a 2- by 5-foot aluminum plate

Ground vibration tests were conducted to compare and to investigate the effects of five excitation waveforms and the shaker moving mass (equipment and armature used to attach the shaker to the structure) on the experimental modal characteristics of a 2- by 5-ft aluminum plate using fast Fourier transform techniques. The five types of excitation waveforms studied were sine dwell, random, impact, sine sweep, and impulsive sine. The results showed that the experimental modal frequencies for all types of excitation were within 3 percent, while the modal damping data exhibited greater scatter. The sets of mode shapes obtained by the five types of excitation were consistent. The results of the shaker moving mass investigation on the 2- by 5-ft aluminum plate showed that modal frequency decreases and modal damping remains relatively constant with an increase in shaker moving mass. The generalized mass of the structure appears to decrease with an increase in shaker moving mass. In addition, it was seen that having a shaker near a node line can reduce some of the effects of the added shaker moving mass on the frequencies and the damping.

Voracek, David F.↗
NASA NTRS1989

Halogen occultation experiment (HALOE) optical witness-plate program

An optical witness plate program was implemented to monitor buildup of molecular contamination in the clean room during the assembly and testing of the Halogen Occulation Experiment (HALOE) instrument. Travel plates to monitor molecular contamination when the instrument is not in the clean room are also measured. The instrument technique is high-resolution transmission spectroscopy in the 3 micron spectral region using a Fourier transform spectrometer. Witness specimens of low index of refraction, infrared transmitting material are used for contaminant monitoring and for spectral signature analysis. Spectral signatures of possible molecular contamination are presented. No condensible volatile material contamination of HALOE optical witness specimens have yet been found.

Harvey, Gale A.↗
NASA NTRS1989

A study of composite plates with holes/inclusions

Delamination characterization of a plate with a hole/inclusion is presented. A closed form solution is developed to obtain stresses on the boundary of hole/inclusion in the plate. Once the location with the highest tangential stress is identified, a Finite Element Method analysis of a laminate under tensile loading is considered. The models are presented for the closed form and Finite Element Method. The examples are for (+ or - 35/0/90)s laminate of AS4/3501-6. Tensile, biaxial, and shear loads are considered.

Bense, Ronald↗
NASA NTRS1989

Plate motions and deformations from geologic and geodetic data

The very long baseline interferometry (VLBI) measurements made in the western U.S. since 1979 provide discrete samples of the temporal and spatial deformation field. The interpretation of the VLBI derived rates of deformation requires an examination of geologic information and more densely sampled ground based geodetic data. Triangulation and trilateration data measured on two regional networks, one in the central Mojave Desert and one in the Coast Ranges east of the San Andreas fault, were processed. At the spatial scales spanned by these local geodetic networks, auxiliary geologic and geophysical data were utilized to examine the relation between measured incremental strain and the accommodation of strain seen in local geologic structures, strain release in earthquakes, and principal stress directions inferred from in situ measurements. VLBI data was also processed from stations distributed across the Pacific-North America plate boundary zone in the western U.S. The VLBI data were used to constrain the integrated rate of deformation across portions of the continental plate boundary in California and to provide a tectonic framework to interpret regional geodetic and geologic studies.

Jordan, Thomas H.↗
NASA NTRS1989

Asymptotic behavior of a flat plate wake

An experimental study has been conducted to investigate the far-field, self-similar properties of a flat plate wake. A plane turbulent wake was generated at the trailing edge of a smooth splitter plate separating two legs of a Mixing Layer Wind Tunnel, with both initial boundary layers tripped. For the present study, both legs were operated at a free-steam velocity in the test section of 15 m/s, giving a Reynolds number based on wake momentum thickness of about 1750. Single profile measurements were obtained at five streamwise locations using a Pitot probe for the mean velocity measurements and a single cross-wire probe for the turbulence data, which included statistics up to third order. The mean flow data indicated a self-similar behavior beyond a streamwise distance equivalent to about 350 wake momentum thicknesses. However, the turbulence data show better collapse beyond a distance equivalent to about 500 momentum thicknesses, with all the measured peak Reynolds stresses achieving constant, asymptotic levels. The asymptotic mean flow behavior and peak primary stress levels agree well with theoretical predictions based on a constant eddy viscosity model. The present data also agree reasonably well with previous measurements, of which only one set extends into the self-similar region. Detailed comparisons with previous data are presented and discussed in this report.

Weygandt, James H.↗
NASA NTRS1988

A geometrically nonlinear theory of shear deformable laminated composite plates and its use in the postbuckling analysis

This paper is devoted to the formulation of a higher-order, geometrically nonlinear theory of anisotropic symmetrically-laminated composite plates and to the analysis, in this context, of their postbuckling behavior. Special attention is given to the postbuckling analysis of plates made of transversely isotropic layers for which case, the influence played by the degree of transversal-isotropy of the layers as well as by the goemetrical parameters of the panel is investigated. Finally, the results obtained within the present higher-order theory are compared with their first order transverse shear deformation as well as with their classical (Kirchhoff) counterparts and a number of conclusions concerning their range of applicability and the influence of various parameters are presented.

Librescu, L.↗
NASA NTRS1988

A new diagnostic method for separating airborne and structureborne noise radiated by plates with applications for propeller driven aircraft

The anticipated application of advanced turboprop propulsion systems is expected to increase the interior noise of future aircraft to unacceptably high levels. The absence of technically and economically feasible noise source-path diagnostic tools has been a prime obstacle in the development of efficient noise control treatments for propeller-driven aircraft. A new diagnostic method that permits the separation and prediction of the fully coherent airborne and structureborne components of the sound radiated by plates or thin shells has been developed. Analytical and experimental studies of the proposed method were performed on an aluminum plate. The results of the study indicate that the proposed method could be used in flight, and has fewer encumbrances than the other diagnostic tools currently available.

Mcgary, Michael C.↗
NASA NTRS1988

Continental tectonics in the aftermath of plate tectonics

It is shown that the basic tenet of plate tectonics, rigid-body movements of large plates of lithosphere, fails to apply to continental interiors. There, buoyant continental crust can detach from the underlying mantle to form mountain ranges and broad zones of diffuse tectonic activity. The role of crustal blocks and of the detachment of crustal fragments in this process is discussed. Future areas of investigation are addressed.

Molnar, Peter↗
NASA NTRS1988

Boundary element method for 3-D cracks in a plate

Fundamental solutions which automatically satisfy boundary conditions at the interfaces of an elastic plate perfectly bonded to two elastic halfspaces are implemented in a three-dimensional BEM for crack problems. The BEM features a new integration scheme for highly singular kernels. The capability is achieved through a part analytic and part numerical integration procedure, such that the analytic part of the integration is similar for all slip/opening variations. Part-through elliptic cracks in an elastic plate with traction-free surfaces are analyzed and the SIF values along the crack front are found to compare favorably with the numerical SIF results of Raju and Newman (1979).

Fares, N.↗
NASA NTRS1989

On the large-scale structure of the turbulent wake of a flat plate

A simple heat-tagging technique was used to isolate and analyze the large-scale coherent structures present in the two-dimensional wake of a flat plate. The results indicate the presence of these coherent structures even at 250 momentum thicknesses downstream of the trailing edge. These structures have a vortexlike topology and carry a significant amount of the total shear stress. The present results for the flat-plate wake seem to be in general agreement with those that have been obtained in cylinder wakes by other comtemporary investigators using more complex techniques of eduction and signal enhancement.

Jovic, S.↗
NASA NTRS1989

Failure analysis of blistered gold plating on spot welded electrical relays

Gold-plated stainless-steel sideplates, part of a JPL Galileo spacecraft electronic-relay assembly, exhibited blistering after resistance spot welding. Unacceptable relays had heavy nonuniform gold electrodeposited layers with thicknesses 4.5-11.5 microns. SEM and metallographic investigations indicated much higher heat input generated during the resistance spot welding in unacceptable relays. The attributes of acceptable welded relays are contrasted with unacceptable relays; the possible mechanism of laminar formation of polymeric material in the gold plating is discussed; and some recommendations are provided to prevent similar problems.

Sokolowski, Witold↗