Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLANTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

LONG TERM OPERATION ISSUES FOR ELECTRICAL CABLE SYSTEMS IN NUCLEAR POWER PLANTS

Nuclear power plants contain hundreds of kilometers of electrical cables including cables used for power, for instrumentation, and for control. It is essential that safety-related cable systems continue to perform following a design-basis event. Wholesale replacement of electrical cables in existing plants facing licensing period renewal is both impractical and cost-prohibitive. It is therefore important to understand the long term aging of cable materials to have confidence that aged cables will perform when needed. It is equally important in support of cable aging management to develop methods to evaluate the health of installed cables and inform selective cable replacement decisions. The most common insulation materials for electrical cables in nuclear power plants are cross-linked polyethylene and ethylene-propylene rubber. The mechanical properties of these materials degrade over time in the presence of environmental stresses including heat, gamma irradiation, and moisture. Mechanical degradation of cable insulation beyond a certain threshold is unacceptable because it can lead to insulation cracking, exposure of energized conductors, arcing and burning or loss of the ability of the cable system to function during a design-basis accident. While thermal-, radiation-, and moisture-related degradation of polymer insulation materials has been extensively studied over the last few decades, questions remain regarding the long-term performance of cable materials in nuclear plant-specific environments. Identified knowledge gaps include an understanding of the temperature-dependence of activation energies for thermal damage and an understanding of the synergistic effects of radiation and thermal stress on polymer degradation. Many of the outstanding questions in the aging behavior of cable materials relate to the necessity of predicting long-term field degradation using accelerated aging results from the laboratory. Materials degrade faster under more extreme conditions, but extension of behavior to long term degradation under more mild conditions, such as those experienced by most installed cables in nuclear power plants, is complicated by the fact that different degradation mechanisms may be involved in extreme and mild scenarios. The discrepancy in predicted results from short term, more extreme exposure and actual results from longer term, more mild exposures can be counter intuitive. For instance, due to the attenuation of oxidation penetration in material samples rapidly aged through exposure to high temperatures, the bulk of the samples may be artificially protected from thermal aging. In another example, simultaneous exposure of cable insulation material to heat and radiation may actually lead to less damage at higher temperatures than may be observed at lower temperatures. The Light Water Reactor Sustainability program of the United States (US) Department of Energy Office (DOE) of Nuclear Energy is funding research to increase the predictive understanding of electrical cable material aging and degradation in existing nuclear power plants in support of continued safe operation of plants beyond their initial license periods. This research includes the evaluation and development of methods to assess installed cable condition.

Fifield, Dr Leonard S↗

Methods for elevating fat/oil content in plants

In some embodiments, the present invention provides a method of elevating lipid content in vegetative (non-seed) plant or algae cells, plant tissues, or whole plants by genetically modifying the plant or algae to express a lipid droplet-associated protein or polypeptide (such as fat-specific protein 27) of mammalian origin. Also provided are genetically-modified plant or algae cells, plant tissues, or whole plants with elevated cellular lipid content, expressing a lipid droplet-associated protein or polypeptide (such as fat-specific protein 27) of mammalian (e.g. human) origin.

59 BASIC BIOLOGICAL SCIENCES↗

Compositions and methods for engineering oil content in plants

Compositions and methods for producing plants with enhanced oil content and higher seed yield are disclosed. The transgenic plant comprises a polynucleotide encoding a monoacylglycerol O-acyltransferase 1 (MGAT1) operatively linked to a plant-expressible promoter; a polynucleotide encoding a phosphatidylcholine diacylglycerol cholinephosphotransferase 1 (PDCT1) operatively linked to a plant-expressible promoter; a polynucleotide encoding a suppressor of expression of Sugar Dependent 1 (SPD1) operatively linked to a plant-expressible promoter; a polynucleotide encoding a diacylglyerol acyltransferase (DGAT1) operatively linked to a plant-expressible promoter and a polynucleotide encoding a glycerol-3-phosphate dehydrogenase (GPD1) operatively linked to a plant-expressible promoter; or a combination thereof.

Dhankher, Om Parkash↗

Methods of engineered tissue succulence in plants

Disclosed herein are methods of altering tissue succulence in plants. In some examples, a disclosed method includes overexpressing a modified helix-loop-helix transcription factor CEB1 in a plant cell, thereby altering plant succulence. The disclosed methods can be used to improve the drought and salinity tolerance of plants, such as in plants in arid or saline environments, and also enhance the ability of plants to perform. Also disclosed are CEB1 nucleic acids and transgenic plants containing such nucleic acids.

Cushman, John C.↗

Transcription factors to improve resistance to environmental stress in plants

Plants, plant cells, and seeds are described herein that grow well and are resistant to environmental stresses such as drought and insects, where the plants have one or more mutations that reduce or eliminate the interaction of MYC transcription factors with the JAZ proteins. The plants can have an additional mutation that reduces or eliminates the function of the PHYB gene, and/or a heterologous PIF4 transgene or PIF4 expression cassette to improve the growth of the myc mutant plants. Methods of making and using such plants, plant cells, and seeds are also described.

Howe, Gregg A.↗

Application of Plants as Bio-markers to Assess Wetland Ecosystem Health

Exposure of non-human biota to radionuclides or other contaminants depends upon a number of factors, which relate to the distribution of a given contaminant in the environment relative to the utilization of the environment by resident biota. Potential effects to biota following contaminant exposure must then be assessed based on the development of defensible linkages between the probability of exposure and the probability of corresponding effects. In many cases, contaminants, such as radionuclides, can show highly localized distributions in natural systems, covering relatively small spatial extents. Despite this, however, in the case of sedentary organisms, such as plants, it is possible for individuals to live in areas with relatively high contaminant levels throughout their lives. Plants represent integral components of ecosystems due to their capacity to use solar energy to convert CO{sub 2} into digestible organic molecules, due to their position at the base of terrestrial and aquatic food chains, and due to their importance as habitat and refuges for terrestrial and aquatic biota. As a result, the integrity of ecosystems is dependent upon plant health. The objective of this study was to determine whether significant changes in parameters reflecting plant photosynthetic capacity occurred with significant differences in {sup 14}C exposure in a wetland ecosystem. The study was conducted in Duke Swamp, a wetland ecosystem that receives {sup 14}C through groundwater influx. Sampling was conducted at 4 locations with varying {sup 14}C concentrations. These locations were selected based on a detailed survey of the swamp that was conducted in 2001 to evaluate the spatial distribution of {sup 14}C in surface vegetation, relative to concentrations reported in Sphagnum moss and soil in the swamp in the early 1990's. Locations were also selected to assess the impacts of both {sup 14}C exposure and the degree of incident solar radiation on plant photosynthetic parameters. A screening analysis of resident plant species in Duke Swamp was conducted and alder was ultimately selected as the test species due to its propensity to accumulate {sup 14}C in leaf tissues and its ubiquitous distribution throughout Duke Swamp, as well as in wetlands, in general. Carbon-14 concentrations in alder leaves and the net photosynthetic rate in leaf tissues were then measured at each study site throughout the summer of 2004. In general, {sup 14}C concentrations in Duke Swamp surface vegetation have declined between 1991 and the present by approximately 2- to 3-fold in the area of the swamp with the highest {sup 14}C concentrations, with a corresponding 34% reduction in the spatial extent of these areas. Carbon-14 specific activities in alder leaf tissues collected in the 2004 study ranged from 0.280 Bq/g C at Site 24 to 14.3 Bq/g C at Site 35, with intermediate values of 1.21 and 2.60 Bq/g C detectable in leaves collected at Sites 9 and 56, respectively. Comparison of {sup 14}C levels in alder leaves with the net rate of photosynthesis showed that no significant relationships existed between {sup 14}C exposure and the photosynthetic capacity of alders, despite the 4.1- to 51-fold differences in alder {sup 14}C specific activities between sampling locations. In fact, one-way analysis of variance (ANOVA) indicated that the net rate of photosynthesis in alder leaves was significantly higher at Site 35 (the site with the highest {sup 14}C concentrations) than at either Site 24 (the site with the lowest {sup 14}C concentrations) or Site 9 (the site with the second lowest {sup 14}C concentrations). By comparison, alder leaves collected at Site 56 showed no significant difference in net photosynthesis in comparison to values measured in leaves collected at Site 35. Based on these data, it is likely that light availability was a dominant factor influencing the photosynthetic capacities of alders in Duke Swamp, since both Site 56 and Site 35 were located in shaded areas, whereas Sites 9 and 24 were situated in open areas with relatively high light penetration. This was further supported by literature data, which indicated that the rates of photosynthesis measured in alder leaves collected in Duke Swamp fell within the same range as those measured for other temperate, deciduous tree species that presumably were not being exposed to elevated {sup 14}C concentrations. It is important to note that although it was possible to compare net photosynthetic rates at shaded locations showing high versus low {sup 14}C concentrations, it was not possible to assess the plant photosynthetic capacity at sunny versus shaded locations in areas with high {sup 14}C levels due to the small, localized nature of the {sup 14}C plume in the swamp, which represented only approximately 0.00015 km{sup 2} and fell entirely in a shaded area.

54 ENVIRONMENTAL SCIENCES↗

Effect of Bioaccumulation of Cs and Sr Natural Isotopes on Foliar Structure and Plant Spectral Reflectance of Indian Mustard (Brassica juncea)

The objectives of this study are: 1.) evaluate the capacity of Indian mustard (Brassica juncea) for uptake and accumulation of Cs and Sr natural isotopes; 2.) identify foliar structural and other physiological changes (biomass, relative water content, etc.) resulting from the accumulation of these two elements; and 3.) monitor Cs and Sr uptake and bioaccumulation process by spectral reflectance. Potted Indian mustard plants were exposed to different concentrations of Cs (50 and 600 ppm) and Sr (50 and 300 ppm) natural isotopes in solution form for 23 days. Bioaccumulation of Cs and Sr was found in the order of leaves > stems > roots for both Cs- and Sr-treated plants. The highest leaf Sr accumulation is observed to be 2708 mg kg{sup -1}, and the highest leaf Cs accumulation is 12251 mg kg{sup -1}. High translocation efficiency for both elements is documented by shoot/root concentration ratios greater than one. Relative water content (RWC) of the plants showed a significant (p < 0.05) decrease in Cs-treated plants. Cs accumulation also affected the pigment concentration and internal structure of the leaf and the spectral characteristics of plants. Within the applied concentration range, Sr accumulation resulted in no significant changes in RWC, structural and spectral characteristics of mustard plants. Cs shoot concentration showed significant negative correlation with relative water content RWC (r = -0.88) and Normalized Difference Vegetation Index (NDVI) (r = -0.68) of plant shoots. The canopy spectral reflectance and NDVI analysis clearly revealed (p < 0.05) the stress caused by Cs accumulation. (authors)

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Root-Uptake of C-14 Acetic Acid by Various Plants and C-14 Dynamics Surrounding the Experimental Tessera

Carbon-14 (C-14, t{sub 1/2} = 5.73x10{sup 3} yrs) from radioactive waste is one of the most important radioactive nuclides for environmental assessment in the context of geological disposal, and understanding the transfer of radioactive elements to plants is essential for public health safety. In order to obtain fundamental knowledge, culture experiments using marigold (Tagetes patula L.), tall fescue (Festuca arundinacea S.), paddy rice (Oryza sativa L.), radish (Raphanus sativus L.), and carrot (Daucus carota L.) plants were conducted to examine root-uptake and dynamics of C-14 in the laboratory. The C-14 radioactivity in each plant part (e.g. shoot, root, edible part, etc.), medium (e.g. culture solution, sand, etc.), and air was determined. The distribution of C-14 in the plants was visualized using autoradiography. For a comparison, autoradiography was also done using Na-22. Results of the present study indicated that C-14 labeled CO{sub 2} gas was released from the culture solution to the atmosphere. Clear autoradiography images were observed in plants for the shoots and lower roots which were soaked in the culture solution. The upper roots which were not soaked in the culture solution were not clearly imaged. In the radiotracer experiment using Na-22, a clear image was observed for the whole carrot seedling, even including the upper root, on the autoradiography. However, the amounts of C-14 acetic acid absorbed by all the plants through their roots were considered to be very small. Inorganic carbon transformed from C-14 acetic acid would be taken up by plants through the roots, and some fraction of C-14 would be assimilated into the shoots by photosynthesis. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Preconceptual Designs of Coupled Power Delivery between a 4-Loop PWR and 100-500 MWe HTSE Plants

This study develops a preconceptual design for the integration between a large-scale high-temperature electrolysis facility and a NPP. Two hydrogen facility sizes are considered: 100 MWnom and 500 MWnom. Both steam supply designs use cold reheat steam extraction as a heat source. A reboiler inside the protected area of the power plant transfers steam heat to the demineralized water supply for the hydrogen plant. After the heat transfer, the extracted steam condenses and returns to the condenser while the process steam routes out of the protected area to the electrolyzers. Electrical power is tapped off from the high voltage side of the GSU transformer, where it is then transported via a 345-kV transmission line to the hydrogen facility. Circuit breakers and disconnects are located at both ends of the transmission line. Step down transformers and miscellaneous switchgear/buses are located at the end of the transmission line inside the HTEF boundary. Control capabilities for the steam interfacing equipment and electrical dispatch are accessible from the Main Control Room, and protective relays for the transmission line are located inside the Relay Room. Computer modeling was performed for the thermal and electrical designs. PEPSE analysis provided the steady-state parameters for thermal extraction from the turbine cycle. These parameters were used to inform transients and size equipment in combination with Applied Flow Technology (AFT) Arrow and AFT Fathom modeling for steam and water piping, respectively. Electrical transients were analyzed using PSCAD. An ETAP model was used to evaluate power flow and short circuit, which enabled the sizing of transformers and protective equipment. A cost estimate was developed for both integration designs when considering plant separation distances of 250 m and 500 m. From these estimates, the modifications for thermal and electrical interfacing of a first-of-a-kind nuclear-integrated hydrogen facility are anticipated to cost between $60–250/kWnom., where the subscript “nom” refers to the nominal size of the hydrogen plant. On a thermal power basis, the thermal power has a cost of approximately $8/MWth for a 500 MWnom high temperature electrolysis plant located 500 m distant from the NPP. That value decreases to approximately $7.5/MWth for a 250 m separation distance between the hydrogen plant and the NPP. This value is lower than previous estimates of the cost of heat extracted from NPPs primarily because in this work the steam is extracted from cold reheat instead of the main steam line, which reduces the cost of the dispatched steam by approximately $3.5/MWth. Nuclear steam extraction can provide a profit avenue for many plants and is not restricted to hydrogen production. Ammonia production, oil refining, and paper production, among other industrial processes all require thermal energy, which can be provided by NPPs. Future work should look further at the details of thermal extraction for a variety of use cases. This can include increased levels of extraction and multiple simultaneous users. Additionally, site-specific studies should be performed to develop industry experience and improve cost accuracy.

08 HYDROGEN↗

Used Fuel Dry Storage Systems and Components for Shutdown Plants to Expedite Defueling of Spent Fuel Pool - 18378

For plants that have announced plans to shut down, their main priority is to off-load the Used Nuclear Fuel from the spent fuel pool to dry storage at an ISFSI so that they can proceed to 'Safe store' or other storage options, and start their decommissioning process as soon as possible. One of the major expenses for a decommissioned plant is the cost of maintenance of the spent fuel pool. Therefore, the ability of the dry storage system to store short cooled fuel is an important aspect of dry storage system for shutdown plants. When a shutdown plant evaluates the dry storage options, total cost of the transferring the fuel from the pool to ISFSI site needs to be evaluated. One of the major costs to the utility for dry storage is the cost of ISFSI pad (basemat) along with the cost of dry storage system hardware. Smaller ISFSI footprint saves utility for the cost of ISFSI site excavation, cost of engineered backfill and cost of ISFSI pad. In order to minimize the cost of dry storage systems, besides the size of the ISFSI pad as described above, other important considerations is to use high capacity systems. The highest capacity systems available in the dry storage market today are with 37 PWR or 89 BWR used fuel assemblies per canister. These dry storage systems are expected to be at the plant sites for extended duration due to the unavailability of Interim Storage Facilities or a permanent disposal sites like Yucca Mountain. Maintaining the integrity of the dry storage systems canisters and storage overpack so that they can safely protect the fuel and integrity of used nuclear fuel is maintained during storage period is of utmost importance. Robust Aging Management Program is an important aspect for dry storage systems not only at the shutdown plants but also at the operating plants. This paper will provide the update of a reduced footprint version of TN Americas NUHOMS{sup R} System with MATRIX HSM and NUHOMS{sup R} EOS Canisters that addresses the need for maximizing safety, ISFSI capacity while optimizing cost. It will provide an update on the current capabilities, design features and current status of the licensing and deployment of NUHOMS{sup R} EOS System. It will provide the current status of the MATRIX HSM along with the significant enhancement included for a robust Canister Evolved Safety Program for Aging Management. It will also describe the construction sequence; loading operations, and inspections during extended storage as a part of aging management program. The compact version of TN Americas NUHOMS{sup R} System with MATRIX HSM offers a 'Universal' Storage Overpack which is designed to accept all different designs dry storage canisters available in the industry. As UNF storage continues to drives the industry towards innovations that address the need for optimized dry storage systems, compact ISFSIs and prudent aging management programs, this new evolution of the TN Americas NUHOMS{sup R} system with MATRIX HSM and EOS Canisters offers a significant leap forward in addressing all of these challenges. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Data Analytics Methods to Measure Plant Outage Resilience

Every 18 or 24 months nuclear power plants (depending on plant configuration, pressurized or boiling water reactor respectively) undergo a period of outage where the plant is taken offline and a large number of maintenance and surveillance activities (that cannot be performed while plant is running) are performed in typically 2–3 weeks. Planning of a plant outage is very challenging since all the activities are required to be performed in the shortest amount of time given available resources (typically contractor crews hired for the duration of the outage). Consequently, plant outages can be costly due the actual loss of power generation and crew costs and, because of it, there is a need to maximize resource usage in the outage planning phase and reduce the risk of outage delays. This paper is addressing these needs by providing a set of analytical methods designed to analyze plant outage schedule and identify critical elements based on available resources (time and crews). These methods are based on natural language processing and optimization algorithms. In this respect, two classes of methods have been developed: one that focuses on the time resource and how variability in the time to complete outage tasks may impact outage delays, and one that minimizes the risk of outage delays by integrating available resources to assess when daily activities should be performed.

97 - MATHEMATICS AND COMPUTING↗

Approaches to Plant Hydrogen and Oxygen Isoscapes Generation

Plant hydrogen and oxygen isoscapes have been utilized to address important and somewhat disparate research goals. The isotopic composition of leaf water affects the isotopic composition of atmospheric CO2 and O2 and is a logical starting point for understanding the isotopic composition of plant organic compounds since photosynthesis occurs in the leaf water environment. Leaf water isoscapes have been produced largely as part of efforts to understand atmospheric gas isotopic composition. The isotopic composition of plant organic matter has also been targeted for its potential to serve as a proxy for past environmental conditions. Spatially distributed sampling and modeling of modern plant H & O isoscapes can improve our understanding of the controls of the isotope ratios of compounds such as cellulose or n-alkanes from plants and therefore their utility for paleoreconstructions. Spatially varying plant hydrogen and oxygen isotopes have promise for yielding geographic origin information for a variety of plant products, including objects of criminal forensic interest or food products. The future has rich opportunities for the continued development of mechanistic models, methodologies for the generation of hydrogen and oxygen isoscapes, and cross-disciplinary interactions as these tools for understanding are developed, shared, and utilized to answer large-scale questions.

08 HYDROGEN↗

A new theory of plant–microbe nutrient competition resolves inconsistencies between observations and model predictions

Terrestrial plants assimilate anthropogenic CO 2 through photosynthesis and synthesizing new tissues. However, sustaining these processes requires plants to compete with microbes for soil nutrients, which therefore calls for an appropriate understanding and modeling of nutrient competition mechanisms in Earth System Models (ESMs). In this paper, we survey existing plant–microbe competition theories and their implementations in ESMs. We found no consensus regarding the representation of nutrient competition and that observational and theoretical support for current implementations are weak. To reconcile this situation, we applied the Equilibrium Chemistry Approximation (ECA) theory to plant–microbe nitrogen competition in a detailed grassland 15 N tracer study and found that competition theories in current ESMs fail to capture observed patterns and the ECA prediction simplifies the complex nature of nutrient competition and quantitatively matches the 15 N observations. Finally, since plant carbon dynamics are strongly modulated by soil nutrient acquisition, we conclude that (1) predicted nutrient limitation effects on terrestrial carbon accumulation by existing ESMs may be biased and (2) our ECA-based approach may improve predictions by mechanistically representing plant–microbe nutrient competition.

15N tracer↗

Disparate effects of plant genotypic diversity on foliage and litter arthropod communities

Intraspecific diversity within plant species is increasingly recognized as an important influence on the structure of associated arthropod communities, though whether there are congruent responses of above- and belowground communities to intraspecific diversity remains unclear. In this study, we compare the effects of host-plant genotype and genotypic diversity of the perennial plant, Solidago altissima, on the arthropod community associated with living plant tissue (foliage-based community) and microarthropods associated with leaf litter (litter-based community). We found that variation among host-plant genotypes had strong effects on the diversity and composition of foliage-based arthropods, but only weak influence on litter-based microarthropods. Furthermore, host-plant genotypic diversity was positively related to the abundance and diversity of foliage-based arthropods, including herbivore and predator trophic levels. In contrast, there were minimal effects of genotypic diversity in litter on microarthropods. Our study illustrates that incorporating both above- and belowground perspective into community genetics studies leads to very different conclusions about the importance of intraspecific diversity, than when considering aboveground responses in isolation.

59 BASIC BIOLOGICAL SCIENCES↗

Refining water and carbon fluxes modeling in terrestrial ecosystems via plant hydraulics integration

Plant hydraulics substantially affects terrestrial water and carbon cycles by modulating water transport and carbon assimilation. Despite improved drought simulations in certain ecosystems through their integration into land surface models (LSMs), the broader application of plant hydraulics in diverse ecosystems and hydroclimates is still underexplored. Here, in this study, we implemented the recently developed Noah-Multiparameterization Land Surface Model (Noah-MP LSM) equipped with a plant hydraulics scheme (Noah-MP-PHS) across 40 FLUXNET sites globally. Employing the Shuffled Complex Evolution-University of Arizona (SCE-UA) auto-calibration algorithm, we optimized key plant hydraulics parameters for these sites spanning eight vegetation types in both arid and humid climates. Noah-MP-PHS significantly improves the simulation of evapotranspiration (ET) and gross primary production (GPP) by better representing atmospheric and soil water stress compared to traditional soil hydraulic schemes (SHSs, such as Noah and CLM). The augmented Noah-MP-PHS models reduce surface flux overestimation and underestimation, exhibiting an average increase of 0.14 and 0.15 in Kling-Gupta Efficiency (KGE) compared to Noah and CLM, respectively. The explicit consideration of plant capacitance in PHS reveals substantial deep-layer and nocturnal root water uptake especially under dry conditions. We employed eXplainable Machine learning (XML) to quantify the model’s relative sensitivity to newly introduced leaf-, stem and root-related parameters in PHS. The sensitivity analysis reveals a rise in root parameter importance and a decline in leaf and stem parameters as conditions shift from humid to arid. These findings indicate that as aridity states vary, the most influential parameters affecting surface fluxes variation may change in parameter calibration for PHS applications. Our findings underscore the importance of incorporating plant hydraulics into LSMs to enhance simulations of terrestrial water and carbon dynamics. These findings are crucial for understanding ecosystem responses to global climate changes and guide the broader application of PHS at larger scales.

54 ENVIRONMENTAL SCIENCES↗

Molecular mechanisms of the plant heat stress response

Highlights: ► This review elaborates the response networks of heat stress in plants. ► It elaborates proteins responding to heat stress in special physiological period. ► The proteins and pathways have formed a basic network of the heat stress response. ► Achievements of the various technologies are also combined. -- Abstract: High temperature has become a global concern, which seriously affects the growth and production of plants, particularly crops. Thus, the molecular mechanism of the heat stress response and breeding of heat-tolerant plants is necessary to protect food production and ensure crop safety. This review elaborates on the response networks of heat stress in plants, including the Hsf and Hsp response pathways, the response of ROS and the network of the hormones. In addition, the production of heat stress response elements during particular physiological periods of the plant is described. We also discuss the existing problems and future prospects concerning the molecular mechanisms of the heat stress response in plants.

60 APPLIED LIFE SCIENCES↗

Nutrient Capture from Aqueous Waste and Photocontrolled Fertilizer Delivery to Tomato Plants Using Fe(III)–Polysaccharide Hydrogels

Inexpensive and sustainable methods are needed to reclaim nutrients from agricultural waste solutions for use as a fertilizer while decreasing nutrient runoff. Fe(III)–polysaccharide hydrogels are able to flocculate solids and absorb nutrients in liquid animal waste from Confined Animal Feeding Operations (CAFOs). Fe(III)–alginate beads absorbed 0.05 mg g –1 NH 4 + and NO 3 - from 100 ppm solutions at pH = 7, with > 80% phosphate uptake and ~30% uptake of ammonium and nitrate. Ammonium uptake from a raw manure solution (1420 ppm NH 4 + ) showed a significant 0.7 mg g –1 uptake. Tomato plant trials carried out with Fe(III)–alginate hydrogel beads in greenhouse conditions showed controlled nutrient delivery for the plants compared to fertilizer solution with the same nutrient content. Plants showed an uptake of Fe from the gel beads, and Fe(III)–alginate hydrogel beads promoted root growth of the plants. The plants treated with nutrient-loaded Fe(III)–alginate hydrogels yielded comparable tomato harvest to plants treated with the conventional fertilizer solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the roles of microbes in facilitating plant adaptation to climate change

Plants benefit from their close association with soil microbes which assist in their response to abiotic and biotic stressors. Yet much of what we know about plant stress responses is based on studies where the microbial partners were uncontrolled and unknown. Under climate change, the soil microbial community will also be sensitive to and respond to abiotic and biotic stressors. Thus, facilitating plant adaptation to climate change will require a systems-based approach that accounts for the multi-dimensional nature of plant–microbe–environment interactions. In this perspective, we highlight some of the key factors influencing plant–microbe interactions under stress as well as new tools to facilitate the controlled study of their molecular complexity, such as fabricated ecosystems and synthetic communities. When paired with genomic and biochemical methods, these tools provide researchers with more precision, reproducibility, and manipulability for exploring plant–microbe–environment interactions under a changing climate.

59 BASIC BIOLOGICAL SCIENCES↗