SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Oscillator strengths for the X/1 Sigma+/ - A/1 Pi/ system of CH+ computed to an estimated accuracy of 10 percent from ab initio wave functions are presented. These oscillator strength values are given for the two strongest interstellar lines of 4232 and 3957 A.
A class of solutions to a model of forced oscillations in a rotating stratified atmospheric layer is derived and analyzed. The basic model is found to reduce to a boundary value problem with a second-order linear partial differential equation of the hyperbolic type for this range of forcing frequencies. The forced solutions are shown to exhibit resonances with the normal modes of oscillation of the layer. The characteristics of the resonant modes are analyzed in terms of mean tropospheric values of temperature, temperature lapse, wind speed, horizontal and vertical wind shears, latitude, and the frequency and horizontal wavelength of the forcing mechanism. These solutions are compared with solutions to the model for a different (subinertial) range of forcing frequencies. This comparison leads to an elliptic boundary value problem. The solutions in that case do not exhibit the same type of resonance and generally decay away from the region of forcing.
The diffusion of charged particles by randomly fluctuating low-frequency long-wavelength electrostatic oscillations in the magnetosphere is investigated as a possible mechanism for transporting ring current particles. The diffusion process is assumed to preserve the first adiabatic invariant. The magnetosphere is represented by a simple model with cylindrical geometry. In the model the ionospheres are assumed to be perfectly conducting and the ring current is assumed to have a Maxwellian distribution of velocities. The electrostatic oscillations are treated as natural modes of the magnetospheric cavity which are driven by variations in the electric potential on the magnetopause. It is concluded that diffusion of ring current protons by this process is not important in the magnetosphere.
The water tunnel which was constructed at the NASA Ames Research Center is described along with the flow field adjacent to an oscillating airfoil. The design and operational procedures of the tunnel are described in detail. Hydrogen bubble and thymol blue techniques are used to visualize the flow field. Results of the flow visualizations are presented in a series of still pictures and a high speed movie. These results show that time stall is more complicated than simple shedding from the leading edge or the trailing edge, particularly at relatively low frequency oscillations comparable to those of a helicopter blade. Therefore, any successful theory for predicting the stall loads on the helicopter blades must treat an irregular separated region rather than a discrete vortex passing over each blade surface.
A stable excitation supply for measurement transducers is described. It consists of a single-transistor oscillator with a coil connected to the collector and a capacitor connected from the collector to the emitter. The output of the oscillator is rectified and the rectified signal acts as one input to a differential amplifier; the other input being a reference potential. The output of the amplifier is connected at a point between the emitter of the transistor and ground. When the rectified signal is greater than the reference signal, the differential amplifier produces a signal of polarity to reduce bias current and, consequently, amplification.
A catalog of ATS-1 observed magnetic field oscillations is presented. The catalog holds only those events with a duration of at least ten minutes and with a frequency that remains roughly constant. Events are distinguished on the basis of the frequency of oscillations. A comparison was made between ATS-1 data and other ground and satellite magnetometer data.
Exact linearized solutions are provided for the longitudinal oscillations of missiles when the trajectory is nearly horizontal and the thrust is either zero, a specified constant value, or increasing with the square of the increasing flight speed. The results indicate that in all cases any increase in the thrust, or any acceleration along the nearly horizontal trajectory, will directly increase the damping of the angle-of-attack oscillations, whose increase in frequency is at first negligible, and then grows very slightly with time.
A continuous wave ultrasonic instrument capable of measuring very small changes in acoustic attenuation and phase velocity is described. This transmission oscillator ultrasonic spectrometer (TOUS) exhibits high sensitivity because it oscillates marginally. In spite of this high sensitivity, the TOUS system is relatively simple, compact, and inexpensive. These features suggest that the TOUS is suitable not only for precise laboratory measurements of the physical properties of materials, but also for field applications in nondestructive testing.
The problem of forced acoustic oscillations in a pipe was experimentally investigated, taking into account the response of both open and closed tubes to near-resonant excitation by large amplitude oscillations of a piston at one end of the tube. Attention was given to the effect of the orifice area on shock waves. By comparing the experimental results with nonlinear theory, wave reflection coefficients of the orifice plates were determined at both closed-tube and open-tube resonant frequencies. This approach can even be used when the terminating elements are subjected to intense periodic pressure pulses.
Oscillator consisting of Gunn diode embedded in coaxial circuit has excellent temperature stability and low fabrication costs as compared with automatic-frequency-control crystal oscillators.
Comparison of crystal oscillators to the rubidium stabilized color burst is made easy and inexpensive by use of the color bar phase meter. Required equipment consists of an unmodified color TV receiver, a color bar synthesizer and a stop watch (a wrist watch or clock with sweep second hand may be used with reduced precision). Measurement precision of 1 x 10 to the minus 10th power can be realized in measurement times of less than two minutes. If the color bar synthesizer were commercially available, user cost should be less than $200.00, exclusive of the TV receiver. Parts cost for the color bar synthesizer which translates the crystal oscillator frequency to 3.579MHz and modulates the received RF signal before it is fed to the receiver antenna terminals is about $25.00. A more sophisticated automated version, with precision of 1 x 10 to the minus 11th power would cost about twice as much.
Precision oscillators used in PTTI applications include quartz crystal, rubidium gas cell, cesium beam, and hydrogen maser oscillators. A general characterization and comparison of these devices is given including accuracy, stability, environmental sensitivity, size, weight, power consumption, availability and cost. Areas of special concern in practical applications are identified and a projection of future performance specifications is given. An attempt is made to predict physical and performance characteristics of new designs potentially available in the near future.
Recent measurements of the inherent short-term stability of quartz crystal resonators are presented. These measurements show that quartz resonators are much more stable for times less than 1s than the best available commercial quartz oscillators. A simple model appears to explain the noise mechanism in crystal controlled oscillators and points the way to design changes which should permit more than 2 orders of magnitude improvement in their short-term stability. Calculations show that a reference signal at 1 THz, derived from frequency multiplying a 5 MHz source with the above measured crystal stability, should have an instantaneous or fast linewidth of order 1 Hz. These calculations explicitly include the noise contribution of our present multiplier chains and are briefly outlined.
Long-period oscillations involving the entire mass of the sun rotate like rigid bodies, and their oscillatory power is distributed nonuniformly across the solar surface. A mostly qualitative theory is constructed showing how the oscillations drive convective flows of global scale, which then organize photospheric and coronal magnetic fields into patterns which rotate rigidly. The convection rises along long graceful curves, creating the magnetic-arcade structures in the corona and unipolar photospheric regions on each side by dynamo action. These are thought to be the origin of the sector structure in the solar wind. The rigid patterns of convective upwelling also force nonrigid horizontal winds on the solar surface. Under the action of the Coriolis force, the main horizontal motions are converted into polar and equatorial wind currents which have the proper directions to drive the differential rotation long observed on the sun's surface.
The dynamic stall phenomenon was examined in detail by analyzing a set of unsteady pressure data obtained on an airfoil oscillating in pitch. These data were for sinusoidal oscillations which penetrated the stall region in varying degrees, and here the effort was concentrated on the chordwise propagation of pressure waves associated with the dynamic stall. It was found that this phenomenon could be quantified in terms of a pressure wave velocity which is consistently much less than free-stream velocity, and which varies directly with frequency. It was also found that even when the stall region has been deeply penetrated and a substantial dynamic stall occurs during the downstroke, stall recovery near minimum incidence will occur, followed by a potential flow behavior up to stall inception.
It recently has been shown in the literature that many dc-to-square-wave parallel inverters which are widely used in power-conditioning applications can be grouped into one of two families. Each family is characterized by an equivalent RLC network. Based on this approach, a classification procedure is presented for self-oscillating parallel inverters which makes evident natural relationships which exist between various inverter configurations. By utilizing concepts from the basic theory of negative resistance oscillators and the principle of duality as applied to nonlinear networks, a chain of relationships is established which enables a methodical transfer of knowledge gained about one family of inverters to any of the other families in the classification array.
The equipment and techniques are described which are to be used in a project aimed at measuring oscillating air forces and dynamic aeroelastic response of a swept wing airplane at high subsonic speeds. Electro-hydraulic inertia type shakers installed in the wing tips will excite various elastic airplane modes while the related oscillating chordwise pressures at two spanwise wing stations and the wing mode shapes are recorded on magnetic tape. The data reduction technique, following the principle of a wattmeter harmonic analyzer employed by Bratt, Wight, and Tilly, utilizes magnetic tape and high speed electronic multipliers to record directly the real and imaginary components of oscillatory data signals relative to a simple harmonic reference signal. Through an extension of this technique an automatic flight-flutter-test data analyzer is suggested in which vector plots of mechanical admittance or impedance would be plotted during the flight test.
The paper describes measurements of fluctuations in the total electron content along the propagation path of the radio beam between the ATS-6 geostationary satellite and the ground station. Short-period oscillations of the total electron content of about plus or minus 8 time 10 to the 13th electrons per sq m with a period of about 30 to 50 seconds were detected. These oscillations appear to be well correlated with the appearance of Type PC 4 micropulsations.