Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optimization.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Fixed-order dynamic compensation through optimal projection

This paper reviews a formulation for the design of fixed-order dynamic compensation for flexible mechanical systems which is based upon explicit optimality conditions derived under the minimum data/maximum entropy stochastic modelling approach. The optimality conditions give rise to the novel concept of "optimal projection' which provides significant insight with regard to the compensator structure and permits earlier, more restricted and/or ad hoc design schemes to be seen as special cases of the present formulation.

Hyland, D. C.↗
NASA NTRS1981

Optimal interpolation and the Kalman filter

The estimation theory of stochastic-dynamic systems is described and used in a numerical study of optimal interpolation. The general form of data assimilation methods is reviewed. The Kalman-Bucy, KB filter, and optimal interpolation (OI) filters are examined for effectiveness in performance as gain matrices using a one-dimensional form of the shallow-water equations. Control runs in the numerical analyses were performed for a ten-day forecast in concert with the OI method. The effects of optimality, initialization, and assimilation were studied. It was found that correct initialization is necessary in order to localize errors, especially near boundary points. Also, the use of small forecast error growth rates over data-sparse areas was determined to offset inaccurate modeling of correlation functions near boundaries.

Cohn, S.↗
NASA NTRS1982

An optimal control approach to the design of moving flight simulators

An abstract flight simulator design problem is formulated in the form of an optimal control problem, which is solved for the linear-quadratic-Gaussian special case using a mathematical model of the vestibular organs. The optimization criterion used is the mean-square difference between the physiological outputs of the vestibular organs of the pilot in the aircraft and the pilot in the simulator. The dynamical equations are linearized, and the output signal is modeled as a random process with rational power spectral density. The method described yields the optimal structure of the simulator's motion generator, or 'washout filter'. A two-degree-of-freedom flight simulator design, including single output simulations, is presented.

Sivan, R.↗
NASA NTRS1983

ADS-1 - A new general-purpose optimization program

Today, numerous programs are available which may be coupled with finite element analysis or other analysis techniques to perform the optimization function in the solution of structural synthesis problems. However, most of these codes include only one or two algorithms and many have not been tested on problems of significant size and complexity. There is, therefore, a need for a reliable, general-purpose, publicly available code, containing a variety of modern algorithms for use in structural synthesis as well as general engineering design. The ADS-1 program (Automated Design Synthesis: Version 1) was written in response to this need. The present investigation has the objective to present the capabilities of the ADS program and to demonstrate its application to structural synthesis. The ADS program solves the general nonlinear constrained optimization problem in the standard form. At each level of the optimization process, several options are available.

Vanderplaats, G. N.↗
NASA NTRS1981

Optimal damper location in the vibration control of large space structures

The problem of finding the optimal location of active dampers for the vibration control of space structures is investigated. The optimal location is where maximum damping can be introduced to a particular vibration mode. To this end, classical root locus techniques are used to study the effect on eigenvalues of placing a damper on an undamped structure. An efficient formulation is derived which avoids the solution of the damped eigenvalue problem. Based on the observation of the results for a free-free beam model, a Minimum Constrained Frequency Criterion (MCFC) for locating the optimal damper location is proposed.

Wang, B. P.↗
NASA NTRS1982

Structural optimization with aeroelastic constraints - A survey of US applications

The paper describes recent developments in the United States in the application of structural optimization techniques to problems of design under aeroelastic constraints. The material is divided into sections on: (1) conventional strength design using aeroelastically calculated loads; (2) aeroelastic tailoring for improved performance; (3) design under flutter and static aeroelastic constraints; and (4) miscellaneous applications. Because of the high cost of applying formal optimization techniques to practical design problems, there have been very few applications of structural optimizations to actual aircraft. The paper is focused on trends that may eventually reverse this situation.

Haftka, R. T.↗
NASA NTRS1985

Algorithm Solves Constrained and Unconstrained Optimization Problems

Is quasi-Newton iteration utilizing Broyden/Fletcher/Goldfarb/Shanno update on inverse Hessian matrix. Capable of solving constrained optimization unconstrained optimization and constraints only problems with one to five independent variables from one to five constraint functions and one dependent function optimized.

Denson, M. A.↗
NASA NTRS1984

Wave drag as the objective function in transonic fighter wing optimization

The original computational method for determining wave drag in a three dimensional transonic analysis method was replaced by a wave drag formula based on the loss in momentum across an isentropic shock. This formula was used as the objective function in a numerical optimization procedure to reduce the wave drag of a fighter wing at transonic maneuver conditions. The optimization procedure minimized wave drag through modifications to the wing section contours defined by a wing profile shape function. A significant reduction in wave drag was achieved while maintaining a high lift coefficient. Comparisons of the pressure distributions for the initial and optimized wing geometries showed significant reductions in the leading-edge peaks and shock strength across the span.

Phillips, P. S.↗
NASA NTRS1984

Guaranteed robustness properties of multivariable nonlinear stochastic optimal regulators

The robustness of optimal regulators for nonlinear, deterministic and stochastic, multi-input dynamical systems is studied under the assumption that all state variables can be measured. It is shown that, under mild assumptions, such nonlinear regulators have a guaranteed infinite gain margin; moreover, they have a guaranteed 50 percent gain reduction margin and a 60 degree phase margin, in each feedback channel, provided that the system is linear in the control and the penalty to the control is quadratic, thus extending the well-known properties of LQ regulators to nonlinear optimal designs. These results are also valid for infinite horizon, average cost, stochastic optimal control problems.

Tsitsiklis, J. N.↗
NASA NTRS1984

Design of an optimal output feedback control system with modal insensitivity

This paper deals with the design of an output feedback controller which results in selected modal insensitivity, and at the same time optimizes a quadratic performance index representative of desired system performance for nominal plant parameter values. The approach taken here is to characterize the class of attainable eigenvectors for a given set of eigenvalues (distinct or non-distinct) which lie in a subspace called the 'Modal Insensitivity Subspace'. A constraint is established on the feedback matrix which results in modal insensitivity. Necessary conditions for optimality subject to the constraint on the feedback matrix are given. This forms the basis for a numerical algorithm to compute the optimal feedback gain which analyzed for convergence. To illustrate the procedure, a design is carried out using the lateral dynamics of an L-1011 aircraft.

Raman, K. V.↗
NASA NTRS1984

Composite laminate optimization program suitable for microcomputers

The design of a composite panel requires some way of finding the minimum thickness laminate which will withstand the load requirements without failure. The mathematical complexity of this problem dictates the use of nonlinear optimization techniques. Specialized laminate optimization programs were developed which are compact and efficient enough to run on microcomputers. Only stresses at a point and inplane loads and deflections are considered. The programs are simple to use and require no knowledge of optimization. Techniques are developed which find minimum thickness laminates with either ply ratios or ply angles as design variables. A method is presented for finding the optimum orientation for the axis of symmetry of an orthotropic laminate. The orthotropic laminate program uses an approximate failure theory, which speed up computations dramatically.

Flanagan, G. V.↗
NASA NTRS1984

Manual of phosphoric acid fuel cell power plant optimization model and computer program

An optimized cost and performance model for a phosphoric acid fuel cell power plant system was derived and developed into a modular FORTRAN computer code. Cost, energy, mass, and electrochemical analyses were combined to develop a mathematical model for optimizing the steam to methane ratio in the reformer, hydrogen utilization in the PAFC plates per stack. The nonlinear programming code, COMPUTE, was used to solve this model, in which the method of mixed penalty function combined with Hooke and Jeeves pattern search was chosen to evaluate this specific optimization problem.

Lu, C. Y.↗
NASA NTRS1985

Noise constraints effecting optimal propeller designs

A preliminary design tool for advanced propellers was developed combining a fast vortex lattice aerodynamic analysis, a fast subsonic point source noise analysis, and an optimization scheme using a conjugate directions method. Twist, chord and sweep distributions are optimized to simultaneously improve both the aerodynamic performance and the noise observed at a fixed relative position. The optimal noise/performance tradeoffs for straight and advanced concept blades are presented. The techniques used include increasing the blade number, blade sweep, reducing the rotational speed, shifting the spanwise loading and diameter changes.

Miller, C. J.↗
NASA NTRS1985

Optimal symmetric flight studies

Several topics in optimal symmetric flight of airbreathing vehicles are examined. In one study, an approximation scheme designed for onboard real-time energy management of climb-dash is developed and calculations for a high-performance aircraft presented. In another, a vehicle model intermediate in complexity between energy and point-mass models is explored and some quirks in optimal flight characteristics peculiar to the model uncovered. In yet another study, energy-modelling procedures are re-examined with a view to stretching the range of validity of zeroth-order approximation by special choice of state variables. In a final study, time-fuel tradeoffs in cruise-dash are examined for the consequences of nonconvexities appearing in the classical steady cruise-dash model. Two appendices provide retrospective looks at two early publications on energy modelling and related optimal control theory.

Weston, A. R.↗
NASA NTRS1983

Optimal design and use of retry in fault tolerant real-time computer systems

A new method to determin an optimal retry policy and for use in retry of fault characterization is presented. An optimal retry policy for a given fault characteristic, which determines the maximum allowable retry durations to minimize the total task completion time was derived. The combined fault characterization and retry decision, in which the characteristics of fault are estimated simultaneously with the determination of the optimal retry policy were carried out. Two solution approaches were developed, one based on the point estimation and the other on the Bayes sequential decision. The maximum likelihood estimators are used for the first approach, and the backward induction for testing hypotheses in the second approach. Numerical examples in which all the durations associated with faults have monotone hazard functions, e.g., exponential, Weibull and gamma distributions are presented. These are standard distributions commonly used for modeling analysis and faults.

Lee, Y. H.↗
NASA NTRS1984

Fuel-optimal maneuvers of a spacecraft relative to a point in circular orbit

Fuel optimal maneuvers of spacecraft relative to a body in circular orbit are investigated using a point mass model in which the magnitude of the thrust vector is bounded. All nonsingular optimal maneuvers consist of intervals of full thrust and coast and are found to contain at most seven such intervals in one period. Only four boundary conditions where singular solutions occur are possible. Computer simulation of optimal flight path shapes and switching functions are found for various boundary conditions. Emphasis is placed on the problem of soft rendezvous with a body in circular orbit.

Carter, T. E.↗
NASA NTRS1985

TRO-2D - A code for rational transonic aerodynamic optimization

Features and sample applications of the transonic rational optimization (TRO-2D) code are outlined. TRO-2D includes the airfoil analysis code FLO-36, the CONMIN optimization code and a rational approach to defining aero-function shapes for geometry modification. The program is part of an effort to develop an aerodynamically smart optimizer that will simplify and shorten the design process. The user has a selection of drag minimization and associated minimum lift, moment, and the pressure distribution, a choice among 14 resident aero-function shapes, and options on aerodynamic and geometric constraints. Design variables such as the angle of attack, leading edge radius and camber, shock strength and movement, supersonic pressure plateau control, etc., are discussed. The results of calculations of a reduced leading edge camber transonic airfoil and an airfoil with a natural laminar flow are provided, showing that only four design variables need be specified to obtain satisfactory results.

Davis, W. H., Jr.↗
NASA NTRS1985

Optimization methods applied to the aerodynamic design of helicopter rotor blades

This paper describes a formal optimization procedure for helicopter rotor blade designs which minimizes hover horsepower while assuring satisfactory forward flight performance. The approach is to couple hover and forward flight analysis programs with a general purpose optimization procedure. The resulting optimization system provides a systematic evaluation of the rotor blade design variables and their interaction, thus reducing the time and cost of designing advanced rotor blades. The paper discusses the basis for and details of the overall procedure, describes the generation of advanced blade designs for representative Army helicopters, and compares designs and design effort with those from the conventional approach which is based on parametric studies and extensive cross-plots.

Walsh, J. L.↗