Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Open quantum system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Your Best Single-Junction Solar Cell Does Not Always Make an Efficient Tandem Partner

Tandem solar cells, where multiple single-junction cells are combined optically in series, provide a path to making cells with high areal efficiencies, with multiple material systems capable of achieving greater than 30% efficiency under 1-sun conditions. However, there are many different material combinations and configurations used to make a tandem, and it can be challenging to understand how advances in one material system will impact the performance of a tandem device. Here, we have built an open-source calculator based on the spectral efficiency metric proposed by Yu et al. to easily enable calculation of spectral efficiency for single junctions and predicted maximum efficiency of tandem pairs, accounting for different optical and electrical coupling between the top and bottom junctions.

14 SOLAR ENERGY↗
DOE OSTI2015

Insight into the epitaxial growth of high optical quality GaAs{sub 1–x}Bi{sub x}

The ternary alloy GaAs{sub 1–x}Bi{sub x} is a potentially important material for infrared light emitting devices, but its use has been limited by poor optical quality. We report on the synthesis of GaAs{sub 1–x}Bi{sub x} epi-layers that exhibit narrow, band edge photoluminescence similar to other ternary GaAs based alloys, e.g., In{sub y}Ga{sub 1–y}As. The measured spectral linewidths are as low as 14 meV and 37 meV at low temperature (6 K) and room temperature, respectively, and are less than half of previously reported values. The improved optical quality is attributed to the use of incident UV irradiation of the epitaxial surface and the presence of a partial surface coverage of bismuth in a surfactant layer during epitaxy. Comparisons of samples grown under illuminated and dark conditions provide insight into possible surface processes that may be altered by the incident UV light. The improved optical quality now opens up possibilities for the practical use of GaAs{sub 1–x}Bi{sub x} in optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Tracing the Mott-Hubbard transition in one-dimensional Hubbard models without Umklapp scattering

Here we apply the density-matrix renormalization group (DMRG) method to a one-dimensional Hubbard model that lacks Umklapp scattering and thus provides an ideal case to study the Mott-Hubbard transition analytically and numerically. The model has a linear dispersion and displays a metal-to-insulator transition when the Hubbard interaction U equals the bandwidth U c = W, where the single-particle gap opens linearly, Δ(U ≥ W) = U - W. The simple nature of the elementary excitations permits us to determine numerically with high accuracy the critical interaction strength and the gap function in the thermodynamic limit. The jump discontinuity of the momentum distribution $n_k$ at the Fermi wave number $k_F$ = 0 cannot be used to locate accurately U c from finite-size systems. However, the slope of $n_k$ at the band edges $k_B$ = ±π, reveals the formation of a single-particle bound state which can be used to determine U c reliably from $n_k$ using accurate finite-size data.

1-dimensional systems↗
DOE OSTI2015

Time-dependent density functional theory for open systems with a positivity-preserving decomposition scheme for environment spectral functions

Understanding electronic dynamics on material surfaces is fundamentally important for applications including nanoelectronics, inhomogeneous catalysis, and photovoltaics. Practical approaches based on time-dependent density functional theory for open systems have been developed to characterize the dissipative dynamics of electrons in bulk materials. The accuracy and reliability of such approaches depend critically on how the electronic structure and memory effects of surrounding material environment are accounted for. In this work, we develop a novel squared-Lorentzian decomposition scheme, which preserves the positive semi-definiteness of the environment spectral matrix. The resulting electronic dynamics is guaranteed to be both accurate and convergent even in the long-time limit. The long-time stability of electronic dynamics simulation is thus greatly improved within the current decomposition scheme. The validity and usefulness of our new approach are exemplified via two prototypical model systems: quasi-one-dimensional atomic chains and two-dimensional bilayer graphene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Benchmarking treewidth as a practical component of tensor network simulations

Tensor networks are powerful factorization techniques which reduce resource requirements for numerically simulating principal quantum many-body systems and algorithms. The computational complexity of a tensor network simulation depends on the tensor ranks and the order in which they are contracted. Unfortunately, computing optimal contraction sequences (orderings) in general is known to be a computationally difficult (NP-complete) task. In 2005, Markov and Shi showed that optimal contraction sequences correspond to optimal (minimum width) tree decompositions of a tensor network’s line graph, relating the contraction sequence problem to a rich literature in structural graph theory. While treewidth-based methods have largely been ignored in favor of dataset-specific algorithms in the prior tensor networks literature, we demonstrate their practical relevance for problems arising from two distinct methods used in quantum simulation: multi-scale entanglement renormalization ansatz (MERA) datasets and quantum circuits generated by the quantum approximate optimization algorithm (QAOA). We exhibit multiple regimes where treewidth-based algorithms outperform domain-specific algorithms, while demonstrating that the optimal choice of algorithm has a complex dependence on the network density, expected contraction complexity, and user run time requirements. We further provide an open source software framework designed with an emphasis on accessibility and extendability, enabling replicable experimental evaluations and future exploration of competing methods by practitioners.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Towards critical and supercritical electromagnetic fields

Abstract The availability of ever stronger, laser-generated electromagnetic fields underpins continuing progress in the study and application of nonlinear phenomena in basic physical systems, ranging from molecules and atoms to relativistic plasmas and quantum electrodynamics. This raises the question: how far will we be able to go with future lasers? One exciting prospect is the attainment of field strengths approaching the Schwinger critical field ${E}_{\mathrm{cr}}$ in the laboratory frame, such that the field invariant ${E}^2-{c}^2{B}^2>{E}_{\mathrm{cr}}^2$ is reached. The feasibility of doing so has been questioned, on the basis that cascade generation of dense electron–positron plasma would inevitably lead to absorption or screening of the incident light. Here we discuss the potential for future lasers to overcome such obstacles, by combining the concept of multiple colliding laser pulses with that of frequency upshifting via a tailored laser–plasma interaction. This compresses the electromagnetic field energy into a region of nanometre size and attosecond duration, which increases the field magnitude at fixed power but also suppresses pair cascades. Our results indicate that laser facilities with peak power of tens of PW could be capable of reaching ${E}_{\mathrm{cr}}$ . Such a scenario opens up prospects for the experimental investigation of phenomena previously considered to occur only in the most extreme environments in the universe.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Experiments on Quantum Hall Topological Phases in Ultra Low Temperatures

This project is to cool electrons in semiconductors to extremely low temperatures and to study new states of matter formed by low-dimensional electrons (or holes). At such low temperatures (and with an intense magnetic field), electronic behavior differs completely from ordinary ones observed at room temperatures or regular low temperature. Studies of electrons at such low temperatures would open the door for fundamental discoveries in condensed matter physics. Present studies have been focused on topological phases in the fractional quantum Hall effect in GaAs/AlGaAs semiconductor heterostructures, and the newly discovered (by this group) quantum spin Hall effect in InAs/GaSb materials. This project consists of the following components: 1) Development of efficient sample cooling techniques and electron thermometry: Our goal is to reach 1 mK electron temperature and reasonable determination of electron temperature; 2) Experiments at ultra-low temperatures: Our goal is to understand the energy scale of competing quantum phases, by measuring the temperature-dependence of transport features. Focus will be placed on such issues as the energy gap of the 5/2 state, and those of 12/5 (and possible 13/5); resistive signature of instability near 1/2 at ultra-low temperatures; 3) Measurement of the 5/2 gaps in the limit of small or large Zeeman energies: Our goal is to gain physics insight of 5/2 state at limiting experimental parameters, especially those properties concerning the spin polarization; 4) Experiments on tuning the electron-electron interaction in a screened quantum Hall system: Our goal is to gain understanding of the formation of paired fractional quantum Hall state as the interaction pseudo-potential is being modified by a nearby screening electron layer; 5) Experiments on the quantized helical edge states under a strong magnetic field and ultralow temperatures: our goal is to investigate both the bulk and edge states in a quantum spin Hall insulator under time-reversal symmetry-broken conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Open and closed loop manipulation of charged microchiplets in an electric field

We demonstrate the ability to orient, position, and transport microchips (“chiplets”) with electric fields. In an open-loop approach, modified four phase traveling wave potential patterns manipulate chiplets in a dielectric solution using dynamic template agitation techniques. Repeatable parallel assembly of chiplets is demonstrated to a positional accuracy of 6.5 μm using electrodes of 200 μm pitch. Chiplets with dipole surface charge patterns are used to show that orientation can be controlled by adding unique charge patterns on the chiplets. Chip path routing is also demonstrated. With a closed-loop control system approach using video feedback, dielectric, and electrophoretic forces are used to achieve positioning accuracy of better than 1 μm with 1 mm pitch driving electrodes. These chip assembly techniques have the potential to enable future printer systems where inputs are electronic chiplets and the output is a functional electronic system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

The Quest for the Ultimate Anisotropic Banach Space

We present a new scale U{sub p}{sup t,s} (s<−t<0 and 1≤p<∞) of anisotropic Banach spaces, defined via Paley–Littlewood, on which the transfer operator L{sub g}φ=(g⋅φ)∘T{sup −1} associated to a hyperbolic dynamical system T has good spectral properties. When p=1 and t is an integer, the spaces are analogous to the “geometric” spaces B{sup t,|s+t|} considered by Gouëzel and Liverani (Ergod Theory Dyn Syst 26:189–217, 2006). When p>1 and −1+1/p<s<−t<0<t<1/p, the spaces are somewhat analogous to the geometric spaces considered by Demers and Liverani (Trans Am Math Soc 360:4777–4814, 2008). In addition, just like for the “microlocal” spaces defined by Baladi and Tsujii (Ann Inst Fourier 57:127–154, 2007) (or Faure–Roy–Sjöstrand in Open Math J 1:35–81, 2008), the transfer operator acting on U{sub p}{sup t,s} can be decomposed into L{sub g,b}+L{sub g,c}, where L{sub g,b} has a controlled norm while a suitable power of L{sub g,c} is nuclear. This “nuclear power decomposition” enhances the Lasota–Yorke bounds and makes the spaces U{sub p}{sup t,s} amenable to the kneading approach of Milnor–Thurson (Dynamical Systems (Maryland 1986–1987), Springer, Berlin, 1988) (as revisited by Baladi–Ruelle, Baladi in Dynamical Zeta Functions and Dynamical Determinants for Hyperbolic Maps, Monograph, 2016; Baladi and Ruelle in Ergod Theory Dyn Syst 14:621–632, 1994; Baladi and Ruelle in Invent Math 123:553–574, 1996) to study dynamical determinants and zeta functions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Asymmetric high energy dual optical parametric amplifier for parametric processes and waveform synthesis

We report on an asymmetric high energy dual optical parametric amplifier (OPA) which is capable of having either the idlers, signals, or depleted pumps, relatively phase locked at commensurate or incommensurate wavelengths. Idlers and signals can be locked on the order of 200 mrad rms or better, corresponding to a 212 as jitter at λ =2 µ m. The high energy arm of the OPA outputs a combined 3.5 mJ of signal and idler, while the low energy arm outputs 1.5 mJ, with the entire system being pumped with a 1 kHz, 18 mJ Ti:Sapphire laser. Both arms are independently tunable from 1080 nm-2600 nm. The combination of relative phase locking, high output power and peak intensity, and large tunability makes our OPA an ideal tool for use in difference frequency generation (DFG) in the strong pump regime, and for high peak field waveform synthesis in the near-infrared. To demonstrate this ability we generate terahertz radiation through two color waveform synthesis in air plasma and show the influence of the relative phase on the generated terahertz intensity. The ability to phase lock multiple incommensurate wavelengths at high energies opens the door to a multitude of possibilities of strong pump DFG and waveform synthesis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Magnetic interactions of 4 f electrons in the topological insulator chalcogenide Bi 2 Se 3

Here, the gap opening mechanism of a topological insulator, the quantum anomalous Hall effect and the axion physics are still pressing open questions and a microscopic viewpoint to further understand the role of magnetism in topology is highly desirable. In this work we have performed a micro scopic investigation, by means of electron spin resonance (ESR) along with complementary bulk measurements, on the chalcogenide (Bi 1-x Gd x ) 2 Se 3 (x = 0, 0.001, 0.002 and 0.006). Our analysis of the Gd 3+ spin dynamics reveal no significant change of the Fermi surface as a function of Gd 3+ concentration, which indicates that the 4f magnetism is different from the non-local effects induced by transition metals (d electrons) substitutions. Additionally, we observe an unusual evolution of the Gd 3+ ESR spectra as a function of the applied magnetic field, which we discuss considering the magnetic interaction between Gd 3+ 4f electrons and impurity centers such as Se vacancies. This interaction would give rise to a local weak antilocalization effect surrounding the Gd 3+ ions. Such mechanism is observable due to particular details of the Gd 3+ 4f electrons magnetism in this system compared to d electrons. Our work points out that rare earth substitutions in this model topological insulator is a promising path to explore the axion insulating systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Combined effects of emitter–emitter and emitter–plasmonic surface separations dictate photoluminescence enhancement in a plasmonic field

The brightness of an emitter can be enhanced by metal-enhanced fluorescence, wherein the excitonic dipole couples with the electromagnetic field of the surface plasmon. In this report, we experimentally map the landscape of photoluminescence enhancement (EF exp ) of emitters in a plasmonic field as a function of the emitter–emitter separation, s, and the emitter–plasmon distance, t. We use Au nanoparticles overcoated with inert spacers as plasmonic systems and CdSe/ZnS quantum dots (QDs) as an emitter bearing opposite surface charges. The t and s are varied by changing the spacer thickness and number density of QDs on the plasmonic surface, respectively. The electrostatic binding of emitters on the plasmonic surface and their number density are established by following the variation of zeta-potential. EF exp is high, when t is short and s is large; nevertheless, it decreases when the emitter–emitter interaction dominates due to plasmon assisted nonradiative processes. In the absence of a plasmonic field, the enhancement observed is attributed to environmental effects and is independent of s, confirming the role of the electric field. Indeed, the distance dependence of EF exp closely follows the decay of the plasmonic field upon dilution of the emitter concentration on nanoparticles’ surface (s = 18 nm). The QD–plasmon system is visualized in the framework of the Thomson problem, and classical electrodynamics calculations give the trends in t and s dependence of the photoluminescence. Being the first report on the simultaneous dependence of t and s on plasmon-enhanced photoluminescence, the results presented herein will open newer opportunities in the design of hybrid systems with a high brightness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Swept source optical coherence tomography for in vivo imaging and vibrometry in the apex of the mouse cochlea

Cochlear amplification has been most commonly investigated by measuring the vibrations of the basilar membrane in animal models. Several different techniques have been used for measuring these vibrations such as laser Doppler vibrometry, miniature pressure sensors, low coherence interferometry, and spectral-domain optical coherence tomography (SD-OCT). We have built a swept-source OCT (SS-OCT) system, which is similar to SD-OCT in that it is capable of performing both imaging and vibration measurements within the mouse cochlea in vivo without having to open the bone. In vivo 3D images of a mouse cochlea were obtained, and the basilar membrane, tectorial membrane, Reissner’s membrane, tunnel of Corti, and reticular lamina could all be resolved. We measured vibrations of multiple structures within the mouse cochlea to sound stimuli. As well, we measured the radial deflections of the reticular lamina and tectorial membrane to estimate the displacement of the outer hair cell stereocilia. These measurements have the potential to more clearly define the mechanisms underlying the linear and non-linear processes within the mammalian cochlea.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Random insights into the complexity of two-dimensional tensor network calculations

Projected entangled pair states (PEPS) offer memory-efficient representations of some quantum many-body states that obey an entanglement area law and are the basis for classical simulations of ground states in two-dimensional (2d) condensed matter systems. However, rigorous results show that exactly computing observables from a 2d PEPS state is generically a computationally hard problem. Yet approximation schemes for computing properties of 2d PEPS are regularly used, and empirically seen to succeed, for a large subclass of (“not too entangled”) condensed matter ground states. Adopting the philosophy of random matrix theory, in this work, we analyze the complexity of approximately contracting a 2d random PEPS by exploiting an analytic mapping to an effective replicated statistical mechanics model that permits a controlled analysis at a large bond dimension. Through this statistical-mechanics lens, we argue that (i) although approximately sampling wave-function amplitudes of random PEPS faces a computational-complexity phase transition above a critical bond dimension, and (ii) one can generically efficiently estimate the norm and correlation functions for any finite bond dimension. Furthermore, these results are supported numerically for various bond-dimension regimes. It is an important open question whether the above results for random PEPS apply more generally also to PEPS representing physically relevant ground states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

A quantitative model for a nanoscale switch accurately predicts thermal actuation behavior

Manipulation of temperature can be used to actuate DNA origami nano-hinges containing gold nanoparticles. We develop a physical model of this system that uses partition function analysis of the interaction between the nano-hinge and nanoparticle to predict the probability that the nano-hinge is open at a given temperature. The model agrees well with experimental data and predicts experimental conditions that allow the actuation temperature of the nano-hinge to be tuned over a range of temperatures from 30 °C to 45 °C. Additionally, the model identifies microscopic interactions that are important to the macroscopic behavior of the system, revealing surprising features of the system. This combination of physical insight and predictive potential is likely to inform future designs that integrate nanoparticles into dynamic DNA origami structures or use strand binding interactions to control dynamic DNA origami behavior. Furthermore, our modeling approach could be expanded to consider the incorporation, stability, and actuation of other types of functional elements or actuation mechanisms integrated into nucleic acid devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Gravity Probe Spin: Prospects for measuring general-relativistic precession of intrinsic spin using a ferromagnetic gyroscope

An experimental test at the intersection of quantum physics and general relativity is proposed: measurement of relativistic frame dragging and geodetic precession using intrinsic spin of electrons. Furthermore, the behavior of intrinsic spin in spacetime dragged and warped by a massive rotating body is an experimentally open question, hence the results of such a measurement could have important theoretical consequences. Such a measurement is possible by using mm-scale ferromagnetic gyroscopes in orbit around the Earth. Under conditions where the rotational angular momentum of a ferromagnet is sufficiently small, a ferromagnet’s angular momentum is dominated by atomic electron spins and is predicted to exhibit macroscopic gyroscopic behavior. If such a ferromagnetic gyroscope is sufficiently isolated from the environment, rapid averaging of quantum uncertainty via the spin-lattice interaction enables readout of the ferromagnetic gyroscope dynamics with sufficient sensitivity to measure both the Lense-Thirring (frame dragging) and de Sitter (geodetic precession) effects due to the Earth.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Regulation of flow through a T-Shaped open cavity by temperature dependent P, PI, and PID controllers

P (proportional), PI (proportional-integral), and PID (proportional-integral-derivative) controllers are popular means of controlling industrial processes. Due to superior response, accuracy, and stable performance, PID controllers are mostly used in control systems. This paper presents a mathematical model and subsequent response analysis regarding regulation of flow in mixed convection through a T-shaped open cavity by temperature dependent controllers. The T-shaped cavity has cold top and hot bottom walls, while air is flowing through the inlet at surrounding temperature. The inflow is regulated by a controlled gate which operates according to the signal received from the controller. Values of proportional gain (k{sub p}), integral gain (k{sub i}), and derivative gain (k{sub d}) are varied to obtain the desired system response and to ensure a stable system with fastest response. At first, only P controller is used and eventually PI and finally PID control scheme is applied for controller tuning. Tuning of different controllers (P, PI, and PID) are carried out systematically based on the reference temperature which is continuously monitored at a certain location inside the cavity. It is found that PID controller performs better than P or PI controller.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Ultrafast recovery time and broadband saturable absorption properties of black phosphorus suspension

As a new type of two-dimensional crystal material, black phosphorus (BP) exhibits excellent electronics and optical performance. Herein, we focus on carrier relaxation dynamics and nonlinear optical properties of BP suspension. Atomic force microscopy, transmission electron microscopy, and optical transmission spectrum are employed to characterize the structure and linear optical properties of the BP. Additionally, pump-probe experiments at wavelength of 1550 nm were carried out to study the carrier dynamics in BP suspension, and ultrafast recovery time was observed (τ{sub s} = 24 ± 2 fs). Furthermore, we demonstrate the saturable absorption signals by open aperture Z-scan experiments at wavelengths of 1550 nm, 532 nm, and 680 nm. The results indicate that BP has broadband saturable absorption properties and the nonlinear absorption coefficients were determined to be β{sub 2} = −0.20 ± 0.08 × 10{sup −3 }cm/GW (532 nm), β{sub 2} = −0.12 ± 0.05 × 10{sup −3 }cm/GW (680 nm), and β{sub 2} = −0.15 ± 0.09 × 10{sup −3 }cm/GW (1550 nm)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗