Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Notes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Petrology of ALHA 81005, the first lunar meteorite

The meteorite thought to be best described as a lunar highland regolith breccia from a non-KREEPy region. The controversy that remains as to the most likely source region is discussed. It is noted that several large lunar nearside craters have been proposed (Ostertag and Ryder, 1983). After finding a very-low-titanium (VLT) mare basalt clast in a thin section of ALHA 81005, Treiman and Drake (1983) have suggested that this constrains the source to being near a region with VLT basalt. It is pointed out, however, that the unexplored far side of the moon cannot be ruled out. Most of the lithic clasts that are abundant in the meteorite are members of the anorthosite-norite-troctolite highland suite. It is noted that plagioclase compositions in lithic clasts and single grains are calcic (An94-98).

Simon, S. B.↗
NASA NTRS1983

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodies commercial transport aircraft

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after 9 years of service. There are six Kevlar-49 panels on each aircraft: a left hand and right hand set of a wing body sandwich fairing; a solid laminate under wing fillet panel; and a 422 K (300 F) service aft engine fairing. The fairings have accumulated a total of 70,000 hours, with one ship set having over 24,000 hours service. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings. The service history to date indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.

Stone, R. H.↗
NASA NTRS1984

Regulation of hematopoiesis in the suspended rat as a model for space flight

A series of studies was completed in which a variety of routine hematological and other parameters were obtained from sequential sampling of control and suspended rats. These data showed that, during suspension, the rats failed to gain weight at the same rate as the controls, ate and drank significantly less, demonstrated a transient increase in peripheral hematocrit and RBC count, a transient decrease in MCH, suppressed reticulocyte counts and a progressive decrease in MCV but no change in RBC shape. Leukocyte counts were variably decreased but no significant changes in platelet numbers were noted. Post-suspension, evidence of anemia was present from a reduced RBC count, hemoglobin, hematocrit, and MCV. A leukocytosis was also noted. Efforts directed to the collection of data aimed at understanding changes in blood volume during suspension are also discussed. As part of these studies the following parameters were investigated; RBC survival, in vitro leukocyte reactivity to PHA, bone marrow and spleen cellularity and morphology, ferrokinetics, and the hematopoietic inductive microenvironment.

Dunn, C. D. R.↗
NASA NTRS1984

Dark streaks on talus slopes, Mars

High-resolution pictures of talus slopes on Mars show small, dark streaks that characteristically widen downward. These streaks are different from the thin and even streaks of various albedos that stream from cliffs on talus slopes, but gradations between the two streak types occur and not all streaks can be classified with confidence. In order to study the nature and origin of the small, widening, dark streaks, all Viking pictures with a resolution of less than 100 m/pixel were surveyed. To date several hundred streaks were located, but only few are of high enough resolution to be confidently identified as widening downwards. The approximate dimensions of the streaks were measured and their shapes, numbers, position, and spacing on slopes were noted. They were plotted on a topographic map, and their relation to topography, geologic units, and regions of distinct thermal inertia and albedo were studied. Also noted was the season at which images containing streaks were acquired and the direction of illumination. Albedo measurements are in progress. Several streaks can be seen stereoscopically, but none are observed on color images. The observation of small dark streaks on talus slopes on Mars is compatible with an interpretation of their origin as eruptions of small masses of wet debris in places where steep walls intersect aquifers or where seasonal equatorial warming permits the local melting of ground ice.

Ferguson, H. M.↗
NASA NTRS1984

Nitrogen threshold experiment

In order to obtain data on Earth geologic processes associated with wind erosion, Mar's and Venus' atmospheres were simulated. Experiments were designed to observe the effects of pressure, gravity, and density on sand movement. An experiment designed to test the operator variance was a comparative test between nitrogen and carbon dioxide. Pressure and therefore density was increased until threshold was noted. Threshold was determined at precisely the same densities of the two gases. If viscosity were a contributing factor in grain saltation the effect would be noted at low pressures. The experiment showed no such variance between carbon dioxide and nitrogen runs for low pressure (density). The largest difference in viscosity between carbon dioxide and nitrogen occurs at low pressures (densities).

Treat, C. L.↗
NASA NTRS1984

Unsteady flow in turbomachinery: An overview

The importance of understanding and modeling the unsteady flow phenomena in turbomachinery is discussed. Historical events in the application and development of gas turbines for aircraft propulsion are traced. Technology advancements over the years are highlighted with focus on the compression system components. Trends in compressor research within the National Advisory Committee for Aeronautics (NACA)/National Aeronautics and Space Administration (NASA) are noted. The impact of technology advancements on the increased occurrences of unsteady flow related problems in advanced engine development programs is discussed. The impact of the new and more demanding requirements being imposed on the propulsion system to meet advanced aircraft mission needs are also noted. Brief discussions on the present day understanding and modeling capability of the unsteady flow phenomena are presented to include discussions on rotating stall, surge, flutter, forced response and noise generation.

Source record↗
NASA NTRS1983

Device for determining frost depth and density

A hand held device having a forward open window portion adapted to be pushed downwardly into the frost on a surface, and a rear container portion adapted to receive the frost removed from the window area are described. A graph on a side of the container enables an observer to determine the density of the frost from certain measurements noted. The depth of the frost is noted from calibrated lines on the sides of the open window portion.

Huneidi, F.↗
NASA NTRS1984

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodied commercial transport aircraft

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after 10 years of service. There are six Kevlar-49 panels on each aircraft: a left-hand and right-hand set of a wing-body sandwich fairing; a solid laminate under-wing fillet panel; and a 422 K (300 F) service aft engine fairing. The three L-1011s include one each in service with Eastern, Air Canada, and TWA. The fairings have accumulated a total of 79,568 hours, with one ship set having nearly 28,000 hours service. The inspections were conducted at the airlines' major maintenance bases with the participation of Lockheed Engineering. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings. The service history obtained in this program indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.

Stone, R. H.↗
NASA NTRS1984

Characterization of Open Circuit Voltage and Capacity as a Function of Time

It is noted from the data presented that Li/BCX cells lose approximately 8% of their rated capacity in the first 2 months of storage. After this period of time, little difference is noted in the average realized capacity; however, a significant increase in the range is observed. Over the same period of time the OCV falls at a rate of 0.02V per 1,000 hours. After a period of 8,000 hours the OCV appears stabilize at a value of approximately 3.75V. This may be related to changes in Cl2 concentration due to self-discharge or other reactions. These data indicate that no correlation exists between the reduced open circuit voltage and the realized capacity.

Krehl, P. W.↗
NASA NTRS1983

On obtaining the forward phase functions of Saturn ring features from radio occultation observations

It is noted that the near-forward scattering functions of particles in Saturn ring features are related to 3.6 cm radio occultation power spectra by a Fredholm integral equation of the first kind. The equation reduces to an algebraic system of equation whose solution by usual inversion techniques (that is, least mean squares) is ruled out by the near singularity of the forward transformation matrix. A combination of constrained linear inversion and a filtering algorithm based on eigenvector decomposition of the matrix reduces the instabilities; this yields derived phase functions valid over the range of zero to about 12 mrad. It is noted that these functions represent the collective forward diffraction lobe of particles greater than about 1 m in radius. Since multiple scattering of the signal is a significant effect, the measured phase functions must be adjusted to obtain the singly scattered component. This single-scattering correction is examined for two physical models, namely the monolayer and the classical discrete random slab; in addition, the fraction of opacity in submeter particles for each model for particular ring features is estimated.

Zebker, H. A.↗
NASA NTRS1983

Single event upset (SEU) of semiconductor devices - A summary of JPL test data

The data summarized describe single event upset (bit-flips) for 60 device types having data storage elements. The data are from 15 acceleration tests with both protons and heavier ions. Tables are included summarizing the upset threshold data and listing the devices tested for heavy ion induced bit-flip and the devices tested with protons. With regard to the proton data, it is noted that the data are often limited to one proton energy, since the tests were usually motivated by the engineering requirement of comparing similar candidate devices for a system. It is noted that many of the devices exhibited no upset for the given test conditions (the maximum fluence and the maximum proton energy Ep are given for these cases). It is believed, however, that some possibility of upset usually exists because there is a slight chance that the recoil atom may receive up to 10 to 20 MeV of recoil energy (with more energy at higher Ep).

Nichols, D. K.↗
NASA NTRS1984

Asteroid rotation rates

A trend of increasing mean rotational frequency with increasing diameter is noted in asteroids with diameters greater than 120 km, irrespective of M-, S-, and C-type asteroid subset and family or nonfamily membership. This trend cannot be accounted for by observational selection. For asteroids with diameters smaller than 120 km mean rotational frequency increases with decreasing diameter, but within this group there is a subset with exceptionally long rotational periods. This marked change in the distribution at 120-km diameter could separate primordial asteroids from their collision products. It is also noted that, for asteroids of a given diameter, M asteroids rotate faster than S asteroids, which in turn rotate faster than C asteroids. For all types, family members rotate faster than nonfamily members.

Dermott, S. F.↗
NASA NTRS1984

Micas in experimentally shocked gneiss

Powder-propellant guns are used to shock biotites and muscovites from a gneiss at pressures between 18 and 70 GPa. It is shown that shock in biotite and muscovite can produce homogeneous and devolatilized glasses within microseconds. Shock-deformed micas are found to exhibit fracturing, kinking, and complex extinction patterns over the entire pressure range investigated. Localized melting of micas commences at 33 GPa and reaches completion at 70 GPa. Even though melted biotite and muscovite are opaque optically, they exhibit extensive microvesiculation and flow when observed with the SEM. It is confirmed through electron diffraction that biotite and muscovite have transformed to a glass. The distribution of vesicles in shock-vitrified mica reveals escape of volatiles within the short duration of the shock experiment. It is noted that experimentally shocked biotite and muscovite undergo congruent melting. It is noted that the compositions of the glasses are similar to the unshocked micas except for volatiles (H2O loss and and K loss). These unusual glasses produced from mica can be quenched by rapid cooling conditions during the shock experiment. On the basis of the results, it is pointed out that the extremely low H2O content of tektites can be reconciled with a terrestrial origin by impact.

Lambert, P.↗
NASA NTRS1984

Studies of an artificially shock-loaded H group chondrite

SEM and TEM, together with thermoluminescence (TL), are used to study five samples of the naturally unshocked Kernouve (H6) meteorite that were shock-loaded to pressures of 70, 165, 270, and 390 kbar. Attention is given to olivine and orthopyroxene deformation mechanisms at these pressure levels. The microhardness of the kamacite in the samples increases with shock pressure, and it is noted that annealed kamacite displays incipient crystallinity, while alpha-martensite and taenite sometimes contain slip lines. At pressures over 200 kbar, there was a systematic decrease in both natural TL and TL sensitivity. Changes in the ratio of these two values for various regions of the TL glow curve suggest that two processes were effective during shock: thermal drainage of electron traps and a reduction in the effective trap density. Thermal effects with widespread annealing are noted in the case of a sample subjected to shock pulse.

Sears, D. W.↗
NASA NTRS1983

Regenerable non-venting thermal control subsystem for extravehicular activity

Extravehicular Mobility Unit heat rejection requirements have been formulated for both Space Shuttle Orbiter and space station regenerable nonventing thermal sink (RNTS) applications, where the former involve nonventing extravehicular activity (EVA) missions and the latter both nonventing and regenerable EVA. The present conceptual study notes that while the exclusive use of thermal storage is suitable for the Space Shuttle mission, space station requirements are best satisfied by a hybrid system which combines thermal storage with radiator and heat pump. The Space Shuttle RNTS thermal control subsystem's thermal storage unit uses water as a phase change medium. It is noted that the same heat storage unit can satisfy the Space Shuttle and space station requirements.

Roebelen, G. J., Jr.↗
NASA NTRS1984

Chemical and physical studies of type 3 chondrites. III Chondrules from the Dhajala H3.8 chondrite

Thermoluminescence (TL) properties have been measured in 58 chondrules separated from the Dhajala H3.8 chondrite. The pyrolytic chondrules are noted to have higher mass-normalized TL values than nonpyrolytic ones. Significant correlations are noted between log(TL) and the bulk CaO, Al2O3, and MnO content of the chondrules. These, together with correlations of log(TL) with the CaO, Al2O3, SiO2 and normative anorthite content of the chondrule glass, indicate an association of the TL and the abundance and position of mesostasis. It is suggested that the TL level in a given chondrule is governed by its bulk composition and metamorphism, and it is hypothesized that the devitrification resistance of unequilibrated chondrule mesostasis explains the unequilibration of certain chondrules in type 3 ordinary chondrites.

Sears, D. W. G.↗
NASA NTRS1984

Investigation of RF excited CW CO2 waveguide lasers

The RF excited 2 to 3W CW CO2 waveguide lasers with lifetimes of the order of 10(4) to 2.10(4) hours were produced. This was achieved with CO and N2 bearing gas mixtures and with internal as well as external discharge electrodes. It is noted that these tests were conducted with unstabilized lasers which drift around in their signatures. The average power output was reduced to about one half of the highest peak power output in the signature. One of the lasers, no. 1.1, still shows 60% of its original output power after it was cycled on and off every 10 minutes for more than 50,000 times. The starting voltage and driving point impedance of the RF excited gas discharge structure for different gas pressures and mixtures were measured. These data will serve as a basis for the matching and starting network optimization. The second laser body was frit and indium sealed. To our a vacuum leak between the bore and electrode holes was noted. The leak seems to be due to a defect or crack in the BeO body.

Hochuli, U.↗
NASA NTRS1984

Polycrystalline silicon material availability and market pricing outlook for 1980 through 1988

The results of the second JPL update to an original report to assess the availability and prices of polycrystalline Si for solar cells in the 1983-88 interval are reported. It is noted that the demand for poly-Si for solar cells competes with the demand for the same material for semiconductors, although the solar cell industry can use material rejected from the semiconductor industry. A sufficient supply is projected for the 6 yr period, rising from 3224 metric tons to 10,220 metric tons in 1988, with prices dropping from the 1980 level of $140/kg to $25/kg. The price reduction and improved production are noted to be due in large part to DOE efforts at defining lower-cost production processes.

Costogue, E. N.↗