Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetic ordering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A-type antiferromagnetic order in MnBi 4 Te 7 and MnBi 6 Te 10 single crystals

MnBi 4 Te 7 and MnBi 6 Te 10 are two members with n = 2 and 3 in the family of MnBi 2 n Te 3 n + 1 where the n = 1 member, MnBi 2 Te 4 , has been intensively investigated as the first intrinsic antiferromagnetic topological insulator. In this work, we report the A-type antiferromagnetic order in these two compounds by measuring magnetic properties, electrical and thermal transport, specific heat, and single-crystal neutron diffraction. Both compounds order into an A-type antiferromagnetic structure as does MnBi 2 Te 4 with ferromagnetic planes coupled antiferromagnetically along the crystallographic c axis. While no evidence for any in-plane ordered moment is found for MnBi 2 Te 4 or MnBi 6 Te 10 , weak reflections at half- L positions along the [0 0 L ] direction are observed for MnBi 4 Te 7 suggesting an in-plane ordered moment around 0.15 μ B / Mn . The ordering temperature, T N , is 13 K for MnBi 4 Te 7 and 11 K for MnBi 6 Te 10 . The magnetic order is also manifested in the anisotropic magnetic properties. Furthermore, for both compounds, the interlayer coupling is weak and a spin-flip transition occurs when a magnetic field of around 1.6 kOe is applied along the c axis at 2 K. As observed in MnBi 2 Te 4 , when cooling across T N , no anomaly was observed in the temperature dependence of thermopower. On the other hand, critical scattering effects are observed in thermal conductivity although the effect is less pronounced than that in MnBi 2 Te 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Competing antiferromagnetic-ferromagnetic states in a d 7 Kitaev honeycomb magnet

The Kitaev model is a rare example of an analytically solvable and physically instantiable Hamiltonian yielding a topological quantum spin liquid ground state. Here we report signatures of Kitaev spin liquid physics in the honeycomb magnet Li 3 Co 2 SbO 6 , built of high-spin d 7 (Co 2+ ) ions, in contrast to the more typical low-spin d 5 electron configurations in the presence of large spin-orbit coupling. Neutron powder diffraction measurements, heat capacity, and magnetization studies support the development of a long-range antiferromagnetic order space group of C C 2/m, below T N = 11K at μ 0 H = 0T. The magnetic entropy recovered between T = 2 and 50 K is estimated to be 0.6Rln2, in good agreement with the value expected for systems close to a Kitaev quantum spin liquid state. The temperature-dependent magnetic order parameter demonstrates a β value of 0.19(3), consistent with XY anisotropy and in-plane ordering, with Ising-like interactions between layers. Further, we observe a spin-flop-driven crossover to ferromagnetic order with space group of C2/m under an applied magnetic field of μ 0 H ≈ 0.7T at T = 2K. Magnetic structure analysis demonstrates these magnetic states are competing at finite applied magnetic fields even below the spin-flop transition. Both the d 7 compass model, a quantitative comparison of the specific heat of Li 3 Co 2 SbO 6 , and related honeycomb cobaltates to the anisotropic Kitaev model further support proximity to a Kitaev spin liquid state. Furthermore, this material demonstrates the rich playground of high-spin d 7 systems for spin liquid candidates and complements known d 5 Ir- and Ru-based materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Slow spin dynamics and quantum tunneling of magnetization in the dipolar antiferromagnet DyScO 3

Here, we present a comprehensive study of static and dynamic magnetic properties in the Ising-like dipolar antiferromagnet (AFM) DyScO 3 by means of DC and AC magnetization measurements supported by classical Monte Carlo calculations. Our AC-susceptibility data show that the magnetic dynamics exhibit a clear crossover from an Arrhenius-like regime to quantum tunneling of magnetization (QTM) at T*=10K. Below T N =3.2K, DyScO 3 orders in an antiferromagnetic GxAy-type magnetic structure and the magnetization dynamics slow down to the minute timescale. The low-temperature magnetization curves exhibit complex hysteretic behavior, which depends strongly on the magnetic field sweep rate. We demonstrate that the low-field anomalies on the magnetization curve are related to the metamagnetic transition, while the hysteresis at higher fields is induced by a strong magnetocaloric effect. Our theoretical calculations, which take into account dipolar interaction between Dy 3+ moments, reproduce essential features of the magnetic behavior of DyScO 3 . We demonstrate that DyScO 3 represents a rare example of an inorganic compound, which exhibits QTM at a single-ion level and magnetic order due to classical dipolar interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spin-density-wave order controlled by uniaxial stress in CeAuSb 2

We report the tetragonal heavy-fermion compound CeAuSb 2 (space group P4/nmm ) exhibits incommensurate spin-density wave (SDW) order below T N ≈ 6.5 K with the propagation vector q A = (δ A , δ A , 1/2 ). The application of uniaxial stress along the [010] direction induces a sudden change in the resistivity ratio ρ a /ρ b at a compressive strain of ε ≈ - 0.5 %. Here we use neutron scattering to show that the uniaxial stress induces a first-order transition to a SDW state with a different propagation vector (0, δ B ,1/2) with δ B = 0.25.The magnetic structure of the new (B) phase consists of Ce layers with ordered moments alternating with layers with zero moment stacked along the c axis. The ordered layers have an up-up-down-down configuration along the b axis. This is an unusual situation in which the loss of spatial inversion in a metallic system is driven by the magnetic order. We argue that the change in SDW wave vector leads to Fermi-surface reconstruction and a concomitant change in the transport properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Insulating band gaps both below and above the Néel temperature in d -electron LaTi O 3 , LaV O 3 , SrMn O 3 , and LaMn O 3 perovskites as a symmetry-breaking event

Metal d-electron oxides having an odd number of electrons per cell should exhibit band degeneracy at the Fermi energy, making them, in band theory, formally metallic. In many cases, however, these are “false metals”, as evidenced by the observation that many ABO 3 oxide perovskites with a magnetic 3d B-atom are observed to be insulators both below and above the Néel temperature. These inconsistencies between experimental observation and expectation have historically been resolved by invoking degeneracy-breaking physics, based largely on -pure electron effects, such as strong interelectronic correlation for d-electron compounds (the Mott mechanism). Such explanations generally consider microscopic lattice or magnetic degrees of freedom (m-DOF) as largely passive spectators, not a cause of the formally metallic being an insulator. Yet, it has long been known that ABO 3 perovskites can manifest an arrangement of m-DOFs in the form of octahedral tilting, bond dimerization, Jahn-Teller distortions, and ordering of local magnetic moments. It appears reasonable that such structural and magnetic local degrees of freedom need to be allowed to compete with purely electronic strong correlation. To answer this question, we explored a range of d-electron oxide perovskites exemplified by the archetypes LaTiO 3 , LaVO 3 , SrMnO 3 , and LaMnO 3 with 1, 2, 3, or 4 d -electrons, respectively. Using a mean-field-like electronic structure method (here, density functional theory), we find that a combination of magnetic symmetry breaking with structural distortions can account for insulating band gaps in this series while at the same time correctly predicting for the control case an intrinsic paramagnetic metal in SrVO 3 as symmetry-breaking is insufficiently strong to remove the degeneracy. Finally, this indicates that calculating quantitatively local magnetic and positional symmetry-breaking motifs in unit cells that avoid averaging at the outset over the low symmetry motifs can provide consistent trends in a Mott transition without Mott U.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrical Interrogation of Thickness‐Dependent Multiferroic Phase Transitions in the 2D Antiferromagnetic Semiconductor NiI 2

Abstract 2D magnetic materials hold promise for quantum and spintronic applications. 2D antiferromagnetic materials are of particular interest due to their relative insensitivity to external magnetic fields and higher switching speeds compared to 2D ferromagnets. However, their lack of macroscopic magnetization impedes detection and control of antiferromagnetic order, thus motivating magneto‐electrical measurements for these purposes. Additionally, many 2D magnetic materials are ambient‐reactive and electrically insulating or highly resistive below their magnetic ordering temperatures, which imposes severe constraints on electronic device fabrication and characterization. Herein, these issues are overcome via a fabrication protocol that achieves electrically conductive devices from the ambient‐reactive 2D antiferromagnetic semiconductor NiI 2 . The resulting gate‐tunable transistors show band‐like electronic transport below the antiferromagnetic and multiferroic transition temperatures of NiI 2 , revealing a Hall mobility of 15 cm 2 V −1 s −1 at 1.7 K. These devices also allow direct electrical probing of the thickness‐dependent multiferroic phase transition temperature of NiI 2 from 59 K (bulk) to 28 K (monolayer).

2D magnets↗
DOE OSTI2024

Field-induced spin polarization in the lightly Cr-substituted layered antiferromagnet NiP S 3

Tuning magnetic properties in layered magnets is an important route to realize novel phenomenon related to two-dimensional (2D) magnetism. Recently, tuning antiferromagnetic (AFM) properties through substitution and intercalation techniques has been widely studied in MPX 3 compounds. Interesting phenomena, such as diverse AFM structures and even the signatures of ferrimagnetism, have been reported. However, long-range ferromagnetic (FM) ordering has remained elusive. Here, in this work, we explored the magnetic properties of the Cr-substituted NiP S 3 . We found that Cr substitution is extremely efficient in controlling spin orientation in NiP S 3 . Our study reveals a field-induced spin polarization in lightly (9%) Cr-substituted NiP S 3 , which is likely attributed to the attenuation of AFM interactions and magnetic anisotropy due to Cr doping. Our work provides a possible strategy to achieve FM phase in AFM MPX 3 , which could be useful for investigating 2D magnetism as well as potential device applications.

2-dimensional systems↗
DOE OSTI2023

The fast camera (Fastcam) imaging diagnostic systems on the DIII-D tokamak

Two camera systems are installed on the DIII-D tokamak at the toroidal positions of 90° (90° system) and 225° (225° system), respectively. The cameras have two types of relay optics, namely, a coherent optical fiber bundle and a periscope system. The periscope system provides absolute intensity calibration stability while sacrificing resolution (10 lp/mm), while the fiber system provides high resolution (16 lp/mm) while sacrificing calibration stability. The periscope is available only for the 90° system. The optics of the 225° system were designed for view stability, repeatability, and easy maintenance. The cameras are located inside optimized neutron, x ray and magnetic shielding in order to reduce electronics damage, reboots, and magnetic and neutron interference, increasing the overall system reliability. An automated filter wheel, providing remote filter change, allows for remote wavelength selection. A software suite automates camera acquisition and data storage, allowing for remote operation and reduced operator involvement. System metadata is used to streamline the data analysis workflow, particularly for intensity calibration. Here, the spatial calibration uses multiple observable wall features, resulting in a reconstruction accuracy ≤2 cm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1982

The thickness of the magnetopause current layer - ISEE 1 and 2 observations

ISEE 1 and 2 magnetometer data over the dayside magnetosphere are analyzed to present a global survey of the magnetopause thickness. It is shown that earlier magnetopause velocities have been somewhat underestimated, with results indicating constant rapid and irregular motion and velocities ranging from 10-80 km/s in 80% of the cases. The magnetopause thickness is found to be between 400-1000 km, with larger thicknesses also observed, and the thickness does not seem to depend on the orientation of the magnetosheath magnetic field, but does appear to be ordered by dipole magnetic latitude so that the magnetopause current sheet is thinnest near the magnetic equator, which suggests that reconnection is initiated in the equatorial regions rather than in the polar cusps.

Berchem, J.↗
DOE OSTI2020

Charge density modulation and defect ordering in the $Na_xMnBi_y$ magnetic semimetal

The I-Mn-V antiferromagnet, NaMnBi, develops a very large positive magnetoresistance (MR) up to 10 000% at 2 K and 9 T in crystals showing a semiconductor-to-metal transition (SMT). In the absence of an SMT, a modest (20%) MR is achieved. Here, we show that upon cooling below the magnetic transition, a spatial modulation appears giving rise to new Bragg peaks due to charge and defect ordering in a checkerboard pattern, with two kinds of modulation vectors, $q_1 = \left( \frac{2}{3}, 0, 1 \right)$ and $q_2 = \left( \frac{2}{3}, \frac{1}{3}, \frac {1}{2} \right)$. This constitutes a superlattice transition ($T_s$) that lowers the symmetry from the high-temperature centrosymmetric $P4/nmm$ to the noncentrosymmetric $P\overline{4}m2$. In crystals with a large MR, a close to room temperature $T_s$ is observed with $q_1$ appearing first, followed by $q_2$. In crystals with low MR, however, $T_s$ is much lower and only $q_1$ is observed. Finally, the charge modulation and spin fluctuations may both contribute to the enhancement of MR.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Introducing the monoclinic polymorph of the honeycomb magnet Na 2 Co 2 TeO 6

Recent theoretical studies have suggested that the low-energy Hamiltonian of honeycomb cobaltate systems could be dominated by anisotropic Kitaev interactions. Motivated by the theory, a honeycomb layered material Na 2 Co 2 TeO 6 with a hexagonal unit cell has been studied and found to exhibit antiferromagnetic (AFM) ordering at 27 K with two spin reorientation transitions at 15 and 5 K. Here we report a monoclinic polymorph of Na 2 Co 2 TeO 6 , also with honeycomb layered structure but with a single AFM transition at 9.6 K and without spin reorientation transitions at lower temperatures. Here, using neutron diffraction, we identify an in-plane zigzag AFM order in the ground state with the spins canted out of the honeycomb planes and ferromagnetically coupled between them. The zigzag order is suppressed by a magnetic field of 6T. The lower critical temperature and field, positive Curie-Weiss temperature, and out-of-plane canting of spins in the monoclinic Na 2 Co 2 TeO 6 suggest enhanced frustration in this polymorph compared to the hexagonal one.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Probing Phosphorus Solubility and Its Effect on Critical Temperature ( T c ) in the Helical Superconducting Magnet RbEuFe 4 As 4– x P x

RbEuFe 4 As 4 exhibits a rare combination of high-temperature superconductivity and noncollinear magnetism, originating from the FeAs and Eu layers, respectively. In order to fine-tune its superconducting and magnetic properties, we studied P-doped RbEuFe 4 As 4–x P x . To determine the value of x for which RbEuFe 4 As 4–x P x exists, members of the series have been synthesized in the form of relatively large-sized single crystals by a high-temperature flux growth technique using RbAs flux as well as polycrystalline powder by direct combination reactions between RbFe 2 As 2 and EuFe 2 As 2–x P x . The flux crystal growth reactions indicate that RbEuFe 4 As 4–x P x forms with the values of x ≤ 0.12, which is corroborated by the Rietveld refinement analysis on the products obtained from direct combination reactions. The solubility limit exists primarily due to the preferential site As(2) occupation by P in the RbEuFe 4 As 4 crystal structure. Finally, as x increases in RbEuFe 4 As 4–x P x , magnetization measurements reveal that the superconducting critical transition temperature (T c ) decreases, while the magnetic ordering temperature (T N ) remains almost unchanged in comparison to undoped RbEuFe 4 As 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Interface-Driven Chiral Magnetism in Ultrathin Metallic Ferromagnets: Towards Skyrmion Spintronics

Magnetic skyrmions are localized chiral magnetic textures in the form of nanoscale vortices or bubbles that are topologically protected from being ‘unwound’. Their topological nature gives rise to rich behaviors including ordered lattice formation, emergent electrodynamics and robust current-driven displacement at remarkably low current densities. However, magnetic skyrmions have so far been restricted to just a few materials and observed only at low temperatures, limiting the experimental accessibility and technological application of these unique topological objects. This project aimed to realize magnetic skyrmions at room temperature in a new class of engineered chiral ferromagnets that exploit broken mirror symmetry at interfaces to generate helical magnetic order. Ultrathin magnetic heterostructures were engineered and patterned into laterally-confined nanostructures in which skyrmions were stabilized, manipulated, and detected for the first time under ambient conditions. Static and dynamic properties were examined using advanced x-ray imaging to provide a fundamental understanding of topological magnetic phases. The interactions between magnetic skyrmions and electron charge and spin currents were studied to identify fundamental new physics and enable device applications. These experimental studies, supported by detailed modeling, will help launch a new subfield of skyrmion-based spintronics in which individual skyrmions can be used to encode, store, and transport information in high-performance, low power memory and logic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Stripe antiferromagnetic ground state of the ideal triangular lattice compound KErSe 2

Rare-earth triangular lattice materials have been proposed as a good platform for the investigation of frustrated magnetic ground states. KErSe 2 , with the delafossite structure, contains perfect two-dimensional Er 3 + triangular layers separated by potassium ions, realizing this ideal configuration and inviting study. In this study, we investigate the magnetism of KErSe 2 at millikelvin temperatures by heat capacity and neutron powder diffraction. Heat capacity results reveal a magnetic transition at 0.2 K in zero applied field. This long-range order is suppressed by an applied magnetic field of 0.5 T below 0.08 K. Neutron powder diffraction suggests that the zero-field magnetic structure orders with k = ( 1 2 , 0 , 1 2 ) in a stripe spin structure. Unexpectedly, Er is found to have a reduced moment of 3.06(1) μ B /Er in the ordered state, and diffuse magnetic scattering, which originates at higher temperatures, is found to persist in the ordered state, potentially indicating magnetic fluctuations. Neutron diffraction collected under an applied field shows a metamagnetic transition at ~ 0.5 T to ferromagnetic order with k = ( 0 , 0 , 0 ) and two possible structures, which are likely dependent on the applied field direction. The zero-field stripe spin structure can be explained by the anisotropic interactions or the first-, second-, and third-neighbor couplings in the antiferromagnetic triangular lattice.

2-dimensional systems↗
DOE OSTI2020

Spin-orbit exciton in a honeycomb lattice magnet CoTiO 3 : Revealing a link between magnetism in d - and f -electron systems

We carried out inelastic neutron scattering to study the spin-orbital (SO) exciton in a single crystal sample of CoTiO 3 as a function of temperature. CoTiO 3 is a honeycomb magnet with dominant XY-type magnetic interaction and an A-type antiferromagnetic order below T N ≈ 38 K. We found that the SO exciton becomes softer, but acquires a larger bandwidth in the paramagnetic phase, compared to that in the magnetically ordered phase. Moreover, an additional mode is only observed in the intermediate temperature range, as the sample is warmed up above the lowest accessible temperature below T N . Such an unusual temperature dependence observed in this material suggests that its ground states (an S eff = 1 2 doublet) and excited states multiplets are strongly coupled, and therefore cannot be treated independently, as often done in a pseudo-spin model. Furthermore, our observations can be explained by a multi-level theory within random phase approximation that explicitly takes into account both the ground and excited multiplets. The success of our theory, which is originally developed to explain temperature dependence of magnetic excitations in the rare-earth magnets, highlight the similarity between the magnetic excitations in rare-earth systems and those in transition metal systems with strong spin orbit coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Stability and magnetic behavior of exfoliable nanowire one-dimensional materials

Low-dimensional materials can display enhanced electronic, magnetic, and quantum properties. Here we use the topological scaling algorithm to identify all sufficiently metastable materials in the Materials Project database to identify bulk crystals with one-dimensional (1D) structural motifs: Five hundred fifty-one crystals that are within 50 meV atom –1 of the thermodynamic hull display 1D motifs, where 293 of these contain d-valence elements, which we focus on in this work. After exfoliating nanowires from 263 of these materials and calculating their thermodynamic stability using density functional theory, 103 nanowires meet per-atom and per-Ångström thermodynamic stability criteria. We illustrate for three nanowire systems that a variety of local minima can be present in these systems, demonstrating one case of a Peierls distortion. The wires display a broad diversity of electronic and magnetic properties of these nanowires, with 14 metals, 7 half-metals, and 82 semiconductors and insulators, and 41 nanowires displaying magnetic moments ranging from 0.1 to 5μ B per d-valence species when assuming ferromagnetic order. A subset of these chains are investigated for the impact of magnetic ordering, identifying 1D FeCl 3 to be most stable in an antiferromagnetic state. The electronic and magnetic properties of the identified 1D materials could enable applications in spintronic and quantum devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Anisotropic Melting of Frustrated Ising Antiferromagnets

Magnetic frustrations and dimensionality play an important role in determining the nature of the magnetic long-range order and how it melts at temperatures above the ordering transition T N . In this Letter, we use large-scale Monte Carlo simulations to study these phenomena in a class of frustrated Ising spin models in two spatial dimensions. Here we find that the melting of the magnetic long-range order into an isotropic gaslike paramagnet proceeds via an intermediate stage where the classical spins remain anisotropically correlated. This correlated paramagnet exists in a temperature range T N < T < T * , whose width increases as magnetic frustrations grow. This intermediate phase is typically characterized by short-range correlations; however, the two-dimensional nature of the model allows for an additional exotic feature—formation of an incommensurate liquidlike phase with algebraically decaying spin correlations. The two-stage melting of magnetic order is generic and pertinent to many frustrated quasi-2D magnets with large (essentially classical) spins.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Magnetic field effects in an octupolar quantum spin liquid candidate

Quantum spin liquid (QSL) is a disordered state of quantum-mechanically entangled spins commonly arising from frustrated magnetic dipolar interactions. However, QSL in some pyrochlore magnets can also come from frustrated magnetic octupolar interactions. Although the key signature for both dipolar and octupolar interaction-driven QSL is the presence of a spin excitation continuum (spinons) arising from the spin quantum number fractionalization, an external magnetic field-induced ferromagnetic order will transform the spinons into conventional spin waves in a dipolar QSL. By contrast, in an octupole QSL, the spin waves carry octupole moments that do not couple, in the leading order, to an external magnetic field or to neutron moments but will contribute to the field dependence of the heat capacity. Here, in this study, we use neutron scattering to show that the application of a large external magnetic field to Ce 2 Zr 2 O 7 , an octupolar QSL candidate, induces an Anderson-Higgs transition by condensing the spinons into a static ferromagnetic ordered state with octupolar spin waves invisible to neutrons but contributing to the heat capacity. Our theoretical calculations also provide a microscopic, qualitative understanding for the presence of octupole scattering at large wave vectors in Ce 2 Sn 2 O 7 pyrochlore, and its absence in Ce 2 Zr 2 O 7 . Therefore, our results identify Ce 2 Zr 2 O 7 as a strong candidate for an octupolar U(1) QSL, establishing that frustrated magnetic octupolar interactions are responsible for QSL properties in Ce-based pyrochlore magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗