Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Effect of elemental composition and size on electron confinement in self-assembled SiC quantum dots: A combinatorial approach

A high level of control over quantum dot (QD) properties such as size and composition during fabrication is required to precisely tune the eventual electronic properties of the QD. Nanoscale synthesis efforts and theoretical studies of electronic properties are traditionally treated quite separately. In this paper, a combinatorial approach has been taken to relate the process synthesis parameters and the electron confinement properties of the QDs. First, hybrid numerical calculations with different influx parameters for Si{sub 1-x}C{sub x} QDs were carried out to simulate the changes in carbon content x and size. Second, the ionization energy theory was applied to understand the electronic properties of Si{sub 1-x}C{sub x} QDs. Third, stoichiometric (x=0.5) silicon carbide QDs were grown by means of inductively coupled plasma-assisted rf magnetron sputtering. Finally, the effect of QD size and elemental composition were then incorporated in the ionization energy theory to explain the evolution of the Si{sub 1-x}C{sub x} photoluminescence spectra. These results are important for the development of deterministic synthesis approaches of self-assembled nanoscale quantum confinement structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic and structural properties of molybdenum thin films as determined by real-time spectroscopic ellipsometry

Real-time spectroscopic ellipsometry (RTSE) is shown to be an effective contactless probe of radio frequency magnetron sputtered molybdenum thin films used as the back electrode in chalcopyrite [Cu(In,Ga)Se{sub 2}] solar cells. A series of Mo thin films was sputtered onto soda-lime glass substrates at Ar pressures ranging from 4 to 20 mTorr. RTSE measurements reveal how Ar pressure affects the nucleation and growth mechanisms that influence the films' ultimate grain structure and properties. Determinations of the free electron relaxation times at optical frequencies reveal that higher pressures lead to a smaller average grain size and increased void volume fraction.

36 MATERIALS SCIENCE↗

Photoinduced current transient spectroscopy technique applied to the study of point defects in polycrystalline CdS thin films

CdS thin films of variable thickness (between 160 and 1200 nm) were prepared using rf magnetron sputtering. X-ray diffraction measurements showed that the films have hexagonal structure and that the crystallites are preferentially oriented with the <002> axis perpendicular to the substrate surface. The results of electrical conductivity measurements as a function of film thickness and of temperature provide evidence that the conductivity is controlled by a thermally activated mobility in the presence of an intergrain barrier. The room temperature barrier height phi decreases with the increase in film thickness. Values of phi between 0 and 0.25 eV were determined. Photoinduced current transient spectroscopy performed on five samples having different thicknesses showed the presence of 11 traps with activation energies in the range 0.08-1.06 eV; deeper traps being observed on thinner films. By comparison with literature results, seven traps are attributed to native defects and foreign impurities (mainly Cu, Au, and Ag). Four other traps, not previously observed, are attributed to residual defects. The observation that deeper traps are detected in samples with larger barrier heights has been discussed and interpreted in terms of the energy band profile near the grain boundary.

36 MATERIALS SCIENCE↗

Radiation damage to amorphous carbon thin films irradiated by multiple 46.9 nm laser shots below the single-shot damage threshold

High-surface-quality amorphous carbon (a-C) optical coatings with a thickness of 45 nm, deposited by magnetron sputtering on a silicon substrate, were irradiated by the focused beam of capillary-discharge Ne-like Ar extreme ultraviolet laser (CDL=capillary-discharge laser; XUV=extreme ultraviolet, i.e., wavelengths below 100 nm). The laser wavelength and pulse duration were 46.9 nm and 1.7 ns, respectively. The laser beam was focused onto the sample surface by a spherical Sc/Si multilayer mirror with a total reflectivity of about 30%. The laser pulse energy was varied from 0.4 to 40 muJ on the sample surface. The irradiation was carried out at five fluence levels between 0.1 and 10 J/cm{sup 2}, accumulating five different series of shots, i.e., 1, 5, 10, 20, and 40. The damage to the a-C thin layer was investigated by atomic force microscopy (AFM) and Nomarski differential interference contrast (DIC) optical microscopy. The dependence of the single-shot-damaged area on pulse energy makes it possible to determine a beam spot diameter in the focus. Its value was found to be equal to 23.3+-3.0 mum using AFM data, assuming the beam to have a Gaussian profile. Such a plot can also be used for a determination of single-shot damage threshold in a-C. A single-shot threshold value of 1.1 J/cm{sup 2} was found. Investigating the consequences of the multiple-shot exposure, it has been found that an accumulation of 10, 20, and 40 shots at a fluence of 0.5 J/cm{sup 2}, i.e., below the single-shot damage threshold, causes irreversible changes of thin a-C layers, which can be registered by both the AFM and the DIC microscopy. In the center of the damaged area, AFM shows a-C removal to a maximum depth of 0.3, 1.2, and 1.5 nm for 10-, 20- and 40-shot exposure, respectively. Raman microprobe analysis does not indicate any change in the structure of the remaining a-C material. The erosive behavior reported here contrasts with the material expansion observed earlier [L. Juha et al., Proc. SPIE 5917, 91 (2005)] on an a-C sample irradiated by a large number of femtosecond pulses of XUV high-order harmonics.

36 MATERIALS SCIENCE↗

Ion Beam Analysis of the Thermal Stability of Hydrogenated Diamond-Like Carbon Thin Films on Si Substrate

Unbalanced magnetron sputtering deposition of C-H films has been performed with various levels of negative substrate bias and with a fixed flow rate of hydrogen. Argon was used as a sputtering gas and formed the majority of the gas in the plasma. The effect of hydrogenation on the final concentration of trapped elements and their thermal stability with respect to hydrogen content is studied using ion beam analysis (IBA) techniques. The elemental concentrations of the films were measured in the films deposited on silicon substrates with a 2.5 MeV of H{sup +} beam, which is used to perform Rutherford Backscattering Spectrometry (RBS) and Non-Rutherford Backscattering spectrometry (NRBS) and with 16 MeV of O{sup 5+} beam, used to perform Elastic Recoil Detection Analysis (ERDA). Effect of bias on the thermal stability of trapped hydrogen in the films has been studied. As the films were heated in-situ in vacuum using a non-gassy button heater, hydrogen was found to be decreasing around 400 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic phases and structural properties in Co/Ru superlattices

We report studies by x-ray diffraction, ferromagnetic resonance (FMR), and x-ray magnetic circular dichroism (XMCD) in Co/Ru superlattices grown by magnetron sputtering. We studied the [Co(50 A)/Ru(t{sub Ru})]{sub 20} samples, which were deposited at room temperature on Si substrates with the Ru thicknesses, t{sub Ru}, varying between 9 and 33 A. The main and secondary uniform absorption modes, observed in the FMR spectra, are associated with the Co/Ru interfaces and the bulk Co regions, respectively. The main mode becomes more intense than the secondary one for increasing t{sub Ru}. This is attributed to the roughness and/or atomic interdiffusion, which leads, with increasing t{sub Ru}, to an increasing volume of Co/Ru interfacial regions and a decreasing volume of pure Co regions. The XMCD measurements provide Co spin magnetic moments lower than the bulk Co value, confirming the presence of a Co magnetic region with a lower local effective magnetization attributed to the Co/Ru interfaces.

36 MATERIALS SCIENCE↗

Aluminum doped zinc oxide for organic photovoltaics

Aluminum doped zinc oxide (AZO) was grown via magnetron sputtering as a low-cost alternative to indium tin oxide (ITO) for organic photovoltaics (OPVs). Postdeposition ozone treatment resulted in devices with lower series resistance, increased open-circuit voltage, and power conversion efficiency double that of devices fabricated on untreated AZO. Furthermore, cells fabricated using ozone treated AZO and standard ITO displayed comparable performance.

36 MATERIALS SCIENCE↗

Metal--Insulator Transition in Bi{sub 2}Sr{sub 2}Cu{sub 1}O{sub 6+d}(Bi-2201) Thin Films

We have studied the influence of disorder induced by oxygen on the normal state resistivity of under doped Bi{sub 2}Sr{sub 2}Cu{sub 1}O{sub 6+d}(Bi-2201) thin films, deposited in situ onto heated SrTiO{sub 3}(100) substrates by using DC magnetron sputtering for an off-stoichiometric target. The compositions and structural characterization for the deposited films were carried by (EDX), (XPS) and X-ray diffraction measurements. The effect of partial oxygen pressure in the sputtering gas on the metal-insulator transition are presented.

36 MATERIALS SCIENCE↗

Magnetic properties of Fe-rich Fe-V alloy films

Polycrystalline Fe{sub 100-x}V{sub x} with x=0 to 14 at.% V films on a glass substrate were made by the dc magnetron sputtering method. The deposition temperature was 250 deg. C. The magnetic properties, i.e., saturation magnetization 4piM{sub s}, bulk-pinning field for a domain wall H{sub cw}, coercive force H{sub c}, initial permeability mu{sub i}, maximum permeability mu{sub m}, saturation magnetostriction lambda{sub s}, and electrical property, such as the electrical resistivity rho of the Fe-V films, were measured. We find that 4piM{sub s} is a decreasing function of x, H{sub c}, and/or H{sub cw} has a minimum at xapprox =x{sub 0}=8 at. % V, mu{sub i}, mu{sub m}, and/or mu{sub c} has a maximum at x=x{sub 0}, lambda{sub s}approx =0 at x=x{sub 0}, and rho is an increasing function of x. These new magnetic results are consistent with earlier magnetostriction measurements [Jen and Chen, J. Magn. Magn. Mater. 204, 165 (1999)] and theoretical calculations [Ostanin, Staunton, and Razee, Phys. Rev. B 69, 064425 (2004)]. Moreover, all the magnetic features in the x dependence of H{sub c}, H{sub cw}, mu{sub i}, mu{sub m}, mu{sub c}, and lambda{sub s}, respectively, can be explained within the framework of the bulk-pinning (or surface-pinning) and the end-pinning (or nucleation) models. Briefly, the pinning model analysis of the magnetic hysteresis data confirms the inference that near zero lambda{sub s} implies maximal permeabilities and smallest H{sub c} and H{sub cw}. Among all the Fe-V films, the Fe{sub 92}V{sub 8} film has the optimal magnetic and electrical properties for application.

36 MATERIALS SCIENCE↗

Specular electron scattering at single-crystal Cu(001) surfaces

Epitaxial copper layers, 20 nm to 1.5-{mu}m-thick, were grown on MgO(001) by ultrahigh vacuum magnetron sputter deposition at 80 deg. C. In situ electrical resistivity measurements indicate partial specular scattering at the Cu vacuum interface with a Fuchs-Sondheimer scattering parameter p=0.6{+-}0.1. In situ deposition of 0.3 to 7.0-nm-thick Ta cap layers on the Cu surfaces leads to a resistivity increase, which is independent of the Ta thickness and is associated with a transition to completely diffuse surface scattering with p=0.0{+-}0.1. The diffuse scattering is attributed to a 'rough' electron potential at the Cu-Ta interface as well as to scattering into localized interface and surface states.

36 MATERIALS SCIENCE↗

Magnetic softness and high-frequency characteristics of Fe{sub 65}Co{sub 35}-O alloy films

The effects of oxygen concentration and film thickness were studied on the microstructural, electrical, and magnetic properties of Fe{sub 65}Co{sub 35}-O alloy films prepared by dc magnetron sputtering at room temperature. The films showed the best magnetic softness with a large saturation magnetization of 21.5 kG, low coercivities of 2.8 and 2.1 Oe in easy and hard axes, respectively, and a high resistivity of 2215 muOMEGA cm at an optimized condition of an oxygen gas flow ratio of 1.0% and a film thickness of 105 nm. Such an excellent magnetic softness can be attributed to grain refinement caused by the addition of very low dose of oxygen, which basically did not lead to the full formation of Fe and/or Co oxide phases with low saturation magnetizations. The microwave permeability measurement indicated that the addition of very low dose of oxygen could improve the response of real permeability to frequency. A high real permeability of 525 at frequency up to 1.2 GHz was obtained for the Fe{sub 65}Co{sub 35}-O films deposited at the optimized condition above.

36 MATERIALS SCIENCE↗

Temperature dependence of the optical properties of AlInN

Measurements of the temperature dependence of transmission have been carried out on AlInN thin films grown by reactive radio-frequency magnetron sputtering on (0001) sapphire substrates. By following a detailed procedure developed for analyzing the transmission spectra, we obtained more reliable data for the effects of temperature on the optical properties of AlInN. Two sets of temperature and photon-energy dependence of empirical formulas have been established for the absorption coefficient, bandgap, Urbach bandtail, and refractive index, which not only unify various experimental data reported in the literature but also provide a database of the optical properties of AlInN based on experimental results. It was found that the shift in the temperature dependence of the bandgap increases with the Al content and that the Urbach bandtail parameter is closely related to the structural characteristics of the AlInN thin films. These optical properties provide an experimental basis for further theoretical investigation and the design of AlInN-based devices.

36 MATERIALS SCIENCE↗

Charging effect and capacitance modulation of Ni-rich NiO thin film

In this letter, Ni-rich NiO thin film is deposited on p-type Si substrate by dc magnetron sputtering to form a metal-insulator-semiconductor structure. The charge trapping in the Ni nanocrystals (nc-Ni) embedded in NiO matrix induces a flatband voltage shift and capacitance modulation, which could be used for memory applications. The charging of nc-Ni depends on the voltage polarity, as well as the charging time and magnitude of gate voltage. The capacitance modulation can be described by an equivalent circuit model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhancement in ordering of Fe{sub 50}Pt{sub 50} film caused by Cr and Cu additives

A 100-nm-thick Fe{sub 50}Pt{sub 50} film with high coercivity was fabricated by magnetron sputtering. On introducing a Cr top/bottom layer, the ordering temperature (T{sub or}) of the film decreased considerably from 500 to 380 deg. C. On introducing both Cr top/bottom layer and a 0.2-nm-thick Cu interlayer, the T{sub or} decreased even further to 340 deg. C. During the annealing process, the number of Cr atoms diffused into the Fe{sub 50}Pt{sub 50} layer increased. This increased the Fe diffusivity, lowering the T{sub or} in the process. The diffusion of the additive and the effects of annealing were verified by selected-area electron diffraction observations and by investigating the temperature dependence of the magnetization. The superlattice structure of the ordered Fe{sub 50}Pt{sub 50} film containing Cr and Cu additives was confirmed by the transmission electronic microscopy. Because of the Cr and Cu additives, the average grain size in the ordered Fe{sub 50}Pt{sub 50} film increased slightly; however, the coercivity of the ordered Fe{sub 50}Pt{sub 50} film is improved considerably.

36 MATERIALS SCIENCE↗

Influence of annealing atmosphere on the magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} sandwiched nanocomposite films

The magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} nanocomposite films are studied by magnetic force microscopy and vibrating sample magnetometer. The films were fabricated by alternately depositing SiO{sub 2}, Fe, and SiO{sub 2} on Si substrates with magnetron sputtering followed by thermal annealing. It is found that the annealing atmosphere significantly influences the sample structure, composition, and magnetic properties. The samples annealed in forming gas show much better magnetic properties than those annealed in vacuum and in N{sub 2}. The saturation magnetization can reach 200 emu/g, fairly close to the value of bulk Fe, and the coercivity can reach 400 Oe, much higher than 10 Oe of the bulk Fe. X-ray photoelectron spectroscopic depth profile measurement was carried out to study the mechanism of the strong influence of annealing atmosphere. For the samples annealed in forming gas, Fe nanoparticles are mildly oxidized, forming thin shells of Fe{sub 2}O{sub 3} surrounding them, which is beneficial for maintaining the ferromagnetic behavior and enhancing the coercivity of nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Combinatorial investigation of (Ti{sub 1-x}Nb{sub x}){sub 2}AlC

We have synthesized thin films of (Ti{sub 1-x}Nb{sub x}){sub 2}AlC by combinatorial method on TiC (111) seed layers grown on c-axis sapphire (Al{sub 2}O{sub 3}) substrates at 900 deg. C using magnetron sputter. X-ray diffraction showed the films to be c-axis oriented and epitaxial, and films contained a minor secondary phase of (Ti,Nb)C, irrespective of stoichiometry. Most notably, Raman spectroscopy suggest a sizable increase in the elastic modulus in the Nb-rich region as compared to either of the end members.

36 MATERIALS SCIENCE↗

Electrical and optical properties of Sn doped CuInO{sub 2} thin films: Conducting atomic force microscopy and spectroscopic ellipsometry studies

Tin doped CuInO{sub 2} thin films deposited by rf magnetron sputtering technique show columnar structure with (006) preferred orientation. Conducting atomic force microscopy measurements show the presence of nanoconductivity regions when the current flow direction is along the in-plane InO{sub 6} layer and absence of conducting regions when the current direction is along O-Cu-O layers perpendicular to the film surface. The strong anisotropy observed in the electrical properties of tin doped samples is due to the preferred crystallite orientation and highly anisotropic delafossite structure. A large change in the electrical conductivity value and activation energy value in undoped films and tin doped samples has also been explained in terms of change in crystallite orientation on doping. Spectroscopic ellipsometry measurements have been used to determine the optical constant and dielectric function of CuInO{sub 2} and CuInO{sub 2}:Sn films and show a band gap value of 4.5 eV in tin doped samples due to removal of structural defects.

36 MATERIALS SCIENCE↗

Phase transitions and electrical behavior of lead-free (K{sub 0.50}Na{sub 0.50})NbO{sub 3} thin film

Lead-free (K{sub 0.50}Na{sub 0.50})NbO{sub 3} (KNN) thin films with a high degree of (100) preferred orientation were deposited on the SrRuO{sub 3}-buffered SrTiO{sub 3}(100) substrate by off-axis radio frequency magnetron sputtering. They possess lower phase transition temperatures (T{sub o-t}approx120 deg. C and T{sub c}approx310 deg. C), as compared to those of KNN bulk ceramic (T{sub o-t}approx190 deg. C and T{sub c}approx400 deg. C). They also demonstrate enhanced ferroelectric behavior (e.g., 2P{sub r}=24.1 muc/cm{sup 2}) and fatigue endurance, together with a lower dielectric loss (tan deltaapprox0.017) and a lower leakage current, as compared to the bulk ceramic counterpart. Oxygen vacancies are shown to be involved in the conduction of the KNN thin film.

36 MATERIALS SCIENCE↗