SEARCH · Engineering Papers

Results for “MACHINE LEARNING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Comparison of Supervised and Un-Supervised Machine Learning Algorithms for Threat Detection and Scintillator Performance for Radiation Portal Monitoring

Following the events of September 11, 2001, international border crossing have been equipped with radiation portal monitors (RPMs) to identify illicit radioactive material. Polyvinyl toluene (PVT) scintillators are commonly used due to their low cost and reasonable maintainability, however they offer low spectral resolution. Despite the fact that over twenty years has transpired since this event, radioisotopes are still typically identified by hand-crafted classification algorithms, e.g., total counts or energy windowing, and exhibit relatively poor performance in detecting threats at the low false alarm rates required to support the stream of commerce. While some improvement to performance has been realized via the use of supervised machine learning, these classification algorithms typically utilize simulations in lieu of real data due to the sparsity of data for one or more classes. Accordingly, the performance of these algorithms is somewhat less than optimal when examining experiments or simulations with model mismatch. Consequently, in this work, we examine the application of a number of unsupervised machine learning, anomaly detection based algorithms, to circumvent the inverse crime when analyzing spectroscopy data for RPMs. We also compare anomaly detection results with those obtained via the use of supervised classification detection ML algorithms when model mismatch is introduced between the simulated threat items utilized for training/testing. Finally, we compared the performance of the PVT scintillators to those obtained with higher resolution detectors using both anomaly detection and supervised classification algorithms.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

DOE OSTI2026

Development of an ab initio learned model of electron deposition range in deuterium-tritium plasmas through time-dependent density functional theory calculations and machine learning

Accurate hydrodynamic modeling for laser-direct-drive (LDD) inertial-confinement-fusion (ICF) relies on precise calculations of the electron thermal conduction in all target materials. The nonlocal stopping range of electrons in ICF plasmas directly influences thermal conduction; yet, no first principles model exists for the electron mean free path in the conduction-zone regime. This work utilized time-dependent stochastic density-functional theory (TD-sDFT) to calculate the electron stopping power in deuterium-tritium (DT) plasmas at (ρ, T) conditions relevant to the conduction zone and the compressed shell in ICF. Using a combination of our TD-sDFT data and already established analytical models, we developed and trained an artificial neural network to create a global model for the nonlocal electron deposition range, λ E . We compared our machine-learning (ML) based model for λ E to the currently-used modified-Lee-More model in LDD radiation-hydrodynamic codes, such as lilac, and saw an overall decrease in the deposition range. To understand the effects of λ E on LDD ICF implosion dynamics, we implemented the ML-based model into lilac; specifically, we looked at designs consistent with a current experiment on the OMEGA laser and for a newly designed LDD-ICF target for the future OMEGA-Next facility. In both cases, we saw an overall drop in predicted ablation pressure, peak areal density, and neutron yield due to the reduced thermal conduction (smaller λ E ) in DT plasmas. Comparisons with the experiment on OMEGA are also made.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Machine learning methods for probabilistic locked-mode predictors in tokamak plasmas

A rotating tokamak plasma can interact resonantly with the external helical magnetic perturbations, also known as error fields. This can lead to locking and then to disruptions. We leverage machine learning (ML) methods to predict the locking events. We use a coupled third-order nonlinear ordinary differential equation model to represent the interaction of the magnetic perturbation and the plasma rotation with the error field. This model is sufficient to describe qualitatively the locking and unlocking bifurcations. Here, we explore using ML algorithms with the simulation data and experimental data, focusing on the methods that can be used with sparse datasets. These methods lead to the possibility of the avoidance of locking in real-time operations. We describe the operational space in terms of two control parameters: the magnitude of the error field and the rotation frequency associated with the momentum source that maintains the plasma rotation. The outcomes are quan- tified by order parameters that completely characterize the state, whether locked or unlocked. We use unsupervised ML methods to classify locked/unlocked states and note the usefulness of a certain normalization of the order parameters. Three supervised ML classifiers are used in suite to estimate the probability of locking in the region of control parameter space with hysteresis, i.e., the set of control parameters for which both locked and unlocked states can exist. The results show that a neural network gives the best estimate of the locking probability. An analogy of the present locking model with the van der Waals equation of state is also provided.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

OrbNet Denali: A machine learning potential for biological and organic chemistry with semi-empirical cost and DFT accuracy

We present OrbNet Denali, a machine learning model for an electronic structure that is designed as a drop-in replacement for groundstate density functional theory (DFT) energy calculations. The model is a message-passing graph neural network that uses symmetryadapted atomic orbital features from a low-cost quantum calculation to predict the energy of a molecule. OrbNet Denali is trained on a vast dataset of 2.3 × 10 6 DFT calculations on molecules and geometries. This dataset covers the most common elements in biochemistry and organic chemistry (H, Li, B, C, N, O, F, Na, Mg, Si, P, S, Cl, K, Ca, Br, and I) and charged molecules. OrbNet Denali is demonstrated on several well-established benchmark datasets, and we find that it provides accuracy that is on par with modern DFT methods while offering a speedup of up to three orders of magnitude. For the GMTKN55 benchmark set, OrbNet Denali achieves WTMAD-1 and WTMAD-2 scores of 7.19 and 9.84, on par with modern DFT functionals. For several GMTKN55 subsets, which contain chemical problems that are not present in the training set, OrbNet Denali produces a mean absolute error comparable to those of DFT methods. For the Hutchison conformer benchmark set, OrbNet Denali has a median correlation coefficient of R 2 = 0.90 compared to the reference DLPNO-CCSD(T) calculation and R 2 = 0.97 compared to the method used to generate the training data (ωB97X-D3/def2- TZVP), exceeding the performance of any other method with a similar cost. Similarly, the model reaches chemical accuracy for noncovalent interactions in the S66x10 dataset. For torsional profiles, OrbNet Denali reproduces the torsion profiles of ωB97X-D3/def2-TZVP with an average mean absolute error of 0.12 kcal/mol for the potential energy surfaces of the diverse fragments in the TorsionNet500 dataset.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Unraveling the Correlation between Raman and Photoluminescence in Monolayer MoS 2 through Machine‐Learning Models

Abstract 2D transition metal dichalcogenides (TMDCs) with intense and tunable photoluminescence (PL) have opened up new opportunities for optoelectronic and photonic applications such as light‐emitting diodes, photodetectors, and single‐photon emitters. Among the standard characterization tools for 2D materials, Raman spectroscopy stands out as a fast and non‐destructive technique capable of probing material's crystallinity and perturbations such as doping and strain. However, a comprehensive understanding of the correlation between photoluminescence and Raman spectra in monolayer MoS 2 remains elusive due to its highly nonlinear nature. Here, the connections between PL signatures and Raman modes are systematically explored, providing comprehensive insights into the physical mechanisms correlating PL and Raman features. This study's analysis further disentangles the strain and doping contributions from the Raman spectra through machine‐learning models. First, a dense convolutional network (DenseNet) to predict PL maps by spatial Raman maps is deployed. Moreover, a gradient boosted trees model (XGBoost) with Shapley additive explanation (SHAP) to bridge the impact of individual Raman features in PL features is applied. Last, a support vector machine (SVM) to project PL features on Raman frequencies is adopted. This work may serve as a methodology for applying machine learning to characterizations of 2D materials.

Lu, Ang‐Yu↗

DOE OSTI2021

Expansion of Machine-Learning Method for Classifying Neutron Resonances

The understanding of astrophysics processes and the performance of nuclear reactors and other nuclear systems depend on a precise description of the neutron interaction cross sections for materials and nuclei present in these environments. At low neutron energies, these cross sections exhibit resonance structure represented by sharp enhancements when the neutron energy is sufficiently close to excited levels in a compound nucleus. Such resonances can be characterized by their quantum numbers relative to angular momenta, which are often deduced in an ad hoc and irreproducible manner from the shape of the cross sections. The correct assignment of the quantum numbers of neutron resonances is therefore of paramount importance. To address this we have developed a machine-learning method to automate the identification and correction of these spin assignments. The algorithm is trained from simulated data, generated from statistical properties of resonance data for a given nucleus, to mimic the errors found in real data. In this project we describe five independent approaches to further develop and expand the applicability of the machine-learning spin classifier: i) Feature impact; ii) Integration with the Atlas; iii) Training optimization; iv) Spacings systematics; and v) Validation with polarized data. The premises, methods, results, and future perspectives are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Efficient Anomaly Detection Driven By Different Machine Learning Architectures And Models

The rapid growth and ubiquitous adoption of the internet and cyber-physical systems (CPS) have fundamentally transformed modern communication, work, and human-system interactions. While networks now form the backbone of critical digital ecosystems, enabling seamless data transmission across diverse, interconnected systems, this increased connectivity also expands the attack surface, making real-time detection of network intrusions and anomalies a pressing challenge. Detecting unusual activities within network infrastructure requires advanced data traffic analysis to differentiate between legitimate and malicious interactions. Traditional approaches to network anomaly detectionâ??such as rule-based and signature-based systemsâ??often depend on predefined patterns to identify known anomalies, limiting their effectiveness against emerging, stealthy, or previously unseen threats. These conventional methods suffer from high false alarm rates and fail to adapt to the ever-evolving nature of network traffic, particularly in large-scale, decentralized environments where data volume, velocity, and variety are constantly increasing. This dissertation presents artificial intelligence (AI)-driven approaches to anomaly detection that leverage graphics processing unit (GPU)-enabled high-performance computing (HPC) platforms for processing massive network traffic data and monitoring the components of cyber-physical systems (CPS) for potentially hazardous conditions. The research advances several key contributions: (1) Designing efficient machine learning techniques for CPS condition monitoring and anomaly detection; (2) enabling federated learning (FL) frameworks that enable distributed detection while preserving data privacy and system resilience; (3) exploring graph-based methodologies combining graph neural networks (GNN) and graph machine learning (ML) approaches for the Internet of Things (IoT) and automotive network security, and (4) performing distributed edge computing optimizations that integrate FL with scalable technologies for reduced communication overhead. Through extensive experiments, these methodologies demonstrate that complex anomaly detection and condition monitoring tasks can be achieved while balancing computational efficiency and detection accuracy through fine-grained network information processing. The frameworks developed in this research establish a robust foundation for network anomaly detection, providing scalable, adaptive, and privacy-preserving solutions for safeguarding CPS and IoT networks in an increasingly interconnected digital landscape. The practical implications of these research findings are significant, as they can inform the development of next-generation network security systems and contribute to the protection of critical infrastructure against sophisticated cyber attacks.

Marfo, William↗

DOE OSTI2022

A Machine Learning Method for the Forensics Attribution of Separated Plutonium

Plutonium (Pu) source attribution would be a powerful tool to support nuclear nonproliferation efforts. This capability to find the source of a Pu sample would act as a deterrent to smuggling efforts, and also help regulatory agencies verify declared nuclear activities. Work at Texas A&M University yielded a nuclear forensics methodology, which is capable of determining separated Pu’s reactor of origin, fuel burnup, and the time since irradiation (TSI)—three parameters of interest. The methodology used a set of ten intra-element isotopic ratios found in separated Pu, which was compared to a library of isotopic ratio values produced using neutronics simulations for reactors of interest. By calculating the probability that unknown Pu sample’s isotopic ratio set matched a set in the library, the methodology could predict the three parameters of interest of the sample. One shortcoming of this methodology was an inability to correctly attribute spoofed Pu, where Pu sourced from two different reactors or two different fuel burnup levels are mixed. A new methodology to rectify this vulnerability using machine learning (ML) technique is developed, instead of the maximum likelihood calculation previously used and the results are satisfactory. The ML approach leverages the existing simulated data for training the algorithm, but use them efficiently by only using intra-element isotope ratios that contribute to the attribution one of the three parameters at a time. Previously, all isotope ratios were used to attribute all three parameters together. The new methodology attributes the Pu parameters in three steps, one for each parameter, rather than resolving all of the three parameters simultaneously like the previous maximum likelihood approach. First, a support vector machine classifier with a set of seven isotopic ratios finds the reactor of origin and a set of regression models trained using gaussian process predicts the burnup with a different set of seven isotopes. Finally, TSI is calculated analytically using decay equations. Thus far, the new methodology is capable of attributing pure Pu samples and has been validated using experimental data. The next step will to be augment the classifier training data set with spoofed Pu data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

Crustal Scale Travel Time Prediction with the SALSA3D Framework and Machine Learning

The SALSA3D project aims to improve our models used in travel time prediction. The current version uses tomographic modeling for propagation through the Earth’s mantle because of the large number (order of millions) of observations of seismic phases which primarily traverse the Earth’s mantle and the ability to pose the travel time problem as a set of linear equations. However, all seismic rays traverse the crust to reach receivers at the surface and therefore models of propagation through the crust are required. Therefore, the primary motivation for this study is to explore how to increase the scope of the SALSA3D project to phases which travel primarily through the crust. In this report, we evaluate new, machine learning based and physics-based methods to model these travel times for integration into the SALSA3D framework. Our results suggest that using our existing physics-based travel time tomography method is a viable approach for the regional to global scale, but better predictive capabilities can be achieved through a neural network trained on the region of interest for near-regional offsets. We suggest future iterations of SALSA3D should incorporate machine learning tools such as Physics-Informed Neural Networks or Bayesian Neural Networks.

58 GEOSCIENCES↗

DOE OSTI2021

Machine learning accelerated turbulence modeling of transient flashing jets

We report modeling the sudden depressurization of superheated liquids through nozzles is a challenge because the pressure drop causes rapid flash boiling of the liquid. The resulting jet usually demonstrates a wide range of structures, including ligaments and droplets, due to both mechanical and thermodynamic effects. As the simulation comprises increasingly numerous phenomena, the computational cost begins to increase. One way to moderate the additional cost is to use machine learning surrogacy for specific elements of the calculation. This study presents a machine learning-assisted computational fluid dynamics approach for simulating the atomization of flashing liquids accounting for distinct stages, from primary atomization to secondary breakup to small droplets using the Σ - Y model coupled with the homogeneous relaxation model. Notably, the models for thermodynamic non-equilibrium (HRM) and Σ - Y are coupled, for the first time, with a deep neural network that simulates the turbulence quantities, which are then used in the prediction of superheated liquid jet atomization. The data-driven component of this method is used for turbulence modeling, avoiding the solution of the two-equation turbulence model typically used for Reynolds-averaged Navier-Stokes simulations for these problems. Both the accuracy and speed of the hybrid approach are evaluated, demonstrating adequate accuracy and at least 25% faster computational fluid dynamics simulations than the traditional approach. This acceleration suggests that perhaps additional components of the calculation could be replaced for even further benefit. Published under an exclusive license by AIP Publishing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2026

Fostering Geothermal Machine Learning Success: Elevating Big Data Accessibility and Automated Data Standardization in the Geothermal Data Repository

The Department of Energy's (DOE) Geothermal Data Repository (GDR) has implemented improvements to both its data lakes and its data standards and automated data pipelines. The GDR data lakes have reduced storage and compute-related barriers to using large geothermal datasets, enabling these large datasets to be accessed by anyone with a modern computer and internet access. More recently, the GDR has been working to further reduce barriers through streamlining the data intake process, educating users on the process and requirements, and aiding users in accessing data from the data lakes. These improvements have augmented the quantity of datasets the GDR is able to accept into its data lakes and have enabled users who are new to cloud tools to access these datasets more easily, overall increasing the accessibility of big geothermal data for use in machine learning and other projects. In addition, the GDR now has built-in data standards and pipelines for drilling data, geospatial data, and distributed acoustic sensing (DAS) data. These standardization efforts aim to enhance the real-world applicability of geothermal machine learning outcomes by improving the quality of training data. Specifically, through standardizing high-value datasets, the GDR is reducing project-specific data curation requirements, thus allowing more time for actual research. By automating this process, the burden of standardization is lifted from the user, ultimately increasing the availability of standardized data.

15 GEOTHERMAL ENERGY↗

DOE OSTI2025

Fostering Geothermal Machine Learning Success: Elevating Big Data Accessibility and Automated Data Standardization in the Geothermal Data Repository

The Department of Energy's (DOE's) Geothermal Data Repository (GDR) has implemented improvements to both its data lakes and its data standards and automated data pipelines. The GDR data lakes have reduced storage and compute-related barriers to using large geothermal datasets, enabling these large datasets to be accessed by anyone with a modern computer and internet access. More recently, the GDR has been working to further reduce barriers through streamlining the data intake process, educating users on the process and requirements, and helping users access data from the data lakes. These improvements have augmented the quantity of datasets the GDR is able to accept into its data lakes and have enabled users who are new to cloud tools to access these datasets more easily, overall increasing the accessibility of big geothermal data for use in machine learning and other projects. In addition, the GDR now has built-in data standards and pipelines for drilling data, geospatial data, and distributed acoustic sensing (DAS) data. These standardization efforts aim to enhance the real-world applicability of geothermal machine learning outcomes by improving the quality of training data. Specifically, through standardizing high-value datasets, the GDR is reducing project-specific data curation requirements, thus allowing more time for actual research. By automating this process, the burden of standardization is lifted from the user, ultimately increasing the availability of standardized data. This paper provides an update on recent improvements made to the GDR's data lakes and automated data pipelines, including: (1) streamlining the data lake intake process, (2) better educating users on the process and requirements through a new data lakes page, (3) adding data lake direct access links to GDR data lake submission pages, (4) implementing a DAS data pipeline to convert DAS data uploaded in SEG-Y format to a standardized hierarchical data format v5 (HDF5), (5) extending this pipeline to encompass data in the GDR data lake, (6) adding metadata requirements for geospatial data, (7) making user interface/user experience (UX) enhancements to the data pipelines' documentation pages, and (8) improving the GDR's data standards and pipelines pages to better guide users in ensuring that their data is standardized by the GDR's automated data pipelines. 2024 Geothermal Resources Council. All rights reserved.

accessibility↗

DOE OSTI2024

Fostering Geothermal Machine Learning Success: Elevating Big Data Accessibility and Automated Data Standardization in the Geothermal Data Repository: Preprint

accessibility↗

DOE OSTI2020

Machine Learning Chemical Guidelines for Engineering Electronic Structures in Half-Heusler Thermoelectric Materials

Half-Heusler materials are strong candidates for thermoelectric applications due to their high weighted mobilities and power factors, which is known to be correlated to valley degeneracy in the electronic band structure. However, there are over 50 known semiconducting half-Heusler phases, and it is not clear how the chemical composition affects the electronic structure. While all the n-type electronic structures have their conduction band minimum at either the Γ - or X -point, there is more diversity in the p-type electronic structures, and the valence band maximum can be at either the Γ -, L -, or W -point. Here, we use high throughput computation and machine learning to compare the valence bands of known half-Heusler compounds and discover new chemical guidelines for promoting the highly degenerate W -point to the valence band maximum. We do this by constructing an “orbital phase diagram” to cluster the variety of electronic structures expressed by these phases into groups, based on the atomic orbitals that contribute most to their valence bands. Then, with the aid of machine learning, we develop new chemical rules that predict the location of the valence band maximum in each of the phases. These rules can be used to engineer band structures with band convergence and high valley degeneracy.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Machine learning assisted prediction of tungsten heavy alloy plasma facing component performance for fusion energy applications

Tungsten and tungsten heavy alloys (WHAs), known for their remarkably high hardness, durability, and corrosion resistance, play a critical role in the thriving development of nuclear fusion reactors in recent years. However, the exploration in tungsten alloys for the nuclear-related applications has been limited by the difficulty of manufacturing and the complexity of experiments to reproduce the environment of nuclear reaction. Therefore, this project aims to utilize nanoscale simulation methods such as density functional theory (DFT) and molecular dynamics (MD) with the help of machine learning techniques to not only understand the mechanisms of tungsten alloys but also allow us to computationally predict their mechanical behaviors under extreme environments. One critical problem of the application of WHAs in nuclear reactors is the surface melting. In the current design of the SPARC reactor, the WHA, W97Ni2.1Fe0.9 or W97NiFe, is chosen to be the first wall components to confine the plasma where the particles are fiercely moving and colliding into each other to create nuclear fusion reaction. This process will generate extremely high heat flux onto these WHA tiles, leaving high surface temperature that could possibly melt the surface of the WHA tiles, As illustrated in Fig. 1(a). a laser experiment previously done illustrates that a rough surface damage would be made after the surface melting where the matrix area mainly composed of nickel and iron as shown in Fig. 1(b), will first melt and then leave vacancies between these tungsten grains. Unfortunately, these kinds of roughness on the first-wall components could be deadly to the plasma inside a Tokmak reactor because the heat that is supposed to dissipate at a designed ratio through the tiles may in turn be excessively absorbed and accumulated on any uneven area of the surface, which will eventually make the whole nuclear reaction fail. In this project, we will introduce a machine learning potential, Allegro, based on DFT calculation and then build a MD model for W-Ni-Fe alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2022

In-process monitoring and prediction of droplet quality in droplet-on-demand liquid metal jetting additive manufacturing using machine learning

Abstract In droplet-on-demand liquid metal jetting (DoD-LMJ) additive manufacturing, complex physical interactions govern the droplet characteristics, such as size, velocity, and shape. These droplet characteristics, in turn, determine the functional quality of the printed parts. Hence, to ensure repeatable and reliable part quality it is necessary to monitor and control the droplet characteristics. Existing approaches for in-situ monitoring of droplet behavior in DoD-LMJ rely on high-speed imaging sensors. The resulting high volume of droplet images acquired is computationally demanding to analyze and hinders real-time control of the process. To overcome this challenge, the objective of this work is to use time series data acquired from an in-process millimeter-wave sensor for predicting the size, velocity, and shape characteristics of droplets in DoD-LMJ process. As opposed to high-speed imaging, this sensor produces data-efficient time series signatures that allows rapid, real-time process monitoring. We devise machine learning models that use the millimeter-wave sensor data to predict the droplet characteristics. Specifically, we developed multilayer perceptron-based non-linear autoregressive models to predict the size and velocity of droplets. Likewise, a supervised machine learning model was trained to classify the droplet shape using the frequency spectrum information contained in the millimeter-wave sensor signatures. High-speed imaging data served as ground truth for model training and validation. These models captured the droplet characteristics with a statistical fidelity exceeding 90%, and vastly outperformed conventional statistical modeling approaches. Thus, this work achieves a practically viable sensing approach for real-time quality monitoring of the DoD-LMJ process, in lieu of the existing data-intensive image-based techniques.

Gaikwad, Aniruddha (ORCID:0000000285642621)↗

DOE OSTI2025

GMFOLD: Subgraph matching for high-throughput DNA-aptamer secondary structure classification and machine learning interpretability

Aptamers are oligonucleotide receptors that bind to their targets with high affinity. Here, we consider aptamers comprised of single-stranded DNA that undergo target-binding-induced conformational changes, giving rise to unique secondary and tertiary structures. Given a specific aptamer primary sequence, there are well-established computational tools (notably mfold) to predict the secondary structure via free energy minimization algorithms. While mfold generates secondary structures for individual sequences, there is a need for a high-throughput process whereby thousands of DNA structures can be predicted in real-time for use in an interactive setting, when combined with aptamer selections that generate candidate pools that are too large to be experimentally interrogated. We developed a new Python code for high-throughput aptamer secondary structure determination (GMfold). GMfold uses subgraph matching methods to group aptamer candidates by secondary structure similarities. We also improve an open-source code, SeqFold, to incorporate subgraph matching concepts. We represent each secondary structure as a lowest-energy bipartite subgraph matching of the DNA graph to itself. These new tools enable thousands of DNA sequences to be compared based on their secondary structures, using machine-learning algorithms. This process is advantageous when analyzing sequences that arise from aptamer selections via systematic evolution of ligands by exponential enrichment (SELEX). This work is a building block for future machine-learning-informed DNA-aptamer selection processes to identify aptamers with improved target affinity and selectivity and advance aptamer biosensors and therapeutics.

Aptamer↗

DOE OSTI2025

Machine learning for domain transfer between simulated and experimental 2D X-ray diffraction patterns using generative adversarial networks

X-ray diffraction (XRD) is a well-established technique for analyzing materials at an atomic level. Dynamic compression experiments (DCE), in which materials are subject to extreme pressures, can provide fundamental understanding to pressure-induced phase transitions and compression of the crystal lattice. The analysis of XRD patterns from highly compressed samples is non-trivial given the sparsity of data, high experimental costs, and the fact that the data is often marred with X-ray background and other artifacts. While accurate computational frameworks exist, they solve the forward problem—from structures and orientations to XRD patterns. Solving the inverse problem for 2D experimental diffraction patterns is currently a complex manual process of matching and comparing experimentally observed patterns to computationally generated ones. Machine learning is a promising tool for automating the matching process but often requires data-intensive architectures. Here, in this study, we use a CycleGAN to translate the domain of limited experimental data to a domain in which there is readily available simulated data. This domain shift allows data-intensive machine learning models that have only been trained on simulated XRD patterns to be used in the analysis of experiments.

Brozak, Samantha Jean [Sandia National Laboratorie↗