Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Large Eddy Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Assessment of Low-Altitude Atmospheric Turbulence Models for Aircraft Aeroelasticity

We investigate the dynamic aeroelastic response of large but slow aircraft in low-altitude atmospheric turbulence. To this end, three turbulence models of increasing fidelity, namely, the one-dimensional von Kármán model, the two-dimensional Kaimal model and full three-dimensional wind fields extracted from large-eddy simulations (LES) are used to simulate ambient turbulence near the ground. Load calculations and flight trajectory predictions are conducted for a representative high-aspect-ratio wing aircraft, using a fully coupled nonlinear flight dynamics/aeroelastic model, when it operates in background atmospheric turbulence generated by the aforementioned models. Comparison of load envelopes and spectral content, on vehicles of varying flexibility, shows strong dependency between the selected turbulence model and aircraft aeroelastic response (e.g. 58% difference in the predicted magnitude of the wing root bending moment between LES and von Kármán models). This is mainly due to the presence of large flow structures at low altitudes that have comparable dimensions to the vehicle, and which despite the relatively small wind speeds within the Earth boundary layer, result in overall high load events for slow-moving vehicles. Results show that one-dimensional models that do not capture those effects provide fairly non-conservative load estimates and are unsuitable for very flexible airframe design.

atmospheric turbulence↗

Planetary Boundary Layer Simulation Using TASS

Boundary conditions to an existing large-eddy simulation model have been changed in order to simulate turbulence in the atmospheric boundary layer. Several options are now available, including the use of a surface energy balance. In addition, we compare convective boundary layer simulations with the Wangara and Minnesota field experiments as well as with other model results. We find excellent agreement of modelled mean profiles of wind and temperature with observations and good agreement for velocity variances. Neutral boundary simulation results are compared with theory and with previously used models. Agreement with theory is reasonable, while agreement with previous models is excellent.

Schowalter, David G.↗

Relationships between Immersion Freezing and Crystal Habit for Arctic Mixed-Phase Clouds—A Numerical Study

Abstract The number concentration of ice particles in Arctic mixed-phase clouds is a major controlling factor of cloud lifetime. The relationships between ice nucleation mode and ice crystal habit development are not yet constrained by observations. This study uses a habit-predicting microphysical scheme within a 3D large-eddy simulation model to evaluate the relationship between immersion freezing and ice habit in a simulated Arctic mixed-phase cloud case. Three immersion freezing parameterizations are considered: a volume-dependent freezing scheme (VF), a parameterization limited to activated droplets (C-AC), and a parameterization limited to coarse aerosol particles (C-CM). Both C-AC and C-CM are based on classical nucleation theory. The freezing rate with VF is found to be greater in downdraft regions than in updraft regions due to the downdraft having a higher number concentration of large droplets. The C-AC cases show active freezing of small droplets near cloud top, whereas in the C-CM cases, mainly the 8–32- μ m-sized droplets freeze in updraft regions near the cloud base. Because the initial crystal size is assumed to affect the axis ratio of hexagonal plates, the VF cases produce crystals with larger axis ratios, resulting in smaller mode radii than the C-AC cases. In all cases, irregular polycrystals dominate near cloud top and a band-like structure develops within the cloud, which qualitatively agrees with previous observations. In the VF and C-CM cases, unactivated large droplets arising from coarse-mode aerosol particles contributed significantly to the freezing rate, producing an important influence on crystal habit.

54 ENVIRONMENTAL SCIENCES↗

Wind Fields in Category 1–3 Tropical Cyclones Are Not Fully Represented in Wind Turbine Design Standards

Abstract Offshore wind energy deployment in the U.S. is expected to increase in the years to come, with proposed wind farm sites located in regions with high risk for tropical cyclones. Yet, the wind turbine design criteria outlined by the International Electrotechnical Commission for extreme events may not account for wind field characteristics unique to tropical cyclones. To evaluate if current design standards capture the extreme conditions of these storms, we perform idealized large‐eddy simulations of three tropical cyclones (one Category 1, one Category 2, and one Category 3 storms) using the Weather Research and Forecasting model. Wind conditions near the eyewall of Cat‐1, Cat‐2, and Cat‐3 storms can exceed current design standards for offshore wind turbines. Winds at 90 m can be faster than outlined in the design criteria for Class I and Class T turbines for 50‐year recurrence periods. Wind speed shear across the turbine rotor layer is also larger than assumed in design specifications. Moreover, vertical variations in wind direction across the turbine rotor layer are large for tropical cyclones of all intensity levels, suggesting design standards should include veer, which can amplify loads in wind turbines. The existence of hurricane wind field characteristics that are not represented in design standards does not imply that damage or failure will certainly occur. Engineering safety factors incorporated in the design of the turbine's blades and structural components may prevent damage from occurring.

17 WIND ENERGY↗

Simulating flame lift-off characteristics of diesel and biodiesel fuels using detailed chemical-kinetic mechanisms and LES turbulence model.

Combustion in direct-injection diesel engines occurs in a lifted, turbulent diffusion flame mode. Numerous studies indicate that the combustion and emissions in such engines are strongly influenced by the lifted flame characteristics, which are in turn determined by fuel and air mixing in the upstream region of the lifted flame, and consequently by the liquid breakup and spray development processes. From a numerical standpoint, these spray combustion processes depend heavily on the choice of underlying spray, combustion, and turbulence models. The present numerical study investigates the influence of different chemical kinetic mechanisms for diesel and biodiesel fuels, as well as Reynolds-averaged Navier-Stokes (RANS) and large eddy simulation (LES) turbulence models on predicting flame lift-off lengths (LOLs) and ignition delays. Specifically, two chemical kinetic mechanisms for n-heptane (NHPT) and three for biodiesel surrogates are investigated. In addition, the RNG k-{epsilon} (RANS) model is compared to the Smagorinsky based LES turbulence model. Using adaptive grid resolution, minimum grid sizes of 250 {micro}m and 125 {micro}m were obtained for the RANS and LES cases respectively. Validations of these models were performed against experimental data from Sandia National Laboratories in a constant volume combustion chamber. Ignition delay and flame lift-off validations were performed at different ambient temperature conditions. The LES model predicts lower ignition delays and qualitatively better flame structures compared to the RNG k-{epsilon} model. The use of realistic chemistry and a ternary surrogate mixture, which consists of methyl decanoate, methyl 9-decenoate, and NHPT, results in better predicted LOLs and ignition delays. For diesel fuel though, only marginal improvements are observed by using larger size mechanisms. However, these improved predictions come at a significant increase in computational cost.

33 ADVANCED PROPULSION SYSTEMS↗

BEYOND MIXING-LENGTH THEORY: A STEP TOWARD 321D

We examine the physical basis for algorithms to replace mixing-length theory (MLT) in stellar evolutionary computations. Our 321D procedure is based on numerical solutions of the Navier–Stokes equations. These implicit large eddy simulations (ILES) are three-dimensional (3D), time-dependent, and turbulent, including the Kolmogorov cascade. We use the Reynolds-averaged Navier–Stokes (RANS) formulation to make concise the 3D simulation data, and use the 3D simulations to give closure for the RANS equations. We further analyze this data set with a simple analytical model, which is non-local and time-dependent, and which contains both MLT and the Lorenz convective roll as particular subsets of solutions. A characteristic length (the damping length) again emerges in the simulations; it is determined by an observed balance between (1) the large-scale driving, and (2) small-scale damping. The nature of mixing and convective boundaries is analyzed, including dynamic, thermal and compositional effects, and compared to a simple model. We find that (1) braking regions (boundary layers in which mixing occurs) automatically appear beyond the edges of convection as defined by the Schwarzschild criterion, (2) dynamic (non-local) terms imply a non-zero turbulent kinetic energy flux (unlike MLT), (3) the effects of composition gradients on flow can be comparable to thermal effects, and (4) convective boundaries in neutrino-cooled stages differ in nature from those in photon-cooled stages (different Péclet numbers). The algorithms are based upon ILES solutions to the Navier–Stokes equations, so that, unlike MLT, they do not require any calibration to astronomical systems in order to predict stellar properties. Implications for solar abundances, helioseismology, asteroseismology, nucleosynthesis yields, supernova progenitors and core collapse are indicated.

79 ASTRONOMY AND ASTROPHYSICS↗

Enrichment methods for inflow turbulence generation in the atmospheric boundary layer

Here, we investigate the feasibility of introducing synthetic turbulence into finite-domain large-eddy simulations (LES) of the wind plant operating environment. This effort is motivated by the need for a robust mesoscale-to-microscale coupling strategy in which a microscale (wind plant) simulation is driven by mesoscale data without any resolved microscale turbulence. A neutrally stratified atmospheric boundary layer was simulated in an LES with 10-m grid spacing. We show how such a fully developed turbulence field may be reproduced with spectral enrichment starting from an under-resolved coarse LES field (with 20-m and 40-m grid spacing). The velocity spectra of the under-resolved fields are enriched by superimposing a fluctuating velocity field calculated by two turbulence simulators: TurbSim and Gabor Kinematic Simulation. Both forms of enrichment accurately simulated the autospectra of all three velocity components at high wavenumbers, with agreement between the enriched fields and the full-resolution LES observed at 400 m from the inflow boundary. In contrast, the spectra of the unenriched fields reached the same fully developed state at four times the downstream distance.

17 WIND ENERGY↗

A simple three-component mixing problem for the evaluation of a new reaction rate model

A simple computational mixing problem is presented which can be utilized to assess the behavior of Reynolds-averaged reaction rate models in a problem with temporally varying mixedness. In this problem, three mixing components are homogeneously distributed but initially separated in a triply periodic domain. Further, these components are initialized within a Taylor–Green-like velocity field, which creates a mixing history evolving from the so-called “no-mix limit” to a well-mixed state. Large-eddy simulation results from this problem in configurations involving both premixed and nonpremixed reactants are then compared with zero-dimensional Reynolds-averaged Navier–Stokes results utilizing a new model for multicomponent reacting mixtures. The new model is shown to appropriately respect the no-mix limit and outperforms an earlier model (Morgan, 2022), particularly at early times when components are near the no-mix limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Neutrino Trapping and Out-of-Equilibrium Effects in Binary Neutron-Star Merger Remnants

We study out-of-thermodynamic-equilibrium effects in neutron-star mergers with 3D general-relativistic neutrino-radiation large-eddy simulations. During mergers, the cores of the neutron stars remain cold (T ~ a few MeV) and out of thermodynamic equilibrium with trapped neutrinos originating from the hot collisional interface between the stars. However, within ~2 to 3 ms matter and neutrinos reach equilibrium everywhere in the remnant massive neutron star. Furthermore, our results show that dissipative effects, such as bulk viscosity, if present, are only active for a short window of time after the merger.

79 ASTRONOMY AND ASTROPHYSICS↗

Prediction of Turbulent Temperature Fluctuations in Hot Jets

Large-eddy simulations were used to investigate turbulent temperature fluctuations and turbulent heat flux in hot jets. A high-resolution finite-difference Navier-Stokes solver, WRLES, was used to compute the flow from a 2-inch round nozzle. Several different flow conditions, consisting of different jet Mach numbers and temperature ratios, were examined. Predictions of mean and fluctuating velocities were compared to previously obtained particle image velocimetry data. Predictions of mean and fluctuating temperature were compared to new data obtained using Raman spectroscopy. Based on the good agreement with experimental data for the individual quantities, the combined quantity turbulent heat flux was examined.

large-eddy simulations↗

Prediction of Turbulent Temperature Fluctuations in Hot Jets

Large-eddy simulations were used to investigate turbulent temperature fluctuations and turbulent heat flux in hot jets. A high-resolution finite-difference Navier-Stokes solver, WRLES, was used to compute the flow from a 2-inch round nozzle. Several different flow conditions, consisting of different jet Mach numbers and temperature ratios, were examined. Predictions of mean and fluctuating velocities were compared to previously obtained particle image velocimetry data. Predictions of mean and fluctuating temperature were compared to new data obtained using Raman spectroscopy. Based on the good agreement with experimental data for the individual quantities, the combined quantity turbulent heat flux was examined.

hot jets↗

Enhancing Turbulent Mixing and Microphysical Uniformity in a Tall Convection‐Cloud Chamber Through Idealized Heterogeneity of Boundaries

A large convection cloud chamber has been proposed for exploring aerosol–cloud–drizzle interactions under well‐controlled turbulent conditions. Recent theoretical and numerical studies suggest that a convection cloud chamber with two heated and two cooled sidewalls can significantly enhance the liquid water content and thus benefit drizzle initiation. However, a chamber with such a sidewall configuration develops stable stratification and extremely weak turbulence therein. In this study, we conduct large‐eddy simulations of a tall convection chamber with five different sidewall configurations consisting of alternating warm and cold patches. For each configuration, the total surface area of warm patches equals that of cold patches, resulting in the same expected cloud‐free supersaturation based on a flux budget model. Results show that changing the sidewall configuration, while keeping all other factors constant, can substantially enhance turbulent mixing and improve the uniformity of thermodynamic and cloud microphysical properties in the bulk region of the chamber. In addition, turbulence strength is positively correlated with liquid water content and negatively correlated with cloud droplet number concentration, consistent with theoretical predictions. Our results highlight the advantage of building a large cloud chamber using modular patches with individually controllable temperature and humidity to achieve well‐mixed conditions.

54 ENVIRONMENTAL SCIENCES↗

Wall-modeled LES of Turbulent Flow Over a Two-dimensional Gaussian Bump

We perform wall-modeled large eddy simulations (WMLES) of turbulent flow over a nominally two-dimensional Gaussian-shaped bump geometry to assess its performance in the accelerating and separation regions of the flow. The flow conditions are based on high-fidelity numerical simulation of Uzun & Malik (AIAA Journal 2022). The oncoming flow Mach number is 0.2, with the bump length-based Reynolds number (ReL) of 2 million. In our previous study, while WMLES with the constant coefficient Vreman subgrid scale model and equilibrium wall model performed satisfactorily at lower ReL = 1 million, it failed to predict flow separation at the higher Re, contrary to the experimental observations. We investigate the sensitivity of WMLES to different subgrid scale models, wall models, and grid resolution and topology on flow separation by comparing with available data.

Computational Fluid Dynamics↗

Uncertainty quantification in LES of channel flow

Here, in this paper, we present a Bayesian framework for estimating joint densities for large eddy simulation (LES) sub-grid scale model parameters based on canonical forced isotropic turbulence direct numerical simulation (DNS) data. The framework accounts for noise in the independent variables, and we present alternative formulations for accounting for discrepancies between model and data. To generate probability densities for flow characteristics, posterior densities for sub-grid scale model parameters are propagated forward through LES of channel flow and compared with DNS data. Synthesis of the calibration and prediction results demonstrates that model parameters have an explicit filter width dependence and are highly correlated. Discrepancies between DNS and calibrated LES results point to additional model form inadequacies that need to be accounted for.

97 MATHEMATICS AND COMPUTING↗

Prediction of Turbulent Temperature Fluctuations in Hot Jets

Large-eddy simulations (LES) were used to investigate turbulent temperature fluctuations and turbulent heat flux in hot jets. A high-resolution finite-difference Navier-Stokes solver was used to compute the flow from a 2-inch round nozzle. Three different flow conditions of varying jet Mach numbers and temperature ratios were examined. The LES results showed that the temperature field behaves similar to the velocity field, but with a more rapidly spreading mixing layer. Predictions of mean, mu-bar(sub i), and fluctuating, mu'(sub i), velocities were compared to particle image velocimetry data. Predictions of mean, T-bar, and fluctuating, T', temperature were compared to data obtained using Rayleigh scattering and Raman spectroscopy. Very good agreement with experimental data was demonstrated for the mean and fluctuating velocities. The LES correctly predicts the behavior of the turbulent temperature field, but over-predicts the levels of the fluctuations. The turbulent heat flux was examined and compared to Reynolds-averaged Navier-Stokes (RANS) results. The LES and RANS simulations produced very similar results for the radial heat flux. However, the axial heat flux obtained from the LES differed significantly from the RANS result in both structure and magnitude, indicating that the gradient diffusion type model in RANS is inadequate. Finally, the LES data was used to compute the turbulent Prandtl number and verify that a constant value of 0.7 used in the RANS models is a reasonable assumption.

hot jets↗

CFD modeling of debris melting phenomena during late phase Candu 6 severe accident

The objective of this paper was to study the phase change of the debris formed on the Candu 6 calandria bottom in a postulated accident sequence. The molten pool and crust formation were studied employing the Ansys-Fluent code. The 3D model using Large Eddy Simulation (LES) predicts the conjugate, radiative and convective heat transfer inside and from the corium pool. LES simulations require a very fine grid to capture the crust formation and the free convection flow. This aspect (fine mesh requirement) correlated with the long transient has imposed the use of a slice from the 3D calandria geometry in order not to exceed the computing resources. The preliminary results include heat transfer coefficients, temperature profiles and heat fluxes through calandria wall. From the safety point of view it is very important to maintain a heat flux through the wall below the CHF assuring the integrity of the calandria vessel. This can be achieved by proper cooling of the tank water which contains the vessel. Also, transient duration can be estimated being important in developing guidelines for severe accidents management. The debris physical structure and material properties have large uncertainties in the temperature range of interest. Thus, further sensitivity studies should be carried out in order to better understand the influence of these parameters on this complex phenomenon. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

FAST.Farm Response to Varying Wind Inflow and Discretization

FAST.Farm is a newly developed multiphysics, midfidelity engineering tool that can be used to predict turbine power and structural loads of wind turbines in a wind farm. Previous studies have shown the similarities and differences between FAST.Farm and large-eddy simulations (LES) using the same LES-precursor-generated ambient wind inflow. The ability to generate ambient wind inflow using a synthetic turbulence engineering model (e.g., TurbSim or the Mann model) has recently been integrated into FAST.Farm to potentially enable more computationally efficient usage of the tool. This work aims to: 1) compare FAST.Farm simulations using LES-generated inflow to those using synthetically generated inflow from TurbSim, and 2) establish guidelines by which TurbSim-generated inflow should be generated for wind farm analysis. It was found that properly setting spatial coherence parameters for the transverse wind velocity components is necessary to accurately predict wake meandering. It is shown that TurbSim-generated inflow can be used in FAST.Farm to accurately predict thrust, power, speed, and torque for waked and unwaked turbines; wake meandering behavior across different atmospheric conditions; and averaged wake-deficit advection and evolution effects.

17 WIND ENERGY↗

FAST.Farm Response to Varying Wind Inflow Techniques: Preprint

FAST.Farm is a newly developed multiphysics, midfidelity engineering tool that can be used to predict turbine power and structural loads of wind turbines in a wind farm. Previous studies have shown the similarities and differences between FAST.Farm and large-eddy simulations (LES) using the same LES-precursor-generated ambient wind inflow. The ability to generate ambient wind inflow using a synthetic turbulence engineering model (e.g., TurbSim or the Mann model) has recently been integrated into FAST.Farm to potentially enable more computationally efficient usage of the tool. This work aims to: 1) compare FAST.Farm simulations using LES-generated inflow to those using synthetically generated inflow from TurbSim, and 2) establish guidelines by which TurbSim-generated inflow should be generated for wind farm analysis. It was found that properly setting spatial coherence parameters for the transverse wind velocity components is necessary to accurately predict wake meandering. It is shown that TurbSim-generated inflow can be used in FAST.Farm to accurately predict thrust, power, speed, and torque for waked and unwaked turbines; wake meandering behavior across different atmospheric conditions; and averaged wake-deficit advection and evolution effects.

17 WIND ENERGY↗