Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEAD OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Optical and structural analysis of lead bismuth silicate glasses

Glasses having compositions 20PbO(79.5-x)Bi{sub 2}O{sub 3}xSiO{sub 2} (x = 10,30,50) doped with 0.5 mole% of Nd{sup 3+} ions were prepared by melt quench technique. The spectroscopic properties of the glasses were investigated using optical absorption and fluorescence spectra. The structural investigations of these glasses were carried out by recording the IR spectra. The variation of {Omega}{sub 2} with Bi{sub 2}O{sub 3} content has been attributed to changes in the asymmetry of the ligand field at the rare earth ion site and to the changes in the rare earth oxygen covalency. Heavy metal oxide glasses have been used as potential candidate in solid state laser, solar concentrators, optical detector, optical fiber and fluorescent display devices.

36 MATERIALS SCIENCE↗

The characterisation of lead-free thick-film resistors on different low temperature Co-fired ceramics substrates

Graphical abstract: Display Omitted Highlights: ► Lead free thick film resistors based on ruthenium oxide were developed. ► The compatibility of resistors with different LTCC substrates was evaluated. ► The interactions between resistors and glassy LTCC substrates were not detected. ► Electrical characteristics were comparable with commercial thick film resistors. -- Abstract: Lead-free thick-film resistors were synthesised and investigated. The thick-film resistor materials with nominal sheet resistivities from 50 ohm/sq. to 50 kohm/sq. were prepared using combinations of two lead-free glasses with reflow temperatures at 940 °C and 1240 °C, respectively, and two RuO{sub 2} powders (fine-grained and coarse-grained RuO{sub 2}). The thick-film resistors were printed and fired on alumina and on low temperature co-fired ceramics substrates and fired at 850 °C and 950 °C. The fired resistors were investigated by X-ray powder diffraction, by scanning electron microscopy and by energy dispersive X-ray analysis. The sheet resistivities, temperature coefficients of resistivity, gauge factors and noise indices were measured.

36 MATERIALS SCIENCE↗

Oxidative stress induces mitochondrial fragmentation in frataxin-deficient cells

Highlights: Black-Right-Pointing-Pointer Yeast frataxin-deficiency leads to increased proportion of fragmented mitochondria. Black-Right-Pointing-Pointer Oxidative stress induces complete mitochondrial fragmentation in {Delta}yfh1 cells. Black-Right-Pointing-Pointer Oxidative stress increases mitochondrial fragmentation in patient fibroblasts. Black-Right-Pointing-Pointer Inhibition of mitochondrial fission in {Delta}yfh1 induces oxidative stress resistance. -- Abstract: Friedreich ataxia (FA) is the most common recessive neurodegenerative disease. It is caused by deficiency in mitochondrial frataxin, which participates in iron-sulfur cluster assembly. Yeast cells lacking frataxin ({Delta}yfh1 mutant) showed an increased proportion of fragmented mitochondria compared to wild-type. In addition, oxidative stress induced complete fragmentation of mitochondria in {Delta}yfh1 cells. Genetically controlled inhibition of mitochondrial fission in these cells led to increased resistance to oxidative stress. Here we present evidence that in yeast frataxin-deficiency interferes with mitochondrial dynamics, which might therefore be relevant for the pathophysiology of FA.

60 APPLIED LIFE SCIENCES↗

Dielectric and piezoelectric properties of Bi{sub 2}O{sub 3} added (Pb,Ca,Sr)(Ti,Mn,Sb)O{sub 3} ceramics sintered at low temperature

In this study, in order to develop low temperature sintering ceramics for a thickness mode multilayer piezoelectric transformer, (Pb,Ca,Sr)(Ti,Mn,Sb)O{sub 3} ceramics were fabricated using Na{sub 2}CO{sub 3}, Li{sub 2}CO{sub 3}, MnO{sub 2}, and Bi{sub 2}O{sub 3} as sintering aids at 870, 900, and 930 deg. C. Their respective dielectric and piezoelectric properties were investigated according to the amount of Bi{sub 2}O{sub 3} addition. At the sintering temperature of 900 deg. C, the optimum value was shown for the density of 6.94 g/cm{sup 3}, thickness vibration mode electromechanical coupling factor (henceforth, k{sub t}) of 0.497, thickness vibration mode mechanical quality factor (henceforth, Q{sub mt}) of 3162, and dielectric constant (henceforth, {epsilon}{sub r}) of 209 for thickness mode multilayer piezoelectric transformer application.

36 MATERIALS SCIENCE↗

Redox Pathways for HCOOH Decomposition over CeO2 Surfaces

The reaction of HCOOH, the simplest C-1 carboxylic acid, has been studied on oxidized (CeO{sub 2}) and reduced cerium oxide (CeO{sub x}) thin films. HCOOH has been proposed as an important C1 precursor to the formation of CO{sub 2} and H{sub 2} in the water-gas-shift (WGS) reaction, in which ceria is also used as a stable support rich in oxygen. The HCOOH is observed to adsorb by way of a formate intermediate species (HCOO{sup -}) through the dissociation of the acidic H over both CeO{sub 2} (Ce{sup 4+}) and CeO{sub x} (Ce{sup 4+}/Ce{sup 3+}) surfaces. On the fully oxidized CeO{sub 2} surface, this H species reacts with surface O and desorbs as H{sub 2}O when the temperature is <300 K. In addition to water, temperature programmed desorption spectra indicate the evolution of CO{sub 2} and H{sub 2} between 350 and 400 K followed by CO desorption in two regimes at 450 and 525 K. On reduced ceria, only CO and H{sub 2} were produced between 450 and 600 K. The reaction of HCOOH with ceria therefore leads to both the reduction of the oxide, through the formation of H{sub 2}O and CO{sub 2}, and oxidation of the oxide, through decomposition to H{sub 2} and CO, depending on the initial state of the ceria. C K-edge near-edge X-ray absorption fine structure and soft X-ray photoelectron spectroscopy indicate that formate and -OH were the only surface intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Interaction of Aqueous Iodine Species with Humic Acid Studied by I and C K-Edge X-ray Absorption Spectroscopy

Iodine-129 is one of three key risk drivers at several US Department of Energy waste management sites. Natural organic matter (NOM) is thought to play important roles in the immobilization of aqueous iodide (I – ) and iodate (IO 3 – ) in the environment, but molecular interactions between NOM and iodine species are poorly understood. In this work, we investigated iodine and carbon speciation in three humic acid (HA)-I systems using I K-edge XANES and EXAFS and C K-edge XANES spectroscopy: (1) I – in the presence of laccase (an oxidase enzyme) and a mediator, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) in a pH 4 buffer, (2) I– in the presence of lactoperoxidase (LPO) and H 2 O 2 in a pH 7 buffer, and (3) IO 3 – in a pH 3 groundwater. Both oxidase and peroxidase systems could oxidize I – to I 2 or hypoiodide (HOI) leading to organo-I formation. However, the laccase-ABTS mediator was the most effective and enhanced I – uptake by HA up to 13.5 mg/g, compared to 1.9 mg/g for the LPO–H 2 O 2 . IO 3 – was abiotically reduced to I 2 or HOI leading to an organo-I formation. Pathways for HA iodination include covalent modification of aromatic-type rings by I 2 / HOI or iodine incorporation into newly formed benzoquinone species arising from the oxidation of phenolic C species. Our study improves our molecular-level understanding of NOM–iodine interactions and stresses the important role that mediators may play in the enzymatic reactions between iodine and NOM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate electronic and chemical properties of 3d transition metal oxides using a calculated linear response U and a DFT + U(V) method

We validate the usage of the calculated, linear response Hubbard U for evaluating accurate electronic and chemical properties of bulk 3d transition metal oxides. We find calculated values of U lead to improved band gaps. For the evaluation of accurate reaction energies, we first identify and eliminate contributions to the reaction energies of bulk systems due only to changes in U and construct a thermodynamic cycle that references the total energies of unique U systems to a common point using a DFT + U(V ) method, which we recast from a recently introduced DFT + U(R) method for molecular systems. We then introduce a semi-empirical method based on weighted DFT/DFT + U cohesive energies to calculate bulk oxidation energies of transition metal oxides using density functional theory and linear response calculated U values. We validate this method by calculating 14 reactions energies involving V, Cr, Mn, Fe, and Co oxides. We find up to an 85% reduction of the mean average error (MAE) compared to energies calculated with the Perdew-Burke-Ernzerhof functional. When our method is compared with DFT + U with empirically derived U values and the HSE06 hybrid functional, we find up to 65% and 39% reductions in the MAE, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating the Adhesion Force of Lunar Regolith Particulates on Air Plasma Sprayed Alumina Coatings

Ceramic materials, often used to protect components due to their high strength, and wear resistance, have added benefits of being lightweight and providing multifunctional properties. They are, therefore, significant to provide durability and support during long-duration missions to the moon’s surface for rovers, landers, robotic systems, habitats, and many other components. Materials such as aluminum oxide with high mechanical strength and hardness can help to improve the durability of structures used in space exploration. Devices used for space exploration require the use of materials with the ability to withstand exposure to extreme environments. Lunar regolith is a constituent with the ability to adhere electrostatically and damage the components used to perform these missions due to adhesion of lunar dust projectiles that can cause delamination on surfaces, which may not be physically visible. The particulates of lunar dust are classified as corrosive material, leading to the degradation of structures. Aluminum oxide presents excellent resistance to different types of wear due to its high strength and hardness. Air plasma sprayed (APS) aluminum oxide coatings have demonstrated the potential to protect the surface to which they are applied. However, the parameters of roughness and porosity of the coatings need to be considered to establish if they can protect the components from extreme environments. Considering the electrostatic forces that the components are exposed to, the adhesion between the lunar regolith and the surface of the components needs to be investigated. In this work, the adhesion forces of lunar dust simulants with an average size of 30 𝜇m are investigated considering the roughness of the surface of the APS aluminum oxide. The centrifugal technique utilized here offers the advantage of establishing the adhesion force between particles with different shapes on smooth or rough surfaces. The simulants were deposited on the surface of APS aluminum oxide using an aerosolization technique to achieve a monolayer coating in three different locations across the specimen to determine the increments in adhesion force at the centrifuge. The roughness of the APS aluminum oxide was determined to be 2.257 𝜇m. The specimen was tested under an incremental centrifugal speed from 100 rpm to 3000 rpm for 20 seconds. Low magnification microscopy images were collected to cover a larger surface area of the test coating. The adhesion force was measured considering the distance from the centrifugal axis and the rotational speed. Due to the coating roughness, and the distance from the centrifugal axis, the results demonstrated a larger adhesion force in locations closer to the centrifugal axis. Smaller particles were entrapped within the roughness of the coating, and a stronger adhesion force was measured. In order to continue designing wear-resistant coating for structural protection in space missions, press-on experiments using a centrifuge will be performed. Future experiments will allow us to determine the design parameters for APS aluminum oxide coating to protect the structures from harsh space environments.

Perla Latorre-Suarez↗

Oxidation of SiC Fiber-Reinforced SiC Matrix Composites with a BN Interphase

SiC-fiber reinforced SiC matrix composites with a BN interphase were oxidized in reduced oxygen partial pressures of oxygen to simulate the environment for hypersonic vehicle leading edge applications. The constituent fibers as well as composite coupons were oxidized in oxygen partial pressures ranging from 1000 ppm O2 to 5% O2 balance argon. Exposure temperatures ranged from 816 C to 1353 C (1500 F to 2450 F). The oxidation kinetics of the coated fibers were monitored by thermogravimetric analysis (TGA). An initial rapid transient weight gain was observed followed by parabolic kinetics. Possible mechanisms for the transient oxidation are discussed. One edge of the composite coupon seal coat was ground off to simulate damage to the composite which allowed oxygen ingress to the interior of the composite. Oxidation kinetics of the coupons were characterized by scanning electron microscopy since the weight changes were minimal. It was found that sealing of the coupon edge by silica formation occurred. Differences in the amount and morphology of the sealing silica as a function of time, temperature and oxygen partial pressure are discussed. Implications for use of these materials for hypersonic vehicle leading edge materials are summarized.

Opila, Elizabeth↗

Electronic structures and ferromagnetism of SnO{sub 2} (rutile) doped with double-impurities: First-principles calculations

The electronic and magnetic properties of double-impurities-doped SnO{sub 2} (rutile) are explored using first-principles calculations within the generalized gradient approximation to examine their potential use as spintronic system. Calculations are performed for double impurities (M1 and M2) from M1 = Cr, and M2 = Mn, and Re. The origins of ferromagnetism are shown to be different in the two cases. For Sn{sub 1-2x}Cr{sub x}Mn{sub x}O2, the hybridization between Cr-3d and O-2p results in Cr becoming ferromagnetic with a magnetic moment of about 5.0 μ{sub B} per supercell. The Cr-and Mn-doped SnO{sub 2} system exhibits half-metallic ferromagnetism. The strong ferromagnetic couplings between local magnetic moments can be attributed to p-d hybridization. In contrast, in (Cr, Re) codoped TiO{sub 2}, the local magnetic moments of the impurities and their oxidation states agree with the charge transfer between Cr and Re, which would lead to the ferromagnetic through the double-exchange mechanism in transition metal oxides. Since there are two possible couplings between the impurities, we studied both configurations (ferromagnetic and antiferromagnetic (AF)) for double-impurities-doped SnO{sub 2}. Our calculations show that a ferromagnetic alignment of the spins is energetically always more stable than simple AF arrangements, which makes these materials possible candidates for spin injection in spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sol-gel synthesis of high-quality SrRuO{sub 3} thin film electrodes suppressing the formation of detrimental RuO{sub 2} and the dielectric properties of integrated lead lanthanum zirconate titanate films.

A facile solution chemistry is demonstrated to fabricate high-quality polycrystalline strontium ruthenium oxide (SrRuO{sub 3}) thin film electrodes on silicon substrates suppressing the formation of undesired ruthenium oxide (RuO{sub 2}) for the deposition of dielectric and ferroelectric materials like lead lanthanum zirconate titanate (PLZT). The robust, highly crystalline SrRuO{sub 3} film fabrication process does not favor the formation of RuO{sub 2} because of molecular level modification of the precursors possessing analogous melting points, yielding homogeneous films. This chemistry is further understood and complemented by kinetic and thermodynamic analysis of the DTA data under nonisothermal conditions, with which the activation energies to form RuO{sub 2} and SrRuO{sub 3} were calculated to be 156 {+-} 17 and 96 {+-} 10 kJ/mol, respectively. The room-temperature resistivity of the SrRuO{sub 3} film was measured to be 850 {+-} 50 {mu}{Omega} cm on silicon (100) substrates. The dielectric properties of sol-gel-derived PLZT thin film capacitors on polycrystalline SrRuO{sub 3} electrodes were also measured to illustrate the high quality of the formed SrRuO{sub 3} bottom electrode. These results have broad implications for the expanded use of these conductive oxide electrodes in many applications that require low thermal budgets. The PLZT (8/52/48) films exhibited well-defined hysteresis loops with remanent polarization of {approx}10.5 {micro}C/cm{sup 2}, dielectric constant of >1450, dielectric loss of <0.06, and leakage current density of {approx}3.8 x 10{sup -8} A/cm{sup 2}. These dielectric properties are similar to those of PLZT on platinized silicon, indicating the high quality of the bottom conductive oxide layer. In addition, the PLZT capacitors were essentially fatigue free for >1 x 10{sup 9} cycles when deposited over an oxide electrode.

36 MATERIALS SCIENCE↗

Chamber studies of OH + dimethyl sulfoxide and dimethyl disulfide: insights into the dimethyl sulfide oxidation mechanism

Abstract. The oxidation of dimethyl sulfide (DMS) in the marine atmosphere represents an important natural source of non-sea-salt sulfate aerosol, but the chemical mechanisms underlying this process remain uncertain. While recent studies have focused on the role of the peroxy radical isomerization channel in DMS oxidation, this work revisits the impact of the other channels (OH addition and OH abstraction followed by bimolecular RO2 reaction) on aerosol formation from DMS. Due to the presence of common intermediate species, the oxidation of dimethyl sulfoxide (DMSO) and dimethyl disulfide (DMDS) can shed light on these two DMS reaction channels; they are also both atmospherically relevant species in their own right. This work examines the OH oxidation of DMSO and DMDS, using chamber experiments monitored by chemical ionization mass spectrometry and aerosol mass spectrometry to study the full range of sulfur-containing products across a range of NO concentrations. The oxidation of both compounds is found to lead to rapid aerosol formation (which does not involve the intermediate formation of SO2), with a substantial fraction (14 %–47 % S yield for DMSO and 5 %–21 % for DMDS) of reacted sulfur ending up in the particle phase and the highest yields observed under elevated NO conditions. Aerosol is observed to consist mainly of sulfate, methanesulfonic acid, and methanesulfinic acid. In the gas phase, the NOx dependence of several products, including SO2 and S2-containing organosulfur species, suggest reaction pathways not included in current mechanisms. Based on the commonalities with the DMS oxidation mechanism, DMSO and DMDS results are used to reconstruct DMS aerosol yields; these reconstructions roughly match DMS aerosol yield measurements from the literature but differ in composition, underscoring remaining uncertainties in sulfur chemistry. This work indicates that both the abstraction and addition channels contribute to rapid aerosol formation from DMS and highlights the need for more study into the fate of small sulfur radical intermediates (e.g., CH3S, CH3SO2, and CH3SO3) that are thought to play central roles in the DMS oxidation mechanism.

Goss, Matthew B. (ORCID:0000000226885463)↗

Stability of bimetallic Pd-Zn catalysts for the steam reforming of methanol

ZnO-supported palladium-based catalysts have been shown in recent years to be both active and selective towards the steam reforming of methanol, although they are still considered to be less active than traditional copper-based catalysts. The activity of PdZn catalysts can be significantly improved by supporting them on alumina. Here we show that the Pd/ZnO/Al2O3 catalysts have better long-term stability when compared with Cu/ZnO based catalysts, and that they are also stable under redox cycling. The Pd/ZnO/Al2O3 catalysts can be easily regenerated by oxidation in air at 420 ºC followed by re-exposure to reaction conditions at 250 ºC, while the Cu/ZnO based catalysts do not recover their activity after oxidation. Reduction at high temperatures (>420 ºC) leads to Zn loss from the alloy nanoparticle surface resulting in a reduced catalyst activity. However, even after such extreme treatment, the catalyst activity is regained with time on stream under reaction conditions alone, leading to highly stable catalysts. These findings illustrate that the nanoparticle surface is dynamic and changes drastically depending on the environment, and that elevated reduction temperatures are not necessary to achieve high CO2 selectivity.

10 SYNTHETIC FUELS↗

Interfacial charge transfer and its impact on transport properties of LaNiO 3 /LaFeO 3 superlattices

Charge transfer or redistribution at oxide heterointerfaces is a critical phenomenon, often leading to remarkable properties such as two-dimensional electron gas and interfacial ferromagnetism. Despite studies on LaNiO 3 /LaFeO 3 superlattices and heterostructures, the direction and magnitude of the charge transfer remain debated, with some suggesting no charge transfer due to the high stability of Fe 3+ (3d 5 ). Here, we synthesized a series of epitaxial LaNiO 3 /LaFeO 3 superlattices and demonstrated partial (up to ~0.5 e - /interface unit cell) charge transfer from Fe to Ni near the interface, supported by density functional theory simulations and spectroscopic evidence of changes in Ni and Fe oxidation states. The electron transfer from LaFeO 3 to LaNiO 3 and the subsequent rearrangement of the Fe 3d band create an unexpected metallic ground state within the LaFeO 3 layer, strongly influencing the in-plane transport properties across the superlattice. Moreover, we establish a direct correlation between interfacial charge transfer and in-plane electrical transport properties, providing insights for designing functional oxide heterostructures with emerging properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Soil Microbial Sources of Nitrous Acid and their Effect on Carbon-Nitrogen Cycle Interactions

Descriptions of soil emissions of reactive nitrogen (NO y ) in climate models are underdeveloped or non-existent, due to the fact that details of the mechanisms leading to nitrous acid (HONO) and nitrogen di-oxide (NO 2 ) formation in soil are lacking. This represents a major gap in our understanding of a significant land-atmosphere interaction that prevents us from scaling these processes from the laboratory scale to the ecosystem and global scales. There is a critical need to include these mechanisms into climate models since NO y controls the oxidative capacity of the atmosphere and the lifetime of greenhouse gases and the rate of secondary aerosol formation that directly and indirectly affect climate. The first objective of this proposal is to conduct laboratory and field measurements of NO y fluxes from diverse soil types and determine the mechanism of biogenic NO y formation. The working hypothesis based on preliminary data is that soil HONO and NO 2 is ultimately derived from ammonia-oxidizing archaea (AOA) and bacteria (AOB) that are widespread, but whose abundance varies across ecosystems. In the case of NO 2 , reactive oxygen species derived from iron-containing minerals and heterotrophic bacteria drive NO-to-NO 2 conversion. The approach is to link soil fluxes of HONO and NO 2 to AOA, AOB, and other heterotrophs using a combination of laboratory and field experiments, isotopic analysis, and molecular techniques to address how variability in land surfaces and edaphic properties impact emissions. In addition, we will determine the effect of HONO and NO 2 on nitrogen immobilization and the photo-oxidative capacity of soil. The working hypothesis is that HONO uptake in soil will be a source of nitrosonium and hydroxyl radical that will lead to thermal- and photodegradation of soil organic matter to CO 2 and CO, and the incorporation of N in soil organic matter. We will use surface-sensitive mass spectrometry techniques and gas phase detection to study N-immobilization in soil and subsequent enhancements in reactivity that lead to decomposition of organic matter. The results will be used to reduce the uncertainty in projections from the Community Earth System Model (CESM) stemming from inaccurate representations of soil NO y emissions. The proposed research is significant because, in addition to demonstrating new mechanisms of NO y formation and loss, it will be a crucial first step towards modeling the land-atmosphere exchange of HONO and NO 2 in the CESM. Improved model treatment of land-air exchange of NO y is key for understanding feedbacks between human activity and climate, and addressing societal concerns about the fate of N and C emitted to the atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Development of high-emittance scales on thoriated nickel-chromium-aluminum-base alloys

The surface regions of a DSNiCrAl alloy have been doped, by a pack diffusion process, with small amounts of Mn, Fe, or Co, and the effect of these dopants on the total normal emissivity of the scales produced by subsequent high temperature oxidation has been measured. While all three elements lead to a modest increase in emissivity, (up to 23% greater than the undoped alloy) only the change caused by manganese is thermally stable. However, this increased emissivity is within 85 percent of that of TDNiCr oxidized to form a chromia scale. The maganese-doped alloy is some 50 percent weaker than undoped DSNiCrAl after the doping treatment, and approximately 30 percent weaker after oxidation.

Seltzer, M. S.↗

An Experimental Investigation of the Performance of the Nitrogen Tetroxide-Hydrazine System in the Oxidizer-Rich and Fuel-Rich Regions

The results of an experimental program directed toward determining some of the operational characteristics of the nitrogen tetroxide-hydrazine propellant system under oxidizer-rich and fuel-rich conditions are reported. Data are presented for the mixture-ratio ranges of 0 to 0.55 at a nominal chamber pressure of 300 psia and characteristic chamber length of 250 in., and at mixture ratios of 5.9 to 13.0 at nominal chamber pressures of 400 and 500 psia and characteristic chamber lengths of 100 and 3900 in. The relationship of the actual performance data obtained in each region with those predicted from thermochemical performance calculations is presented. From this comparison, it is concluded that in neither region are equilibrium conditions obtained and that utilization of performance data obtained from assumptions of equilibrium will lead to serious errors. In the oxidizer-rich region investigated, temperatures considerably below those predicted occur throughout the range of mixture ratios investigated because of the lack of exothermic dissociation of the nitrogen oxides. In the fuel-rich region, below a mixture ratio of 0.3, temperatures considerably higher than those predicted occur because of the lack of endothermic dissociation of ammonia.

Chilenski, J. J.↗