Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERSTITIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Elimination of carbon vacancies in 4H-SiC employing thermodynamic equilibrium conditions at moderate temperatures

The carbon vacancy (V{sub C}) is a major point defect in high-purity 4H-SiC epitaxial layers limiting the minority charge carrier lifetime. In layers grown by chemical vapor deposition techniques, the V{sub C} concentration is typically in the range of 10{sup 12 }cm{sup −3}, and after device processing at temperatures approaching 2000 °C, it can be enhanced by several orders of magnitude. In the present study, both as-grown layers and a high-temperature processed one have been annealed at 1500 °C and the V{sub C} concentration is demonstrated to be strongly reduced, exhibiting a value of only a few times 10{sup 11 }cm{sup −3} as determined by deep-level transient spectroscopy measurements. The value is reached already after annealing times on the order of 1 h and is evidenced to reflect thermodynamic equilibrium under C-rich ambient conditions. The physical processes controlling the kinetics for establishment of the V{sub C} equilibrium are estimated to have an activation energy below ∼3 eV and both in-diffusion of carbon interstitials and out-diffusion of V{sub C}'s are discussed as candidates. This concept of V{sub C} elimination is flexible and readily integrated in a materials and device processing sequence.

36 MATERIALS SCIENCE↗

Synaptic devices based on purely electronic memristors

Memristive devices have been widely employed to emulate biological synaptic behavior. In these cases, the memristive switching generally originates from electrical field induced ion migration or Joule heating induced phase change. In this letter, the Ti/ZnO/Pt structure was found to show memristive switching ascribed to a carrier trapping/detrapping of the trap sites (e.g., oxygen vacancies or zinc interstitials) in ZnO. The carrier trapping/detrapping level can be controllably adjusted by regulating the current compliance level or voltage amplitude. Multi-level conductance states can, therefore, be realized in such memristive device. The spike-timing-dependent plasticity, an important Hebbian learning rule, has been implemented in this type of synaptic device. Compared with filamentary-type memristive devices, purely electronic memristors have potential to reduce their energy consumption and work more stably and reliably, since no structural distortion occurs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microstructure and oxidation behavior of high strength steel AISI 410 implanted with nitrogen ion

Surface treatment by implantation with nitrogen-ion was performed on the commercial feritic high strength steel AISI 410 which is termed for high temperature applications. The aim of this research was focused on the surface modification to improve its high temperature oxidation property in the early stages. Ion implantation was carried out at acceleration energy of 100 KeV and ion current 10 mA for 30, 60 and 90 minutes. The samples were subjected to the high temperature oxidation test by means of thermogravimetry in a magnetic suspension balance (MSB) at 500 °C for 5 hours. The scanning electron microscopy (SEM), X-ray diffraction spectrometry (XRD) and Vickers Hardness measurement were used for sample characterization. The formation of ferro-nitride phase after implantation did not occur, however a thin layer considered to contain nitrogen interstitials was detected. The oxidation of both samples before and after implantation followed parabolic kinetics indicating inward growth of oxide scale characteristically due to diffusion of oxygen anions towards matrix surface. After oxidation test relativelly stable oxide scales were observed. Oxidation rates decreased proportionally with the increasing of implantation time due to the formation of oxide layer which is considered to be effectiv inhibitor for the oxygen diffusion.

36 MATERIALS SCIENCE↗

Room temperature ammonia and VOC sensing properties of CuO nanorods

Here, we report a NH{sub 3} and Volatile Organic Compounds (VOCs) sensing prototype of CuO nanorods with peculiar sensing characteristics at room temperature. High quality polycrystalline nanorods were synthesized by a low temperature hydrothermal method. The rods are well oriented with an aspect ratio of 5.71. Luminescence spectrum of CuO nanorods exhibited a strong UV-emission around 415 nm (2.98 eV) which arises from the electron-hole recombination phenomenon. The absence of further deep level emissions establishes the lack of defects such as oxygen vacancies and Cu interstitials. At room temperature, the sensor response was recorded over a range of gas concentrations from 100-600 ppm of ammonia, ethanol and methanol. The sensor response showed power law dependence with the gas concentration. This low temperature sensing can be validated by the lower value of calculated activation energy of 1.65 eV observed from the temperature dependent conductivity measurement.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Defects and properties of cadmium oxide based transparent conductors

Transparent conductors play an increasingly important role in a number of semiconductor technologies. This paper reports on the defects and properties of Cadmium Oxide, a transparent conducting oxide which can be potentially used for full spectrum photovoltaics. We carried out a systematic investigation on the effects of defects in CdO thin films undoped and intentionally doped with In and Ga under different deposition and annealing conditions. We found that at low growth temperatures (<200 °C), sputter deposition tends to trap both oxygen vacancies and compensating defects in the CdO film resulting in materials with high electron concentration of ∼2 × 10{sup 20}/cm{sup 3} and mobility in the range of 40–100 cm{sup 2}/V s. Thermal annealing experiments in different ambients revealed that the dominating defects in sputtered CdO films are oxygen vacancies. Oxygen rich CdO films grown by sputtering with increasing O{sub 2} partial pressure in the sputter gas mixture results in films with resistivity from ∼4 × 10{sup −4} to >1 Ω cm due to incorporation of excess O in the form of O-related acceptor defects, likely to be O interstitials. Intentional doping with In and Ga donors leads to an increase of both the electron concentration and the mobility. With proper doping CdO films with electron concentration of more than 10{sup 21 }cm{sup −3} and electron mobility higher than 120 cm{sup 2}/V s can be achieved. Thermal annealing of doped CdO films in N{sub 2} ambient can further improve the electrical properties by removing native acceptors and improving film crystallinity. Furthermore, the unique doping behavior and electrical properties of CdO were explored via simulations based on the amphoteric defect model. A comparison of the calculations and experimental results show that the formation energy of native donors and acceptors at the Fermi stabilization energy is ∼1 eV and that the mobility of sputtered deposited CdO is limited by a background acceptor concentration of ∼5–6 × 10{sup 20}/cm{sup 3}. The calculations offer an insight into understanding of the effects of defects on electrical properties of undoped and doped CdO and offer a potential to use similar methods to analyze doping and defect properties of other semiconductor materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Silver migration and trapping in ion implanted ZnO single crystals

Potentially, group-Ib elements (Cu, Ag, and Au) incorporated on Zn sites can be used for p-type doping of ZnO, and in the present paper, we use ion implantation to introduce Ag atoms in wurtzite ZnO single crystals. Monitoring the Li behavior, being a residual impurity in the crystals, as a tracer, we demonstrate that Zn interstitials assist the Ag diffusion and lead to Ag pile-up behind the implanted region after annealing above 800 °C. At even higher temperatures, a pronounced Ag loss from the sample surface occurs and concurrently the Ag atoms exhibit a trap-limited diffusion into the crystal bulk with an activation energy of ∼2.6 eV. The dominant traps are most likely Zn vacancies and substitutional Li atoms, yielding substitutional Ag atoms. In addition, formation of an anomalous multipeak Ag distribution in the implanted near-surface region after annealing can be attributed to local implantation-induced stoichiometry disturbances leading to trapping of the Ag atoms by O and Zn vacancies in the vicinity of the surface and in the end-of-range region, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Origin and annealing of deep-level defects in GaNAs grown by metalorganic vapor phase epitaxy

Deep-level defects were investigated by deep level transient spectroscopy on the as-grown and annealed GaNAs layers of various nitrogen (N) contents. The unintentionally doped (uid) GaNAs layers were grown by metalorganic vapor phase epitaxy with N = 1.4%, 2.0%, 2.2%, and 2.4% on GaAs substrate. The possible origin and evolution of the deep-level defects upon annealing were analyzed with the use of the GaNAs band gap diagram concept [Kudrawiec et al., Appl. Phys. Lett. 101, 082109 (2012)], which assumes that the activation energy of donor traps decreases with N-related downward shift of the conduction band. On the basis of this diagram and in comparison with previous results, the N-related traps were associated with (N−As){sub As} or (N−N){sub As} split interstitials. It was also proposed that one of the electron traps and the hole trap, lying at the same level position in the bandgap of the annealed uid-GaNAs layers, can both act as one generation-recombination center partially responsible for poor optical properties of this alloy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influences of defects evolvement on the properties of sputtering deposited ZnO:Al films upon hydrogen annealing

Understanding how the defects interact with each other and affect the properties of ZnO:Al films is very important for improving their performance as a transparent conductive oxide (TCO). In the present work, we studied the effects of hydrogen annealing on the structural, optical and electrical properties of ZnO:Al films prepared by magnetron sputtering. High resolution transmission electron microscopy observations reveal that annealing at ∼300 {sup o}C induces the formation of partial dislocations (PD) and stacking faults (SF), which disrupt the lattice periodicity leading to decreased grain size. Annealing at temperatures above ∼500 {sup o}C can remove the PD and SF, but large number of zinc vacancies will be generated. Our results show that when films are annealed at ∼500 {sup o}C, the oxygen-related defects (interstitials O{sub i}, etc.) in the as-grown films can be remarkably removed or converted, which lead to increments in the carrier concentration, mobility, and the transmittance in the visible range. At annealing temperatures above 550 {sup o}C, the hydrogen etching effect becomes predominant, and Al donors are deactivated by zinc vacancies. We also find an abnormal endothermic process by thermal analysis and an abnormal increase in the resistivity during heating the sample under hydrogen atmosphere, based on which the interaction of O{sub i} with the defects (mainly Al donors and PD) is discussed. It is also demonstrated that by annealing the as-grown AZO films at ∼500 {sup o}C under hydrogen atmosphere, high performance TCO films with a low resistivity of 4.48 × 10{sup −4} Ωcm and high transmittance of above 90% in the visible light are obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fibreoptic diffuse-light irradiators of biological tissues

We report techniques for the fabrication of laser radiation diffusers for interstitial photodynamic therapy. Using chemical etching of the distal end of silica fibre with a core diameter of 200 - 600 {mu}m, we have obtained long (up to 40 mm) diffusers with good scattering uniformity. Laser ablation has been used to produce cylindrical diffusers with high emission contrast and a scattering uniformity no worse than {approx}10 % in their middle part. The maximum length of the diffusers produced by this method is 20 - 25 mm. (laser applications and other topics in quantum electronics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Annealing of induced absorption in quartz glasses by ArF laser radiation

Annealing of individual bands of electron-beam-induced absorption (IA) in the region of 150 - 400 nm in KS-4V, KU-1, and Corning 7980 (ArF Grade) quartz glasses by ArF laser radiation is studied. It is shown that the phototransformation of the IA spectra occurs mainly due to a significant decrease in the amplitudes of bands at {lambda} = 183.5, 213, and 260 nm. The role played by interstitial oxygen, hydrogen, and chlorine in the formation and relaxation of glass defects is considered. (effects of laser radiation on matter. laser plasma)

36 MATERIALS SCIENCE↗

Cortexin diffusion in human eye sclera

Investigation of the diffusion of cytamines, a typical representative of which is cortexin, is important for evaluating the drug dose, necessary to provide sufficient concentration of the preparation in the inner tissues of the eye. In the present paper, the cortexin diffusion rate in the eye sclera is measured using the methods of optical coherence tomography (OCT) and reflectance spectroscopy. The technique for determining the diffusion coefficient is based on the registration of temporal dependence of the eye sclera scattering parameters caused by partial replacement of interstitial fluid with the aqueous cortexin solution, which reduces the level of the OCT signal and decreases the reflectance of the sclera. The values of the cortexin diffusion coefficient obtained using two independent optical methods are in good agreement. (optical technologies in biophysics and medicine)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On the possibility of increasing lifetime of a neutron generator target through laser-induced nanorelief generation at the film – substrate interface

The evolution of an ensemble of point defects (vacancies and interstitials) produced by irradiating a tritium-saturated titanium target (sorbent film on substrate) with deuterium is considered. It is shown that when the concentration of defects exceeds a certain critical value, the film undergoes transition into a quasiperiodic bent state with simultaneous clustering of defect aggregates at the relief extrema, spontaneously created at the film – substrate interface and at the film free surface. The aggregation of vacancies leads to the formation of pores. The subsequent deadherence or rapture of the film in the regions of large pores at the film – substrate interface leads to irreversible degradation of the target. We discuss the possibility of suppressing this effect by nanostructuring a laser-induced nanorelief at the substrate surface before the sorbent film deposition. Different types of such a relief are experimentally demonstrated. (interaction of laser radiation with matter)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrodynamic effects in laser cutting of biological tissue phantoms

We study the thermal and transport processes that occur in the course of incision formation at the surface of a biological tissue phantom under the action of near-IR, moderate-power, continuous-wave laser radiation (λ = 1.94 μm) delivered by means of an optical fibre with an absorbing coating on its exit face. It is shown that in addition to the thermal effect, the laser-induced hydrodynamic effects caused by the explosive boiling of the interstitial water make a large contribution to the phantom destruction mechanism. These effects lead to the tissue rupture accompanied by the ejection of part of the fragmented substance from the site of laser impact and the formation of highly porous structure near the incision surface. We have found that the depth, the width and the relief of the laser incision wall in the case of using the optical fibre moving with a constant velocity, depend on the fibre tilt angle with respect to the phantom surface, as well as the direction of the fibre motion. (laser medicine)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Heavy-ion irradiations of Fe and Fe-Cr model alloys part 2: damage evolution in thin-foils at higher doses.

A study of heavy-ion damage in Fe and Fe-Cr alloys started in Part 1 1 was continued with an investigation of damage development in UHP Fe and Fe-8%Cr at higher doses up to 2 x 10{sup 19} ions m{sup -2} ({approx}13 dpa). In thin-foil irradiations with 150 keV Fe{sup +} ions at 300 C and room temperature (RT), more complex microstructures started to develop in thicker regions of the foils at doses greater than about 2 x 10{sup 18} ions m{sup -2}, apparently involving cooperative interaction, alignment and coalescence of smaller loops. First strings of loops all with the same 1/2 111 Burgers vectors formed. In UHP Fe irradiated at 300 C the damage then developed into colonies of resolvable interstitial loops with 1/2 111 Burgers vectors. By a dose of 2 x 10{sup 19} ions m{sup -2}, large (several hundred nanometer) finger-shaped loops with large shear components had developed by the growth and subsequent coalescence of smaller loops. Similar but finer-scale damage structures developed in UHP Fe irradiated at RT and in Fe-8%Cr irradiated at both RT and 300 C.

36 MATERIALS SCIENCE↗

Dissociation of migrating particle from trap with long-range interaction field

Some lattice defects, such as dislocations, interact with migrating species, e.g. vacancies, interstitial atoms and their clusters, via long-range strain fields. In this paper, an equation for the mean dissociation time of a migrating particle from a trap is derived in terms of the potential well function for the interaction energy. The distribution of dissociation times is studied by the Monte Carlo method, and the problem of particle exchange between spatially separated traps is considered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implementation of a Fe-He Three-body Interatomic Potential

The implementation of a recently-developed interatomic potential describing the interactions of helium in bcc iron is described. This He-Fe potential was based on an empirical fit to the results of ab initio calculations of both the formation and relaxation energies of small helium defect structures in iron. The fitting database included substitutional and interstitial helium, as well as small helium and helium-vacancy clusters. In contrast to previous He-Fe pair potentials, fitting the ab initio forces and energies required the use of a three-body interaction term. The implementation of this potential for atomistic simulations using molecular dynamics presented certain challenges which are discussed here to facilitate its further use in materials research, particularly to investigate the behavior of iron-based alloys that may be employed in fusion energy systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ULTRAVIOLET RADIATION INSIDE INTERSTELLAR GRAIN AGGREGATES. III. FLUFFY GRAINS

We study the problem of light depolarization within fluffy interstellar dust grains, in which coagulation generates interstitial cavities partly filled with icy condensed gas. A significant amount of elliptical polarized ultraviolet radiation may be generated in situ by geometry-induced depolarization within the cavities. The behavior of the depolarization is studied both by changing the orientation of the aggregates and by changing chemical composition and size of the subunits forming the aggregate. We found that a considerable amount of depolarization occurs within the ice mantles of the subunits, provided their thickness is not too large. We discuss the implications of these results for chiral selection in space.

79 ASTRONOMY AND ASTROPHYSICS↗

Local environment of Mn in Mn delta-doped Si layers

Dilute magnetic semiconductors combine both magnetic ordering and semiconducting behaviour, leading to potential spintronic applications. Silicon containing dilute Mn impurities is a potential dilute magnetic semiconductor. We have grown Mn delta-doped films by deposition of 0.7 of a monolayer of Mn on Si(001) by molecular beam epitaxy and capping the film with Si. The magnetic properties are likely sensitive to the distribution of Mn on substitutional or interstitial sites and the formation of metallic precipitates. We have used polarization-dependent XAFS to examine the local structure. We compare to a thicker MnSi film grown on Si(111) and also examine the influence of lead on the manganese environment when used as a surfactant in the growth process.

36 MATERIALS SCIENCE↗