Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Heterogeneity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Estimating and Evaluating Roughness Length and Displacement Height in Heterogeneous Urban Environments

The roughness length (z 0 ) and displacement height (z d ) are essential surface-layer parameters in numerical models (e.g., weather, climate, wall-modeled LES, etc.). This work evaluates the consistency of z 0 and z d estimates from morphometric and anemometric methods using data from two eddy-covariance flux towers (AmeriFlux US-INg and US-INc) in Indianapolis, IN. Results show inconsistencies in estimated z 0 and z d values depending on the chosen method. The two evaluated anemometric methods estimate non-physical values of z d when compared to roughness elements surrounding both towers. Additionally, predictions of mean wind speed using surface-layer similarity theory with morphometric estimates exhibit a bias during near-neutral and stable conditions relative to observations. The overestimation of mean wind speed by surface layer similarity theory is consistent with previous observational and modeling studies in urban areas, suggesting that the application of similarity theories to urban environments may have limitations. Differentiation of vegetation from built structures appears to impact morphometric z 0 and z d estimates, particularly where vegetation is abundant; however, it has little impact on correcting biases in the similarity theory. Specifically, we find that existing similarity theories using morphometric estimates underestimate integral velocity and length scales, and the degree of underestimation depends on the stability conditions. Accounting for the degree of anisotropy in surface-layer turbulence helps reduce the biases between similarity theories and observations during unstable conditions, but not in near-neutral cases. Future work is needed to identify the cause of such biases for near-neutral conditions.

Aerodynamic roughness length↗
DOE OSTI2020

Microstructure Generation via Generative Adversarial Network for Heterogeneous, Topologically Complex 3D Materials

Using a large-scale, experimentally captured 3D microstructure dataset, we implement the generative adversarial network (GAN) framework to learn and generate 3D microstructures of solid oxide fuel cell electrodes. The generated microstructures are visually, statistically, and topologically realistic, with distributions of microstructural parameters, including volume fraction, particle size, surface area, tortuosity, and triple phase boundary density, being highly similar to those of the original microstructure. These results are compared and contrasted with those from an established, grain-based generation algorithm (DREAM.3D). Importantly, simulations of electrochemical performance, using a locally resolved finite element model, demonstrate that the GAN generated microstructures closely match the performance distribution of the original, while DREAM.3D leads to significant differences. Finally, the ability of the generative machine learning model to recreate microstructures with high fidelity suggests that the essence of complex microstructures may be captured and represented in a compact and manipulatable form.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Heterogeneous 3D Morphological Evolution of Ni Microparticles in Molten Salts: Visualized by Operando Synchrotron X-ray Nano-tomography

Ni-based superalloys are promising materials for high-temperature molten salt (MS) energy generation and storage. Studying morphological and chemical evolution of pure Ni in MS provides fundamental knowledge for MS technologies and corrosion mitigation. Here, in this study, real-time 3D morphological changes of Ni microparticles in molten KCl-MgCl 2 were studied by operando synchrotron X-ray nano-tomography at 700°C. Rapid Ni particle agglomeration occurred, without significant chemical reactions, such as oxide or chloride formation. The morphological growth evolved differently from classical coarsening or sintering behaviors and occurred nonuniformly, with other regions showing slight dissolution of Ni. Ni nanoparticles were found to be dispersed in many areas of the samples, either from microparticle dissolution or other radiation-induced nanoparticle formation mechanisms. This study discusses important factors, i.e., thermal gradient, amounts of salt and metals, and radiation effect, that influence morphological changes of materials in MS, critical for fundamental understanding of material–MS interactions as well as for practical applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mechanisms of water oxidation on heterogeneous catalyst surfaces

Water oxidation, an essential step in photosynthesis, has attracted intense research attention. Understanding the reaction pathways at the electrocatalyst/water interface is of great importance for the development of water oxidation catalysts. How the water is oxidized on the electrocatalyst surface by the positive charges is still an open question. This review summarizes current advances in studies on surface chemistry within the context of water oxidation, including the intermediates, reaction mechanisms, and their influences on the reaction kinetics. The Tafel analyses of some electrocatalysts and the rate-laws relative to charge consumption rates are also presented. Moreover, how the multiple charge transfer relies on the intermediate coverage and the accumulated charge numbers is outlined. Finally, the intermediates and rate-determining steps on some water oxidation catalysts are discussed based on density functional theories.

14 SOLAR ENERGY↗
DOE OSTI2020

Deformation heterogeneity and intragrain lattice misorientation in high strength contrast, dual-phase bridgmanite/periclase

A bridgmanite/periclase aggregate is investigated due to its prevalence in the Earth’s lower mantle and its importance for understanding geodynamic processes. In dual-phase polycrystalline aggregates, both strength contrast between phases and single crystal elastic and plastic anisotropy are known to influence the development of intragrain misorientation, and the evolution of crystallographic texture. In this study, full-field crystal plasticity simulations are performed with a finite element solution method, and applied to an aggregate of a mechanically strong orthorhombic phase with perovskite structure (bridgmanite, MgSiO 3 ), and a relatively weaker cubic phase (periclase, MgO). The relative strengths of the phases are parameterized to elucidate the effect that strength contrast has on texture evolution and single-phase simulations are performed for comparison. Altogether, results indicate that the relative strength between the two phases influences the development of plasticity, and the overall texture evolution. Results are discussed in light of trends related to the evolution of plasticity and misorientation in the aggregate, and their dependence on both the strength contrast between phases as well as the spatial distribution of grains and phases.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Intermetallic particle heterogeneity controls shear localization in high-strength nanostructured Al alloys

The mechanical behavior of two nanocrystalline Al alloys, Al-Mg-Y and Al-Fe-Y, is investigated with in-situ micropillar compression testing. Both alloys were strengthened by a hierarchical microstructure including grain boundary segregation, nanometer-thick amorphous complexions, carbide nanorod precipitates with sizes of a few nanometers, and submicron-scale intermetallic particles. The maximum yield strength of the Al-Mg-Y system is measured to be 950 MPa, exceeding that of the Al-Fe-Y system (680 MPa), primarily due to a combination of more carbide nanorods and more amorphous complexions. Both alloys exhibited yield strengths much higher than those of commercial Al alloys, and therefore have great potential for structural applications. However, some micropillar specimens were observed to plastically soften through shear banding. Post-mortem investigation revealed that intermetallic-free deformation pathways of a few micrometers in length were responsible for this failure. Further characterization showed significant grain growth within the shear band. The coarsened grains maintained the same orientation with each other, pointing to grain boundary mechanisms for plastic flow, specifically grain rotation and/or grain boundary migration. Here, the presence of intermetallic particles makes it difficult for both matrix and intermetallic grains to rotate into the same orientation due to the different lattice parameters and slip systems. Therefore, we are able to conclude that a uniform distribution of intermetallic particles with an average spacing less than the percolation length of shear localization can effectively prevent the maturation of shear bands, offering a design strategy for high-strength nanocrystalline Al alloys with both high strength and stable plastic flow.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mapping structural heterogeneity at the nanoscale with scanning nano-structure electron microscopy (SNEM)

Here, in this work, we explore the use of scanning electron diffraction (also known as 4D-STEM) coupled with electron atomic pair distribution function analysis (ePDF) to understand the local order (structure and chemistry) as a function of position in a complex multicomponent system, a hot rolled, Ni-encapsulated, Zr 65 Cu 17.5 Ni 10 Al 7.5 bulk metallic glass (BMG), with a spatial resolution of 3 nm. We show that it is possible to gain insight into the chemistry and chemical clustering/ordering tendency in different regions of the sample, including in the vicinity of nano-scale crystallites that are identified from virtual dark field images and in heavily deformed regions at the edge of the BMG. In addition to simpler analysis, unsupervised machine learning was used to extract partial PDFs from the material, modeled as a quasi-binary alloy, and map them in space. These maps allowed key insights not only into the local average composition, as validated by EELS, but also a unique insight into chemical short-range ordering tendencies in different regions of the sample during formation. The experiments are straightforward and rapid and, unlike spectroscopic measurements, don’t require energy filters on the instrument. We spatially map different quantities of interest (QoI’s), defined as scalars that can be computed directly from positions and widths of ePDF peaks or parameters refined from fits to the patterns. We developed a flexible and rapid data reduction and analysis software framework that allows experimenters to rapidly explore images of the sample on the basis of different QoI’s. The power and flexibility of this approach are explored and described in detail. Because of the fact that we are getting spatially resolved images of the nanoscale structure obtained from ePDFs we call this approach scanning nano-structure electron microscopy (SNEM), and we believe that it will be powerful and useful extension of current 4D-STEM methods.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Influence of microstructural heterogeneities on small-scale mechanical properties of an additively manufactured Al-Ce-Ni-Mn alloy

Laser powder bed fusion-based additive manufacturing (AM) is a promising method to fabricate creep-resistant Al-rare earth alloys (Al-Ce-Ni-Mn) with stable microstructures at up to 400°C. However, creep testing of these alloys at high temperatures shows that void coalescence and failure initiation occurs along the melt pool boundaries in the microstructure. Hence it is crucial to understand how the local mechanical behavior of the melt pool boundaries would influence the global properties of the AM produced alloy. In this study, in situ nanoindentation conducted at room temperature and 300°C revealed a reduced hardness at the melt pool boundaries. Similarly, micro-pillar compression showed a slight decline in yield strength at these boundaries, indicating that they are the weak spots in the microstructure. Such multimodal local mechanical property studies are necessary for understanding the influence of melt pool boundaries on the bulk response of fusion-based AM alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Transport Upscaling under Flow Heterogeneity and Matrix-Diffusion in Three-Dimensional Discrete Fracture Networks

For this work, we investigate the combined effects of network scale flow variability and retention due to matrix-diffusion on the scaling behavior of transport through fractured media. Two of the principal mechanisms controlling the transport of solutes through fractured low-permeability media are broad distributions of flow velocities and retention times in the solid matrix. We study the relative impact of these two processes under different initial conditions using a set of three-dimensional discrete fracture network simulations. We use these simulations to develop and calibrate an upscaled continuous time random walk (CTRW) approach for advective transport based on an Ornstein-Uhlenbeck model for the particle velocities that accounts for the fracture-matrix coupling using a compound Poisson process. This CTRW model can be conditioned on the initial solute distribution and allows to observe late-time scaling behavior at distances beyond what is feasible to observe using high-fidelity direct numerical simulations. We determine that the initial distribution of particles leads to marked differences in the persistent long-term scale behavior in the solute travel time distributions, even those undergoing retention due to matrix diffusion through implementation and analysis of the model.

54 ENVIRONMENTAL SCIENCES↗