Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Investigations on the temperature dependent electrical and magnetic properties of NiTiO{sub 3} by molten salt synthesis

Highlights: ► NiTiO{sub 3} particles were synthesized by simple molten salt technique. ► The single phase compound formation was confirmed through XRD analysis. ► The detailed impedance properties of NiTiO{sub 3} were studied at elevated temperature. ► The conductance spectra were fitted using Jonscher Power Law. ► Low temperature magnetization behaviour was explained by core shell model. - Abstract: Submicron-sized NiTiO{sub 3} particles were successfully synthesized by simple molten salt method. The phase purity and crystal structure was confirmed through X-ray diffraction. The characteristics bands of Ni-O and Ti-O were identified using Fourier Transform Infra-red spectrum. The SEM and TEM images shows that the particles are lying in the range of 150–300 nm and selected area electron diffraction pattern (SAED) infers the single crystalline nature of NiTiO{sub 3}. The impedance spectra elucidate the grain interior conducting mechanism and semi-conducting nature of NiTiO{sub 3} at elevated temperatures. The frequency dependent conductance spectra were found to obey Jonscher's power law and a maximum value of conductivity observed was 2 × 10{sup −5} S cm{sup −1} at 520 °C. The magnetic susceptibility measurement infers the antiferromagnetic behavior with the Neel temperature (T{sub N}) of 14.9 K. The increase in coercivity below T{sub N} reveals the coexistence of antiferromagnetic with superparamagnetic behavior. B–H curve represents the first order phase transition from antiferromagnetic to ferromagnetic transition.

36 MATERIALS SCIENCE↗

Novel symmetrical coralloid Cu 3D superstructures: Solid-state synthesis from a Cu-carboxylate MOF and their in-situ thermal conversion

We describe here a one-step solid-state process for the synthesis of metal three-dimensional (3D) superstructures from a metal-organic framework (MOF). Novel symmetrical coralloid Cu 3D superstructures with surface interspersed with clusters of Cu nanoparticles were successfully synthesized by thermolysis of the [Cu{sub 3}(btc){sub 2}] (btc=benzene-1,3,5-tricarboxylato) MOF in a one-end closed horizontal tube furnace (OCTF). The obtained products were characterized by TGA, FT-IR, XRD, EDX, SEM, TEM, HRTEM and SAED. Different reaction conditions were discussed. Furthermore, the synthesized Cu samples were converted into CuO microstructures by in-situ calcination in the air. In addition, the possible formation mechanism was also proposed. This method is a simple and facile route, which builds a direct linkage between metal-carboxylate MOF crystals and metal nano- or microstructures and also opens a new application field of MOFs. - Graphical abstract: Novel symmetrical coralloid Cu 3D superstructures were synthesized by thermolysis of the [Cu{sub 3}(btc){sub 2}] (btc=benzene-1,3,5-tricarboxylato) MOF microcrystals in a one-end closed horizontal tube furnace (OCTF).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Avoiding polar catastrophe in the growth of polarly orientated nickel perovskite thin films by reactive oxide molecular beam epitaxy

By means of the state-of-the-art reactive oxide molecular beam epitaxy, we synthesized (001)- and (111)-orientated polar LaNiO{sub 3} thin films. In order to avoid the interfacial reconstructions induced by polar catastrophe, screening metallic Nb-doped SrTiO{sub 3} and iso-polarity LaAlO{sub 3} substrates were chosen to achieve high-quality (001)-orientated films in a layer-by-layer growth mode. For largely polar (111)-orientated films, we showed that iso-polarity LaAlO{sub 3} (111) substrate was more suitable than Nb-doped SrTiO{sub 3}. In situ reflection high-energy electron diffraction, ex situ high-resolution X-ray diffraction, and atomic force microscopy were used to characterize these films. Our results show that special attentions need to be paid to grow high-quality oxide films with polar orientations, which can prompt the explorations of all-oxide electronics and artificial interfacial engineering to pursue intriguing emergent physics like proposed interfacial superconductivity and topological phases in LaNiO{sub 3} based superlattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disruption of crystalline structure of Sn3.5Ag induced by electric current

This study presented the disruption of the Sn and Ag{sub 3}Sn lattice structures of Sn3.5Ag solder induced by electric current at 5–7 × 10{sup 3} A/cm{sup 2} with a high resolution transmission electron microscope investigation and electron diffraction analysis. The electric current stressing induced a high degree of strain on the alloy, as estimated from the X-ray diffraction (XRD) peak shift of the current stressed specimen. The XRD peak intensity of the Sn matrix and the Ag{sub 3}Sn intermetallic compound diminished to nearly undetectable after 2 h of current stressing. The electric current stressing gave rise to a high dislocation density of up to 10{sup 17}/m{sup 2}. The grain morphology of the Sn matrix became invisible after prolonged current stressing as a result of the coalescence of dislocations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-temperature self-limiting atomic layer deposition of wurtzite InN on Si(100)

In this work, we report on self-limiting growth of InN thin films at substrate temperatures as low as 200 °C by hollow-cathode plasma-assisted atomic layer deposition (HCPA-ALD). The precursors used in growth experiments were trimethylindium (TMI) and N{sub 2} plasma. Process parameters including TMI pulse time, N{sub 2} plasma exposure time, purge time, and deposition temperature have been optimized for self-limiting growth of InN with in ALD window. With the increase in exposure time of N{sub 2} plasma from 40 s to 100 s at 200 °C, growth rate showed a significant decrease from 1.60 to 0.64 Å/cycle. At 200 °C, growth rate saturated as 0.64 Å/cycle for TMI dose starting from 0.07 s. Structural, optical, and morphological characterization of InN were carried out in detail. X-ray diffraction measurements revealed the hexagonal wurtzite crystalline structure of the grown InN films. Refractive index of the InN film deposited at 200 °C was found to be 2.66 at 650 nm. 48 nm-thick InN films exhibited relatively smooth surfaces with Rms surface roughness values of 0.98 nm, while the film density was extracted as 6.30 g/cm{sup 3}. X-ray photoelectron spectroscopy (XPS) measurements depicted the peaks of indium, nitrogen, carbon, and oxygen on the film surface and quantitative information revealed that films are nearly stoichiometric with rather low impurity content. In3d and N1s high-resolution scans confirmed the presence of InN with peaks located at 443.5 and 396.8 eV, respectively. Transmission electron microscopy (TEM) and selected area electron diffraction (SAED) further confirmed the polycrystalline structure of InN thin films and elemental mapping revealed uniform distribution of indium and nitrogen along the scanned area of the InN film. Spectral absorption measurements exhibited an optical band edge around 1.9 eV. Our findings demonstrate that HCPA-ALD might be a promising technique to grow crystalline wurtzite InN thin films at low substrate temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facile and low cost oxidative conversion of MoS{sub 2} in α-MoO{sub 3}: Synthesis, characterization and application

This study describes a facile low cost route to synthesize the α-MoO{sub 3} through a conversion of the precursor MoS{sub 2} in oxidant media. The structure and morphology of the α-MoO{sub 3} were studied by high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The results show that α-MoO{sub 3} was obtained with reduced size, high purity, strongly-preferred orientation and structural defects, which ensures versatility and multifunctionality to this sample. For the purpose of applications, α-MoO{sub 3} was successfully employed in inverted organic solar cells devices as a possible alternative to the PEDOT:PSS in the hole transportation layer. - Graphical abstract: Synthesis process based on low cost oxidative conversion of MoS{sub 2} in α-MoO{sub 3} Display Omitted - Highlights: • A facile route to obtain α-MoO{sub 3} by refluxing the MoS{sub 2} precursor in oxidant media. • High purity and strongly-preferred orientation. • Belt-shaped material. • Enhanced conversion efficiency (PCE) when compared with conventional PEDOT:PSS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ x-ray diffraction studies on post-deposition vacuum-annealing of ultra-thin iron oxide films

A maghemite ({gamma}-Fe{sub 2}O{sub 3}) film of 8.3 nm thickness is epitaxially grown on MgO(001) single crystal substrate by reactive molecular beam epitaxy. Chemical composition and crystal structure of the surface was studied by x-ray photoelectron spectroscopy and low energy electron diffraction, respectively. Afterwards the sample was moved to a heating cell for in situ x-ray diffraction experiments on the post-deposition annealing process in high-vacuum to study structural phase transitions of the iron oxide film. The iron oxide film is reduced with increasing temperature. This reduction occurs in two steps that are accompanied by structural transitions. The first step is a reduction from {gamma}-Fe{sub 2}O{sub 3} to Fe{sub 3}O{sub 4} at 360 deg. C and the second step is the reduction from Fe{sub 3}O{sub 4} to FeO at 410 deg. C.

36 MATERIALS SCIENCE↗

Intense white luminescence in ZnTe embedded porous silicon

Porous silicon layers were embedded with ZnTe using the isothermal close space sublimation technique. The presence of ZnTe was demonstrated using cross-sectional energy dispersive spectroscopy maps. ZnTe embedded samples present intense room temperature photoluminescence along the whole visible range. We ascribe this PL to ZnTe nanocrystals of different sizes grown on the internal pore surface. Such crystals, with different orientations and sizes, were observed in transmission electron microscopy images, while transmission electron diffraction images of the same regions reveal ZnTe characteristic patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solid-to-solid phase transformations of nanostructured selenium-tin thin films induced by thermal annealing in oxygen atmosphere

The structural and morphological evolution of nanostructured thin films obtained from thermal evaporation of polycrystalline Sn-Se starting charge as a function of the subsequent annealing temperature in an oxygen flow has been analysed. High-resolution transmission electron microscopy, small area electron diffraction, digital image processing, x-ray diffraction and Raman spectroscopy have been employed in order to investigate the structure and the morphology of the obtained films. The results evidenced, in the temperature range from RT to 500°C, the transition of the material from a homogeneous mixture of SnSe and SnSe{sub 2} nanocrystals, towards a homogeneous mixture of SnO{sub 2} and SeO{sub 2} nanocrystals, with an intermediate stage in which only SnSe{sub 2} nanocrystals are present.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular-Beam Epitaxy of Two-Dimensional GaSe Layers on GaAs(001) and GaAs(112) Substrates: Structural and Optical Properties

The results of studies of the structural and optical properties of two-dimensional GaSe layers grown by molecular-beam epitaxy on GaAs(001) and GaAs(112) substrates using a valve cracking cell for the Se source are reported. The influence of the MBE growth parameters (the substrate temperature, Ga flux intensity, Se/Ga incident flux ratio) on the surface morphology of the layers is studied. By means of transmission electron microscopy, electron diffraction technique, and Raman spectroscopy, it is shown that the structure of the GaSe layers corresponds to the γ-GaSe polytype. From X-ray diffraction analysis, it is established that there exist α-Ga{sub 2}Se{sub 3} inclusions in the GaSe layers grown under conditions of high enrichment of the growth surface with Se.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial europium oxide on Ni(100) with single-crystal quality

High quality epitaxy of EuO on Ni(100) is developed in an in situ scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED) study. A careful selection of the initial growth parameters is decisive to obtain a surface oxide suitable for the subsequent epitaxy of single phase EuO(100). After the creation of a three layer thick coalesced oxide film for the subsequent growth a distillation technique is applied. Appropriate annealing of films with up to 100 nm thickness generates sufficient conductivity for STM and electron spectroscopies. Oxygen vacancies are directly imaged by STM. They are of decisive importance for the metal-to-insulator transition around the temperature of the ferromagnetic-to-paramagnetic transition. A fast relaxation of the initial biaxial strain observed by LEED leaves little hope for an increase of the Curie temperature through epitaxial compression. Ex situ x-ray adsorption spectroscopy and magneto-optical Kerr effect microscopy measurements of thicker films are consistent with the stoichiometric single phase EuO with bulk properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on improved performance of Erbium doped TiO2 nanowire based UV detector

Highlights: • PL study showed the removal of oxygen defects of TiO{sub 2} material after Er doping. • Superior photosensitivity was obtained for Er:TiO{sub 2} NW based detector. • Detectivity and NEP were calculated for both undoped and doped detectors. • Photoswitching was observed for Er:TiO{sub 2} NW detector at 350 nm of wavelength. - Abstract: Undoped TiO{sub 2} and Erbium doped TiO{sub 2} nanowires (Er:TiO{sub 2} NWs) were synthesized on respective thin films using e-beam cum glancing angle deposition technique onto n-type silicon substrates. The length of the NWs was ∼182 nm as calculated from field emission gun scanning electron microscopy images. Transmission electron microscopy showed an average NW length of 173 nm. Polycrystalline nature of both samples was obtained from the selected area electron diffraction analysis as well as from the X-ray diffraction (XRD) analysis. Energy dispersive X-ray spectroscopy and variation in the grain size (calculated from XRD) confirmed the doping of Erbium in case of Er:TiO{sub 2} NWs. Increased absorption, as well as enhanced bandgap, was observed for Er:TiO{sub 2} NWs compared to the undoped TiO{sub 2} NWs. Superior device performance in terms of detectivity, sensitivity and photoswitching was obtained for Er:TiO{sub 2} NWs as compared to the undoped TiO{sub 2} NWs in the UV region.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth of InP on GaAs (001) by hydrogen-assisted low-temperature solid-source molecular beam epitaxy

Direct heteroepitaxial growth of InP layers on GaAs (001) wafers has been performed by solid-source molecular beam epitaxy assisted by monoatomic hydrogen (H*). The epitaxial growth has been carried out using a two-step method: for the initial stage of growth the temperature was as low as 200 deg. C and different doses of H* were used; after this, the growth proceeded without H* while the temperature was increased slowly with time. The incorporation of H* drastically increased the critical layer thickness observed by reflection high-energy electron diffraction; it also caused a slight increase in the luminescence at room temperature, while it also drastically changed the low-temperature luminescence related to the presence of stoichiometric defects. The samples were processed by rapid thermal annealing. The annealing improved the crystalline quality of the InP layers measured by high-resolution x-ray diffraction, but did not affect their luminescent behavior significantly.

36 MATERIALS SCIENCE↗

Study of the Structure of Cadmium-Sulfide Nanowire Crystals Synthesized by Vacuum Evaporation and Condensation in a Quasi-Closed Volume

The results of crystallinity studies of an ensemble of cadmium-sulfide nanowire crystals synthesized from the vapor phase in a quasi-closed volume are reported. The nanowires are from 10 nm to several micrometers in diameter and tens of millimeters in length. Electron diffraction and luminescence are studied. The diffraction patterns and micrographs are presented. The results suggest a high degree of crystallinity of the nanowires.

36 MATERIALS SCIENCE↗

Pulsed laser deposition of single layer, hexagonal boron nitride (white graphene, h-BN) on fiber-oriented Ag(111)/SrTiO{sub 3}(001)

We report on the growth of 1–10 ML films of hexagonal boron nitride (h-BN), also known as white graphene, on fiber-oriented Ag buffer films on SrTiO{sub 3}(001) by pulsed laser deposition. The Ag buffer films of 40 nm thickness were used as substitutes for expensive single crystal metallic substrates. In-situ, reflection high-energy electron diffraction was used to monitor the surface structure of the Ag films and to observe the formation of the characteristic h-BN diffraction pattern. Further evidence of the growth of h-BN was provided by attenuated total reflectance spectroscopy, which showed the characteristic h-BN peaks at ∼780 cm{sup −1} and 1367.4 cm{sup −1}. Ex-situ photoelectron spectroscopy showed that the surface of the h-BN films is stoichiometric. The physical structure of the films was confirmed by scanning electron microscopy. The h-BN films grew as large, sub-millimeter sheets with nano- and micro-sheets scattered on the surface. The h-BN sheets can be exfoliated by the micromechanical adhesive tape method. Spectral analysis was performed by energy dispersive spectroscopy in order to identify the h-BN sheets after exfoliation. The use of thin film Ag allows for reduced use of Ag and makes it possible to adjust the surface morphology of the thin film prior to h-BN growth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of iron addition on the oxygen-deficient Sr{sub 0.85}Bi{sub 0.15}Co{sub 1-x}Fe{sub x}O{sub 3-{delta}} (0.0{<=}x{<=}1.0) perovskites

A series of oxygen-deficient Sr{sub 0.85}Bi{sub 0.15}Co{sub 1-x}Fe{sub x}O{sub 3-{delta}} (0.0{<=}x{<=}1.0) perovskite phases were prepared using solid-state reaction. Results of neutron powder diffraction analyses show that the introduction of Fe onto the B-site severely effects the long range coherence of the oxygen vacancy ordered, I4/mmm supercell, observed for the x=0.0 sample. For x=0.1 a smaller, a=b{approx}a{sub p}, c{approx}2a{sub p}, P4/mmm supercell gives the best agreement to the diffraction data, whilst phases in the range 0.2{<=}x{<=}0.6 adopt disordered cubic perovskite structures. Pseudo-cubic, a=b{approx}a{sub p}, c{approx}a{sub p}, structures are found for x{>=}0.8. Evidence of weak superstructures, reflecting local oxygen ordering, is also obtained from electron diffraction. For all oxygen-annealed phases the average structure reverts to cubic Pm3-bar m. The as-prepared samples show G-type antiferromagnetic order at room temperature. The oxygen annealed x=0.10, 0.25 and 1.0 samples display low-temperature spin-glass transitions. - Graphical abstract: Evolving crystal structures of the as-prepared Sr{sub 0.85}Bi{sub 0.15}Co{sub 1-x}Fe{sub x}O{sub 3-{delta}} perovskites as a function of iron content for the compositional range 0.1{<=}x{<=}1.0.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial characterization and electrical properties of Ni–GaSb contacts

The microstructural characterization of Ni–GaSb junctions in samples annealed at 300 °C, 350 °C, and 400 °C in a N{sub 2} atmosphere was elucidated using transmission electron microscopy in conjunction with energy-dispersive spectrometry, nanobeam electron diffraction, and grazing-incident X-ray diffraction. Only the NiSb(Ga) phase is formed at the interface of Ni/GaSb when the annealing temperature is below 350 °C. However, three phases—NiSb, Ni{sub 2}Ga{sub 3}, and NiSb(Ga)—are formed simultaneously at the interface between Ni/GaSb when the annealing temperature is increased to 400 °C, which causes a significant increase in the sheet resistance of the Ni–GaSb alloy. These results indicate that the annealing temperature of the Ni/GaSb structure should be maintained below 350 °C for the formation of low-resistance metal Ni/GaSb contacts in GaSb-based p-type metal-oxide-semiconductor field-effect transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Environment of Nitrogen in N-doped Rutile TiO2(110)

We employ x-ray photoelectron spectroscopy (XPS), reflection high-energy electron diffraction (RHEED) and nuclear reaction analysis (NRA) to characterize the concentration-dependent structural properties of nitrogen doping into rutile TiO2. High quality N-doped TiO2 were prepared on rutile single crystal TiO2(110) substrates using plasma-assisted molecular beam epitaxy with an electron cyclotron resonance (ECR) plasma and Ti effusive sources. Films with N dopant concentrations at or below 2 at.% exhibited predominately substitutional doping based on NRA data, whereas films with concentrations above this limit resulted in little or no substitutional N and surfaces rich in Ti3+. The binding energy of the N 1s feature in XPS did not readily distinguish between these two extremes in N-doping, rendering features within 0.4 eV of each other and similar peak profiles. Although widely used to characterize the state of N in anion-doped TiO2 materials, we find that XPS is unsuitable for this task.

08 HYDROGEN↗