Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPANSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Continuum opacity produced by spectral lines in supernovae and similar expansions

Within rapidly expanding objects such as supernovae, the large velocity gradient Doppler spreads the spectral lines to such an extent that even relatively weak transitions affect the propagation of radiation. It is shown that under appropriate conditions (involving the separation between lines and the velocity gradient), the effects of many lines within a small frequency interval produce a contribution to the transfer equation which acts like an ordinary continuum opacity. This expansion opacity is a surprisingly simple function of the Sobolev optical depth of the lines. The dependence of this opacity on frequency, temperature, density, velocity gradient (1/time), and heavy element abundance is evaluated.

Wagoner, Robert V.↗
NASA NTRS1991

Optimal guidance of aero-assisted transfer vehicles based on matched asymptotic expansions

This paper addresses a number of issues related to the matched asymptotic expansions analysis of skip trajectories, or any class of problems that give rise to inner layers that are not associated directly with satisfying boundary conditions. The procedure for matching inner and outer solutions, and using the composite solution to satisfy boundary conditions is rigorously followed in developing a complete algebraic solution to the problem of inclination change with minimum energy loss. Repeated solution of these algebraic equations along the trajectory, treating each current state as an initial state, constitute a feedback guidance algorithm.

Calise, A. J.↗
NASA NTRS1991

High-Order Polynomial Expansions (HOPE) for flux-vector splitting

The Van Leer flux splitting is known to produce excessive numerical dissipation for Navier-Stokes calculations. Researchers attempt to remedy this deficiency by introducing a higher order polynomial expansion (HOPE) for the mass flux. In addition to Van Leer's splitting, a term is introduced so that the mass diffusion error vanishes at M = 0. Several splittings for pressure are proposed and examined. The effectiveness of the HOPE scheme is illustrated for 1-D hypersonic conical viscous flow and 2-D supersonic shock-wave boundary layer interactions.

Liou, Meng-Sing↗
NASA NTRS1992

An analysis of combustion studies in shock expansion tunnels and reflected shock tunnels

The effect of initial nonequilibrium dissociated air constituents on the combustion of hydrogen in high-speed flows for a simulated Mach 17 flight condition was investigated by analyzing the results of comparative combustion experiments performed in a reflected shock tunnel test gas and in a shock expansion tunnel test gas. The results were analyzed and interpreted with a one-dimensional quasi-three-stream combustor code that includes finite rate combustion chemistry. The results of this study indicate that the combustion process is kinetically controlled in the experiments in both tunnels and the presence of the nonequilibrium partially dissociated oxygen in the reflected shock tunnel enhances the combustion. Methods of compensating for the effect of dissociated oxygen are discussed.

Jachimowski, Casimir J.↗
NASA NTRS1992

Parametric investigation of single-expansion-ramp nozzles at Mach numbers from 0.60 to 1.20

An investigation was conducted in the Langley 16-Foot Transonic Tunnel to determine the effects of varying six nozzle geometric parameters on the internal and aeropropulsive performance characteristics of single-expansion-ramp nozzles. This investigation was conducted at Mach numbers from 0.60 to 1.20, nozzle pressure ratios from 1.5 to 12, and angles of attack of 0 deg +/- 6 deg. Maximum aeropropulsive performance at a particular Mach number was highly dependent on the operating nozzle pressure ratio. For example, as the nozzle upper ramp length or angle increased, some nozzles had higher performance at a Mach number of 0.90 because of the nozzle design pressure was the same as the operating pressure ratio. Thus, selection of the various nozzle geometric parameters should be based on the mission requirements of the aircraft. A combination of large upper ramp and large lower flap boattail angles produced greater nozzle drag coefficients at Mach number greater than 0.80, primarily from shock-induced separation on the lower flap of the nozzle. A static conditions, the convergent nozzle had high and nearly constant values of resultant thrust ratio over the entire range of nozzle pressure ratios tested. However, these nozzles had much lower aeropropulsive performance than the convergent-divergent nozzle at Mach number greater than 0.60.

Capone, Francis J.↗
NASA NTRS1990

Chronological evaluation of urban growth and area expansion in Aguascalientes, Mexico using remotely sensed and ancillary mapped data

The study describes some efforts to assist the mapping procedure of Mexican towns and cities by focusing on the analysis of urban changes that have occurred in the city of Aguascalientes. To evaluate urban growth trends in Aguascalientes, historic maps of land cover, aerial photography, and SPOT data were reviewed between the period of 1857 and 1988 to determine urban boundaries. Additional analyses focused on identifying the extent and pattern of growth in reference to urban development plans initiated in 1978, and on assessing the impact of relocating people and industry after the Mexico City earthquake. Results from the study indicate a steady growth in areal expansion and population in the Aguascalientes area between 1978 and 1988.

Falquier, Leticia G.↗
NASA NTRS1992

Single expansion ramp nozzle simulations

The single-expansion-ramp-nozzle (SERN) experiment underway at NASA Ames Research Center simulates the National Aerospace Plane propulsive jet-plume flow. Recently, limited experimental data has become available from an experiment with a generic nozzle/afterbody model in a hypersonic wind tunnel. The present paper presents full three-dimensional solutions obtained with the implicit Navier-Stokes solver, FL3D, for the baseline model and a version of the model with side extensions. Analysis of the computed flow clearly shows the complex 3-D nature of the flow, critical flow features, and the effect of side extensions on the plume flow development. Flow schematics appropriate for the conditions tested are presented for the baseline model and the model with side extensions. The computed results show excellent agreement with experimental shadowgraph and with surface pressure measurements. The computed and experimental surface oil-flows show the same features but may be improved by appropriate turbulence modeling.

Ruffin, Stephen M.↗
NASA NTRS1992

Low coefficient of thermal expansion polyimides containing metal ion additives

Polyimides have become widely used as high performance polymers as a result of their excellent thermal stability and toughness. However, lowering their coefficient of thermal expansion (CTE) would increase their usefulness for aerospace and electronic applications where dimensional stability is a requirement. The incorporation of metal ion-containing additives into polyimides, resulting in significantly lowered CTE's, has been studied. Various metal ion additives have been added to both polyamic acid resins and soluble polyimide solutions in the concentration range of 4-23 weight percent. The incorporation of these metal ions has resulted in reductions in the CTE's of the control polyimides of 12 percent to over 100 percent depending on the choice of additive and its concentration.

Stoakley, D. M.↗
NASA NTRS1993

Clamshell Thermal-Expansion Bellows

Improved bellows serves as thermal-expansion joint in vacuum-jacketed cyrogenic piping system. Made of Hastelloy C-22 and fabricated in field by welding two clam-shell-like half bellows. No protective paint or maintenance needed. Design modified to fit most thin-wall bellows.

Fesmire, J.↗
NASA NTRS1993

Thermal Conductivity And Expansion Of Graphite/Copper

Report describes fabrication of graphite-fiber/copper-matrix composite plates, measurements of thermal conductivities of plates at temperatures from ambient to 1,073 K, and measurements of thermal expansions of plates from ambient temperature to 1,050 K. Composites promising lightweight, high-thermal-conductivity materials proposed for use in heat exchangers and other heat-transfer components of power systems in spacecraft and hypersonic aircraft. Graphite/copper also of interest as model composite material.

Mcdanels, David L.↗
NASA NTRS1992

Resonance lamp absorption measurement of OH number density and temperature in expansion tube scramjet engine tests

In this paper, we report results of hydroxyl radical and static temperature measurements performed in the General Applied Science Laboratories-NASA HYPULSE expansion tube facility using the microwave resonance lamp absorption technique. Data were obtained as part of a series of hydrogen/air and hydrogen/oxygen combustion tests at stagnation enthalpies corresponding to Mach 17 flight speeds. Data from a representative injector configuration is compared to a full Navier-Stokes CFD solution.

Lempert, Walter R.↗
NASA NTRS1993

Wigner expansions for partition functions of nonrelativistic and relativistic oscillator systems

The equilibrium quantum statistics of various anharmonic oscillator systems including relativistic systems is considered within the Wigner phase space formalism. For this purpose the Wigner series expansion for the partition function is generalized to include relativistic corrections. The new series for partition functions and all thermodynamic potentials yield quantum corrections in terms of powers of h(sup 2) and relativistic corrections given by Kelvin functions (modified Hankel functions) K(sub nu)(mc(sup 2)/kT). As applications, the symmetric Toda oscillator, isotonic and singular anharmonic oscillators, and hindered rotators, i.e. oscillators with cosine potential, are addressed.

Zylka, Christian↗
NASA NTRS1993

Ionization and expansion of barium clouds in the ionosphere

A recently envelope 3D model is used here to study the motion of the barium clouds released in the ionosphere, including the ionization stage. The ionization and the expansion of the barium clouds and the interaction between the clouds and the background ions are investigated using three simulations: a cloud without a directional velocity, a cloud with an initial velocity of 5 km/s across the B field, and a cloud with initial velocity components of 2 km/s both along and across the B field.

Ma, T.-Z.↗
NASA NTRS1993

Fundamental issues in subsonic/transonic expansion corner aerodynamics

While the characteristics of subsonic/transonic expansion-corner aerodynamics are important in the design of subsonic high-lift devices, these must be optimized for transonic cruise and maneuvering flight. Attention is presently given to illustrative experimental examples of these flow phenomena; a flowfield model has been used as the basis of such flows' consideration, and computational examples are used to express these flows' essential features.

Mason, W. H.↗
NASA NTRS1992

Thermally induced changes in the focal distance of composite mirrors - Composites with a zero coefficient of thermal expansion of the radius of curvature

Calculations are presented of the coefficient of thermal expansion (CTE) of the radius of curvature of the reflector face sheets made of a quasi-isotropic composite. It is shown that, upon cooling, the change of the CTE of the focal distance of the mirror is equal to that of the radius of the curvature of the reflector face sheet. The CTE of the radius of the curvature of a quasi-isotropic composite face sheet depends on both the in-plane and the out-of-plane CTEs. The zero in-plane CTE of a face sheet does not guarantee mirrors with no focal length changes.

Dolgin, Benjamin P.↗
NASA NTRS1993

Equatorward and poleward expansion of the auroras during auroral substorms

The formation of the auroral bulge is investigated on the basis of all-sky TV auroral data with high spatial and temporal resolution. Ways in which the discrete auroral structures within the poleward expanding bulge develop systematically toward the west, the east, and also equatorward from a localized breakup region are shown. Auroral structure at the western end of the bulge (a surge) develops with clockwise rotation as viewed along the magnetic field direction. At the eastern part of the bulge, thin auroral features propagate eastward from the breakup region. Around the central meridian of the bulge, auroral features expand equatorward and become north-south aligned (the N-S aurora). The N-S aurora and the eastward propagating aurora develop into diffuse and pulsating aurora after the expansion. It is suggested that these discrete auroral structures in the bulge develop along the plasma streamlines in a localized distorted two-cell equipotential distribution.

Nakamura, Rumi↗
NASA NTRS1992

Effects of changes in composite lamina properties on laminate coefficient of thermal expansion

An analytical study of the effects of changes in composite lamina properties on the laminate coefficient of thermal expansion, CTE, has been made. Low modulus graphite/epoxy (T300/934) and high modulus graphite/epoxy (P75/934, P100/934, P120/934), graphite/aluminum (P100/Al), and graphite/glass (HMS/Gl) composite materials were considered in quasi-isotropic and near-zero CTE laminate configurations. The effects of changes in lamina properties on the laminate CTE strongly depend upon the type of composite material as well as the laminate configuration. A 10 percent change in the lamina transverse CTE resulted in changes as large as 0.22 ppm/C in the laminate CTE of a quasi-isotropic Gr/934 laminates. No significant differences were observed in the sensitivities of the laminate CTEs of the P100/934 and P120/934 composite materials due to identical changes in lamina properties. Large changes in laminate CTE can also result from measured temperature and radiation effects on lamina properties.

Tompkins, Stephen S.↗