Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Drive systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Energy conservation and the chiral magnetic effect

We analyze the chiral magnetic effect in a homogeneous neutral plasma from the point of view of energy conservation, and construct an effective potential for the growth of maximally helical perturbations of the electromagnetic field. We show that a negative curvature at the origin of the potential, indicating instability of the plasma, is induced by a chiral asymmetry in electron Fermi energy, as opposed to number density, while the potential grows at large field value. It follows that the ground state for a plasma has zero magnetic helicity; a nonzero electron mass will allow an excited state of a plasma with nonzero helicity to relax to that ground state quickly. We conclude that a chiral plasma instability triggered by weak interactions is not a viable mechanism for explaining magnetic fields in stars except possibly when dynamics drives the system far from equilibrium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Matter-Wave Emission in Optical Lattices: Single Particle and Collective Effects

We introduce a simple setup corresponding to the matter-wave analogue of impurity atoms embedded in a photonic crystal and interacting with the radiation field. Atoms in a given internal level are trapped in an optical lattice, and play the role of the impurities. Atoms in an untrapped level play the role of the radiation field. The interaction is mediated by means of lasers that couple those levels. By tuning the lasers parameters, it is possible to drive the system through different regimes, and observe phenomena such as matter-wave superradiance, non-Markovian atom emission, and the appearance of bound atomic states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Occupation Statistics of a Bose-Einstein Condensate for a Driven Landau-Zener Crossing

We consider an atomic Bose-Einstein condensate loaded in a biased double-well trap with tunneling rate K and interatomic interaction U. The Bose-Einstein condensate is prepared such that all N atoms are in the left well. We drive the system by sweeping the potential difference E between the two wells. Depending on the interaction u=NU/K and the sweep rate E, we distinguish three dynamical regimes: adiabatic, diabatic, and sudden and consider the occupation statistics of the final state. The analysis goes beyond mean-field theory and is complemented by a semiclassical picture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polarization-Driven Topological Insulator Transition in a GaN/InN/GaN Quantum Well

Topological insulator (TI) states have been demonstrated in materials with a narrow gap and large spin-orbit interactions (SOI). Here we demonstrate that nanoscale engineering can also give rise to a TI state, even in conventional semiconductors with a sizable gap and small SOI. Based on advanced first-principles calculations combined with an effective low-energy k∙p Hamiltonian, we show that the intrinsic polarization of materials can be utilized to simultaneously reduce the energy gap and enhance the SOI, driving the system to a TI state. The proposed system consists of ultrathin InN layers embedded into GaN, a layer structure that is experimentally achievable.

bio-inspired↗

Interplay of Chiral and Helical States in a Quantum Spin Hall Insulator Lateral Junction

Here, we study the electronic transport across an electrostatically-gated lateral junction in a HgTe quantum well, a canonical 2D topological insulator, with and without applied magnetic field. We control carrier density inside and outside a junction region independently and hence tune the number and nature of 1D edge modes propagating in each of those regions. Outside the 2D gap, magnetic field drives the system to the quantum Hall regime, and chiral states propagate at the edge. In this regime, we observe fractional plateaus which reflect the equilibration between 1D chiral modes across the junction. As carrier density approaches zero in the central region and at moderate fields, we observe oscillations in resistance that we attribute to Fabry-Perot interference in the helical states, enabled by the broken time reversal symmetry. At higher fields, those oscillations disappear, in agreement with the expected absence of helical states when band inversion is lifted.

36 MATERIALS SCIENCE↗

Modification of spin-ice physics in Ho 2 Ti 2 O 7 thin films

We present an extensive study on the effect of substrate orientation, strain, stoichiometry, and defects on spin-ice physics in Ho 2 Ti 2 O 7 thin films grown onto yttria-stabilized-zirconia substrates. We find that growth in different orientations produces different strain states in the films. All films exhibit similar c -axis lattice parameters for their relaxed portions, which are consistently larger than the bulk value of 10.1 Å. Transmission electron microscopy reveals antisite disorder and growth defects to be present in the films, but evidence of stuffing is not observed. The amount of disorder depends on the growth orientation, with the (110) film showing the least. Magnetization measurements at 1.8 K show the expected magnetic anisotropy and saturation magnetization values associated with a spin ice for all orientations; shape anisotropy is apparent when comparing in- and out-of-plane directions. Significantly, only the (110)-oriented films display the hallmark spin-ice plateau state in magnetization, albeit less well defined compared to the plateau observed in a single crystal. Neutron-scattering maps on the more disordered (111)-oriented films show the Q=0 phase previously observed in bulk materials, but the Q=X phase giving the plateau state remains elusive. We conclude that the spin-ice physics in thin films is modified by defects and strain, leading to a reduction in the temperature at which correlations drive the system into the spin-ice state.

36 MATERIALS SCIENCE↗

Spirals and skyrmions in antiferromagnetic triangular lattices

In this work, we study realizations of spirals and skyrmions in two-dimensional antiferromagnets with a triangular lattice on an inversion-symmetry-breaking substrate. As a possible material realization, we investigate the adsorption of transition-metal atoms (Cr, Mn, Fe, or Co) on a monolayer of MoS 2 , WS 2 , or WSe 2 and obtain the exchange, anisotropy, and Dzyaloshinskii-Moriya interaction parameters using first-principles calculations. Using energy minimization and parallel-tempering Monte Carlo simulations, we determine the magnetic phase diagrams for a wide range of interaction parameters. We find that skyrmion lattices can appear even with weak Dzyaloshinskii-Moriya interactions, but their stability is hindered by magnetic anisotropy. However, a weak easy plane magnetic anisotropy can be beneficial for stabilizing the skyrmion phase. Our results suggest that Cr/MoS 2 , Fe/MoS 2 , and Fe/WSe 2 interfaces can host spin spirals formed from the 120 degrees antiferromagnetic states. Our results further suggest that for interfaces, such as Fe/MoS 2 , the Dzyaloshinskii-Moriya interaction is strong enough to drive the system into a three-sublattice skyrmion lattice in the presence of experimentally feasible external magnetic field.

36 MATERIALS SCIENCE↗

Emergent Inductance from Chiral Orbital Currents in a Bulk Ferrimagnet

Here, we report the discovery of a new form of inductance in the bulk ferrimagnet Mn 3 ⁢Si 2 ⁢Te 6 , which features strong spin-orbit coupling, large magnetic anisotropy, and pronounced magnetoelastic interactions. Below its Curie temperature (𝑇 𝐶 ≈ 78 K), Mn 3 ⁢Si 2 ⁢Te 6 hosts chiral orbital currents (COC) that circulate within the crystal lattice and give rise to collective electronic behavior [Control of chiral orbital currents in a colossal magnetoresistance material, Nature (London) 611, 467 (2022).]. By applying a magnetic field along the hard 𝑐 axis and driving the system with low-frequency currents, we uncover a giant inductive response up to millhenry scale, originating from first-order reconfigurations of COC domains. These domains act as coherent mesoscopic inductive elements that resist reversal upon current reduction, producing a large electromotive force and sharply increasing voltage. This emergent inductance defies classical models, occurs without superconductivity or engineered nanostructures, and opens a new frontier in orbital-based quantum functionality and device concepts.

complex materials↗

On the effect of Ga and In substitutions in the Ca 11 Bi 10 and Yb 11 Bi 10 bismuthides crystallizing in the tetragonal Ho 11 Ge 10 structure type

The Ga- and In-substituted bismuthides Ca 11 Ga x Bi 10– x , Ca 11 In x Bi 10– x , Yb 11 Ga x Bi 10– x , and Yb 11 In x Bi 10– x ( x < 2) can be readily synthesized employing molten Ga or In metals as fluxes. They crystallize in the tetragonal space group I 4/ mmm and adopt the Ho 11 Ge 10 structure type (Pearson code tI 84; Wyckoff sequence n 2 m j h 2 e 2 d ). The structural response to the substitution of Bi with smaller and electron-poorer In or Ga has been studied by single-crystal X-ray diffraction methods for the case of Ca 11 In x Bi 10– x [ x = 1.73 (2); octabismuth undecacalcium diindium]. The refinements show that the In atoms substitute Bi only at the 8 h site. The refined interatomic distances show an unconventional – for this structure type – bond-length distribution within the anionic sublattice. The latter can be viewed as consisting of isolated Bi 3- anions and [In 4 Bi 8 20- ] clusters for the idealized Ca 11 In 2 Bi 8 model. Formal electron counting and first-principle calculations show that the peculiar bonding in this compound drives the system toward an electron-precise state, thereby stabilizing the observed bond-length pattern.

Chemistry↗

Adaptive Dynamic Digital Twin for Test Scenario Generation

Vehicle testing has been an important part in the development of both highly automated vehicles (HAV) and advanced driving assistant systems (ADAS). Obtaining a good representation of the Vehicle Under Test (VUT) is crucial for test scenario library generation (TSLG). Current vehicle testing methods often involve calibrating car-following models using vehicle trajectory data to create static representations that cannot be dynamically updated. For instance, when multiple vehicle trajectories are collected, it is difficult to automatically determine whether a new trajectory improves the model's representativeness or degrades its accuracy. In this paper, we introduce a dynamically updated digital twin modeling framework featuring an adaptive mechanism that evaluates new trajectory data. This mechanism can decide whether to incorporate newly collected data into the current model or create a separate digital twin model when the trajectory significantly differs from prior data. Vehicle location, speed, and acceleration extracted from the newly collected trajectory data are used to support the dynamic update decision. By integrating this digital twin model into the test library generation process, we demonstrate its ability to assist in generating test libraries while effectively handling newly collected data.

Chen, Hanlin [ORNL] (ORCID:0000000165087715)↗

Giant coercivity and enhanced intrinsic anomalous Hall effect at vanishing magnetization in a compensated kagome ferrimagnet

Ferrimagnets that can be driven to magnetic compensation show promise for use in spintronics as they exhibit a finite anomalous Hall effect at zero magnetic field without having a substantial magnetic moment. Compensated ferrimagnet spintronic devices with both a large anomalous Hall effect and a high coercivity would be simultaneously easy to read and difficult to erase. The kagome ferrimagnet TbMn 6 Sn 6 has been reported to host a large intrinsic anomalous Hall effect. Here, we demonstrate that doping the Mn sites with Cr drives the system toward magnetic compensation. For nearly compensated compositions at low temperatures, giant coercive fields exceeding 14 T are observed. Additionally, Cr doping markedly enhances the intrinsic anomalous Hall effect, which can be attributed to a shift in the Fermi level. Our results extend the range of unique magnetic states observed in kagome materials, demonstrating that chemical doping is an effective strategy to tune and realize these states.

DeStefano, Jonathan M. [Univ. of Washington, Seatt↗

Parallel Infrastructure Modeling and Inversion Module for E4D

Electrical resistivity tomography ERT is a method of imaging the electrical conductivity of the subsurface. Electrical conductivity is a useful metric for understanding the subsurface because it is governed by geomechanical and geochemical properties that drive subsurface systems. ERT works by injecting current into the subsurface across a pair of electrodes, and measuring the corresponding electrical potential response across another pair of electrodes. Many such measurements are strategically taken across an array of electrodes to produce an ERT data set. These data are then processed through a computationally demanding process known as inversion to produce an image of the subsurface conductivity structure that gave rise to the measurements. Data can be inverted to provide 2D images, 3D images, or in the case of time-lapse 3D imaging, 4D images. ERT is generally not well suited for environments with buried electrically conductive infrastructure such as pipes, tanks, or well casings, because these features tend to dominate and degrade ERT images. This reduces or eliminates the utility of ERT imaging where it would otherwise be highly useful for, for example, imaging fluid migration from leaking pipes, imaging soil contamination beneath leaking subsurface tanks, and monitoring contaminant migration in locations with dense network of metal cased monitoring wells. The location and dimension of buried metallic infrastructure is often known. If so, then the effects of the infrastructure can be explicitly modeled within the ERT imaging algorithm, and thereby removed from the corresponding ERT image. However, there are a number of obstacles limiting this application. 1) Metallic infrastructure cannot be accurately modeled with standard codes because of the large contrast in conductivity between the metal and host material. 2) Modeling infrastructure in true dimension requires the computational mesh to be highly refined near the metal inclusions, which increases computational demands. 3) The ERT imaging algorithm requires specialized modifications to accommodate high conductivity inclusions within the computational mesh. The solution to each of these challenges was implemented within E4D (formerly FERM3D), which is a parallel ERT imaging code developed at PNNL (IPID #30249). The infrastructure modeling module implement in E4D uses a method of decoupling the model at the metallic interface(s) boundaries, into several well posed sub-problems (one for each distinct metallic inclusion) that are subsequently solved and recombined to form the global solution. The approach is based on the immersed interface method, with has been applied for similar problems in other fields (e.g. semiconductor industry). Comparisons to analytic solutions have shown the results to be very accurate, addressing item 1 above. The solution is implemented about an unstructured mesh, which enables arbitrary shapes to be efficiently modelled, thereby addressing item 2 above. In addition, the algorithm is written in parallel and shows excellent scalability, which also addresses equation 2 above. Finally, because only the boundaries of metallic inclusions are modeled, there are no high conductivity cells within the modeling mesh, and the problem described by item 3 above is no longer applicable.

Johnson, TimC.↗

HIGH CURRENT HIGH CHARGE MAGNETIZED AND BUNCHED ELEC-TRON BEAM FROM A DC PHOTOGUN FOR JLEIC COOLER

A high current, high charge magnetized electron beam-line was developed for fast and efficient cooling of ion beams for the proposed Jefferson Lab Electron Ion Col-lider (JLEIC). In this paper, we describe recent achieve-ments that include the generation of picosecond-bunch magnetized beams at average currents up to 28 mA with exceptionally long photocathode lifetime, and independent demonstrations of magnetized beam with high bunch charge up to 700 pC at 10s of kHz repetition rates. In addition, a detailed description of an extremely stable and reliable fiber-based drive laser system that employs a gain-switched master oscillator is presented. These ac-complishments mark important steps toward demonstrat-ing the feasibility of a technically challenging JLEIC cooler design using magnetized beams

Adderley, P.↗

Detecting Passing Valves at Scale Across Different Buildings and Systems: A Brick Enabled and Mortar Tested Application

Heating hot water distribution systems are typically used in commercial buildings to condition spaces to provide occupant thermal comfort. However, recent research shows significant distribution losses within these systems that drive down the overall hot water plant efficiency. This research focuses on detecting passing valves in reheat coils found in variable air volume (VAV) terminal units to reduce distribution losses. A passing valve allows hot water flow when the actuator on the valve is commanded to be closed. The fluid causes unintentional heating or cooling to occur, causing comfort and control issues, and wasting energy. We developed the passing valve detection algorithm using a framework based on the Brick schema and Mortar platform to ensure that the application is portable and can scale to many buildings. We applied the same application to analyze 1,335 VAV reheat terminal units in 20 buildings. The diversity found in these large datasets increases confidence that any building with VAV reheat terminal units with the required sensors and Brick data model can run our open-source algorithm with little or no modification. In aggregate, 5% of VAV units analyzed were categorized as having a sensor fault, 14% with potential passing valve fault, and 81% with no faults detected. However, there is a significant variation in the proportion of VAV units with a passing valve detected (1% to 83%) of each building’s analyzed units.

Roa, Carlos Duarte↗

What have we learned from the LCLS injector?

The LCLS injector reliably delivered a high quality electron beam since it started operations three years ago. Some initial commissioning results were described in Ref. [1]. This note is to summarize what we have understood from the LCLS injector including drive laser, cathode, RF gun, injector beam line elements, beam modeling and operations. What we have learned during the LCLS injector commissioning and operation has lead to modified specifications for the UV drive laser system. A flat temporal profile originally required in the LCLS design is not necessary to achieve a low emittance electron beam for the LCLS operations. According to our recent studies, a laser pulse with 3 ps Gaussian temporal profile (FWHM) can achieve a similar emittance compared to a flat temporal profile laser. The sensitivity of the emittance to the laser pulse length at 250 pC of bunch charge was studied, as shown in Figure 1. Only slight variations were observed for both projected and time-sliced emittances with laser pulses from 2.2 ps to 4.5 ps FWHM. Space charge forces certainly become weak but RF emittance which is proportional to the bunch length square increases due to the longer laser pulse. Thus, the projected emittance optimum may be a trade-off between space charge forces and RF emittance, while the time-sliced emittance determined by space charge forces may be slightly improved with a longer laser pulse length. Simulations and theory also show that spatial Gaussian-cut laser profile produces a better emittance compared to uniform profiles due to increased linearity of the space charge forces. Preliminary experimental data show that the emittance with a Gaussian-cut is almost as good as the one with uniform although not better than. In addition, the laser transmission through the iris for spatial Gaussian-cut is about twice the one for spatial uniform. More experimental studies with the new Coherent laser system are needed to make a more solid conclusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quench from Mott Insulator to Superfluid

We study a linear ramp of the nearest-neighbor tunneling rate in the Bose-Hubbard model driving the system from the Mott insulator state into the superfluid phase. We employ the truncated Wigner approximation to simulate linear quenches of a uniform system in 1...3 dimensions, and in a harmonic trap in 3 dimensions. In all these setups the excitation energy decays like one over third root of the quench time. The -1/3 scaling is explained by an impulse-adiabatic approximation - a variant of the Kibble-Zurek mechanism - describing a crossover from non-adiabatic to adiabatic evolution when the system begins to keep pace with the increasing tunneling rate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Proton acceleration by relativistic self-guided laser pulses

Energetic protons and ions can be produced by the irradiation of a μm-thick solid target with an intense laser pulse via Target Normal Sheath Acceleration (TNSA). Typically the maximum proton energy increases with decreasing target thickness. However, amplified spontaneous emission (ASE) from the drive laser system may alter thinner targets before arrival of the main pulse and limit the attainable proton energy. Here we experimentally test a method of reducing ASE intensity and increasing TNSA proton energy by using relativistic self-guiding in an underdense plasma.

42 ENGINEERING↗

Medium Duty Electric Vehicle Demonstration Project

The Smith Electric Vehicle Demonstration Project (SDP) was integral to the Smith business plan to establish a manufacturing base in the United States (US) and produce a portfolio of All Electric Vehicles (AEV’s) for the medium duty commercial truck market. Smith focused on the commercial depot based logistics market, as it represented the market that was most ready for the early adoption of AEV technology. The SDP enabled Smith to accelerate its introduction of vehicles and increase the size of its US supply chain to support early market adoption of AEV’s that were cost competitive, fully met the needs of a diverse set of end users and were compliant with Federal safety and emissions requirements. The SDP accelerated the development and production of various electric drive vehicle systems to substantially reduce petroleum consumption, reduce vehicular emissions of greenhouse gases (GHG), and increase US jobs.

Mackie, Robin J. D.↗