Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Digitalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Use of a digital tone extractor for real-time phase analysis

A digital tone extractor which monitors the phase integrity of a VLBI recording system in real time was developed. The digital tone extractor monitors phase calibrator tones injected at the antenna and tracks their phase as a function of time. It is capable of maintaining 0.001 cycle phase accuracy over the course of a VLBI experiment in accordance with the accuracy requirements of centimeter VLBI work. This real time VLBI system monitor is a safeguard against most instrumental breakdowns and operator errors.

Sigman, E.↗
NASA NTRS1980

Mark 3 wideband digital recorder in perspective

The tape recorder used for the Mark 3 data acquisition and processing system is compared with earlier very long baseline interferometry recorders. Wideband 33-1/3 kbpi digital channel characteristics of instrumentation recorders and of a modern video cassette recorder are illustrated. Factors which influenced selection of the three major commercial components (transport, heads, and tape) are discussed. A brief functional description and the reasons for development of efficient signal electronics and necessary auxiliary control electronics are given. The design and operation of a digital bit synchronizer is illustrated as an example of the high degree of simplicity achieved.

Hinteregger, H. F.↗
NASA NTRS1980

Digital recording acquisition subsystem for radio interferometry applications implementation plan

The digital recording acquisition subsystem (DRAS) is a wideband digital recording system that can accommodate data sample rates from 0.125 to 8 MHz in binary increments. The implementation of the DRAS for radio interferometry applications in support of the Crustal Dynamics Project is described. The functional and performance characteristics of the equipment and the key aspects of the implementation plan are discussed.

Kapoor, V. B.↗
NASA NTRS1979

Error detection and rectification in digital terrain models

Digital terrain models produced by computer correlation of stereo images are likely to contain occasional gross errors in terrain elevation. These errors typically result from having mismatched sub-areas of the two images, a problem which can occur for a variety of image- and terrain-related reasons. Such elevation errors produce undesirable effects when the models are further processed, and should be detected and corrected as early in the processing as possible. Algorithms have been developed to detect and correct errors in digital terrain models. These algorithms focus on the use of constraints on both the allowable slope and the allowable change in slope in local areas around each point. Relaxation-like techniques are employed in the iteration of the detection and correction phases to obtain best results.

Hannah, M. J.↗
NASA NTRS1980

A quadratic analog-to-digital converter

An analog-to-digital converter with a square root transfer function has been developed for use with a pair of CCD imaging detectors in the White Light Coronagraph/X-ray XUV Telescope experiment to be flown as part of the Internal Solar Polar Mission. It is shown that in background-noise-limited instrumentation systems a quadratic analog-to-digital converter will allow a maximum dynamic range with a fixed number of data bits. Low power dissipation, moderately fast conversion time, and reliability are achieved in the proposed design using standard components and avoiding nonlinear elements.

Harrison, D. C.↗
NASA NTRS1980

The digital implementation of control compensators - The coefficient wordlength issue

There exist a number of mathematical procedures for designing discrete-time compensators. However, the digital implementation of these designs, with a microprocessor, for example, has not received nearly as thorough an investigation. The finite-precision nature of the digital hardware makes it necessary to choose a computational structure that will perform adequately with regard to the initial objectives of the design. This paper describes a procedure for estimating the required fixed-point coefficient wordlength for any given computational structure for the implementation of a single-input single-output LQG design. The results are compared to the actual number of bits necessary to achieve a specified performance index.

Moroney, P.↗
NASA NTRS1979

A method for the processing and analysis of digital terrain elevation data

A method is presented for the processing and analysis of digital topography data that can subsequently be entered in an interactive data base in the form of slope, slope length, elevation, and aspect angle. A discussion of the data source and specific descriptions of the data processing software programs are included. In addition, the mathematical considerations involved in the registration of raw digitized coordinate points to the UTM coordinate system are presented. Scale factor considerations are also included. Results of the processing and analysis are illustrated using the Shiprock and Gallup Quadrangle test data.

Junkin, B. G.↗
NASA NTRS1980

Digital numerically controlled oscillator

The frequency and phase of an output signal from an oscillator circuit are controlled with accuracy by a digital input word. Positive and negative alterations in output frequency are both provided for by translating all values of input words so that they are positive. The oscillator reference frequency is corrected only in one direction, by adding phase to the output frequency of the oscillator. The input control word is translated to a single algebraic sign and the digital 1 is added thereto. The translated input control word is then accumulated. A reference clock signal having a frequency at an integer multiple of the desired frequency of the output signal is generated. The accumulated control word is then compared with a threshold level. The output signal is adjusted in a single direction by dividing the frequency of the reference clock signal by a first integer or by an integer different from the first integer.

Cellier, A.↗
NASA NTRS1981

Description of a digital computer simulation of an Annular Momentum Control Device (AMCD) laboratory test model

A description of a digital computer simulation of an Annular Momentum Control Device (AMCD) laboratory model is presented. The AMCD is a momentum exchange device which is under development as an advanced control effector for spacecraft attitude control systems. The digital computer simulation of this device incorporates the following models: six degree of freedom rigid body dynamics; rim warp; controller dynamics; nonlinear distributed element axial bearings; as well as power driver and power supply current limits. An annotated FORTRAN IV source code listing of the computer program is included.

Woolley, C. T.↗
NASA NTRS1981

An introduction to the interim digital SAR processor and the characteristics of the associated Seasat SAR imagery

Basic engineering data regarding the Interim Digital SAR Processor (IDP) and the digitally correlated Seasat synthetic aperature radar (SAR) imagery are presented. The correlation function and IDP hardware/software configuration are described, and a preliminary performance assessment presented. The geometric and radiometric characteristics, with special emphasis on those peculiar to the IDP produced imagery, are described.

Wu, C.↗
NASA NTRS1980

Appendix E: Research papers. Manual versus digital LANDSAT analysis for modeling river flooding

The comparative value of manual versus digital image analysis for determining flood boundaries is being examined in a study of the use of LANDSAT data for modeling flooding of the Black River, in northern New York. The work is an extension of an earlier study in which Black River flooding was assessed through visually interpreted, multi-date LANDSAT band 7 images. Based on the results to date, it appears that neither color-additive viewing nor digital analysis of LANDSAT data provide improvement in accuracy over visual analysis of band 7 images, for delineating the boundaries of flood-affected areas.

Philipson, W. R.↗
NASA NTRS1981

Development of a ground signal processor for digital synthetic array radar data

A modified APQ-102 sidelooking array radar (SLAR) in a B-57 aircraft test bed is used, with other optical and infrared sensors, in remote sensing of Earth surface features for various users at NASA Johnson Space Center. The video from the radar is normally recorded on photographic film and subsequently processed photographically into high resolution radar images. Using a high speed sampling (digitizing) system, the two receiver channels of cross-and co-polarized video are recorded on wideband magnetic tape along with radar and platform parameters. These data are subsequently reformatted and processed into digital synthetic aperture radar images with the image data available on magnetic tape for subsequent analysis by investigators. The system design and results obtained are described.

Griffin, C. R.↗
NASA NTRS1980

Conference on Applications of Digital Image Processing to Astronomy, Pasadena, Calif., August 20-22, 1980, Proceedings

The astronomic applications of non-military digital image processing are covered in this conference volume. Systems like CCD's, interactive data analysis facilities, stellar speckle interferometry, sky flux subsystems, guide star systems and various image processing systems are described. Techniques in photometry including filtering, automatic photometry, and image restoration are examined. Digital spectral analyses of galaxies, supernova remnants, stars and other celestial bodies are discussed together with algorithms developed to calibrate, clean up, enhance, and quantitatively analyze data. The techniques of image processing permit astronomers to make much more efficient use of their data for both subjective and quantitative analyses. Future missions, such as the Space Telescope, representing a vast data base are briefly covered.

Elliott, D. A.↗
NASA NTRS1980

Artifacts in digital images

Three kinds of artifacts unique to digital images are illustrated, namely aliasing caused by undersampling, interference phenomena caused by improper display of images, and harmonic overtones caused by quantization of amplitudes. Special attention is given to undersampling when the sample size and interval are the same. It is noted that this situation is important because it is typical of solid-state cameras. Quantization of image data of necessity introduces energy at harmonic overtones of the image spectrum. This energy is aliased if the frequency of the overtones is greater than 0.5 cycle/pixel. It cannot be selectively removed from the image through filtering, and the best way to suppress it is to maximize the amplification of the sensor before digital encoding.

Lorre, J. J.↗
NASA NTRS1981

Manual versus digital Landsat analysis for modeling river flooding

The comparative value of manual versus digital image analysis for determining flood boundaries is being examined in a study of the use of Landsat data for modeling flooding of the Black River, in northern New York. The work is an extension of an earlier study in which Black River flooding was assessed through visually interpreted, multi-date Landsat band 7 images. Based on the results to date, it appears that neither color-additive viewing nor digital analysis of Landsat data provide improvement in accuracy over visual analysis of band 7 images, for delineating the boundaries of flood-affected areas.

Philipson, W. R.↗
NASA NTRS1981

Application of digital terrain data to quantify and reduce the topographic effect on Landsat data

Landsat multispectral scanner (MSS) data are integrated with 30 m US Geological Survey digital terrain data to quantify and reduce topographic effects on imagery of a forested mountain ridge in central Pennsylvania. Spectral band ratioing slightly decreased variation of Landsat data for 50% of the transects and could not eliminate direct-light topographic effects. A Lambertian model increased topographic effect, and a modified Lambertian model decreased variation produced by the original model, but gave higher variances than found in the raw Landsat data. A non-Lambertian model, however, decreased variation by 86%, reducing topographic effects. The study demonstrated that high quality digital terrain data can be used to develop and test improved radiative transfer models, and enhance the utility of MSS data.

Justice, C. O.↗
NASA NTRS1981

Applications of digital image analysis capability in Idaho

The use of digital image analysis of LANDSAT imagery in water resource assessment is discussed. The data processing systems employed are described. The determination of urban land use conversion of agricultural land in two southwestern Idaho counties involving estimation and mapping of crop types and of irrigated land is described. The system was also applied to an inventory of irrigated cropland in the Snake River basin and establishment of a digital irrigation water source/service area data base for the basin. Application of the system to a determination of irrigation development in the Big Lost River basin as part of a hydrologic survey of the basin is also described.

Johnson, K. A.↗