Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Description”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

A brief description of the Jameson-Caughey NYU transonic swept-wing computer program: FLO 22

A computer program for analyzing inviscid, isentropic, transonic flow past 3-D swept configurations is presented. Some basic aspects of the program are: (1) the free-stream Mach number is restricted only by the isentropic assumption; (2) weak shock waves are automatically located wherever they occur in the flow; (3) the finite-difference form of the full equation for the velocity potential is solved by the method of relaxation, after the flow exterior to the airfoil is mapped to the upper half plane; (4) the mapping procedure allows exact satisfaction of the boundary conditions and use of supersonic free stream velocities; (5) the finite difference operator is locally rotated in supersonic flow regions so as to properly account for the domain of dependence; and (6) the relaxation algorithm was stabilized using criteria from a time-like analogy.

Jameson, A.↗
NASA NTRS1976

Description and operating performance of a parallel-rail electric-arc system with helium driver gas for the Langley 6-inch expansion tube

A parallel-rail arc-discharge system to heat and pressurize the initial helium driver gas of the Langley 6-inch expansion tube is described. This system was designed for a 2.44-m-long driver vessel rated at 138 MPa, with a distance between rails of 20.3 cm. Electric energy was obtained from a capacitor storage system rated at 12,000 V with a maximum energy of 5 MJ. Tests were performed over a range of energy from 1.74 MJ to the maximum value. The operating experience and system performance are discussed, along with results from a limited number of expansion-tube tests with air and carbon dioxide as test gases.

Moore, J. A.↗
NASA NTRS1976

A depolarization and attenuation experiment using the CTS satellite. Volume 1: Experiment description

An experiment for measuring precipitation attenuation and depolarization on the Communications Technology Satellite (CTS) 11.7 GHz downlink is described. Attenuation and depolarization of the signal received from the spacecraft is monitored on a 24 hour basis. Data is correlated with ground weather conditions. Theoretical models for millimeter wave propagation through rain are refined for maximum agreement with observed data. Techniques are developed for predicting and mimimizing the effects of rain scatter and depolarization on future satellite communication systems.

Bostian, C. W.↗
NASA NTRS1977

MIDAS, prototype Multivariate Interactive Digital Analysis System for large area earth resources surveys. Volume 1: System description

A third-generation, fast, low cost, multispectral recognition system (MIDAS) able to keep pace with the large quantity and high rates of data acquisition from large regions with present and projected sensots is described. The program can process a complete ERTS frame in forty seconds and provide a color map of sixteen constituent categories in a few minutes. A principle objective of the MIDAS program is to provide a system well interfaced with the human operator and thus to obtain large overall reductions in turn-around time and significant gains in throughput. The hardware and software generated in the overall program is described. The system contains a midi-computer to control the various high speed processing elements in the data path, a preprocessor to condition data, and a classifier which implements an all digital prototype multivariate Gaussian maximum likelihood or a Bayesian decision algorithm. Sufficient software was developed to perform signature extraction, control the preprocessor, compute classifier coefficients, control the classifier operation, operate the color display and printer, and diagnose operation.

Christenson, D.↗
NASA NTRS1977

HEAO-A Observatory Description

The High Energy Astronomy Observatory Program is briefly described to introduce guest observers to the HEAO-A mission. Topics discussed include spacecraft subsystems, scientific instrumentation, and the mission operations concept. Scientific participants such as principal investigators and co-investigators are listed.

Dailey, C.↗
NASA NTRS1977

Description and flight tests of an oculometer

A remote sensing oculometer was successfully operated during flight tests with a NASA experimental Twin Otter aircraft at the Langley Research Center. Although the oculometer was designed primarily for the laboratory, it was able to track the pilot's eye-point-of-regard (lookpoint) consistently and unobtrusively in the flight environment. The instantaneous position of the lookpoint was determined to within approximately 1 deg. Data were recorded on both analog and video tape. The video data consisted of continuous scenes of the aircraft's instrument display and a superimposed white dot (simulating the lookpoint) dwelling on an instrument or moving from instrument to instrument as the pilot monitored the display information during landing approaches.

Middleton, D. B.↗
NASA NTRS1976

Skylab S191, S192 program descriptions

Software developed to assist in assessing and analyzing earth radiation data obtained from Skylab S191 and S192 experiments are described. A block data generation routine is included along with a plot program for the S191 experiment. Changes in format from that of the original JSC tapes are discussed.

Mack, M.↗
NASA NTRS1977

A description of the software analysis from flight and simulation data of the course cut limiter in the TCV b-737 area navigation computer

During automatic horizontal path captures, the (Terminal Configured Vehicle) B-737 airplane maintained smaller than designed path intercept angles and experienced a sawtooth bank angle oscillation during its turn towards the path. From flight data, it was determined that these anomalies were caused by the improper output of the course cut limiter in the horizontal path control law. The output from the course cut limiter did not obtain its full value and it was calculated stepwise discontinuously. The automatic horizontal path captures were then conducted on the TCV B-737 airplane real-time simulation. The path intercept angles were maintained properly and no bank angle oscillation was encountered. Data showed that the course cut limiter was calculated at its full value in a continuous manner. The intermediate calculations of the course cut limiter in the airplane's navigation computer were rewritten and rescaled in such a manner that truncation errors could be minimized. The horizontal path capture tests were then reflown. The airplane maintained the proper path intercept angle and no bank angle oscillations occurred on any of the tests.

Knox, C. E.↗
NASA NTRS1977

Description of a Computer Program Written for Approach and Landing Test Post Flight Data Extraction of Proximity Separation Aerodynamic Coefficients and Aerodynamic Data Base Verification

A computer program written to calculate the proximity aerodynamic force and moment coefficients of the Orbiter/Shuttle Carrier Aircraft (SCA) vehicles based on flight instrumentation is described. The ground reduced aerodynamic coefficients and instrumentation errors (GRACIE) program was developed as a tool to aid in flight test verification of the Orbiter/SCA separation aerodynamic data base. The program calculates the force and moment coefficients of each vehicle in proximity to the other, using the load measurement system data, flight instrumentation data and the vehicle mass properties. The uncertainty in each coefficient is determined, based on the quoted instrumentation accuracies. A subroutine manipulates the Orbiter/747 Carrier Separation Aerodynamic Data Book to calculate a comparable set of predicted coefficients for comparison to the calculated flight test data.

Homan, D. J.↗
NASA NTRS1977

Mars surface penetrator: System description

A point design of a penetrator system for a Mars mission is described. A strawman payload which is to conduct measurements of geophysical and meteorological parameters is included in the design. The subsystems used in the point design are delineated in terms of power, mass, volume, data, and functional modes. The prospects for survival of the rigors of emplacement are described. Data handling and communications plans are presented to allow consideration of the requirements placed by the penetrator on the orbiter and ground operations. The point design is technically feasible and the payload selection scientifically desirable.

Manning, L. A.↗
NASA NTRS1977

Description and review of global measurements of atmospheric species from GASP

Aerosol composition data were collected with a NASA F-106 aircraft. Present measurements include ozone, carbon monoxide, water vapor, aerosol and condensation nuclei number densities, sulphates, nitrates, and the chlorofluoromethanes. Meteorological and flight parameters are also recorded for use in data analysis. The present aircraft operations obtain data between 6 and 13.5 km from 65 degree N between Europe and the north Pacific, and from 23 degree S over South America and 42 degree S over New Zealand. Typical constituent data from the aircraft operations during the first one and a half years are presented. Instrumentation is discussed.

Gauntner, D. J.↗
NASA NTRS1976

The tasselled cap - A graphic description of the spectral-temporal development of agricultural crops as seen by Landsat

The time trajectories of agricultural data points as seen in Landsat signal space form a pattern suggestive of a tasselled woolly cap. Most of the important crop phenomena can be described using this three dimensional construct: the distribution of signals from bare soil, the processes of green development, yellow development, and shadowing and harvesting. A linear preprocessing transformation which isolates green development, yellow development and soil brightness is used to reduce the dimension of the signal space. Specific measurable pattern elements of the tasselled cap are used to estimate and correct atmospheric haze and moisture effects.

Kauth, R. J.↗
NASA NTRS1976

Phenomenology of the earth's bow shock system - A summary description of experimental results

Observational data on the earth's bow shock system are classified and characterized. Foreshock components, midshock components, and aftershock components are discussed separately. Schematic representations of the field and plasma particle parameters are elaborated, with attention given to quasi-perpendicular geometry and quasi-parallel geometry. Magnetic pulsation structure is delineated. Schematic profiles of field, particle, and wave behavior through a representative quasi-perpendicular shock crossing are displayed.

Greenstadt, E. W.↗
NASA NTRS1977

A description of the University of Illinois meteor radar system and some first results

A recently established meteor radar system for observing motions in the upper atmosphere is described, which features a peak transmitter power of 5 megawatts. This large peak power should allow a much greater number of wind determination during a fixed period of time than other meteor radar stations. The essential features of the range algorithm, two velocity algorithms, and the interferometer phase difference algorithm in use are described. A typical measured variation in the radial southward wind as a function of time of day based on data from all altitudes is shown as an example, and some results of spectral analysis of the data, yielding amplitude and phase variation with altitude for significant waves, is discussed.

Geller, M. A.↗
NASA NTRS1977

Description of path-in-the-sky contact analog piloting display

A contact analog display called Path-In-The-Sky (PITS) integrates information on airplane attitude, airplane kinematic performance, navigation situation, and path prediction into one instrument. The pictorial format utilized in the PITS display concept was designed to reduce the required instrument scan and to simplify interpretation of informtion with the objective of reducing pilot work load. Described are the symbology of the PITS display, the coordinate systems used to generate the display, and the magnitudes of pertinent geometric characteristics selected during the display development. Also included are examples of the PITS display generated on a stand-alone graphics computer.

Knox, C. E.↗
NASA NTRS1977

Aircraft sensor analysis package system description

An overview of the capabilities of the Aircraft Sensor Analysis Package (ASAP) is presented. The approach is non-technical, and several output products are illustrated. The major features of the system are described in more detail than is found in the User's Guide to a potential user, or to a user looking for a specific capability to be incorporated in another system.

Forman, M. L.↗
NASA NTRS1977

Solar power satellite. System definition study. Part 1, volume 5: SPS transportation. Representative system descriptions

Both LEO transportation (earth to low earth orbit) and GEO transportation (low earth orbit to geosynchronous orbit) segments were addressed. LEO options include both a 2 stage winged space freighter vehicle and a 2 stage ballistic recoverable vehicle. Both incorporate LO(2)/RP-1/LH(2) engines on the booster and standard SSME's on the upper stage. The orbit transfer vehicle options included chemical for geosynchronous satellite assembly and self powered electric propulsion for low earth orbit satellite assembly. An exhaust products analysis was conducted for the earth to LEO vehicle since atmospheric pollution could be a concern.

Source record↗