SEARCH · Engineering Papers

Results for “DIRECT ENERGY CONVERSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Toward sustainable production of N-containing products via nonthermal plasma-enhanced conversion of natural gas resources

Nonthermal plasmas can directly activate and cleave the strong chemical bonds in molecular nitrogen and methane to facilitate the transformation of these inherently stable molecules through the application of electrical energy. Here, we report a low temperature, atmospheric pressure, nonthermal plasma for the “one-pot” synthesis of olefins, alkynes, higher molecular weight hydrocarbons, ammonia, and nitrogen-containing liquids from a representative shale gas feed enriched with nitrogen. Furthermore, we reproducibly observe a wide range of valuable and synthetically challenging gas-phase and liquid-phase products containing C-N, C-C, and N-H bonding by controlling the N 2 concentration in the inlet feed stream. In nitrogen-lean regimes, hydrocarbon products dominate (e.g., ethylene, acetylene, etc.), while nitrogen-rich regimes promote incorporation of nitrogen into the products, leading to the formation of ammonia and liquid products containing a variety of functionalities (e.g., nitriles, amines, heterocycles). High resolution electrospray ionization mass spectrometry was used to measure molecular weights and identify the chemical formulas of the liquid products. Van Krevelen diagrams were created and showed many products with compositions around H/C = 2 and N/C = 0.5, indicating the potential importance of intermediate species with these ratios for liquid formation (e.g., CH 3 CN + H).

03 NATURAL GAS↗

NASA NTRS1990

Conversion of omnidirectional proton fluxes into a pitch angle distribution

The long-term radiation exposures anticipated for astronauts aboard oriented space stations entail consideration of spacecraft mass distribution and the direction of high-energy proton flux. A scheme has been developed for deriving pitch-angle distributions of energetic protons from the omnidirectional fluxes contained in the AP-8 MIN magnetospheric radiation model. A functional form is also presented for expressing the proton pitch-angle distributions at a given energy and L coordinate, as a function of only three parameters.

Badhwar, Gautam D.↗

DOE OSTI2022

Electrochemical CO2 conversion to formic acid through the Andora Process

Electrochemical utilization or conversion of CO2 can be used to convert waste CO2 into targeted high-value and cost-effective commercial products. Conventional processes for CO2 conversion to fuel sources are challenging and expensive due to their requirement for high temperatures and pressures. Electrochemically, a catalyst can be used at a fixed applied potential to reduce CO2 to form a desired product with less competition at modest operating conditions. Formic acid (FA) has recently become a product of interest for CO2 conversion due to its potential for hydrogen storage and fuel cell applications. Electrochemically, FA is produced through a direct two-electron transfer process involving CO2 with a proton source, requiring less energy input and fewer reaction steps than traditional processes. However, there remain significant obstacles for the broader-scale implementation of CO2 on the market, including competition with unwanted CO and H, the presence of molecular oxygen, and stability of the electrocatalyst. In order to overcome some of these challenges, a new continuous flow Andora Process was developed consisting of two separate cells to decouple electrochemical reduction of the charge carrier with the FA production via an engineered catalyst. Recent experimental results show that with appropriate design changes and operating conditions to the flow system, FA production above 500 mM can be achieved along with efficiencies above 80%. TEA and LCA assessments of the Andora Process show a potential for the reduction in the GWP potential and cost saving compared to the current comparative formic acid production process.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Nitrogen derived from Combined Algal Processing supports algae cultivation for biofuels

Algae biomass, a biofuel feedstock with potential to reduce global CO 2 emissions, is currently too expensive Nitrogen, a significant input and life cycle cost, requires research on recycling and additional sources to reduce costs. Integral to nitrogen recycling is the knowledge of actual nitrogen requirements in outdoor ponds, thus data from the Unified Field Studies of the Algae Testbed Public-Private Partnership was analyzed. The data showed that Nannochloropsis oceanica used 14–24 mg/L NH 4 + per harvest cycle for robust growth. Nitrogen recycled directly from the algae conversion process will likely be the primary source of nitrogen for algae cultivation. Harvested algae can be fractionated via Combined Algal Processing (CAP), where algae are pretreated, fermented, and the fuel feedstocks (e. g. ethanol, lipids) are removed leaving a nitrogen rich slurry. Chlorella vulgaris grew robustly in nitrogen-free media supplemented with CAP residues through 4 harvest cycles with no inhibition. The amount of nitrogen as free ammonium available for recycling directly without further processing was insufficient (~4% of total needed), thus the nitrogen fixing bacteria, Azotobacter vinelandii, was investigated as a means for increasing ammonium concentration in CAP residues. This organism was shown to be proficient at growth on sugars liberated from algae biomass during pretreatment and sustained algae growth using A. vinelandii supernatants was also demonstrated. Using Azotobacter to increase ammonium concentrations on-site using an inexpensive biological process to generate the necessary ammonium for outdoor algae cultivation improves sustainability of algae biofuels by avoiding the energy intensive steps of typical ammonium production and transport. Furthermore, these results show that byproducts of algae conversion begin to close nitrogen demand and, with further supplementation by diazotrophic bacteria or protein hydrolysis, may completely replace current energyintensive and costly industrial nitrogen sources offering a path to increased economic feasibility and improved life cycle analysis of algae-based biofuels.

09 BIOMASS FUELS↗

DOE OSTI2024

Dashboard for Marine Energy Site Assessment and Monitoring

The marine energy (ME) industry presently relies upon fragmented site assessment solutions that require high resource expenditure for deployment at each site and do not leverage the wealth of readily available tools and information. A wave energy resource assessment dashboard, currently in development, will substantially improve siting, permitting, operations, and maintenance of ME projects by providing an integrated solution that is a one-stop-shop for a developer’s needs. The Site Energy Assessment and MOnitoring Dashboard (SEAMOD) will be of commercial interest to anyone seeking to deploy an ME project and is easily expandable to include tidal and wind energy site assessments. The integrated dashboard is being developed using state-of-the-art database and cloud computing methods and data-assimilative modeling tools that can be coupled with low-cost, rapidly deployable wave buoys and environmental sensing hardware. The combined software and hardware dashboard will reduce wave energy site characterization and wave climate monitoring costs by more than 60 percent and provide assessments that meet international industry standards. To realize a thriving global ME industry, the physical environment at a potential deployment site must be understood, not only for resource characterization, but also for optimization of device and power conversion performance. SEAMOD directly addresses these needs with a commercially marketable product. SEAMOD is a low-cost solution that provides comprehensive ME resource assessments, baseline environmental monitoring, and offshore characterizations required for successful ME development. The key technical objectives for Phase I were a series of software development goals, which when implemented with monitoring solutions, produced an initial proof-of-concept low-cost wave energy resources dashboard. In Phase II, the development of the prototype SEAMOD continued. The basic framework employed was the development of a revised dashboard and monitoring tool customized for ME applications by focusing on IEC site assessment and method requirements. Development was focused on the integration of full hindcast metocean products to provide hindcast resource characterization and environmental information. The final integrated dashboard provides a low-cost solution that delivers comprehensive, scalable, industry-standard energy resource assessments and offshore characterizations required for successful ME development. The integrated dashboard offers visibility of the most recent site modeling, measurements, and historical data. The application and integration of consensus-based standards for wave energy resource assessment, as determined by the International Electrotechnical Commission (IEC), are crucial for the impact and value of SEAMOD. SEAMOD includes monthly, seasonal, and yearly statistics, as well as the total 30-year record, offering temporal resolution of the IEC parameters to aid potential developers in determining the available wave energy resources in their area of interest.

16 TIDAL AND WAVE POWER↗

DOE OSTI2026

Power conversion in SnS photocathodes made by electrochemical growth is limited by recombination at (002) buried facets

Herzenbergite α-SnS is a promising p-type semiconductor for photovoltaic and solar fuel applications, but current devices are plagued by substantial photovoltage losses. Here we use vibrating Kelvin probe surface photovoltage for the first time to study the recombination losses in microcrystalline SnS photoelectrodes. α-SnS films of varied crystal orientation, size, and shape are obtained by electrochemical growth from aqueous tin( II ) chloride and sodium thiosulfate solutions near room temperature. After application of a CdS passivation layer, the films function as photocathodes for the methylviologen reduction reaction. Photoelectrochemical and surface photovoltage measurements reveal that the performance of these devices is sensitively controlled by mainly the SnS crystal orientation and to a lesser extent by the grain size. For example, the highest charge recombination rates of 8.97 × 10 14 s −1 cm −2 and lowest photocurrent (0.73 mA cm −2 ) and lowest photovoltage (0.12 V) occur for SnS films containing 500 nm crystals with irregular shapes and SnS lattices tilted away from the (001) orientation. On the other hand, the best performance (1.62 mA cm −2 , 0.16 V, 3.32 × 10 12 s −1 cm −2 ) is seen for 1100 nm fully (001) oriented SnS nanoplates. Furthermore, these findings agree with improved charge carrier mobility in the 001 direction and they also show that charge recombination in SnS films occurs mainly at dangling Sn–S bonds at buried (002) facets. Such buried interfaces need to be suppressed for optimized solar energy conversion with SnS.

Najaf, Zainab [University of California, Davis, CA↗

DOE OSTI2024

Rotating cylinder electrode in reactive CO 2 capture: Identifying active C species via transport, VLE models and kinetics

Here, this article explores technical challenges and potential methodologies for understanding electrochemical Reactive CO 2 Capture (RCC) mechanisms. RCC offers potential energy cost advantages by directly converting captured CO 2 into fuels and chemicals, unlike traditional carbon capture and utilization (CCU) processes that require sequential capture, concentration, and compression. However, direct conversion of captured CO 2 introduces complexity due to additional equilibrium buffer reactions, making it challenging to identify active species for reduction in electrochemical studies. This article discusses methods to integrate transport, thermodynamics, and kinetics concepts to identify active carbon sources in RCC. Vapor‐Liquid Equilibrium (VLE) and transport models are validated against experimental results obtained in a gastight rotating cylinder electrode reactor and are shown as useful tools for studying RCC in heterogeneous electrocatalysts across different capture agents, solvents, and temperatures. This article establishes an experimental framework for advancing research in electrochemical RCC.

Electrocatalysis↗

DOE OSTI2024

Photon Upconversion at Organic-Inorganic Interfaces

Photon upconversion is a process that combines low-energy photons to form useful high-energy photons. There are potential applications in photovoltaics, photocatalysis, biological imaging, etc. Semiconductor quantum dots (QDs) are promising for the absorption of these low-energy photons due to the high extinction coefficient of QDs, especially in the near infrared (NIR). This allows the intriguing use of diffuse light sources such as solar irradiation. In this review, we describe the development of this organic-QD upconversion platform based on triplet-triplet annihilation, focusing on the dark exciton in QDs with triplet character. Then we introduce the underlying energy transfer steps, starting from QD triplet photosensitization, triplet exciton transport, triplet-triplet annihilation, and ending with the upconverted emission. Design principles to improve the total upconversion efficiency are presented. We end with limitations in current reports and proposed future directions. This review provides a guide for designing efficient organic-QD upconversion platforms for future applications, including overcoming the Shockley-Queisser limit for more efficient solar energy conversion, NIR-based phototherapy, and diagnostics in vivo.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2019

Bell Inequality Experiment for a High Brightness Time-Energy Entangled Source

A periodically poled MgO doped LiNbO3 (MgO:LN) non-degenerate photon pair source is utilized for spontaneous parametric down-conversion of 532 nm photons into time-energy entangled pairs of 800 and 1600 nm photons. The entangled photons are separated using previously detailed sorting optics, such that each wavelength is independently directed through one of two modified Mach-Zehnder interferometers also known as a Franson interferometer after which they are fiber-optically guided to high-efficiency photon detectors. Output from the detectors is sent to a high resolution time tagger, where coincidences between the entangled photons are recorded. By varying the length of the long path in one Mach-Zehnder interferometer, it is possible to observe high visibility sinusoidal fringes in the measured coincidence rates (while no variation is seen in single photon detection rates). These fringes due to interference between the photon probability amplitudes are indicative of a violation of the Bell inequality, and confirm inconsistencies with local hidden variable theory for the correlations of the time-energy entangled photon pairs.

time-energy entanglement↗

DOE OSTI2021

Comparison of powder bed fusion and directed energy deposition for tailoring mechanical properties of traditionally brittle alloys

The mechanical performance of an Fe-Co intermetallic alloy processed by laser powder bed fusion (L-PBF) and laser directed energy deposition (L-DED) additive manufacturing is compared. L-PBF material was characterized by high strength (500–550 MPa) and high ductility (35%) in tension, corresponding to a ~250% increase in strength and an order-of-magnitude improvement in ductility relative to conventional material. Conversely, L-DED material exhibited similarly poor tensile properties to the conventional wrought alloy, with low strength (200–300 MPa) and low ductility (0–2.7%). Finally, the disparity in properties between L-PBF and L-DED material is discussed in the context of the fundamental differences between manufacturing methods.

36 MATERIALS SCIENCE↗

NASA NTRS2019

Bell Inequality Experiment for a High Brightness Time-Energy Entangled Source

A periodically poled MgO - doped LiNbO3 (MgO:LN) non-degenerate photon pair source is utilized for spontaneous parametric down-conversion of 532-nanometer photons into time-energy entangled pairs of 800- and 1600-nanometer photons. The entangled photons are separated using previously detailed sorting optics, such that each wavelength is independently directed through one of two modified Mach-Zehnder interferometers - also known as a Franson interferometer - after which they are fiber-optically guided to high-efficiency photon detectors. Output from the detectors is sent to a high resolution time tagger, where coincidences between the entangled photons are recorded. By varying the length of the long path in one Mach-Zehnder interferometer, it is possible to observe high visibility sinusoidal fringes in the measured coincidence rates (while no variation is seen in single photon detection rates). These fringes - due to interference between the photon probability amplitudes - are indicative of a violation of the Bell inequality, and confirm inconsistencies with local hidden variable theory for the correlations of the time-energy entangled photon pairs.

Time-Energy Entanglement↗

NASA NTRS1995

Convergence properties of finite-difference hydrodynamics schemes in the presence of shocks

We investigate the asymptotic convergence of finite-difference schemes for the Euler equations when the limiting solution contains shocks. The Lax-Wendroff theorem guarantees that certain conservative schemes converge to correct, physically valid solutions. We focus on two one-dimensional operator-split schemes with explicit artificial-viscosity terms. One, an internal-energy scheme, does not satisfy the assumptions of Lax-Wendroff; the other, a conservative total-energy scheme, does. With viscous lengths chosen proportional to the grid size, we find that both schemes converge to their zero-grid-size limits at the theoretically expected rate, but only the conversative scheme converges toward correct solutions of the inviscid fluid equations. We show that the difference in their behaviors results directly from the presence of shocks in the limiting solution. Empirically, we find that when the viscous lenghts tend toward zero more slowly than the grid size, however the nonconservative scheme also converges toward correct solutions. We characterize the asymptotic behavior of the total-energy scheme in a particular problem in which a shock forms. As the grid is refined, a Cauchy error approaches the expected rate of change slowly. We show that the changes in the artificial viscosity alter the diffusion of small-amplitude waves. The differences associated with such waves make the dominant contribution to the Cauchy error. We formulate an analytic model to relate the rate of approach to the effect of varying diffusion in waves and find quantitative agreement with our numerical results.

Kimoto, Paul A.↗

DOE OSTI2024

Power Take-Off Design Study for a Small-Scale Oscillating Surge Wave Energy Converter for Powering the Blue Economy Applications

The power take-off (PTO) is an integral part of wave energy conversion, and the design process is nontrivial. Better PTOs, and better processes for selecting and designing PTO architectures for various applications, would benefit devices that assist in powering the blue economy by decreasing time and money spent on PTO design and increasing the overall energy capture performance of these devices. This paper chronicles the selection process of a PTO for a small-scale surge-type wave energy converter (WEC) for the purpose of informing future PTO selection processes. Three PTO architectures are evaluated in WEC-Sim: a hydraulic check valve PTO, a hydraulic active valving PTO, and a directly electrified PTO. Simple models of each PTO are constructed. Because a model for the small-scale device was initially unavailable, the PTOs are simulated on a large-scale device. The results are scaled down using Froude scaling and compared to results from directly simulating a small-scale model. Strong assumptions are made because this work is early in the design stages, and a coarse look at PTO options was desired. Specifically, the effectiveness of controls is investigated, along with the efficiency of energy conversion. However, energy capture is only part of the consideration; there are also logistic concerns to be considered when selecting a PTO. For example, components for large-scale WECs are so large and expensive that it may make sense to custom-build PTO components, but small-scale WECs would benefit from off-the-shelf availability because the cost of customization would be a significant portion of the total capital cost of deployment at a small scale. Submersible, off-the-shelf components are much easier to source for hydraulic PTOs. Because of highly effective controls, efficient energy conversion, and availability of marine-grade components, an active valving hydraulic PTO is selected for this small-scale surge-type WEC.

energy conversion/systems↗

DOE OSTI2023

Power Take-Off Design Study for a Small-Scale Oscillating Surge Wave Energy Converter for Powering the Blue Economy Applications: Preprint

The power take-off (PTO) is an integral part of wave energy conversion, and the design process is nontrivial. Better PTOs, and better processes for selecting and designing PTO architectures for various applications, would benefit devices that assist in powering the blue economy by decreasing time and money spent on PTO design and increasing the overall energy capture performance of these devices. This paper chronicles the selection process of a PTO for a small-scale surge-type wave energy converter (WEC) for the purpose of informing future PTO selection processes. Three PTO architectures are evaluated in WEC-Sim: a hydraulic check valve PTO, a hydraulic active valving PTO, and a directly electrified PTO. Simple models of each PTO are constructed. Because a model for the small-scale device was initially unavailable, the PTOs are simulated on a large-scale device. The results are scaled down using Froude scaling and compared to results from directly simulating a small-scale model. Strong assumptions are made because this work is early in the design stages, and a coarse look at PTO options was desired. Specifically, the effectiveness of controls is investigated, along with the efficiency of energy conversion. However, energy capture is only part of the consideration; there are also logistic concerns to be considered when selecting a PTO. For example, components for large-scale WECs are so large and expensive that it may make sense to custom-build PTO components, but small- scale WECs would benefit from off-the-shelf availability because the cost of customization would be a significant portion of the total capital cost of deployment at a small scale. Submersible, off-the-shelf components are much easier to source for hydraulic PTOs. Because of highly effective controls, efficient energy conversion, and availability of marine-grade components, an active valving hydraulic PTO is selected for this small-scale surge-type WEC.

electric PTO↗

DOE OSTI2023

Coordination Polymer Electrocatalysts Enable Efficient CO‐to‐Acetate Conversion

Abstract Upgrading carbon dioxide/monoxide to multi‐carbon C 2+ products using renewable electricity offers one route to more sustainable fuel and chemical production. One of the most appealing products is acetate, the profitable electrosynthesis of which demands a catalyst with higher efficiency. Here, a coordination polymer (CP) catalyst is reported that consists of Cu(I) and benzimidazole units linked via Cu(I)‐imidazole coordination bonds, which enables selective reduction of CO to acetate with a 61% Faradaic efficiency at −0.59 volts versus the reversible hydrogen electrode at a current density of 400 mA cm −2 in flow cells. The catalyst is integrated in a cation exchange membrane‐based membrane electrode assembly that enables stable acetate electrosynthesis for 190 h, while achieving direct collection of concentrated acetate (3.3 molar) from the cathodic liquid stream, an average single‐pass utilization of 50% toward CO‐to‐acetate conversion, and an average acetate full‐cell energy efficiency of 15% at a current density of 250 mA cm −2 .

Luo, Mingchuan↗

DOE OSTI2026

In Situ Imaging Reveals Efficient Charge Separation in Monolayer MoS 2 –WS 2 Type-II Heterojunctions

Covalently bonded in-plane two-dimensional (2D) transition metal dichalcogenide (TMD) heterojunctions with atomically sharp interfaces hold great promise for photocatalytic applications in solar energy conversion and environmental remediation; however, their spatially resolved charge distribution and transport, particularly under operando conditions, remain poorly understood. Here, we employ photoscanning electrochemical microscopy (photo-SECM) to directly visualize photoinduced charge separation in monolayer MoS 2 –WS 2 in-plane heterojunctions. Spatial separation of photogenerated carriers is observed, with electrons accumulating in MoS 2 and holes in WS 2 , leading to strongly asymmetric interfacial kinetics: Fc + reduction proceeds rapidly on MoS 2 (0.6 cm s –1 ), whereas Fc oxidation on WS 2 is significantly slower (0.008 cm s –1 ). High-resolution surface photovoltage microscopy (SPVM) enables a quantitative comparison of charge-separation capacity across architectures. The in-plane MoS 2 –WS 2 heterojunction shows the largest photovoltage contrast (−35 mV in MoS 2 , 20 mV in WS 2 ), exceeding the vertical heterojunction (−18 mV in MoS 2 , 11 mV in WS 2 ) and the individual monolayers (−12 mV for MoS 2 , – 1 mV for WS 2 ), establishing the following trend: in-plane > vertical > monolayers. Ultraviolet photoelectron spectroscopy (UPS) indicates that this directional charge separation is driven by intrinsic type-II band alignment, while photoluminescence (PL) imaging shows that the interface acts as a recombination center that limits efficient carrier extraction. These results provide direct experimental evidence of type-II-driven charge separation in in-plane heterojunctions and offer critical insights for interface design in high-efficiency photocatalytic and optoelectronic systems.

electrical properties↗

NASA NTRS1979

Radiation energy conversion in space

Topics discussed at the third NASA conference on radiant energy conversion are reviewed. The unconcentrated-photovoltaic-generation version of a solar power satellite is described, noting that it will consist of a 21.3 x 5.3-sq-km silicon-solar-cell array expected to provide 17 Gw of electrical power, with 1 km in diam transmitters oriented to beam 2.45 GHz microwave power to two receiving/rectifying 'rectennas' on earth. The Solares space-energy-system concept, designed for providing a large fraction of the world's energy needs at costs comparable to those of future coal/nuclear alternative, is considered, as are subsystems for improving the economics of the solar power satellite. A concept proposing the use of relativistic-electron-storage rings for electron-beam energy transmission and storage, and a report on the production of a high temperature plasma with concentrated solar radiation are taken into account. Laser-conversion systems, including the direct-solar-pumped space laser, and the telec-powered spacecraft, are discussed.

Billman, K. W.↗

DOE OSTI2021

A transmissive concentrator photovoltaic module with cells directly cooled by silicone oil for solar cogeneration systems

Hybrid concentrator photovoltaic-thermal systems can cogenerate electricity and heat by beam-splitting incoming concentrated light onto photovoltaic cells and a thermal receiver to increase total conversion efficiency and potentially reduce system cost. To demonstrate this, we have designed and prototyped a transmissive spectrum-splitting concentrator photovoltaic module that maximizes solar energy conversion by utilizing the entire solar spectrum. Visible light is collected using infrared-transmissive triple-junction photovoltaic cells to achieve an in-band module efficiency of 43.3% for light of wavelength λ < 873 nm, while 44.2% of out-of-band light with λ > 873 nm is transmitted through for collection by a thermal receiver. During testing on a dual-axis tracked parabolic concentrator dish at up to 166 suns, cell temperatures were maintained at 119 °C or below via a novel active cooling method. This cooling system strictly flows silicone oil directly across both sides of the cells, without inhibiting optical transmission, as verified through experimentation and simulation. The module was validated outdoors for 572 sun·hrs, and achieved a maximum thermal receiver temperature of 180 °C. 86.1% of incident solar power is collected at 166 suns average concentration collectively among the electrical, cooling, and thermal receiver subsystems. The remaining 13.9% is lost to mirror reflectivity, dish shadowing, receiver reflection, and thermal losses. The ability to directly cool the cells with an inert silicone oil offers the potential for reduced system cost relative to previous transmissive hybrid concentrator photovoltaic-thermal systems, including microfluidic-cooled designs. This solar cogeneration capability is valuable in a wide range of commercial and industrial applications.

14 SOLAR ENERGY↗