Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIFFUSION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Effect of high rotor pressure-surface diffusion on performance of a transonic turbine

The subject turbine was investigated to determine the effect of high rotor pressure-surface diffusion on turbine performance. A comparison of the subject turbine with the most efficient transonic turbine in the present series of investigations showed that the efficiency of the subject turbine was almost as high, the suction-surface diffusion parameter was about the same, and the solidity was reduced by 36 percent. Because the loss per blade increased greatly with an increase in pressure-surface diffusion, the latter is also considered to be an important design consideration.

Miser, James W↗

Silicon solar cell process development, fabrication and analysis

For UCP Si, randomly selected wafers and wafers cut from two specific ingots were studied. For the randomly selected wafers, a moderate gettering diffusion had little effect. Moreover, an efficiency up to 14% AMI was achieved with advanced processes. For the two specific UCP ingots, ingot #5848-13C displayed severe impurity effects as shown by lower 3sc in the middle of the ingot and low CFF in the top of the ingot. Also the middle portions of this ingot responded to a series of progressively more severe gettering diffusion. Unexplained was the fact that severely gettered samples of this ingot displayed a negative light biased effect on the minority carrier diffusion length while the nongettered or moderately gettered ones had the more conventional positive light biased effect on diffusion length. On the other hand, ingot C-4-21A did not have the problem of ingot 5848-13C and behaved like to the randomly selected wafers. The top half of the ingot was shown to be slightly superior to the bottom half, but moderate gettering helped to narrow the gap.

Iles, P. A.↗

Comparison of Numerical Model Results with Diffusion Flames in Microgravity

The effects of gravity on methane diffusion flames were studied using a finite difference numerical model. Variables under consideration included velocity, pressure, temperature, enthalpy, reactive species, and inert carrier gas. Results obtained showed that flames in zero gravity were wider and taller than those in normal gravity. The use of a six reaction scheme produced similar predictions of flame width and height compared to those of the single reaction case. The numerical models predicted a considerable difference in the flame base region between normal gravity and low gravity. This region is considered to be beyond the boundaries of current analytical models.

Hyer, Paul V.↗

Mutual Diffusion Coefficients of Na 2 SO 4 at C = 0.02989 mol·dm -3 and 298.15 K by Using Rayleigh Interferometry with Free Diffusion Boundary Conditions: Experimental Test of the Effect of the C 3/2 Concentration Dependence of Refractive Index at Low Concentration

Rayleigh interferometry is one of the most precise and accurate methods for the experimental determination of the mutual diffusion coefficients of both electrolytes and non-electrolytes in liquid solutions. For binary solutions at moderate and high concentrations where the concentration dependences of both diffusion coefficient and refractive index can be assumed to be linear or almost linear and the concentration difference ΔC between a pair of solutions undergoing free diffusion is not large compared to their average concentration, and by using proper combinations of the interference fringe positions as they vary with time, under these conditions diffusion coefficients are obtained that are independent of the size of ΔC. However, this situation becomes more complicated at low concentrations for electrolyte solutions where the concentration dependences of both the diffusion coefficient and refractive index are non-linear, with C 1/2 dependence for the diffusion coefficient and C 3/2 dependence for the refractive index. As a test of these effects on calculated mutual diffusion of electrolyte solutions at low concentrations as measured by Rayleigh interferometry, apparent mutual diffusion coefficients D v,a (volume-fixed reference frame) were measured for fixed average concentrations C=(0.02989 ± 0.00001) mol·dm –3 of Na 2 SO 4 (aq) at 298.15 K while varying ΔC/C from 0.66673 to 2, a threefold variation. The dependence of the diffusion coefficient on ΔC/C was found to be linear, yielding D v = 1.041 6 × 10 –9 m 2 ·s –1 for an infinitely small concentration difference between the diffusing solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zircon (U-Th)/He Impact Crater Thermochronometry and the Effects of Shock Microstructures on Helium Diffusion Kinetics

Accurate and precise age determination of impact cratering events remains challenging and often contentious; less than half of all known craters are regarded as accurately and precisely dated. Zircon (U-Th)/He (ZHe) dating of impactites can be employed to date medium to large impact structures as ZHe ages can be fully reset in minutes at T >1000°C, a plausible scenario in the central melt pool. In contrast, complete resetting of ZHe at 200-300°C, encountered near the crater margins or due to post-impact hydrothermal overprinting, may take >103-6 years. To test the reliability of ZHe impact dating, we have quantified the effects of shock-induced microstructures on helium diffusion kinetics in well-characterized variably shocked zircon. We investigated samples from two impact structures, the Chicxulub multi-ring crater and Ries complex crater, to compare diffusion kinetics from structures with different size, age, and hydrothermal system longevity. Shock microstructures were characterized by backscattered-electron imaging prior to determining the He diffusion kinetics by prograde and retrograde fractional-release experiments via light-bulb furnace with incremental step-heating (10°C) from 300°C to 600°C. Next, we examine the internal interconnectivity and sizes of the diffusion domains by EBSD. While we found that zircon with few shock microstructures exhibited no marked deviation from helium diffusion kinetics of undamaged zircon, zircon grains with planar microstructures and granular textures are characterized by a dramatic decrease in helium retentivity due to the reduction in the effective domain size and the introduction of interconnected fast diffusion pathways. A subset of grains were ZHe dated and showed that less deformed grains yielded a weighted mean age within error of the accepted impact ages, while the grains with planar microstructures or granular textures gave systematically younger ages. These new diffusion data and ZHe ages demonstrate that highly shocked grains are unsuitable for ZHe impact crater dating. Therefore, detailed characterization of impact-induced microstructures is critical for determining accurate ZHe impact ages and offers the possibility of investigating post-impact hydrothermal circulation.

Zircon↗

Understanding of the Elemental Diffusion Behavior in Concentrated Solid Solution Alloys

As one of the core effects on the high-temperature structural stability, the so-called “sluggish diffusion effect” in high-entropy alloy (HEA) has attracted much attention. Experimental investigations on the diffusion kinetics have been carried out in a few HEA systems, such as Al-Co-Cr-Fe-Ni and Co-Cr-Fe-Mn-Ni. However, the mechanisms behind this effect remain unclear. To better understand the diffusion kinetics of the HEAs, a combined computational/experimental approach is employed in the current study. In the present work, a self-consistent atomic mobility database is developed for the face-centered cubic (fcc) phase of the Co-Cr-Fe-Mn-Ni quinary system. The simulated diffusion coefficients and concentration profiles using this database can well describe the experimental data both from this work and the literatures. The validated mobility database is then used to calculate the tracer diffusion coefficients of Ni in the subsystems of the Co-Cr-Fe-Mn-Ni system with equiatomic ratios. The comparisons of these calculated diffusion coefficients reveal that the diffusion of Ni is not inevitably more sluggish with increasing number of components in the subsystem even with homologous temperature. Taking advantage of computational thermodynamics, the diffusivities of alloying elements with composition and/or temperature are also calculated. Furthermore, these calculations provide us an overall picture of the diffusion kinetics within the Co-Cr-Fe-Mn-Ni system.

36 MATERIALS SCIENCE↗

Thermal diffusion, exhaust gas recirculation and blending effects on lean premixed hydrogen flames

Thermodiffusively-unstable lean premixed hydrogen flames are investigated using two-dimensional direct numerical simulation employing finite-rate chemical kinetics. Three databases are generated focussing on the inclusion of the Soret effect, the recirculation of exhaust gas, and blending with methane. A simple rescaling of a classic thermal diffusion model is presented and shown to mimic multicomponent diffusion with very low computational cost and little-to-no loss in accuracy. It is also shown that a previously developed model for mean local flame speeds in lean premixed hydrogen flames can still be used provided Soret effects are taken into account in one-dimensional calculations. The addition of exhaust gas to the unburned mixture is found to enhance thermodiffusive instability; the primary mechanism for this was shown to be the highly-efficient third-body nature of water, with the reduction of adiabatic flame temperature a second-order effect. Again, the existing mean local flame speed model proved sufficient. Finally, blending with methane was found to reduce the thermodiffusive response of the flame, more so than the existing model suggests, despite adjustment of the fuel Lewis number; an adapted model is presented to account for this.

08 HYDROGEN↗

A mechanistic study of Soret diffusion in hydrogen-air flames

The separate and combined effects of Soret diffusion of the hydrogen molecule (H{sub 2}) and radical (H) on the structure and propagation speed of the freely-propagating planar premixed flames, and the strain-induced extinction response of premixed and nonpremixed counterflow flames, were computationally studied for hydrogen-air mixtures using a detailed reaction mechanism and transport properties. Results show that, except for the conservative freely-propagating planar flame, Soret diffusion of H{sub 2} increases the fuel concentration entering the flame structure and as such modifies the mixture stoichiometry and flame temperature, which could lead to substantial increase (decrease) of the flame speed for the lean (rich) mixtures respectively. On the other hand, Soret diffusion of H actively modifies its concentration and distribution in the reaction zone, which in turn affects the individual reaction rates. In particular, the reaction rates of the symmetric, twin, counterflow premixed flames, especially at near-extinction states, can be increased for lean flames but decreased for rich flames, whose active reaction regions are respectively located at, and away from, the stagnation surface. However, such a difference is eliminated for the single counterflow flame stabilized by an opposing cold nitrogen stream, as the active reaction zone up to the state of extinction is always located away from the stagnation surface. Finally, the reaction rate is increased in general for diffusion flames because the bell-shaped temperature distribution localizes the H concentration to the reaction region which has the maximum temperature. (author)

08 HYDROGEN↗

Simultaneous specimen current and time-dependent cathodoluminescence measurements on gallium nitride

Time-dependent cathodoluminescence (CL) and specimen current (SC) are monitored to evaluate trapping behavior and evolution of charge storage. Examination of CL and SC suggests that the near band edge emission in GaN is reduced primarily by the activation of traps upon irradiation, and Gallium vacancies are prime candidates. At the steady state, measurement of the stored charge by empiric-analytical methods suggests that all available traps within the interaction volume have been filled, and that additional charge is being stored interstitially, necessarily beyond the interaction volume. Once established, the space charge region is responsible for the steady state CL emission and, prior to build up, it is responsible for the generation of diffusion currents. Since the non-recombination effects resulting from diffusion currents that develop early on are analogous to those leading to device failure upon aging, this study is fundamental toward a holistic insight into optical properties in GaN.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The galactic halo question - New size constraints from galactic gamma-ray data

Recent satellite observations of the distribution of galactic 100-MeV gamma rays and their interpretation are used as an independent test of the existence and extent of a cosmic-ray halo around the Galaxy. The cosmic-ray halo is defined, uniform and diffusion halo models are described, and the flat diffusion model is employed to investigate the effect of a diffusion halo on the galactic cosmic-ray distribution. Cosmic-ray source distributions that are perpendicularly uniform functions of galactocentric distance are adopted in the analysis. Possible longitudinal distributions of the gamma-ray line flux from neutral-pion decay are evaluated and compared with the fluxes observed by SAS-2 for goodness of fit. The results are shown to be consistent with a thick-disk or thin-halo model having a mean half-thickness of 1 to 3 kpc.

Stecker, F. W.↗

Zircon (U-TH)/He Impact Crater Thermochronometry and the Effects of Shock Microstructures on Helium Diffusion Kinetics

Accurate age determinations of hyper-velocity impact and cratering events remains difficult and often controversial, while less than half of all known impact craters are regarded as accurately and precisely dated. Besides 40Ar/39Ar and U-Pb methods, zircon (U-Th)/He dating of impactites is a burgeoning technique to date large- to medium-sized impact structures. Zircon (U-Th)/He ages can be fully reset in minutes at 1000°C, T commonly reached in and directly adjacent to impact melt domains, whereas complete resetting of zircon (U-Th)/He at <300°C, which might be encountered near the crater margins or persist in post-impact hydrothermal systems, may take >103-4 years. However, there is a critical need to test the reliability of (U-Th)/He impact dating in shock deformed zircon, and to quantify helium diffusion kinetics in well-characterized grains with a broad spectrum of shock-induced defect substructures. For this purpose, we investigated samples from two impact structures, the 66 Ma Chicxulub multi-ring basin and the 15 Ma Ries complex crater, to compare zircon diffusion kinetics from impact structures with varying parameters, including size, age, and hydrothermal system longevity. Shock microstructures were characterized by backscattered-electron (BSE) imaging prior to determination of diffusion step-heating fractional release experiments using light-bulb furnace with prograde and retrograde incrementally 10°C steps from 300°C to 600°C. We find that zircon with low-level shock microstructures exhibit no significant deviation from helium diffusion kinetics of undamaged zircon. In contrast, zircon grains with planar deformation features and granular textures classified by SEM are characterized by a dramatic decrease in helium retentivity, similar to radiation damage, due to the reduction in the effective domain size and the introduction of fast diffusion pathways. This likely renders shocked grains more susceptible to impact-induced hydrothermal resetting. Hence, characterization of impact microstructure is critical for determining accurate impact ages, but also offers the opportunity to determine the magnitude and duration of post-impact hydrothermal circulation.

Catherine Ross↗

Alloyed coatings for dispersion strengthened alloys

Processing techniques were developed for applying several diffusion barriers to TD-Ni and TD-NiCr. Barrier coated specimens of both substrates were clad with Ni-Cr-Al and Fe-Cr-Al alloys and diffusion annealed in argon. Measurement of the aluminum distribution after annealing showed that, of the readily applicable diffusion barriers, a slurry applied tungsten barrier most effectively inhibited the diffusion of aluminum from the Ni-Cr-Al clad into the TD-alloy substrates. No barrier effectively limited interdiffusion of the Fe-Cr-Al clad with the substrates. A duplex process was then developed for applying Ni-Cr-Al coating compositions to the tungsten barrier coated substrates. A Ni-(16 to 32)Cr-3Si modifier was applied by slurry spraying and firing in vacuum, and was then aluminized by a fusion slurry process. Cyclic oxidation tests at 2300 F resulted in early coating failure due to inadequate edge coverage and areas of coating porosity. EMP analysis showed that oxidation had consumed 70 to 80 percent of the aluminum in the coating in less than 50 hours.

Wermuth, F. R.↗

Effect of carbon ion irradiation on Ag diffusion in SiC

Transport of Ag fission product through the silicon-carbide (SiC) diffusion barrier layer in TRISO fuel particles is of considerable interest given the application of this fuel type in high temperature gas-cooled reactor (HTGR) and other future reactor concepts. The reactor experiments indicate that radiation may play an important role in release of Ag; however so far the isolated effect of radiation on Ag diffusion has not been investigated in controlled laboratory experiments. In this study, we investigate the diffusion couples of Ag and polycrystalline 3C–SiC, as well as Ag and single crystalline 4H–SiC samples before and after irradiation with C 2+ ions. The diffusion couple samples were exposed to temperatures of 1500 °C, 1535 °C, and 1569 °C, and the ensuing diffusion profiles were analyzed by secondary ion mass spectrometry (SIMS). We found that diffusion coefficients calculated from these measurements indicate that Ag diffusion was greatly enhanced by carbon irradiation due to a combined effect of radiation damage on diffusion and the presence of grain boundaries in polycrystalline SiC samples.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Diffusion of co-implanted carbon and boron in silicon and its effect on excess self-interstitials

Diffusion of co-implanted carbon (C) and boron (B) in silicon (Si) and its effect on excess Si self-interstitials (I's) after annealing at 800 and 1000 deg. C were investigated by means of secondary ion mass spectrometry. The experimental results showed that C diffusion was not significant at 800 and 1000 deg. C but later became visible for longer annealing times at 1000 deg. C. B diffusion was reduced by the presence of C when no significant C diffusion was observed, but it was enhanced when C diffusion was observed. These results indicate that all implanted C atoms form immobile CI clusters with excess I in the amount of implanted C and that these CI clusters are stable and trap I to reduce B diffusion. On the contrary, CI clusters are dissolved to emit I for longer annealing times at 1000 deg. C and both B and C diffusion are enhanced. Diffusion simulation based on these models fits the experimental profiles of B and C.

36 MATERIALS SCIENCE↗

Zircon (U-Th)/He Impact Crater Thermochronometry and the Effects of Shock Microstructures on Helium Diffusion Kinetics

Absolute age determination of impact cratering events remains difficult and often controversial; a challenge that has resulted in < 50% of known impact craters regarded as accurately and precisely dated. Besides conventional 40Ar/39Ar and U-Pb methods, zircon (U-Th)/He (ZHe) dating of impactites has been applied to large- to medium-sized impact structures. ZHe dates can be fully reset in minutes at 1000°C, which is commonly reached in central sections of the melt sheet, whereas resetting of ZHe at <300°C, which might be encountered near the crater margins or persist in post-impact hydrothermal systems, may take >103-6 years. There is a critical need to quantify the effects of shock-induced microstructures and impact metamorphism on helium diffusion kinetics in well-characterized, variably shocked zircon to further establish the reliability of (U-Th)/He for dating impacts. For this purpose, we investigated suevite and impact melt samples from two impact structures, the Chicxulub multi-ring basin and the Ries complex crater, which enables us to compare zircon helium diffusion kinetics from impact structures with differing sizes, ages, and hydrothermal system longevities. Shock microstructures were characterized by backscattered-electron (BSE) imaging prior to diffusion step-heating fractional release experiments using light-bulb furnace with prograde and retrograde incremental 10°C steps from 250°C to 600°C. Afterward, we characterize the diffusion domain sizes and their interconnectivity within the shocked zircon grains using electron backscatter diffraction (EBSD). We find that zircon with few shock microstructures exhibit no significant deviation from helium diffusion kinetics of undamaged zircon. In contrast, zircon grains with planar deformation features (PDFs) and granular textures classified by BSE and EBSD are characterized by a dramatic decrease in helium retentivity, similar to radiation damaged grains, due to a reduction in the effective domain size and the introduction of interconnected fast diffusion pathways created by shock microstructures. A subset of grains were dated by ZHe after the external morphology of the grains was determined by BSE imaging. The euhedral grains yielded a weighted mean age within the uncertainty of the accepted impact ages, whereas the grains with PDFs or granular textures exhibited younger ages. Thus, these diffusion experiments and ZHe dates suggest that the dramatic decrease in domain size likely renders shocked grains more susceptible to impact-induced hydrothermal resetting and subsequent overprinting. Hence, characterization of shock microstructures is critical for determining accurate impact ages using ZHe methods especially when applied to previously unconstrained craters. The thermochronometer also offers the opportunity to determine the magnitude and duration of post-impact hydrothermal circulation.

zircon↗

Bosonic Amplification of Noise-Induced Suppression of Phase Diffusion

We study the effect of noise-induced dephasing on collisional phase diffusion in the two-site Bose-Hubbard model. Dephasing of the quasimomentum modes may slow down phase diffusion in the quantum Zeno limit. Remarkably, the degree of suppression is enhanced by a bosonic factor of order N/logN as the particle number N increases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transport properties of an asymmetric mixture in the dense plasma regime

Here, we study how concentration changes ionic transport properties along isobars-isotherms for a mixture of hydrogen and silver, representative of turbulent layers relevant to inertial confinement fusion and astrophysics. Hydrogen will typically be fully ionized while silver will be only partially ionized but can have a large effective charge. This will lead to very different physical conditions for the H and Ag. Large first principles orbital free molecular dynamics simulations are performed and the resulting transport properties are analyzed. Comparisons are made with transport theory in the kinetic regime and in the coupled regime. The addition of a small amount of heavy element in a light material has a dramatic effect on viscosity and diffusion of the mixture. This effect is explained through kinetic theory as a manifestation of a crossover between classical diffusion and Lorentz diffusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Helium diffusion in stars and the value of the cosmological constant

The effect of He diffusion on the evolution of stars is to speed it up by increasing the mean atomic weight at the center, thereby minimizing the apparent conflict between the great ages of globular clusters and the age of the universe, as arrived at via the Hubble constant. Attention is presently given to the consequences of work on this effect by Noerdlinger and Arrigo (1980) and Stringfellow et al. (1983), implying that Tayler's (1986) estimate for globular clusters of 16 Gyr should be reduced to 13 Gyr.

Noerdlinger, Peter↗