Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Investigation of magnetic noise from conductive shields in the 10–300 kHz frequency range

Here we present experimental and theoretical investigations of magnetic noise originating from radio-frequency (RF) conductive shields of flat geometry in the inductance-dominated impedance regime below 300 kHz. The measurement is based on a Q-factor determination of a coil that provides a sufficient sensitivity, placed at the position where the shield magnetic noise is measured. The theory is based on calculations of magnetic field and inductance of one or a few flat rings that emulate a conductive shield. The theoretical model is found to be in close agreement with experimental data. It can be used to predict the magnetic noise of a conductive shield with different thicknesses, conductivities, and temperatures at different distances for a wide range of frequencies. Although the model can be generalized for a more arbitrary shield geometry, in its presented form, it can be applied to the magnetic noise predictions when the shield surface curvature is not large. One important conclusion is that the RF conductive shield can generate the magnetic noise much lower than femtotesla, and, thus, it can be used in many precision experiments targeting minute high-frequency magnetic signals, such as detection of magnetic resonance imaging and nuclear quadrupole resonance signals and search for axion dark matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Measuring sub-surface spatially varying thermal conductivity of silicon implanted with krypton

The thermal properties of semiconductors following exposure to ion irradiation are of great interest for the cooling of electronic devices; however, gradients in composition and structure due to irradiation often make the measurement difficult. Furthermore, the nature of spatial variations in thermal resistances due to spatially varying ion irradiation damage is not well understood. In this work, we develop an advancement in the analysis of time-domain thermoreflectance to account for spatially varying thermal conductivity in a material resulting from a spatial distribution of defects. We then use this method to measure the near-surface (≲1 μm) thermal conductivity of silicon wafers irradiated with Kr + ions, which has an approximate Gaussian distribution centered 260 nm into the sample. Our numerical analysis presented here allows for the spatial gradient of thermal conductivity to be extracted via what is fundamentally a volumetric measurement technique. We validate our findings via transmission electron microscopy, which is able to confirm the spatial variation of the sub-surface silicon structure, and provide additional insight into the local structure resulting from the effects of ion bombardment. Thermal measurements found the ion stopping region to have a nearly 50x reduction in thermal conductivity as compared to pristine silicon, while TEM showed the region was not fully amorphized. Our results suggest this drastic reduction in silicon thermal conductivity is primarily driven by structural defects in crystalline regions along with boundary scattering between amorphous and crystalline regions, with a negligible contribution being due to implanted krypton ions themselves.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermal conductivity evaluation of ion irradiated Si 3 N 4 and ZrN ceramics using spatial domain thermoreflectance

Nitride ceramics have been investigated for different applications in the nuclear industry, such as space nuclear power, fusion reactor diagnostics and plasma heating, inert matrix fuels, and accident tolerant fuels. Although thermal conductivity remains one of the most important properties to track following irradiation, traditional techniques such as laser flash and xenon flash are limited to bulk sample characterization, which requires lengthy and cost-consuming neutron irradiation. This work used spatial domain thermoreflectance (SDTR) for the micrometer-scale measurement of thermal conductivity in 15 MeV Ni ion-irradiated silicon nitride and zirconium nitride from 1 to 50 dpa and 300 to 700 °C. Here, the SDTR-measured unirradiated thermal conductivity was found to be consistent with the published data on bulk samples. Electrically conductive ZrN exhibits modest reduction after irradiation which is minimal at the highest irradiation temperatures. In electrically insulating Si 3 N 4 , the reduction is more significant and unlike ZrN, the reduction remains significant even at a higher irradiation temperature. The thermal resistance evolution following irradiation was compared with lattice swelling, which was determined using grazing incidence x-ray diffraction, and radiation-induced defects were observed using transmission electron microscopy. A saturation value was observed between 15 and 50 dpa for thermal conductivity degradation in both nitride ceramics and a direct correlation with high-temperature defect recombination was observed, as well as the potential presence of additional carrier scattering mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Conductivity and dissociation in liquid metallic hydrogen and implications for planetary interiors

Liquid metallic hydrogen (LMH) is the most abundant form of condensed matter in our solar planetary structure. The electronic and thermal transport properties of this metallic fluid are of fundamental interest to understanding hydrogen’s mechanism of conduction, atomic or pairing structure, as well as the key input for the magnetic dynamo action and thermal models of gas giants. Here, we report spectrally resolved measurements of the optical reflectance of LMH in the pressure region of 1.4–1.7 Mbar. We analyze the data, as well as previously reported measurements, using the free-electron model. Fitting the energy dependence of the reflectance data yields a dissociation fraction of 65 ± 15%, supporting theoretical models that LMH is an atomic metallic liquid. We determine the optical conductivity of LMH and find metallic hydrogen’s static electrical conductivity to be 11,000–15,000 S/cm, substantially higher than the only earlier reported experimental values. Here, the higher electrical conductivity implies that the Jovian and Saturnian dynamo are likely to operate out to shallower depths than previously assumed, while the inferred thermal conductivity should provide a crucial experimental constraint to heat transport models.

08 HYDROGEN↗
DOE OSTI2019

Highly conductive and chemically stable alkaline anion exchange membranes via ROMP of trans -cyclooctene derivatives

Alkaline anion exchange membranes (AAEMs) are an important component of alkaline exchange membrane fuel cells (AEMFCs), which facilitate the efficient conversion of fuels to electricity using nonplatinum electrode catalysts. However, low hydroxide conductivity and poor long-term alkaline stability of AAEMs are the major limitations for the widespread application of AEMFCs. In this paper, we report the synthesis of highly conductive and chemically stable AAEMs from the living polymerization of trans -cyclooctenes. A trans -cyclooctene–fused imidazolium monomer was designed and synthesized on gram scale. Using these highly ring-strained monomers, we produced a range of block and random copolymers. Surprisingly, AAEMs made from the random copolymer exhibited much higher conductivities than their block copolymer analogs. Investigation by transmission electron microscopy showed that the block copolymers had a disordered microphase segregation which likely impeded ion conduction. A cross-linked random copolymer demonstrated a high level of hydroxide conductivity (134 mS/cm at 80 °C). More importantly, the membranes exhibited excellent chemical stability due to the incorporation of highly alkaline-stable multisubstituted imidazolium cations. No chemical degradation was detected by 1 H NMR spectroscopy when the polymers were treated with 2 M KOH in CD 3 OH at 80 °C for 30 d.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Modelling the evolution of complex conductivity during calcite precipitation on glass beads

When pH and alkalinity increase, calcite frequently precipitates and hence modifies the petrophysical properties of porous media. The complex conductivity method can be used to directly monitor calcite precipitation in porous media because it is sensitive to the evolution of the mineralogy, pore structure and its connectivity. Here, we have developed a mechanistic grain polarization model considering the electrochemical polarization of the Stern and diffuse layers surrounding calcite particles. Our complex conductivity model depends on the surface charge density of the Stern layer and on the electrical potential at the onset of the diffuse layer, which are computed using a basic Stern model of the calcite/water interface. The complex conductivity measurements of Wu et al. on a column packed with glass beads where calcite precipitation occurs are reproduced by our surface complexation and complex conductivity models. The evolution of the size and shape of calcite particles during the calcite precipitation experiment is estimated by our complex conductivity model. At the early stage of the calcite precipitation experiment, modelled particles sizes increase and calcite particles flatten with time because calcite crystals nucleate at the surface of glass beads and grow into larger calcite grains. Finally, at the later stage of the calcite precipitation experiment, modelled sizes and cementation exponents of calcite particles decrease with time because large calcite grains aggregate over multiple glass beads and only small calcite crystals polarize.

58 GEOSCIENCES↗
DOE OSTI2026

Generalized Hall conductivities in local commuting projector models: Generalized symmetries and protected surface modes

Hall conductivities are important characterizations of phases of matter. It is known that nonzero Hall conductivities are difficult to realize in local commuting projector lattice models due to no-go theorems in (2+1)⁢D. In this work we construct local commuting projector models in (2+1)⁢D and (3+1)⁢D with nonzero generalized Hall conductivities for ordinary and higher-form continuous symmetries on tensor product Hilbert space of finite local dimension. The model is given by a standard ℤ 𝑁 toric code, but the symmetries do not admit expression in terms of on-site charge operators. The symmetry do not have local charges or currents on the lattice in the absence of boundaries, but there is still a notion of Hall conductivities that coincide with the continuum field theories. We construct protected gapless boundaries of the lattice models using modified Villain formalism. The generalized Hall conductivities are computed by surface currents as well as bulk flux insertion and many-body Chern number.

Anomalies↗
DOE OSTI2017

Dependence of the Thermal Conductivity of BiFeO 3 Thin Films on Polarization and Structure

The role of the ferroelectric polarization state and crystal structure in determining the room-temperature thermal conductivity of epitaxial BiFeO 3 thin films is investigated. The ferroelectric domain configuration is varied by changing the oxygen partial pressure during growth, as well as by polarizing the samples by the application of an in situ electric field during the thermal conductivity measurement. However, little or no dependence of thermal conductivity on the ferroelectric domain structure is observed. In contrast, the thermal conductivity significantly depends on the morphotropic phase structure, being about 2/3 as large in tetragonal-like compared to rhombohedral-like BiFeO 3 film. As a result, the substantial structural dependence of thermal conductivity found here may provide a route to reversible manipulation of thermal properties.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Enhancement of hopping conductivity by spontaneous fractal ordering of low-energy sites

Variable-range hopping conductivity has long been understood in terms of a canonical prescription for relating the single-particle density of states to the temperature-dependent conductivity. Here we demonstrate that this prescription breaks down in situations where a large and long-ranged random potential develops. In particular, we examine a canonical model of a completely compensated semiconductor, and we show that at low temperatures hopping proceeds along self-organized, low-dimensional subspaces having fractal dimension d = 2. We derive and study numerically the spatial structure of these subspaces, as well as the conductivity and density of states that result from them. One of our prominent findings is that fractal ordering of low energy sites greatly enhances the hopping conductivity and allows Efros-Shklovskii type conductivity to persist up to unexpectedly high temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Phonon thermal conductance across GaN-AlN interfaces from first principles

The vibrational thermal conductances (G) across GaN-AlN interfaces are computed using a nonequilibrium Green's function formalism in the harmonic limit with bulk and interfacial interatomic force constants (IFCs) fully from density functional theory. Several numerical methods and supercell configurations are employed to examine the sensitivity of G to variances of IFCs. In particular, the effects of supercell size, the enforcement of symmetry constraints, and truncation of IFCs near the interface, and atomic relaxation on phonon transmission and conductance are explored. Our fully first-principles calculations are compared with common approximations and measured G values inferred from thermal conductivity measurements for GaN-AlN superlattices. Here, our calculated value, G~300MWm -2 K -1 , is nearly half that from measurements. This discrepancy is critically analyzed in terms of the physical assumptions of the calculations and the derivation of the experimental values. This work provides guidelines to determine “physically correct” sets of interfacial IFCs from first principles for thermal conductance calculations using minimal computational resources. It also contributes toward developing predictive calculations and a more complete picture of thermal conduction across interfaces, a step toward first-principles multiscale thermal transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Low-temperature anharmonicity and the thermal conductivity of cesium iodide

Cesium halide has a simple cubic crystal structure and hosts low thermal conductivity, but its microscopic mechanism has not been fully understood. Here, we took cesium iodide (CsI) single crystal as an example, to investigate the lattice dynamics and thermal conductivity by performing inelastic neutron scattering (INS), heat transport measurements, and first-principles calculations. The temperature dependent phonon dispersions of CsI were obtained from INS and the low temperature anharmonicity of transverse optic (o) and transverse acoustic (a) phonon modes in CsI was observed. By performing the thermal conductivity measurement and first-principles calculations, it is shown that the low thermal conductivity of CsI originates from the combined effect of the small phonon group velocities and the large phonon scattering rates, which is dominated by the (a,a,a) and (a,a,o) phonon scattering processes. Lastly, this work highlights the importance of phonon anharmonicity in lattice dynamics, which sheds light on the design of materials with low thermal conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Comment on “Isochoric, isobaric, and ultrafast conductivities of aluminum, lithium, and carbon in the warm dense matter regime”

Dharma-wardana et al . [M. W. C. Dharma-wardana et al., Phys. Rev. E 96, 053206 (2017)] recently calculated dynamic electrical conductivities for warm dense matter as well as for nonequilibrium two-temperature states termed “ultrafast matter” (UFM) [M. W. C. Dharma-wardana, Phys. Rev. E 93, 063205 (2016)]. In this Comment we present two evident reasons why these UFM calculations are neither suited to calculate dynamic conductivities nor x-ray Thomson scattering spectra in isochorically heated warm dense aluminum. First, the ion-ion structure factor, a major input into the conductivity and scattering spectra calculations, deviates strongly from that of isochorically heated aluminum. Second, the dynamic conductivity does not show a non-Drude behavior which is an essential prerequisite for a correct description of the absorption behavior in aluminum. In addition, we clarify misinterpretations by Dharma-wardana et al. concerning the conductivity measurements of Gathers [G. R. Gathers, Int. J. Thermophys. 4, 209 (1983)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Stability and conductivity of cation- and anion-substituted LiBH 4 -based solid-state electrolytes

The high-temperature phase of LiBH 4 (HT-LiBH 4 ) exhibits a promisingly high lithium ion conductivity but is unstable at room temperature. We use density functional theory (DFT) calculations to investigate the stabilization effect of halogen and alkali cation/anion substitutions on HT-LiBH 4 as well the underlying mechanism for the high lithium ion conductivity. We find that increasing the substituent concentration enhances the stabilization of HT-LiBH 4 (i.e., the DFT energy difference between the low- and high-temperature forms of substituted LiBH 4 is reduced). Cation/anion substitution also leads to a higher Li defect (vacancy, interstitial, and Frenkel) formation energy, thereby reducing the Li defect (vacancy, interstitial, and Frenkel) concentrations. Using DFT migration barriers input into kinetic Monte Carlo simulations and the Materials INTerface (MINT) framework, here we calculate the room-temperature lithium ion conductivities for Li(BH 4 ) 1-x I x (x = 0.25 and 0.5) and Li 1-y K y BH 4 (y = 0.25). Our calculations suggest that the lower I concentration leads to a higher lithium ion conductivity of 5.7 x10 -3 S/cm compared with that of Li(BH 4 ) 0.5 I 0.5 (4.2 ×10 -5 S/cm) because of the formation of more Li-related defects. Based on our findings, we suggest that the stabilization of HT-LiBH 4 -based lithium ion conductors can be controlled by carefully tuning the cation/anion substituent concentrations to maximize the lithium ionic conductivities of the specific system.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Phase Relationship and Ionic Conductivity in Na–SrSiO 3 Ionic Conductor

The Na–SrSiO 3 as a potential high‐conductivity ionic conductor for intermediate temperature solid oxide electrochemical cells (SOECs) has drawn much attention recently. Some of these studies questioned the feasibility of Na doping and therefore the creation of oxygen vacancies, while others suggested an alternative phase responsible for the ionic conduction. In this study, a systematic investigation was carried out to understand the ionic conduction in Na–SrSiO 3 . Through in situ high‐temperature X‐ray diffraction, thermal analysis, microstructural characterization, and electrical conductivity measurement, Na–SrSiO 3 was shown as a two‐phase material, one being slightly Na‐doped SrSiO 3 and another being amorphous Na 2 Si 2 O 5 . The former was an electrical insulator whereas the latter was a good ionic conductor. It was also found that the amorphous Na 2 Si 2 O 5 phase was unstable at the temperature ≥500°C, crystallizing into the insulating polycrystalline Na 2 Si 2 O 5 which causes conductivity to “bend‐over” at higher temperatures. A preliminary Ab Initio Molecular Dynamics ( AIMD ) simulation suggested that the amorphous Na 2 Si 2 O 5 be predominantly a Na + conductor.

Jee, Youngseok↗
DOE OSTI2017

Determination of heat conductivity of waste glass feed and its applicability for modeling the batch-to-glass conversion

The heat conductivity of reacting melter feed affects the heat transfer and conversion process in the cold cap (the reacting feed floating on molten glass). To investigate it, we simulated the feed conditions and morphology in the cold-cap by preparing “fast-dried slurry blocks”, formed by rapidly evaporating water from feed slurry poured onto a 200°C surface. A heat conductivity meter was used to measure heat conductivity of samples cut from the fast-dried slurry blocks, samples of a cold cap retrieved from a laboratory-scale melter, and loose dry powder feed samples. Our study indicates that the heat conductivity of the feed in the cold cap is significantly higher than that of loose dry powder feed, resulting from the feed solidification during the water evaporation from the feed slurry. To assess the heat transfer at higher temperatures when feed turns into foam, we developed a theoretical model that predicts the foam heat conductivity based on morphology data from in-situ X-ray computed tomography. The implications for the mathematical modeling of the cold cap are discussed.

Hujova, Miroslava↗
DOE OSTI2020

Temperature and processing effects on lithium ion conductivity of solution‐deposited lithium zirconium phosphate (LiZr 2 P 3 O 12 ) thin films

Abstract Lithium zirconium phosphate (LiZr 2 P 3 O 12 ) thin films have been prepared on platinized silicon substrates via a chemical solution deposition approach with processing temperatures between 700°C and 775°C. Films that were subject to a single high‐temperature anneal were found to crystallize at temperatures above 725°C. Crystallization was observed in films annealed after each deposited layer at 700°C and above. In both cases, grain size was found to increase with annealing temperature. Ion conductivity was found to increase with annealing temperature in singly annealed films. In per‐layer annealed films ion conductivity was found to initially increase then decrease with increasing annealing temperature. A maximum ion conductivity of 1.6 × 10 −6 S/cm was observed for the singly annealed 775°C condition, while a maximum ion conductivity of 5.8 × 10 −7 S/cm was observed for the 725°C per‐layer annealed condition. These results are consistent with an increasing influence of cross‐plane, internal interface resistance and vapor phase carrier loss in the per‐layer annealed samples. This work demonstrates that post‐deposition processing methods can strongly affect the ion conducting properties of LiZr 2 P 3 O 12 thin films.

Brummel, Ian A.↗
DOE OSTI2015

Conductivity and touch-sensor application for atomic layer deposition ZnO and Al:ZnO on nylon nonwoven fiber mats

Flexible electronics and wearable technology represent a novel and growing market for next generation devices. In this work, the authors deposit conductive zinc oxide films by atomic layer deposition onto nylon-6 nonwoven fiber mats and spun-cast films, and quantify the impact that deposition temperature, coating thickness, and aluminum doping have on the conductivity of the coated substrates. The authors produce aluminum doped zinc oxide (AZO) coated fibers with conductivity of 230 S/cm, which is ∼6× more conductive than ZnO coated fibers. Furthermore, the authors demonstrate AZO coated fibers maintain 62% of their conductivity after being bent around a 3 mm radius cylinder. As an example application, the authors fabricate an “all-fiber” pressure sensor using AZO coated nylon-6 electrodes. The sensor signal scales exponentially under small applied force (<50 g/cm{sup 2}), yielding a ∼10{sup 6}× current change under 200 g/cm{sup 2}. This lightweight, flexible, and breathable touch/force sensor could function, for example, as an electronically active nonwoven for personal or engineered system analysis and diagnostics.

42 ENGINEERING↗
DOE OSTI2016

Low temperature platinum atomic layer deposition on nylon-6 for highly conductive and catalytic fiber mats

Low temperature platinum atomic layer deposition (Pt-ALD) via (methylcyclopentadienyl)trimethyl platinum and ozone (O{sub 3}) is used to produce highly conductive nonwoven nylon-6 (polyamide-6, PA-6) fiber mats, having effective conductivities as high as ∼5500–6000 S/cm with only a 6% fractional increase in mass. The authors show that an alumina ALD nucleation layer deposited at high temperature is required to promote Pt film nucleation and growth on the polymeric substrate. Fractional mass gain scales linearly with Pt-ALD cycle number while effective conductivity exhibits a nonlinear trend with cycle number, corresponding to film coalescence. Field-emission scanning electron microscopy reveals island growth mode of the Pt film at low cycle number with a coalesced film observed after 200 cycles. The metallic coating also exhibits exceptional resistance to mechanical flexing, maintaining up to 93% of unstressed conductivity after bending around cylinders with radii as small as 0.3 cm. Catalytic activity of the as-deposited Pt film is demonstrated via carbon monoxide oxidation to carbon dioxide. This novel low temperature processing allows for the inclusion of highly conductive catalytic material on a number of temperature-sensitive substrates with minimal mass gain for use in such areas as smart textiles and flexible electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗