Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Composite Material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

MXene Reinforced Thermosetting Composite for Lightning Strike Protection of Carbon Fiber Reinforced Polymer

Ti 3 C 2 – a member of the MXenes (2D transition metal carbides and nitrides) family, is investigated as an effective filler to improve the electrical, mechanical, and thermal properties of divinylbenzene (DVB) thermosetting resin. Consequently, its performance as a lightning strike protection (LSP) coating for carbon fiber reinforced polymer (CFRP) is evaluated. Polyaniline (PANI) – dodecylbenzene sulfonic acid (DBSA) complex is used to cure the DVB resin. The synergic effect of MXenes (with surface that is negatively charged) with polyaniline (positive charge) shows electrostatic bonding and improved electrical conductivity in the composite. We also find that the addition of MXenes at 2 wt% into the PANI-DVB composite shows ≈139%, 10%, and 9% improvement in electrical conductivity, flexural strength, and flexural modulus, respectively, compared to the neat PANI-DVB composite. The composites are investigated using various material characterization techniques including Fourier transforms infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. Furthermore, MXenes-DVB is utilized to create a conductive thermosetting coating on top of a CFRP substrate and tested against a lightning strike of 100 kA. CFRP with MXenes-DVB coating reduced the surface damage from 40.61 cm 2 (reference CFRP panel) to 13.29 cm 2 (CFRP coated with MXenes-DVB).

36 MATERIALS SCIENCE↗
DOE OSTI2021

Post-landing major element quantification using SuperCam laser induced breakdown spectroscopy

The SuperCam instrument on the Perseverance Mars 2020 rover uses a pulsed 1064 nm laser to ablate targets at a distance and conduct laser induced breakdown spectroscopy (LIBS) by analyzing the light from the resulting plasma. SuperCam LIBS spectra are preprocessed to remove ambient light, noise, and the continuum signal present in LIBS observations. Prior to quantification, spectra are masked to remove noisier spectrometer regions and spectra are normalized to minimize signal fluctuations and effects of target distance. In some cases, the spectra are also standardized or binned prior to quantification. To determine quantitative elemental compositions of diverse geologic materials at Jezero crater, Mars, we use a suite of 1198 laboratory spectra of 334 well-characterized reference samples. The samples were selected to span a wide range of compositions and include typical silicate rocks, pure minerals (e.g., silicates, sulfates, carbonates, oxides), more unusual compositions (e.g., Mn ore and sodalite), and replicates of the sintered SuperCam calibration targets (SCCTs) onboard the rover. For each major element (SiO 2 , TiO 2 , Al 2 O 3 , FeO T , MgO, CaO, Na 2 O, K 2 O), the database was subdivided into five “folds” with similar distributions of the element of interest. One fold was held out as an independent test set, and the remaining four folds were used to optimize multivariate regression models relating the spectrum to the composition. We considered a variety of models, and selected several for further investigation for each element, based primarily on the root mean squared error of prediction (RMSEP) on the test set, when analyzed at 3 m. In cases with several models of comparable performance at 3 m, we incorporated the SCCT performance at different distances to choose the preferred model. Shortly after landing on Mars and collecting initial spectra of geologic targets, we selected one model per element. Subsequently, with additional data from geologic targets, some models were revised to ensure results that are more consistent with geochemical constraints. The calibration discussed here is a snapshot of an ongoing effort to deliver the most accurate chemical compositions with SuperCam LIBS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Design of functional materials based on new principles of disorder. Final Report

Disorder is present to some extent in every material. The disorder can be sparse and localized – individual defects – or globally such as in a glass. Normally disorder is considered to be detrimental to function. However, this is not necessarily always the case. This project addressed the question: How does disorder provide new potentialities for the behavior of a material that would be absent in a crystalline material of the same composition? We have discovered a new principle for disordered matter: Independence of bond-level response. This work has introduced the possibility of creating new classes of mechanical meta-materials with applications everywhere from microscopic biological molecules (allostery) to large scale architectural disordered networks. During the course of this grant, we have subsequently elaborated on these novel ideas about bond-level independence of properties in disordered materials. In particular, this study has required that we understand the limits of disorder. That is, if crystals are perfect order, is there another diametrically opposed pole which is the most disordered state? We have shown that, in a well-defined way, jamming is one extreme disordered pole of rigid matter. Jamming is a far-from-equilibrium way of creating a rigid solid by rapidly quenching a random distribution of particles to a mechanically stable system at zero temperature. To understand the jammed state of matter, we have elucidated the low-frequency excitation of these systems. This has allowed a new way of understanding materials that cannot be easily classified as crystals or glasses. These ideas can be extended to address the mechanical properties of polycrystalline matter. Memory formation in matter can take inspiration from memory that occurs in a biological context. The issue of memory formation raises another set of questions at the heart of how the energy landscape is organized and how it can be manipulated to store information in a solid. This project has explored how to understand the degree to which multiple memories can be stored in a single system and has created a holistic understanding of how inputs can be used to create a desired response.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Materials (FY 2022 Annual Progress Report)

This document summarizes the progress of VTO Materials R&D projects supported during the fiscal year 2022. The Propulsion Materials portfolio is closely aligned with other VTO subprograms to identify critical materials needs for next-generation high-efficiency powertrains for both heavy- and light-duty vehicles. The Lightweight Materials portfolio works closely with industry through the U.S. DRIVE Partnership to understand light-duty vehicle structural weight-reduction goals and identify technical challenges that prevent the deployment of lightweight materials.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Metal sensitized color changing material

The subject invention pertains to color changeable, film materials comprising a metal substrate layer; a conducting polymer or conducting polymer composite layer; and an electrolyte layer. The conducting polymer or conducting polymer composite layer of the film material is capable of exhibiting changes in one or more optical properties when the film material is in contact with a metal. The subject invention also pertains to methods of preparing conducting polymer films capable of exhibiting changes in optical properties.

Ram, Manoj Kumar↗
DOE OSTI2024

Passive Temperature Sensors for Nuclear Applications

Thermocouples are generally used to provide real-time temperature indications in instrumented tests performed at material and test reactors. Passive temperature monitors, such as Silicon Carbide (SiC) and melt wires, may be included in such tests as an independent technique of detecting peak temperatures experienced during irradiation. In less expensive static (drop-in) capsule tests, which have no leads attached for real-time data transmission, melt wires, and SiC temperature monitors (TMs) are essentially the only possibility for peak temperature indication. A melt wire involves placing materials (wires) of a known composition and melting temperature in a test. An inventory is maintained at Material Science Laboratory (MSL) for melt wires ranging in temperatures from 30°C to 1500°C. Unfortunately, melt wires are limited in that it can only detect whether a single temperature is or is not exceeded (melt wire melted or not). SiC TMs, which can also be used to detect peak irradiation temperatures, are advantageous because a single monitor can allow to determine the peak temperature reached within a relatively broad range (100 – 1200°C) resulting in accuracies within ±20°C. Irradiation temperature is determined by measuring a property change after isochronal annealing or during a continuously monitored annealing process using specialized equipment at MSL. Recent research has produced a passive monitor known as sublime temperature monitor. This passive sensor has the capability of recording temperature gradients and pinpointing exactly where a temperature is located along that gradient. Long measurement lengths are achieved with very high accuracy in the location of desired temperature measurements (±2 mm over a 1 m span); however, this sensor has not been deployed in a nuclear reactor. This article will focus only on passive temperature sensors currently being researched and implemented under the Advanced Sensors and Instrumentation (ASI) program at Idaho National Laboratory (INL).

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Twists and Puckers: Tuning Crystal Chemistry in the La(Au x Ge 1– x ) 2 Compositional Series

The physical properties of solid-state materials are closely tied to their crystal structure, yet our understanding of how competing structural arrangements energetically compare is limited. In this work, we explore how small differences in composition affect structure in the La(Au x Ge 1-x ) 2 series of compounds, comprising four unique structure types between LaGe 2 and LaAu 2 . This family includes the previously unknown AlB2-type compound with the stoichiometry La(Au 0.375 Ge 0.625 ) 2 , as well as La(Au 0.25 Ge 0.75 ) 2 , an intergrowth of the AlB 2 and ThSi 2 structure types. We then study the chemical forces driving the structure changes, including using phonon band structure calculations and DFT Chemical Pressure to evaluate atomic size effects. These calculations show that the parent AlB 2 structure type is disfavored in Au-rich compounds due to soft atomic motions along the c axis. The instability of AlB 2 -type LaAuGe is confirmed by the presence of imaginary modes in the phonon band structure that correspond to a ‘puckering’ of the hexagonal AlB 2 -type lattice, resulting in the experimentally observed LiGaGe structure type. The impact of size effects is less clear for Au-poor compositions; instead, ‘twisting’ the AlB 2 structure type to form the ThSi 2 type opens a pseudogap at the Fermi level in the electronic density of states. Here, this investigation demonstrates how crystal structure in solid-state materials can be compositionally tuned based on balancing size and electronics when multiple structure types are in close thermodynamic competition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Improved Performance of Cu(InGa)(SeS) 2 PV Modules Using the Reaction of Metal Precursors. Final Report

This project “Improved Performance of Cu(InGa)(SeS) 2 PV Modules using the Reaction of Metal Precursors” was a partnership led by the Institute of Energy Conversion (IEC) at the University of Delaware with Columbia University and the Molecular Foundry at the Lawrence Berkeley National Laboratory. The aim was to develop pathways to improve Cu(InGa)(SeS) 2 (CIGSS) thin film photovoltaic modules using processes compatible with low manufacturing cost. The CIGSS approach investigated was a two-step process including deposition of metal precursor films following by reaction in hydride gases utilizing IEC’s novel reactor. The process was similar to that under commercial development by the project’s industry partner Stion. When Stion went out of business mid-project the focus changed to a rapid thermal process considered more commercially viable. Approaches to improve the performance of solar cells using the reacted films focused on two material innovations. First, the overall Ga content was increased to increase the operating voltage, which is desirable for scale-up to commercial modules. Second, the processing and performance advantages arising from Ag alloying were investigated. Advanced characterization guided process and material development including control of relative composition gradients. Research on the formation of Cu-Ga-In metal precursors utilized sputtering deposition which is normally used in commercial applications. The work resulted in processes for deposition of precursor stacks with increased relative Ga content and effects of deposition parameters on morphology and phase composition were established. It was shown that the metal precursor films have comparable phase composition and morphology so subsequent reaction follows from the same starting point. The addition of Ag to the metal precursors gave more uniform morphology and improved adhesion of reacted films which enable higher reaction temperature for faster processing. A novel outcome was the discovery of a previously undocumented material phase in sputter-deposited and evaporated Ag-Cu-In-Ga thin films. Hydride gas reaction processes including time-temperature-concentration profiles were developed for different precursor compositions. This enables control of composition profiles to engineer through-film gradients for solar cell optimization with characterization and simulations used to correlate measured film composition profiles to measurements of devices. In particular, the gradient of sulfur at the front of the CIGSS film was found to be critical. The simulations guided process development leading to improved reproducibility of devices improved performance with higher Ga content and higher voltage. With Ag-alloyed precursors, the reaction pathways leading were determined. A significant finding was that Ag-alloying increases the reaction rate to completely convert precursor films to the final chalcopyrite which could enable reduced reaction time to benefit manufacturability. To maintain potential commercial viability, the process under investigation was refocused to a rapid thermal process that could potentially be incorporated into an in-line process for manufacturing. Precursors with different composition were capped with an extra selenium layer and reacted in hydrogen sulfide 5-15 minutes, compared to typically 2 hours in the previous multi-step batch process. Critical RTP parameters were identified to control the reaction. Further optimization would be needed for high efficiency solar cells but pathways to high quality devices with further optimization and improved heating uniformity were developed. The project also developed new optoelectronic characterization approaches with a focus on development and application of spatial- and time-resolved photoluminescence and a custom mapping photoluminescence microscope built. It was shown how critical electronic transport properties strongly depend on the chemical composition of the material and that a wide range of samples show inhomogeneity on a length scale larger than the grains in the films. Additionally, two-photon excitation capability was developed to distinguish bulk vs surface losses. The project advances the state-of-the -art for precursor reaction processes in several ways that could impact manufacturing. This includes validation of approaches to increase voltage and establishment of model-guided control to form optimal composition profiles. The application of process control approaches with knowledge of phase formation and reaction pathways can be critically valuable in designing a large-scale process.

14 SOLAR ENERGY↗
DOE OSTI2021

In situ synchrotron X-ray imaging and mechanical properties characterization of additively manufactured high-entropy alloy composites

Laser beam directed energy deposition has become an increasingly popular advanced manufacturing technique for materials discovery as a result of the in situ alloying capability. In this study, we leverage an additive manufacturing enabled high throughput materials discovery approach to explore the composition space of a graded W x (CoCrFeMnNi) 100–x sample spanning 0 ≤ x ≤ 21 at%. In addition to microstructural and mechanical characterization, synchrotron high speed x-ray computer aided tomography was conducted on a W 20 (CoCrFeMnNi) 80 composition to visualize melting dynamics, powder-laser interactions, and remelting effects of previously consolidated material. Results reveal the formation of the Fe 7 W 6 intermetallic phase at W concentrations> 6 at%, despite the high configurational entropy. Unincorporated W particles also occurred at W concentrations> 10 at% accompanied by a dissolution band of Fe 7 W 6 at the W/matrix interface and hardness values greater than 400 HV. In this work, the primary strengthening mechanism is attributed to the reinforcement of the Fe 7 W 6 and W phases as a metal matrix composite. The in situ high speed x-ray imaging during remelting showed that an additional laser pass did not promote further mixing of the Fe 7 W 6 or W phases suggesting that, despite the dissolution of the W into the Fe 7 W 6 phase being thermodynamically favored, it is kinetically limited by the thickness/diffusivity of the intermetallic phase, and the rapid solidification of the laser-based process.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Analyzing the impact of design factors on solar module thermomechanical durability using interpretable machine learning techniques

Solar modules in utility-scale systems are expected to maintain decades of lifetime to rival conventional energy sources. However, cyclic thermomechanical loading often degrades their long-term performance, highlighting the importance of effective design to mitigate thermal expansion mismatches between module materials. Given the complex composition of solar modules, isolating the impact of individual components on overall durability remains a challenging task. In this work, we analyze a comprehensive data set that comprises bill-of-materials (BOM) and thermal cycling power loss from 251 distinct module designs to identify the predominant design factors and their impacts on the thermomechanical durability of modules. The methodology of our analysis combines machine learning modeling (random forest) and Shapley additive explanation (SHAP) to correlate design factors with power loss and interpret the model’s decision-making. The interpretation reveals that silicon type (monocrystalline or polycrystalline), encapsulant thickness, busbar numbers, and wafer thickness predominantly influence the degradation. With lower power loss of around 0.6% on average in the SHAP analysis, monocrystalline cells present better durability than polycrystalline cells. This finding is further substantiated by statistical testing on our raw data set. The SHAP analysis also demonstrates that while thicker encapsulants lead to reduced power loss, further increasing their thickness over around 0.6 to 0.7 mm does not yield additional benefits, particularly for the front side one. In addition, other important BOM features such as the number of busbars are analyzed. This study provides a blueprint for utilizing explainable machine learning techniques in a complex material system and can potentially guide future research on optimizing the design of solar modules.

14 SOLAR ENERGY↗
DOE OSTI2021

Elucidating the Redox Behavior during Atomic Layer Deposition on Lithium-Ion Battery Cathode Materials

Atomic layer deposition (ALD) has emerged as a promising technology for applying ultrathin protective coatings on lithium-ion battery (LIB) cathode surfaces to improve their cycling stability. While there have been numerous reports evaluating the electrochemical performance of these surface-modified cathode materials, the chemical changes induced on the surface of the cathode materials upon ALD coating are not fully studied. This paper describes a systematic investigation to understand the interfacial changes of 12 different cathode materials upon coating with aluminum oxide (Al 2 O 3 ) using trimethyl aluminum (TMA) and H 2 O, and aluminum fluoride (AlF 3 ) using TMA and hydrogen fluoride pyridine (HFPy). Here, the surface composition of these cathode materials, which range from simple transition metal oxides (e.g. NiO and MnO) to complex multi-element cathode materials (e.g. LiNi x Mn 1-x-y Co y O 2 , NMC), was studied via X-ray photoelectron spectroscopy (XPS). The XPS measurements reveal that the transition metals in the cathode materials undergo selective oxidation/reduction depending upon the nature of the precursor, the coating, and the cathode material. The ability to chemically modify the surface of cathode materials via vapor-phase precursor adsorption will open new avenues to systematically control the interface of the cathode materials in LIBs that are not possible by conventional coating methods.

25 ENERGY STORAGE↗
DOE OSTI2020

In Situ Structural and Electrical Conductivity Characterization of Sr2MMoO6-δ Double Perovskite Solid Oxide Fuel Cell Anode Materials

In this study, a series of Sr 2 MMoO 6-δ double perovskite solid oxide fuel cell (SOFC) anode materials (where 0 <= δ <= 0.041 and M = Fe, Co, or Ni) were synthesized, and the changes in their morphologies under relevant SOFC operating conditions were explored. Ultra-small-angle X-ray scattering (USAXS), small-angle X-ray scattering (SAXS), and wide-angle X-ray scattering (WAXS) were used to determine changes in the microstructures and phase compositions of the anode materials at high temperatures and under a reducing atmosphere. The stability of the double perovskite structure was found to be highly dependent on the identity of the cation M, such that when M = Fe, the material remained stable over the course of the experiments. However, when M = Co or Ni, significant changes in the microstructure and phase composition were observed. An in situ study of the M = Co sample, in which electrical conductivity and USAXS/SAXS/WAXS measurements were conducted simultaneously, revealed the structural degradation mechanisms and electrical conductivity changes over a range of temperatures. To conduct these measurements, a cell was developed that allowed for a sample mounted on Pt wires to be placed in the X-ray beam and heated under gas flow comprising 4% mass H 2 and 96% mass N 2 . The resulting measurements allowed for the direct comparison of the electrical and morphological changes occurring in the material under operating conditions, such that increases in conductivity could be attributed to the growth of new phases.

25 ENERGY STORAGE↗
DOE OSTI2025

A deep learning and finite element approach for exploration of inverse structure–property designs of lightweight hybrid composites

Hybrid composites have important applications, such as high-performance and lightweight materials in aerospace and automotive industries. Hybrid composites utilize the synergy of diverse fillers to achieve desired material properties, but usually have more complicated microstructures. While topology optimization can optimize a particular property, designing hybrid composites for customized mechanical performances, e.g. full-range stress–strain curve, remains challenging. Here, a computational framework that integrated finite element analysis (FEA) and artificial intelligence (AI) methods of Conditional Generative Adversarial Networks (cGAN) deep learning and transfer learning was developed to establish inverse structure–property relationships and design tailor-made hybrid composites. Based on FEA-generated datasets of hybrid fiber-particle–matrix microstructures and their corresponding full-range stress–strain curves, a cGAN architecture was trained to generate tailored microstructures and establish structure–property relationships. Similarity in microstructural features and well-matched stress–strain curves based on the AI-generated composites were achieved. In conclusion, transfer learning was used to expand the pre-trained model for designing different materials systems.

Hybrid composites↗
DOE OSTI2020

Self-Repairing Polymer-Modified Cements for High Temperature Geothermal and Fossil Energy Applications

In this work five novel polymer-cement composite formulations were prepared and evaluated as potential cementitious material alternatives to conventional wellbore cement. These cement composites were cured at 200 °C and their mechanical properties, including compressive strength, Young modulus, shear bond strength to steel casing, and self-healing and re-adhering (to steel) capability. Thermal stability was also evaluated by curing these cement materials at 200 °C for up to one month followed by determining their mineralogy and chemical composition by X-ray diffraction spectroscopy, 13C NMR, and total organic carbon. Permeability analysis was performed before and after healing a longitudinal fracture on unmodified cements and polymer-cement composites with the later showing lower (2nd/1st) permeability ratios with respect to base cements. Furthermore, a reduction in permeability of up to 80X on average with respect to their unmodified (base) cement, was observed in two polymer-cement formulations suggesting that the introduction of these polymers bring about self-healing capability. Two of the best performing polymer-cement composites were exposed to 30-day curing period at 200 °C showing that their self-healing capability is maintained. The composite stability is associated to the fact that the polymer material is stable as demonstrated by total organic carbon and NMR spectroscopy. These advanced polymer-cement composites with higher ductility and self-healing capability could be used as alternative wellbore cement materials for geothermal and fossil energy applications.

Rod, Kenton A.↗
DOE OSTI2025

Investigating the mechanism of copper–carbon interactions in ultraconductor materials via in situ thermal X-ray and Raman spectroscopy

Improving energy transfer efficiency is critical to advancing technologies for a more sustainable future. Nanoscale materials, specifically metal–carbon composites such as ultraconductors, have shown promise in this field due to their enhanced electrical and thermal conductivities. However, the origin of the enhancement has yet to be determined. Prior research has primarily explored these materials at room temperature in an attempt to explain this phenomenon, but these materials have not yet been examined under enhanced thermal conditions. This study probes ultraconductor materials during the heating process to uncover the origins of their enhanced thermal conductivity. Understanding the mechanism underpinning the enhanced properties of the material could lead to increased property enhancement and therefore improved performance in energy transfer technologies. In this work we employ in situ thermal X-ray absorption near edge spectroscopy (XANES) and Raman spectroscopy to characterize copper-based covetic materials, revealing how thermal conditions influence the bonding environment and interaction between the copper and infused carbon. Our findings suggest that heating the materials does not result in the formation of chemical bonds between the carbon and copper framework of the material but rather points to a primarily physical interaction within the sample. Furthermore, we hypothesize possible mechanisms underlying the nature of the physical interaction leading to enhanced properties. These insights contribute to a deeper understanding of the material's behavior under relevant thermal conditions and highlight its potential for integration into next-generation energy systems.

36 MATERIALS SCIENCE↗