Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

A comparison of turbulence intensity measurements using a laser velocimeter and a hot wire in a low speed jet flow

The study involves a simultaneous measurement with both instruments along radial scans at two axial locations in the jet exiting from the turbulent pipe and an axial scan at the 75-percent radial location in the jet from the convergent nozzle. The results suggest that, within the limits of flow stationarity, both instruments yield measurements in good agreement, + or - 0.8-percent in turbulence intensity, below a turbulence intensity (the ensemble standard deviation divided by the local mean velocity) of 20 percent. From turbulence intensities of 20 percent to a maximum of 75 percent, the measurements exhibit the same trends; for reasons discussed here, however, the comparisons are not of the quality as those below 20 percent. It is found that correcting the turbulence intensity data for velocity bias errors increases the results by an average of 2 percent in turbulence intensity above the hot wire results and the uncorrected laser velocimeter data. The results are seen as calling into question the validity of using the velocity bias correction and time average techniques for turbulence intensity measurements.

Meyers, J. F.↗

Comparison of the information content of data from the Landsat-4 Thematic Mapper and the Multispectral Scanner

There has been a steady increase with respect to the available capability to monitor the earth's surface from satellite platforms. Developments regarding instrumentation should now be considered in the context of the possible commercialization of space systems. The satellite data user is to select his data with many variables in mind, including cost. The present investigation provides a statistical comparison of simultaneously acquired data from the Landsat-4 Thematic Mapper (TM) and the Multispectral Scanner (MSS) for five scenes acquired over agricultural areas. Simple examination of photographic products and manipulation and display of image data suggests that the utility of the TM data will be far greater than that of the MSS. However, factors of cost and frequency of observations can also be important. The approach employed in the investigation should facilitate evaluation of future remote sensing systems.

Price, J. C.↗

A comparison between GO/aperture-field and physical-optics methods for offset reflectors

Both geometrical optics (GO)/aperture-field and physical-optics (PO) methods are used extensively in the diffraction analysis of offset parabolic and dual reflectors. An analytical/numerical comparative study is performed to demonstrate the limitations of the GO/aperture-field method for accurately predicting the sidelobe and null positions and levels. In particular, it is shown that for offset parabolic reflectors and for feeds located at the focal point, the predicted far-field patterns (amplitude) by the GO/aperture-field method will always be symmetric even in the offset plane. This, of course, is inaccurate for the general case and it is shown that the physical-optics method can result in asymmetric patterns for cases in which the feed is located at the focal point. Representative numerical data are presented and a comparison is made with available measured data.

Rahmat-Samii, Y.↗

Comparison of visualized turbine endwall secondary flows and measured heat transfer patterns

Various flow visualization techniques were used to define the seondary flows near the endwall in a large heat transfer data. A comparison of the visualized flow patterns and the measured Stanton number distribution was made for cases where the inlet Reynolds number and exit Mach number were matched. Flows were visualized by using neutrally buoyant helium-filled soap bubbles, by using smoke from oil soaked cigars, and by a few techniques using permanent marker pen ink dots and synthetic wintergreen oil. Details of the horseshoe vortex and secondary flows can be directly compared with heat transfer distribution. Near the cascade entrance there is an obvious correlation between the two sets of data, but well into the passage the effect of secondary flow is not as obvious. Previously announced in STAR as N83-14435

Gaugler, R. E.↗

Comparison of ground-based and Viking Orbiter measurements of Martian water vapor - Variability of the seasonal cycle

Earth-based observations of Mars atmospheric water vapor are presented for the 1975-1976, 1977-1978, and 1983 apparitions. Comparisons are made with near-simultaneous spacecraft measurements made from the Viking Orbiter Mars Atmospheric Water Detection experiment during 1976-1978 and with previous earth-based measurements. Differences occur between the behavior in the different years, and may be related to the Mars climate. Measurements during the southern summer in 1969 indicate a factor of three times as much water as is present at this same season in other years. This difference may have resulted from the sublimation of water from the south polar residual cap upon removal of most or all of the CO2 ice present; sublimation of all of the CO2 ice during some years could be a result of a greater thermal load being placed on the cap due to the presence of differing amounts of atmospheric dust.

Jakosky, B. M.↗

Comparisons of a standard galaxy model with stellar observations in five fields

Modern data on the distribution of stellar colors and on the number of stars as a function of apparent magnitude in five directions in the Galaxy are analyzed. It is found that the standard model is consistent with all the available data. Detailed comparisons with the data for five separate fields are presented. The bright end of the spheroid luminosity function and the blue tip of the spheroid horizontal branch are analyzed. The allowed range of the disk scale heights and of fluctuations in the volume density is determined, and a lower limit is set on the disk scale length. Calculations based on the thick disk model of Gilmore and Reid (1983) are presented.

Bahcall, J. N.↗

Comparison between measured turbine stage performance and the predicted performance using quasi-3D flow and boundary layer analyses

A method for calculating turbine stage performance is described. The usefulness of the method is demonstrated by comparing measured and predicted efficiencies for nine different stages. Comparisons are made over a range of turbine pressure ratios and rotor speeds. A quasi-3D flow analysis is used to account for complex passage geometries. Boundary layer analyses are done to account for losses due to friction. Empirical loss models are used to account for incidence, secondary flow, disc windage, and clearance losses. Previously announced in STAR as N84-22564

Boyle, R. J.↗

Cost considerations in database selection - A comparison of DIALOG and ESA/IRS

It is pointed out that there are many factors which affect the decision-making process in determining which databases should be selected for conducting the online search on a given topic. In many cases, however, the major consideration will be related to cost. The present investigation is concerned with a comparison of the costs involved in making use of DIALOG and the European Space Agency's Information Retrieval Service (ESA/IRS). The two services are very comparable in many respects. Attention is given to pricing structure, telecommunications, the number of databases, prints, time requirements, a table listing online costs for DIALOG and ESA/IRS, and differences in mounting databases. It is found that ESA/IRS is competitively priced when compared to DIALOG, and, despite occasionally higher telecommunications costs, may be even more economical to use in some cases.

Jack, R. F.↗

A comparison of IMPATT oscillator power and frequency above 100 GHz with results derived from theoretical models

This investigation is concerned with a comparison of measured 117-GHz IMPATT oscillator frequency and output power with results derived from theoretical circuit models. It is pointed out that previous millimeter-wave oscillator models are unsuitable for studying circuit behavior, such as oscillator tuning as a function of waveguide short position or other circuit parameters. In the current study, oscillator circuit modeling techniques, successfully applied at X-band, are applied for the first time to a millimeter-wave IMPATT oscillator circuit. Attention is given to an oscillator circuit description, an IMPATT diode circuit model, a circuit model, and an oscillator analysis.

Bates, B. D.↗

Comparison of numerical techniques for integration of stiff ordinary differential equations arising in combustion chemistry

The efficiency and accuracy of several algorithms recently developed for the efficient numerical integration of stiff ordinary differential equations are compared. The methods examined include two general-purpose codes, EPISODE and LSODE, and three codes (CHEMEQ, CREK1D, and GCKP84) developed specifically to integrate chemical kinetic rate equations. The codes are applied to two test problems drawn from combustion kinetics. The comparisons show that LSODE is the fastest code currently available for the integration of combustion kinetic rate equations. An important finding is that an interactive solution of the algebraic energy conservation equation to compute the temperature does not result in significant errors. In addition, this method is more efficient than evaluating the temperature by integrating its time derivative. Significant reductions in computational work are realized by updating the rate constants (k = at(supra N) N exp(-E/RT) only when the temperature change exceeds an amount delta T that is problem dependent. An approximate expression for the automatic evaluation of delta T is derived and is shown to result in increased efficiency.

Radhakrishnan, K.↗

Mars-Earth geographical comparisons: A pictorial view

A collection of pictorial comparisons of prominent physiographic features found on Mars and Earth, consisting of equal-scale side-by-side pairs or cartographic overlays is presented. Martian features compared with terrestrial ones include Vales Marineris, the Tharsis bulge, Olympus Mons, the Hellas and Argyre basins, areas of catastrophic flooding, and the polar regions. The illustrations are accompanied by a brief descriptive text and bibliography.

Meszaros, S. P.↗

A comparison of Wortmann airfoil computer-generated lift and drag polars with flight and wind tunnel results

Computations of drag polars for a low-speed Wortmann sailplane airfoil are compared with both wind tunnel and flight test results. Excellent correlation was shown to exist between computations and flight results except when separated flow regimes were encountered. Smoothness of the input coordinates to the PROFILE computer program was found to be essential to obtain accurate comparisons of drag polars or transition location to either the flight or wind tunnel flight results.

Bowers, A. H.↗

A comparison between active and passive sensing of soil moisture from vegetated terrains

A comparison between active and passive sensing of soil moisture over vegetated areas is studied via scattering models. In active sensing three contributing terms to radar backscattering can be identified: (1) the ground surface scatter term; (2) the volume scatter term representing scattering from the vegetation layer; and (3) the surface volume scatter term accounting for scattering from both surface and volume. In emission three sources of contribution can also be identified: (1) surface emission; (2) upward volume emission from the vegetation layer; and (3) downward volume emission scattered upward by the ground surface. As ground moisture increases, terms (1) and (3) increase due to increase in permittivity in the active case. However, in passive sensing, term (1) decreases but term (3) increases for the same reason. This self conpensating effect produces a loss in sensitivity to change in ground moisture. Furthermore, emission from vegetation may be larger than that from the ground. Hence, the presence of vegetation layer causes a much greater loss of sensitivity to passive than active sensing of soil moisture.

Fung, A. K.↗

Workshop on Comparison of Data and Derived Dynamical Quantities During Northern Hemisphere (PMP-1) Winters

Atmospheric temperature and geopotential height were compared along with the quantities derived from them for application to stratospheric dynamics. The data for comparison were those gathered from radiosondes and rockets. Data from the Northern Hemisphere winters 1978/79 through 1981/82 were discussed, but most attention was devoted to days during the winter of 1978/79.

Gille, J. C.↗

A comparison of metropolitan and non-metropolitan employment characteristics: Indications of the size of non-metropolitan mobile communication services user classes

The similarities and differences between areas inside and outside U.S. metropolitan areas were evaluated in terms of their commercial/industrial and government employment characteristics. The comparison focuses on the levels, shares, and composition of employment in the commercial/industrial and government sectors that represent potential classes of land mobile communications users. The major findings of the analysis are as follows: (1) non-metropolitan commercial/industrial user classes of land mobile communication services exist in significant numbers; (2) the compositions of non-metropolitan and metropolitan commercial/industrial user classes of land mobile communication services closely resemble each other; (3) non-metropolitan areas have significant levels of the government user classes that represent potential markets for land mobile communication services; and (4) non-metropolitan local governments have a significantly larger proportion of their employment in the primary user classes of private land mobile radio service than do metropolitan local governments.

Wilcox, R. E.↗

Statistical comparison of pooled nitrogen washout data of various altitude decompression response groups

This analysis was done to determine whether various decompression response groups could be characterized by the pooled nitrogen (N2) washout profiles of the group members, pooling individual washout profiles provided a smooth time dependent function of means representative of the decompression response group. No statistically significant differences were detected. The statistical comparisons of the profiles were performed by means of univariate weighted t-test at each 5 minute profile point, and with levels of significance of 5 and 10 percent. The estimated powers of the tests (i.e., probabilities) to detect the observed differences in the pooled profiles were of the order of 8 to 30 percent.

Edwards, B. F.↗

Comparison of wind velocity in thunderstorms determined from measurements by a ground-based Doppler radar and an F-106B airplane

As a part of the NASA Storm Hazards Program, the wind velocity in several thunderstorms was measured by an F-106B instrumented airplane and a ground-based Doppler radar. The results of five airplane penetrations of two storms in 1980 and six penetrations of one storm in 1981 are given. Comparisons were made between the radial wind velocity components measured by the radar and the airplane. The correlation coefficients for the 1980 data and part of the 1981 data were 0.88 and 0.78, respectively. It is suggested that larger values for these coefficients may be obtained by improving the experimental technique and in particular by slaving the radar to track the airplane during such tests.

Usry, J. W.↗

A Comparison of Three Curve Intersection Algorithms

An empirical comparison is made between three algorithms for computing the points of intersection of two planar Bezier curves. The algorithms compared are: the well known Bezier subdivision algorithm, which is discussed in Lane 80; a subdivision algorithm based on interval analysis due to Koparkar and Mudur; and an algorithm due to Sederberg, Anderson and Goldman which reduces the problem to one of finding the roots of a univariate polynomial. The details of these three algorithms are presented in their respective references.

Sederberg, T. W.↗