Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Base”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Investigating deformation and mesoscale void creation in HMX based composites using tomography based grain scale FEM

The microstructure of plastic bonded explosives (PBXs) significantly affects their macroscale mechanical characteristics. Imaging and modeling of the mesoscale constituents allows for a detailed examination of the deformation of mechanically loaded PBXs. In this study, a pair of explosive HMX crystals were bound with an HTPB based polymer binder and imaged using micro Computed Tomography ($µ$CT). Delamination of the polymer binder from the crystals was induced via macro-scale application of a tensile load. Cohesive parameters for simulation of the crystal/binder interface were determined by comparing numerical and experimental results of the delamination of this bi-crystal system. Simulations showed macro-scale plastic behavior is accommodated through both crystal-binder delamination and plastic deformation of the binder itself. Imaging and simulation of this bi-crystal system demonstrated the complex interplay of material constitutive behavior and grain-scale geometry. Successful parameterization of this relatively simple mechanical system is a step toward a better understanding void nucleation in similarly composed polycrystalline composites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure-based model of nonlinear ultrasonic response in materials with distributed defects

Nonlinear ultrasonic technique is one of promising NDE methods for monitoring defect evolution in irradiated nuclear materials. In this work, we have studied the effect of distributed defects on nonlinear ultrasonic response, in particular, the nonlinear parameter ß from the 2nd harmonic wave. A three-dimensional microstructure-based model has been developed for investigating the dynamic interaction between distributed defects and a propagating longitudinal sound wave. Both linear and nonlinear materials are considered. It is known that the 2nd harmonic wave is generated when a monochromatic wave propagates in a nonlinear elastic material. The results show that second phase particles with elastic heterogeneity and lattice mismatch have strong impact on the nonlinear parameter ß. Lattice mismatches have more effect on the nonlinear parameter no matter they are expansion or contraction. The developed model enables one to explore the contributions of different types of defects to the nonlinear ultrasonic signals and shed light on the development of nonlinear ultrasound nondestructive detection of material defects in nuclear reactors.

Second harmonic generation, Scattered distributed ↗

Neutron generator based on intense lithium beam driver

We are proposing a compact neutron generator based on a Li beam driver. The proposed neutron generator comprises a laser ion source, a radio-frequency quadrupole linear accelerator (RFQ linac), a drift tube linac, and a target containing protons. In the generator, the lithium ion is used as a projectile instead of protons to utilize the kinematic focusing technique. The technique enables us to enhance the neutron flux without increasing the beam energy, which is important to develop a clean compact neutron generator. Moreover, the combination of a laser ion source and a RFQ linac with the direct plasma injection scheme will provide several tens of mA of a fully ionized lithium beam, which is much higher than that of conventional heavy ion sources comparable with proton drivers. Neutrons are generated by the nuclear reaction of the lithium ions and protons in the beam target. In this paper, we reported the current status of the development. For RFQ, we designed the RFQ rods to accelerate 40 mA of 7Li3+. We fabricated and installed the rods into a cavity, and, as a first test, accelerated 10 mA of C6+ successfully.

Ikeda, Shunsuke (ORCID:0000000339800577)↗

Photoactivation mechanism of PAmCherry based on crystal structures of the protein in the dark and fluorescent states

Photoactivatable fluorescent proteins (PAFPs) are required for super-resolution imaging of live cells. Recently, the first red PAFP, PAmCherry1, was reported, which complements the photo-activatable GFP by providing a red super-resolution color. PAmCherry1 is originally 'dark' but exhibits red fluorescence after UV-violet light irradiation. To define the structural basis of PAmCherry1 photoactivation, we determined its crystal structure in the dark and red fluorescent states at 1.50 {angstrom} and 1.65 {angstrom}, respectively. The non-coplanar structure of the chromophore in the dark PAmChery1 suggests the presence of an N-acylimine functionality and a single non-oxidized C{alpha}-C{beta} bond in the Tyr-67 side chain in the cyclized Met-66-Tyr-67-Gly-68 tripeptide. MS data of the chromophore-bearing peptide indicates the loss of 20 Da upon maturation, whereas tandem MS reveals the C{alpha}-N bond in Met-66 is oxidized. These data indicate that PAmCherry1 in the dark state possesses the chromophore N-[(E)-(5-hydroxy-1H-imidazol-2-yl)methylidene]acetamide, which, to our knowledge, has not been previously observed in PAFPs. The photoactivated PAmCherry1 exhibits a non-coplanar anionic DsRed-like chromophore but in the trans configuration. Based on the crystallographic analysis, MS data, and biochemical analysis of the PAmCherry1 mutants, we propose the detailed photoactivation mechanism. In this mechanism, the excited-state PAmCherry1 chromophore acts as the oxidant to release CO{sub 2} molecule from Glu-215 via a Koble-like radical reaction. The Glu-215 decarboxylation directs the carbanion formation resulting in the oxidation of the Tyr-67 C{alpha}-C{beta} bond. The double bond extends the {pi}-conjugation between the phenolic ring of Tyr-67, the imidazolone, and the N-acylimine, resulting in the red fluorescent chromophore.

36 MATERIALS SCIENCE↗

Adjoint-Based Sensitivity and Uncertainty Analysis for Density and Composition: A User’s Guide

The ability to perform sensitivity analyses using adjoint-based first-order sensitivity theory has existed for decades. This paper provides guidance on how adjoint sensitivity methods can be used to predict the effect of material density and composition uncertainties in critical experiments, including when these uncertain parameters are correlated or constrained. Two widely used Monte Carlo codes, MCNP6 (Ref. 2) and SCALE 6.2 (Ref. 3), are both capable of computing isotopic density sensitivities in continuous energy and angle. Additionally, Perkó et al. have shown how individual isotope density sensitivities, easily computed using adjoint methods, can be combined to compute constrained first-order sensitivities that may be used in the uncertainty analysis. This paper provides details on how the codes are used to compute first-order sensitivities and how the sensitivities are used in an uncertainty analysis. Constrained first-order sensitivities are computed in a simple example problem.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Parallel EM Algorithm for Model-Based Clustering Applied to the Exploration of Large Spatio-Temporal Data

We develop a parallel EM algorithm for multivariate Gaussian mixture models and use it to perform model-based clustering of a large climate data set. Three variants of the EM algorithm are reformulated in parallel and a new variant that is faster is presented. All are implemented using the single program, multiple data (SPMD) programming model, which is able to take advantage of the combined collective memory of large distributed computer architectures to process larger data sets. Displays of the estimated mixture model rather than the data allow us to explore multivariate relationships in a way that scales to arbitrary size data. We study the performance of our methodology on simulated data and apply our methodology to a high resolution climate dataset produced by the community atmosphere model (CAM5). This article has supplementary material online.

Chen, Wei-Chen↗

Temperature Dependent Elastic moduli of Lead-Telluride based Thermoelectric Materials

In the open literature, reports of mechanical properties are limited for semiconducting thermoelectric materials, including the temperature dependence of the elastic moduli. In this study, for both cast ingots and hot pressed billets of Ag-, Sb-, Sn-, and S- doped PbTe thermoelectric materials, Resonant Ultrasound Spectroscopy (RUS) was utilized to determine the temperature dependence of elastic moduli including Young's modulus, shear modulus, and Poisson's ratio. This study is the first to determine the temperature-dependent elastic moduli for these PbTe based thermoelectrics and among the few determinations of elasticity of any thermoelectric material for temperatures above 300 K. The Young s modulus and Poisson s ratio measured from room temperature to 773 K during heating and cooling agreed well. Also, the observed Young s modulus, E, versus temperature, T, relationship E(T) = E0(1 bT) is consistent with predictions for materials in the range well above the Debye temperature. A nanoindentation study of Young s modulus on the specimen faces showed that both the cast and hot pressed specimens were approximately elastically isotropic.

36 MATERIALS SCIENCE↗

Gain comparison in polar and nonpolar/ semipolar gallium-nitride-based laser diodes

Experimental gain spectra at continuous-wave (CW) operation of laser diodes (LDs) fabricated from c-plane, nonpolar and semipolar GaN-based materials emitting in violet, blue and green spectral regions are presented. Gain spectra were obtained using the Hakki–Paoli method at high resolution. The ability of the setup to resolve the sharp Fabry–Perot longitudinal peaks of the lasers at all injection currents allowed us to accurately measure the current density to reach transparency on the devices characterized in this work, and determine both total losses and differential modal gain curves up to threshold. We present a comparison of transparency current density and modal gain for nonpolar and c-plane LDs in violet and blue regions. The main parameters for the analysis are the internal electric fields (for c-plane lasers), hole effective masses and valence band splittings. In a preliminary analysis, we investigated the gain spectrum of semipolar green LDs and observed a significantly lower total linewidth (homogeneous plus inhomogeneous) than reported elsewhere, which seems to indicate that inhomogeneous broadening is not the main issue governing the evolution toward high performance green LDs.

36 MATERIALS SCIENCE↗

Science with the space-based interferometer LISA. IV: probing inflation with gravitational waves

We investigate the potential for the LISA space-based interferometer to detect the stochastic gravitational wave background produced from different mechanisms during inflation. Focusing on well-motivated scenarios, we study the resulting contributions from particle production during inflation, inflationary spectator fields with varying speed of sound, effective field theories of inflation with specific patterns of symmetry breaking and models leading to the formation of primordial black holes. The projected sensitivities of LISA are used in a model-independent way for various detector designs and configurations. We demonstrate that LISA is able to probe these well-motivated inflationary scenarios beyond the irreducible vacuum tensor modes expected from any inflationary background.

79 ASTRONOMY AND ASTROPHYSICS↗

A reduced model for the ITER divertor based on SOLPS solutions for ITER Q = 10 baseline conditions: B. A reduced model based on reversed-direction two point modeling

Edge codes such as SOLPS coupled to neutral codes such as EIRENE have become so comprehensive and sophisticated that they now constitute, in effect, 'code-experiments' that, as for actual experiments, can benefit from interpretation using simple models and conceptual frameworks, i.e. reduced models. The first task is the identification of options for the reduced model control parameters that are best suited for control of the action of the divertor, i.e. for control of target power loading and sputter–erosion, primarily. A strong correlation between the electron temperature at the divertor target, T e,t , and the neutral deuterium D 2 density at the target, n D2,t , flux-tube resolved, has recently been reported for a number of code studies including SOLPS-4.3 modeling of a set of ~50 ITER baseline cases: Q DT = 10, q 95 = 3, P SOL = 100 MW, metallic walls, and Ne seeding (Pitts et al 2019). Part A of the present study reports new results for largely the same ITER cases, confirming the strong correlation reported earlier between local values of T e,t , and (i) n D2,t , and (ii) normalized volumetric losses of power and pressure in the divertor. Strong correlations have now also been found, and are reported here for the first time, between T e,t and all of the divertor target quantities of practical interest. A physical explanation for this surprising result has not as yet been fully identified; nevertheless it has encouraging implications for reduced modeling of the ITER divertor. For such ITER conditions, (i) the global Ne injection rate, Inj Ne (Ne s –1 ), and (ii) the electron temperature at the location on the target where the peak power deposition occurs, T e,t @q ⊥,pk (eV), are found to be promising reduced model control parameters. In this part B, a reduced model for the ITER divertor is developed and described in detail, based on reversed-direction two point modeling, Rev2PM. The input to the reduced model is a value of the variable pair (T e,t @q ⊥,pk , Inj Ne )for a chosen case and the output are values of the various target as well as divertor-entrance quantities of practical interest, e.g. q ⊥,pk , the electron density at the X-point, n e,Xpt , etc. The reduced model was quantitatively characterized using one half of the code cases; it was then used to successfully predict (replicate) the code values of e.g. n e,Xpt for the other half.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A digital twin based on OpenFAST linearizations for real-time load and fatigue estimation of land-based turbines

Monitoring a wind turbine requires intensive instrumentation, which would be too cost-prohibitive to deploy to an entire wind plant. This work presents a technique that uses readily available measurements to estimate signals that would otherwise require additional instrumentation. This study presents a digital twin concept with a focus on estimating wind speed, thrust, torque, tower-top position, and loads in the tower using supervisory control and data acquisition (SCADA) measurements. The model combines a linear state-space model obtained using OpenFAST linearizations, a wind speed estimator, and a Kalman filter algorithm that integrates measurements with the state model to perform state estimations. The measurements are: top acceleration, generator torque, pitch, and rotational speed. The article extends previous work that derived the linear state-space model using a different method. The new implementation, based on OpenFAST linearization capability, allows for a systematic extension of the method to more states, inputs, outputs, and to the offshore environment. Results from the two methods are compared, and the validation is made with additional measurements using the GE 1.5-MW turbine located at the National Renewable Energy Laboratory test site. Real-time damage equivalent loads of the tower bottom moment are estimated with an average accuracy of approximately 10%. Overall, the results from this proof of concept are encouraging, and further application of the model will be considered.

17 WIND ENERGY↗

Using controlled disorder to distinguish $s$ ± and $s$ +⁢+ gap structure in Fe-based superconductors

We reconsider the effect of disorder on the properties of a superconductor characterized by a sign-changing order parameter appropriate for Fe-based materials. Within a simple two-band model, we calculate simultaneously T c , the change in residual resistivity Δ⁢ρ 0 , and the zero-energy density of states, and show how these results change for various types of gap structure and assumptions regarding the impurity scattering. The rate of T c suppression is shown to vary dramatically according to details of the impurity model considered. We search therefore for a practical, experimentally oriented signature of a gap of the s ± type, and propose that observation of a particular evolution of the penetration depth, nuclear magnetic resonance relaxation rate, or thermal conductivity temperature dependence with disorder would suffice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗