Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BASE PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

Model-Based Characterization of Elevated Temperature and High Pressure Oxy-Coal Combustion Systems

Reaction Engineering International is leading a DOE-funded program focused on characterization of the impacts of high temperatures and pressures in oxy-coal combustion systems. A primary objective is to evaluate flame behavior, heat transfer, and ash chemistry at high pressure to facilitate the application of pressurized oxy-coal in full-scale systems. The University of Utah’s 300 kW pressurized entrained flow gasifier has been successfully modified and operated as a high pressure, slurry-fed, oxy-coal combustor at firing rates ranging from nearly 100 kW to over 180 kW with reactor pressures as high as 200 psi. This presentation will describe the modifications to the gasifier to allow it to operate as a high pressure, oxy-coal combustor; detail experimental data including measurements of radiant flux, wall surface temperatures, and ash aerosol characterization; and CFD modeling of the experimental conditions. In addition, an update will be provided for accomplishments achieved to date for the component of the program focused on modeling of high temperature oxy-coal combustion using undiluted directed oxygen with minimal flue gas recirculation at atmospheric pressure.

CFD modeling↗

Utilization of satellite and surface observations in a gravity wave study

The possibility of detecting gravity waves in the upper troposphere by means of satellite imagery is examined. Attention is focused on the gravity wave event of March 27, 1975, for which the surface wave is analyzed by a pressure perturbation analysis based on barograph traces and a surface wind divergence analysis. IR observations were also made of the event with instrumentation on board the synchronous meteorological satellite (SMS-1). Strong wind gusts were reported at surface stations immediately following severe drops in the surface pressures, events which were found not to be connected with convective activity. The wave was concluded to extend throughout the troposphere with an axis tilted with height, indicating the wave was generated from an upper level energy source. It is suggested that the gravity wave was an adjustment to ageostrophic motions within the jet stream entering the Midwest. The finding is in concert with previous observations of jet streaks upstream from surface gravity waves.

Pecnick, M. J.↗

Transpiring purging access probe for particulate laden or hazardous environments

An access probe for remote-sensing access through a viewing port, viewing volume, and access port into a vessel. The physical boundary around the viewing volume is partially formed by a porous sleeve lying between the viewing volume and a fluid conduit. In a first mode of operation, a fluid supplied to the fluid conduit encounters the porous sleeve and flows through the porous material to maintain the viewing volume free of ash or other matter. When additional fluid force is needed to clear the viewing volume, the pressure of the fluid flow is increased sufficiently to slidably translate the porous sleeve, greatly increasing the flow into the viewing volume. The porous sleeve is returned to position by an actuating spring. The access probe thereby provides for alternate modes of operation based on the pressure of an actuating fluid.

47 OTHER INSTRUMENTATION↗

Support of gas flowmeter upgrade

A project history review, literature review, and vendor search were conducted to identify a flowmeter that would improve the accuracy of gaseous flow measurements in the White Sands Test Facility (WSTF) Calibration Laboratory and the Hydrogen High Flow Facility. Both facilities currently use sonic flow nozzles to measure flowrates. The flow nozzle pressure drops combined with corresponding pressure and temperature measurements have been estimated to produce uncertainties in flowrate measurements of 2 to 5 percent. This study investigated the state of flowmeter technology to make recommendations that would reduce those uncertainties. Most flowmeters measure velocity and volume, therefore mass flow measurement must be calculated based on additional pressures and temperature measurement which contribute to the error. The two exceptions are thermal dispersion meters and Coriolis mass flowmeters. The thermal dispersion meters are accurate to 1 to 5 percent. The Coriolis meters are significantly more accurate, at least for liquids. For gases, there is evidence they may be accurate to within 0.5 percent or better of the flowrate, but there may be limitations due to inappropriate velocity, pressure, Mach number and vibration disturbances. In this report, a comparison of flowmeters is presented. Candidate Coriolis meters and a methodology to qualify the meter with tests both at WSTF and Southwest Research Institute are recommended and outlined.

Waugaman, Dennis↗

Flight Test Results of a GPS-Based Pitot-Static Calibration Method Using Output-Error Optimization for a Light Twin-Engine Airplane

As part of the NASA Aviation Safety Program (AvSP), a novel pitot-static calibration method was developed to allow rapid in-flight calibration for subscale aircraft while flying within confined test areas. This approach uses Global Positioning System (GPS) technology coupled with modern system identification methods that rapidly computes optimal pressure error models over a range of airspeed with defined confidence bounds. This method has been demonstrated in subscale flight tests and has shown small 2- error bounds with significant reduction in test time compared to other methods. The current research was motivated by the desire to further evaluate and develop this method for full-scale aircraft. A goal of this research was to develop an accurate calibration method that enables reductions in test equipment and flight time, thus reducing costs. The approach involved analysis of data acquisition requirements, development of efficient flight patterns, and analysis of pressure error models based on system identification methods. Flight tests were conducted at The University of Tennessee Space Institute (UTSI) utilizing an instrumented Piper Navajo research aircraft. In addition, the UTSI engineering flight simulator was used to investigate test maneuver requirements and handling qualities issues associated with this technique. This paper provides a summary of piloted simulation and flight test results that illustrates the performance and capabilities of the NASA calibration method. Discussion of maneuver requirements and data analysis methods is included as well as recommendations for piloting technique.

Martos, Borja↗

Differential absorption lidar measurements of atmospheric temperature and pressure profiles

The theory and methodology of using differential absorption lidar techniques for the remote measurement of atmospheric pressure profiles, surface pressure, and temperature profiles from ground, air, and space-based platforms are presented. Pressure measurements are effected by means of high resolution measurement of absorption at the edges of the oxygen A band lines where absorption is pressure dependent due to collisional line broadening. Temperature is assessed using measurements of the absorption at the center of the oxygen A band line originating from a quantum state with high ground state energy. The population of the state is temperature dependent, allowing determination of the temperature through the Boltzmann term. The results of simulations of the techniques using Voigt profile and variational analysis are reported for ground-based, airborne, and Shuttle-based systems. Accuracies in the 0.5-1.0 K and 0.1-0.3% range are projected.

Korb, C. L.↗

A machine learning model for predicting the minimum miscibility pressure of CO 2 and crude oil system based on a support vector machine algorithm approach

CO 2 enhanced oil recovery (EOR) is a potential way for carbon capture, utilization and storage (CCUS). Though, the effect of CO 2 injection is greatly influenced by the reservoir conditions. Typically, Minimum miscible pressure (MMP) is selected as one of the key parameters for the screening and evaluation of prospective CO 2 flooding. Conventional slim tube test is both accurate and widely accepted but it is inefficient. Existing empirical formulas for MMPs are easy to be used but have been proved inaccurate and unreliable. Machine learning-based methods have great advantages in predicting MMP. However, only predication accuracy is discussed for most models without the screening of the main control factors and further validation of the model reliability. In this paper, a new prediction model based on support vector machine (SVM) was developed for pure/impure CO 2 and crude oil system. This study was based on 147 sets of MMP data from the literature with full information on reservoir temperature, oil composition and gas composition. The main control factors were screened by several statistical methods. Unlike the conventional prediction models that verified by only prediction accuracy, learning curve and single factor control variable analysis are further validated to obtain the optimum model.

02 PETROLEUM↗

Vapor Pressures of RDX and HMX Explosives Measured at and Near Room Temperature: 1,3,5-Trinitro-1,3,5-triazinane and 1,3,5,7-Tetranitro-1,3,5,7-tetrazocane

Knowing accurate saturated vapor pressures of explosives at ambient conditions is imperative to provide realistic boundaries on available vapor for ultra-trace detection. In quantifying vapor content emanating from low-volatility explosives, we observed discrepancies between the quantity of explosive expected based on literature vapor pressure values and the amount detected near ambient temperatures. Most vapor pressure measurements for low-volatility explosives, such as RDX (1,3,5-trinitro-1,3,5-triazinane) and HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazocane), have been made at temperatures far exceeding 25 °C and linear extrapolation of these higher temperature trends appears to underestimate vapor pressures near room temperature. Our goal was to measure vapor pressures as a function of temperature closer to ambient conditions. We used saturated RDX and HMX vapor sources at controlled temperatures to produce vapors that were then collected and analyzed via atmospheric flow tube-mass spectrometry (AFT-MS). The parts-per-quadrillion (ppqv) sensitivity of AFT-MS enabled measurement of RDX vapor pressures at temperatures as low as 7 °C and HMX vapor pressures at temperatures as low as 40 °C for the first time. Furthermore, these vapor pressures were corroborated with analysis of vapor generated by nebulizing low concentration solutions of RDX and HMX. We report updated vapor pressure values for both RDX and HMX. Based on our measurements, the vapor pressure of RDX at 25 °C is 3 ± 1 x 10-11 atm (i.e. 30 parts per trillion by volume, pptv), the vapor pressure of HMX is 1.0 ± 0.6 x 10-14 atm (10 ppqv) at 40 °C and, with extrapolation, HMX has a vapor pressure of 1.0 ± 0.6 x 10-15 atm (1.0 ppqv) at 25 °C.

RDX, HMX, explosives, vapor pressure, vapor detect↗

A vibrational spectroscopic study of kernite to 25 GPa: Implications for the high-pressure stability of borate polyhedra

The Raman and infrared spectra of kernite [Na 2 B 4 O 6 (OH) 2 ·3H 2 O] have been characterized up to ~25 and 23 GPa, respectively, to explore pressure-induced changes in a structurally novel mineral that contains mixed coordination borate groups (threefold and fourfold), as well as both hydroxyl groups and water molecules. BO 3 and BO 4 vibrational modes are characterized in both the Raman and infrared spectra of kernite, and reassignments of some modes are made based on observed pressure shifts. Under compression to ~25 GPa, kernite undergoes three phase transitions: one initiates near ~2.5 GPa, the second occurs at ~7.0 GPa, and the third near 11.0 GPa. The first transition is characterized by a loss of both a subset of the Na-associated modes and a sharp OH peak, and it is fully reversible. The second transition is characterized by the loss of most of the BO 3 modes, some of the BO 4 modes at ~7 GPa, and further broadening of the H 2 O and OH peaks. This transition is partially reversible on decompression, but the Raman spectra indicate that the high-pressure structure and its reversion products are likely disordered. The third transition is characterized by the loss of most of the Raman and infrared modes, and it is not reversible on decompression. The decompression products from ~25 GPa have markedly different infrared and Raman spectra from the starting material, and appear to involve different bonding environments of boron than are present in the starting materials: thus, pressure treatment of boron-rich materials may generate novel quenchable structures. Notably, the BO 3 groups in kernite are destabilized under compression, with the BO 4 groups appearing to be more stable under compression. This shift in coordination may be endemic among borate glasses and crystalline borates under compression. The coordination conversion (and its products on decompression) is likely to highly depend on the detailed topology of the starting materials. Commonalities and differences between the threefold to fourfold transitions in borate systems relative to those in carbonate systems are presented. Lastly our results, combined with prior shock data, indicate that kernite, which may be representative of low-temperature borate minerals, can persist during impact events with peak shock pressures less than ~33 GPa, and the primary polyborate structural units involved in early ribose stabilization would thus survive most impact conditions.

36 MATERIALS SCIENCE↗

A high-pressure X-ray diffraction study of the crystalline phases in calcium aluminate cement paste

Calcium aluminate cement (CAC) has wide application in civil engineering and castable refractory materials. The main binding phases of hardened CAC paste, CaO·Al{sub 2}O{sub 3}·10H{sub 2}O (CAH{sub 10}), inevitably converts to 2CaO·Al{sub 2}O{sub 3}·8H{sub 2}O (C{sub 2}AH{sub 8}), 3CaO·Al{sub 2}O{sub 3}·6H{sub 2}O (C{sub 3}AH{sub 6}) and Al(OH){sub 3} (AH{sub 3}), leading to a significant change in the mechanical properties of the CAC matrix. This work investigates the mechanical properties of the main crystalline components in hydrated and/or converted CAC systems, using synchrotron-radiation-based high-pressure X-ray diffraction. The anisotropic deformations of CaAl{sub 2}O{sub 4} (CA), CAH{sub 10} and C{sub 3}AH{sub 6} along each crystallographic direction are investigated, along with their bulk moduli. The density-driven stiffening hypothesis is validated for the studied phases and other cement-based minerals. An atom-scale topological analysis is proposed to explain the unusually high stiffness of CAH{sub 10}. The results provide fundamental information to understand the mechanical properties of single cement-based phases at molecular level, and enable predicting the changing mechanical properties of converted CAC matrix using homogenization models.

36 MATERIALS SCIENCE↗

Semi-Analytical Leakage Solutions for Aquifers (SALSA) v1

SALSA is a semi-analytical modeling tool that can provide assessments of pressure perturbations and brine leakage because of fluid injection and extraction activities in sedimentary basins. Sedimentary basins typically contain vertical sequences of near-horizontal aquifers separated by less-permeable aquitards. In the context of geologic carbon sequestration (GCS), while aquitards are relied upon to contain injected buoyant free-phase CO2 and limit inter-aquifer brine flow, the large number of leaky wells (e.g., unused/unsuccessful exploration wells, or improperly plugged water or oil/gas wells) that are present in sedimentary basins creates concerns for potential leakage and groundwater contamination. The mathematical theory and solution method included in SALSA is presented in our recent manuscript under review. SALSA is the first to account for the coupled leakage through aquitards and leaky wells, with geologic pressurization sources. SALSA based on semi-analytical solutions can be computationally very efficient for problems containing many injection and leaky wells in multilayered sedimentary systems, compared to any numerical simulation software requiring local mesh refinement around each well to obtain accurate results. Therefore, stakeholders (e.g., regulators, operators) for site screening, injection and post-injection pressure behavior and assessing leakage risks can use SALSA as a fast-predictive tool in GCS applications in multilayered aquifer systems.

Cihan, Abdullah↗

THE ROLE OF THE MAGNETIC FIELD IN THE INTERSTELLAR MEDIUM OF THE POST-STARBURST DWARF IRREGULAR GALAXY NGC 1569

NGC 1569 is a nearby dwarf irregular galaxy which underwent an intense burst of star formation 10-40 Myr ago. We present observations that reach surface brightnesses 2-80 times fainter than previous radio continuum observations and the first radio continuum polarization observations of this galaxy at 20 cm, 13 cm, 6 cm, and 3 cm. These observations allow us to probe the relationship of the magnetic field of NGC 1569 to the rest of its interstellar medium (ISM). We confirm the presence of an extended radio continuum halo at 20 cm and see for the first time the radio continuum feature associated with the western Halpha arm at wavelengths shorter than 20 cm. Although, in general, the spectral indices derived for this galaxy steepen as one moves into the halo of the galaxy, there are filamentary regions of flat spectral indices extending to the edge of the galaxy. The spectral index trends in this galaxy support the theory that there is a convective wind at work in this galaxy. There is strong polarized emission at 3 cm and 6 cm and weak polarized emission at 20 cm and 13 cm. We estimate that the thermal fraction is 40%-50% in the center of the galaxy and falls off rapidly with height above the disk. Using this estimate, we derive a total magnetic field strength of 38 {mu}G in the central regions and 10-15 {mu}G in the halo. The magnetic field is largely random in the center of the galaxy; the uniform field is {approx}3-9 {mu}G and is strongest in the halo. Using our total magnetic field strength estimates and the results of previous observations of NGC 1569, we find that the magnetic pressure is the same order of magnitude but, in general, a factor of a few less than the other components of the ISM in this galaxy. The uniform magnetic field in NGC 1569 is closely associated with the Halpha bubbles and filaments. We suggest that a supernova-driven dynamo may be operating in this galaxy. Based on our pressure estimates and the morphology of the magnetic field, the outflow of hot gas from NGC 1569 is clearly shaping the magnetic field, but the magnetic field in turn may be aiding the outflow by channeling gas out of the disk of the galaxy. Dwarf galaxies with extended radio continuum halos like that of NGC 1569 may play an important role in magnetizing the intergalactic medium.

79 ASTRONOMY AND ASTROPHYSICS↗

Pressure-Induced Phase Transition in a Molecule-Based Magnet with Interpenetrating Sublattices

The molecule-based magnet [Ru2(O2CMe)4]3[Cr(CN)6] contains two interpenetrating sublattices with each sublattice moment confined by anisotropy to a cubic diagonal. At ambient pressure, a field of about 850 Oe rotates the antiferromagnetically-coupled sublattice moments towards the field direction, producing a wasp-waisted magnetization curve. Up to 7 kbar, the sublattice moments increase with pressure due to the enhanced exchange coupling between the Cr and Ru2 spins on each sublattice. Above 7 kbar, the sublattice moment drops by about half and the the linear susceptibility of each sublattice along the cubic diagonal increases dramatically. The most likely explanation for this phase transition is that a high- to low-spin transition on each Ru2 complex reverses and lowers the net spin of each sublattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Near Field Pressure Fluctuations in the Exit Plane of a Choked Axisymmetric Nozzle

Nearfield pressure data are presented for an unheated jet issuing from an underexpanded sonic nozzle for two exit lip thicknesses of 0.200 and 0.625 nozzle diameters. Fluctuating measurements were obtained on the nozzle exit surface as well as in the acoustic nearfield. Narrowband spectra are presented for numerous operating conditions expressed in terms of the fully expanded Mach number based on nozzle pressure ratio.

Ponton, Michael K.↗

Silicon in Mars' Core: A Prediction Based on Mars Model Using Nitrogen and Oxygen Isotopes in SNC Meteorites

Chemical and (oxygen) isotopic compositions of SNC meteorites have been used by a number of workers to infer the nature of precursor materials for the accretion of Mars. The idea that chondritic materials played a key role in the formation of Mars has been the central assumption in these works. Wanke and Dreibus have proposed a mixture of two types of chondritic materials, differing in oxygen fugacity but having CI type bulk chemical composition for the nonvolatile elements, for Mars' precursor. But a number of studies based on high pressure and temperature melting experiments do not favor a CI type bulk planet composition for Mars, as it predicts a bulk planet Fe/Si ratio much higher than that reported from the recent Pathfinder data. Oxygen forms the bulk of Mars (approximately 40% by wt.) and might provide clues to the type of materials that formed Mars. But models based on the oxygen isotopic compositions of SNC meteorites predict three different mixtures of precursor materials for Mars: 90% H + 10% CM, 85% H + 11% CV + 4% CI and 45% EH + 55% H. As each of these models has been shown to be consistent with the bulk geophysical properties (such as mean density, and moment of inertia factor) of Mars, the nature of the material that accreted to form Mars remains ambiguous.

Mohapatra, R. K.↗

Acquisition and Early Losses of Rare Gases from the Deep Earth

Direct observations show that the deep Earth contains rare gases of solar composition distinct from those in the atmosphere. We examine the implications of mantle rare gas characteristics on acquisition of rare gases from the solar nebula and subsequent losses due to a large impact. Deep mantle rare gas concentrations and isotopic compositions can be obtained from a model of transport and distribution of mantle rare gases. This model assumes the lower mantle closed early, while the upper mantle is open to subduction from the atmosphere and mass transfer from the lower mantle. Constraints are derived that can be incorporated into models for terrestrial volatile acquisition: (1) Calculated lower-mantle Xe-isotopic ratios indicate that the fraction of radiogenic Xe produced by I-129 and Pu-244 during the first about 10(exp 8) yr was lost, a conclusion also drawn for atmospheric Xe. Thus, either the Earth was made from materials that had lost >99% of rare gases about (0.7-2) x 10(exp 8) yr after the solar system formed, or gases were then lost from the fully formed Earth. (2) Concentrations of 3He and 20Ne in the lower mantle were established after these losses. (3) Neon-isotopic data indicates that mantle Ne has solar composition. The model allows for solar Ar/Ne and Xe/Ne in the lower mantle if a dominant fraction of upper mantle Ar and Xe are subduction-derived. If Earth formed in the presence of the solar nebula, it could have been melted by accretional energy and the blanketing effect of a massive, nebula-derived atmosphere. Gases from this atmosphere would have been sequestered within the molten Earth by dissolution at the surface and downward mixing. It was found that too much Ne would be dissolved in the Earth unless the atmosphere began to escape when the Earth was only partially assembled. Here we consider conditions required to initially dissolve sufficient rare gases to account for the present lower mantle concentrations after subsequent losses at 10(exp 8) yr. It is assumed that equilibration of the atmosphere with a thoroughly molten mantle was rapid, so that initial abundances of gases retained in any mantle layer reflected surface conditions when the layer solidified. For subsequent gas loss of 99.5% and typical solubility coefficients, a total pressure of 100 atm was required for an atmosphere of solar composition. Calculations of the pressure at the base of a primordial atmosphere indicate that this value might be exceeded by an order of magnitude or more for an atmosphere supported by accretional energy. Surface temperatures of about 4000 K would have been produced, probably high enough to melt the deep mantle. Initial distributions of retained rare gases would then be determined by the history of surface pressure and temperature during mantle cooling and solidification, i.e., the coupled cooling of Earth and atmosphere. The Earth's thermal state was determined by its surface temperature and the efficiency of convection in the molten mantle, estimated to be sufficient to maintain an adiabatic gradient. Because the melting curve is steeper than the adiabat, solidification of the mantle proceeded outward from the interior. Incorporation of atmospheric gases in the mantle therefore occurred over a range in surface temperature of a few thousand degrees Kelvin. The thermal state of the atmosphere was controlled by total luminosity of the Earth (energy) released by accreting planetesimals and the cooling Earth), nebular temperature and pressure, and atmospheric opacity. The energy released by accretion declined with time as did nebular pressure. Analytical solutions for an idealized (constant opacity radiative atmosphere show that declining energy sources under constant nebular conditions result in slowly diminishing surface temperature but dramatically increasing surface pressure. For such an atmosphere with declining nebular pressure but constant total luminosity, surface pressure decreases gradually with decreasing temperaure. A decline in accretion luminosity might be compensated by energy released as the mantle cools for about 10(exp 5) year, after which luminosity must decline. The total complement of dissolved rare gases will depend on the particular evolutionary path determined by the declining accretional luminosity, the Earth thermal history, removal of the nebula, and opacity variations of the atmosphere. Models for these coupled evolutionary histories for Earth's acquisition of nebular-derived noble gases are in progress. The later losses required at about 10(exp 8) yr (depleting the interior concentrations of the sequestered solar gases by a factor of > 100) were presumably related to the major impact in which the Moon formed.

Porcelli, D.↗

Coupled strain-induced alpha to omega phase transformation and plastic flow in zirconium under high pressure torsion in a rotational diamond anvil cell

Strain-induced α → ω phase transformation (PT) in the zirconium (Zr) sample under compression and plastic shear in a rotational diamond anvil cell (RDAC) is investigated using the finite element method (FEM). The fields of the volume fraction of the ω phase, all components of the stress tensor, and plastic strain are presented. Before torsion, PT barely occurs. During torsion under a fixed applied force, PT initiates at the center of the sample, where the pressure first reaches the minimum pressure for strain-induced α → ω PT, p d ε , and propagates from the center to the periphery and from the symmetry plane to the contact surface. Salient increase of the shear friction stress and pressure at the center of a sample, so-called pressure self-multiplication effect observed experimentally for some other materials, is predicted here for Zr. It is caused by much higher yield strength of the phase in comparison with the phase. Except at the very center of a sample, the total contact friction stress is equal to the yield strength in shear of the mixture of phases and the plastic sliding occurs there. Due to the reduction in sample thickness and radial material flow during torsion, the ω phase can be observed in the region where pressure is lower than p d ε , which may lead to misinterpretation of the experimental data for p d ε . For the same applied force, torsion drastically promotes PT in comparison with the compression without torsion. However, the PT process in RDAC is far from optimal: (a) due to the pressure self-multiplication effect, the pressure in the transformed region is much higher than that required for PT; (b) the region in which PT occurs is limited by the pressure p d ε and cannot be expanded by increasing a shear under a fixed force; and (c) the significant reduction in thickness during torsion reduces the total mass of the high-pressure phase. These drawbacks can be overcome by placing a sample within a strong gasket with an optimized geometry. It is shown that, due to strong pressure heterogeneity, characterization of α → ω and α → β PTs based on the averaged pressure contains large errors. Furthermore, the obtained results, in addition to providing an improved understanding of the strain-induced PTs, may be beneficial for the optimum design of experiments and the extraction of material parameters, as well as optimization and control of PTs by varying the geometry and loading conditions.

36 MATERIALS SCIENCE↗