SEARCH · Engineering Papers

Results for “Advanced Computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Extensions to PIFCGT: Multirate output feedback and optimal disturbance suppression

New control synthesis procedures for digital flight control systems were developed. The theoretical developments are the solution to the problem of optimal disturbance suppression in the presence of windshear. Control synthesis is accomplished using a linear quadratic cost function, the command generator tracker for trajectory following and the proportional-integral-filter control structure for practical implementation. Extensions are made to the optimal output feedback algorithm for computing feedback gains so that the multirate and optimal disturbance control designs are computed and compared for the advanced transport operating system (ATOPS). The performance of the designs is demonstrated by closed-loop poles, frequency domain multiinput sigma and eigenvalue plots and detailed nonlinear 6-DOF aircraft simulations in the terminal area in the presence of windshear.

Broussard, J. R.↗

NASA NTRS1986

Acquisition times of carrier tracking sampled data phase-locked loops

Phase acquisition times of type II and III loops typical of the Advanced Receiver are studied by computer simulations when the loops are disturbed by gaussian noise. Reliable estimates are obtained by running 5000 trials for each combination of loop signal-to-noise ratio (SNR) and frequency offset. The probabilities of acquisition are shown versus time from start of acquisition for various loop SNRs and frequency offsets. For frequency offsets smaller than one-fourth of the loop bandwidth and for loop SNRs of 10 dB and higher, the loops acquire with probability 0.99 within 2.5 B sub L for type II loops and within 7/B sub L for type III loops.

Aguirre, S.↗

NASA NTRS1986

Numerical simulation of transonic separated flows over low-aspect ratio wings

Transonic flow fields about a low-aspect-ratio advanced technology wing have been computed using a viscous/inviscid zonal approach. The flow field near the wing where viscous effects are important was solved using the 'Reynolds-Averaged Navier-Stokes Equations' in 'thin-layer' form. The Euler equations were used to determine the flow field in regions away from the wing where viscous effects are insignificant. A zonal grid using an H-H topology was generated around the wing by first solving a set of Poisson's equations for the global grid. This grid was then subdivided into separate zones of viscous or inviscid flow as suggested by the flow physics. A series of flow cases were computed and compared with corresponding sets of experimental data. All cases showed good agreement with experiment in terms of the pressure field. Also, a good correlation between computed separated surface flow and experimental oil flow was obtained.

Kaynak, U.↗

NASA NTRS1986

Effect of design variables, temperature gradients and speed of life and reliability of a rotating disk

A generalized methodology to predict the fatigue life and reliability of a rotating disk such as used for aircraft engine turbines and compressors is advanced. The approach incorporates the computed life of elemental stress volumes to predict system life and reliability. Disk speed and thermal gradients as well as design variables such as disk diameter and thickness and bolt hole size, number and location are considered.

Zaretsky, E. V.↗

NASA NTRS1987

Description of an aeronautical geometry conversion package: Wave-drag to Langley Wireframe Geometry Standard (LaWGS) to Supersonic Implicit Marching Potential (SIMP)

Documented is an aeronautical geometry conversion package which translates wave-drag geometry into the Langley Wireframe Geometry Standard (LaWGS) format and then into a format which is used by the Supersonic Implicit Marching Potential (SIMP) program. The programs described were developed by Computer Sciences Corporation for the Advanced Vehicles Division/Advanced Concepts Branch at NASA Langley Research Center. Included also are the input and output from a benchmark test case.

Wiese, Michael R.↗

NASA NTRS1987

EOS: A project to investigate the design and construction of real-time distributed Embedded Operating Systems

Project EOS is studying the problems of building adaptable real-time embedded operating systems for the scientific missions of NASA. Choices (A Class Hierarchical Open Interface for Custom Embedded Systems) is an operating system designed and built by Project EOS to address the following specific issues: the software architecture for adaptable embedded parallel operating systems, the achievement of high-performance and real-time operation, the simplification of interprocess communications, the isolation of operating system mechanisms from one another, and the separation of mechanisms from policy decisions. Choices is written in C++ and runs on a ten processor Encore Multimax. The system is intended for use in constructing specialized computer applications and research on advanced operating system features including fault tolerance and parallelism.

Campbell, R. H.↗

NASA NTRS1987

Numerical simulations of magnetospheric plasmas - Review and quadrennial report to the IUGG

This article provides a broad survey of U.S. progress during the quadrennium 1983-1986 in the category 'numerical simulations of magnetospheric plasmas'. There has been a substantial increase of activity in this area during this period. Simulations have been instrumental in providing valuable insights into large scale dynamic phenomena, nonlinear effects, and complex kinetic phenomena in a wide variety of subject areas, including shocks and double layers, ionosphere-magnetosphere coupling phenomena, and important microphysical processes such as broadband electrostatic noise. The methodology of computer simulation has also been advanced during this quadrennium. Vlasov algorithms have been improved; hybrid codes in 2 and 3D have been developed and applied to magnetospheric problems; and complex problems have been subjected with increasing frequency to a multipronged attack in which several types of simulation models, each designed to accurately model phenomena within a particular range of temporal or spatial scales, are employed synergistically.

Palmadesso, Peter J.↗

NASA NTRS1988

Assessment, development and application of combustor aerothermal models

The gas turbine combustion system design and development effort is an engineering exercise to obtain an acceptable solution to the conflicting design trade-offs between: combustion efficiency, gaseous emissions, smoke, ignition, restart, lean blowout, burner exit temperature quality, structural durability, and life cycle cost. For many years, these combustor design trade-offs have been carried out with the help of fundamental reasoning and extensive component and bench testing, backed by empirical and experience correlations. Recent advances in the capability of computational fluid dynamics (CFD) codes have led to their application to complex three-dimensional flows such as those in the gas turbine combustor. A number of US. Government and industry sponsored programs have made significant contributions to the formulation, development, and verification of an analytical combustor design methodology which will better define the aerothermal loads in a combustor, and be a valuable tool for design of future combustion systems. The contributions made by NASA Hot Section Technology (HOST) sponsored Aerothermal Modeling and supporting programs are described in this paper.

Aerothermal modeling↗

NASA NTRS1988

Assessment, development, and application of combustor aerothermal models

The gas turbine combustion system design and development effort is an engineering exercise to obtain an acceptable solution to the conflicting design trade-offs between combustion efficiency, gaseous emissions, smoke, ignition, restart, lean blowout, burner exit temperature quality, structural durability, and life cycle cost. For many years, these combustor design trade-offs have been carried out with the help of fundamental reasoning and extensive component and bench testing, backed by empirical and experience correlations. Recent advances in the capability of computational fluid dynamcis codes have led to their application to complex 3-D flows such as those in the gas turbine combustor. A number of U.S. Government and industry sponsored programs have made significant contributions to the formulation, development, and verification of an analytical combustor design methodology which will better define the aerothermal loads in a combustor, and be a valuable tool for design of future combustion systems. The contributions made by NASA Hot Section Technology (HOST) sponsored Aerothermal Modeling and supporting programs are described.

Holdeman, J. D.↗

NASA NTRS1989

Assessment, development, and application of combustor aerothermal models

The gas turbine combustion system design and development effort is an engineering exercise to obtain an acceptable solution to the conflicting design trade-offs between: combustion efficiency, gaseous emissions, smoke, ignition, restart, lean blowout, burner exit temperature quality, structural durability, and life cycle cost. For many years, these combustor design trade-offs have been carried out with the help of fundamental reasoning and extensive component and bench testing, backed by empirical and experience correlations. Recent advances in the capability of computational fluid dynamics (CFD) codes have led to their application to complex three-dimensional flows such as those in the gas turbine combustor. A number of U.S. Govern- ment and industry sponsored programs have made significant contributions to the formulation, development, and verification of an analytical combustor design methodology which will better define the aerothermal loads in a combustor, and be a valuable tool for design of future combustion systems. The contributions made by NASA Hot Section Technology (HOST) sponsored Aero- thermal Modeling and supporting programs are described in this paper

J D Holdeman↗

NASA NTRS1989

Effect of design variables, temperature gradients, and speed on life and reliability of a rotating disk

A generalized methodology to predict the fatigue life and reliability of a rotating disk such as used for aircraft engine turbines and compressors is advanced. The approach incorporates the computed life of elemental stress volumes to predict system life and reliability. Disk speed and thermal gradients as well as design varibles such as disk diameter and thickness and bolt hole size, number and location are considered.

Zaretsky, E. V.↗

NASA NTRS1989

Recent advances in engineering science; Proceedings of the A. Cemal Eringen Symposium, University of California, Berkeley, June 20-22, 1988

Various papers on recent advances in engineering science are presented. Some individual topics addressed include: advances in adaptive methods in computational fluid mechanics, mixtures of two medicomorphic materials, computer tests of rubber elasticity, shear bands in isotropic micropolar elastic materials, nonlinear surface wave and resonator effects in magnetostrictive crystals, simulation of electrically enhanced fibrous filtration, plasticity theory of granular materials, dynamics of viscoelastic media with internal oscillators, postcritical behavior of a cantilever bar, boundary value problems in nonlocal elasticity, stability of flexible structures with random parameters, electromagnetic tornadoes in earth's ionosphere and magnetosphere, helicity fluctuations and the energy cascade in turbulence, mechanics of interfacial zones in bonded materials, propagation of a normal shock in a varying area duct, analytical mechanics of fracture and fatigue.

Koh, Severino L.↗

NASA NTRS1990

Factors shaping the evolution of electronic documentation systems

The main goal is to prepare the space station technical and managerial structure for likely changes in the creation, capture, transfer, and utilization of knowledge. By anticipating advances, the design of Space Station Project (SSP) information systems can be tailored to facilitate a progression of increasingly sophisticated strategies as the space station evolves. Future generations of advanced information systems will use increases in power to deliver environmentally meaningful, contextually targeted, interconnected data (knowledge). The concept of a Knowledge Base Management System is emerging when the problem is focused on how information systems can perform such a conversion of raw data. Such a system would include traditional management functions for large space databases. Added artificial intelligence features might encompass co-existing knowledge representation schemes; effective control structures for deductive, plausible, and inductive reasoning; means for knowledge acquisition, refinement, and validation; explanation facilities; and dynamic human intervention. The major areas covered include: alternative knowledge representation approaches; advanced user interface capabilities; computer-supported cooperative work; the evolution of information system hardware; standardization, compatibility, and connectivity; and organizational impacts of information intensive environments.

Dede, Christopher J.↗

NASA NTRS1991

Robotics in space-age manufacturing

Robotics technologies are developed to improve manufacturing of space hardware. The following applications of robotics are covered: (1) welding for the space shuttle and space station Freedom programs; (2) manipulation of high-pressure water for shuttle solid rocket booster refurbishment; (3) automating the application of insulation materials; (4) precision application of sealants; and (5) automation of inspection procedures. Commercial robots are used for these development programs, but they are teamed with advanced sensors, process controls, and computer simulation to form highly productive manufacturing systems. Many of the technologies are also being actively pursued in private sector manufacturing operations.

Jones, Chip↗

NASA NTRS1992

Computed Turbulent Free Shear Flow Of Air

Standard k-epsilon model of turbulence yields fairly accurate results. Symposium paper discusses numerical simulation of turbulent free shear flow of nonreacting compressible fluid. Ability to compute such flows essential to advances in design.

Viegas, J. R.↗

NASA NTRS1991

Human factors issues in the use of artificial intelligence in air traffic control. October 1990 Workshop

The objective of the workshop was to explore the role of human factors in facilitating the introduction of artificial intelligence (AI) to advanced air traffic control (ATC) automation concepts. AI is an umbrella term which is continually expanding to cover a variety of techniques where machines are performing actions taken based upon dynamic, external stimuli. AI methods can be implemented using more traditional programming languages such as LISP or PROLOG, or they can be implemented using state-of-the-art techniques such as object-oriented programming, neural nets (hardware or software), and knowledge based expert systems. As this technology advances and as increasingly powerful computing platforms become available, the use of AI to enhance ATC systems can be realized. Substantial efforts along these lines are already being undertaken at the FAA Technical Center, NASA Ames Research Center, academic institutions, industry, and elsewhere. Although it is clear that the technology is ripe for bringing computer automation to ATC systems, the proper scope and role of automation are not at all apparent. The major concern is how to combine human controllers with computer technology. A wide spectrum of options exists, ranging from using automation only to provide extra tools to augment decision making by human controllers to turning over moment-by-moment control to automated systems and using humans as supervisors and system managers. Across this spectrum, it is now obvious that the difficulties that occur when tying human and automated systems together must be resolved so that automation can be introduced safely and effectively. The focus of the workshop was to further explore the role of injecting AI into ATC systems and to identify the human factors that need to be considered for successful application of the technology to present and future ATC systems.

Hockaday, Stephen↗

NASA NTRS1992

Future experimental needs to support applied aerodynamics - A transonic perspective

Advancements in facilities, test techniques, and instrumentation are needed to provide data required for the development of advanced aircraft and to verify computational methods. An industry survey of major users of wind tunnel facilities at Langley Research Center (LaRC) was recently carried out to determine future facility requirements, test techniques, and instrumentation requirements; results from this survey are reflected in this paper. In addition, areas related to transonic testing at LaRC which are either currently being developed or are recognized as needing improvements are discussed.

Gloss, Blair B.↗

NASA NTRS1992

A comprehensive comparison between skin and multi-channel sea surface temperatures as derived from AVHRR

Global maps of Satellite Measured Surface Skin Temperature (SMSST), MultiChannel Sea Surface Temperature (MCSST) and Cross Product Sea Surface Temperature (CPSSR) are computed from imagery of the Advanced Very High Resolution Radiometer (AVHRR) for five fortnights in 1984/85. They demonstrate systematic latitudinal variations and regional extremes of the differences with greatest root mean square values of 0.7K between MCSST and SMSST found at low latitudes. Mean differences range from 0.1K between CPSST and SMSST to 0.45K between MCSST and SMSST. A part of the differences might be attributed to the skin cooling at the sea surface. A parameterization of the bulk skin temperature difference is derived from in situ field measurements. This can be used to find a relation between satellite measured bulk and skin temperatures.

Schluessel, Peter↗