Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Accelerator Control System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,135 records · Page 63

extapi-acsys

Provides public APIs to the Fermilab control system. This service exposes several GraphQL endpoints for various, logical APIs that clients may use to retrieve control system data and, in some cases, make changes to the control system. This service is currently running on acsys-proxy.fnal.gov on port 8000 with the development instance on port 8001. The middle layer of the control system uses gRPCs for communications. The GraphQL resolvers of this service use various gRPC services to obtain the information that is returned. This uses the async-graphql and warp crates to provide GraphQL over http support. The resolvers use the tonic crate for gRPC client support.

Neswold, Rich [Fermi National Accelerator Laborato↗

Accelerating Scientific Knowledge Discovery (ASKD) Working Group Report

Sustained scientific progress over the next decade and beyond will require new advanced discovery ecosystems quite different from the computational and collaborative environments in which most research is performed today. These systems will need to connect increasing numbers of scientists, enable use of data and computational services at unprecedented scales, foster scientific discoveries based on ever more complex cross-disciplinary hypotheses, facilitate the immediate sharing and exchange of existing and emerging knowledge, and provide mechanisms for timely control of and feedback to instruments and simulations. To achieve this goal requires computer science research advances in multiple areas.

99 GENERAL AND MISCELLANEOUS↗

Evaluation of Maximum Dose Rate Resulting from Failure of the Linac Charge Monitoring System

This evaluation was prepared in response to a request from the Accelerator Readiness Review Team for NSLS-II Routine Operations. The purpose of this evaluation is to document the maximum dose rate potential for failures in the linac charge monitoring system. It is noted that the probability of such a failure is extremely low and likely never realized. For the failure to occur, the linac injection has to be set to maximum output, monitoring devices as displayed in the Control Room would go unnoticed by the Operators, the Operator on duty would have to fail to recognize the event, other accumulating charge monitors that alarm at ASE limits would also need to fail or would have to go unrecognized by the Operator and finally there would have to be a simultaneous fault in the storage ring to generate dose on the experimental floor. Regardless of these multiple layers of protection, the maximum dose rate to staff on the NSLS-II experimental floor is presented below.

36 MATERIALS SCIENCE↗

Quantum Computing for Quantum Simulation for NNSA Mission

Beginning with Feynman in 1982, it was proposed that highly controllable quantum devices, later to become known as quantum computers, would be especially good at the simulation of other quantum systems. Around the turn of the 21st century, this notion was later formalized (by Lloyd and coworkers at MIT and Laflamme and coworkers at Los Alamos) to show how in particular instances, we expect an exponential speedup in the solution of the Schroedinger equation for chemical systems. Subsequently, quantum-accelerated quantum simulation for chemistry techniques have been developed by IBM, Google, Harvard, etc. This effort has led to the OpenFermion (openfermion.org, OF) community, an open source effort for compiling and analyzing quantum algorithms to simulate fermionic systems, including quantum chemistry. Among other functionalities, the current version of OF features data structures and tools for obtaining and manipulating representations of fermionic and qubit Hamiltonians. In October, 2017, the cover of Chemical and Engineering News posited “Quantum computers: Chemistry could be the machine’s killer app” for first principles understanding of biological systems and complex materials. Prof. Aspuru-Guzik (Harvard) predicts “I think that before 2035 QC will be beating classical computers at chemistry.” The algorithms at the heart of quantum chemistry codes (eigensolvers, fast fourier transforms) are the computation bottleneck.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Building Initial Dynamic System Models for Digital Twins of the Cryogenic Moderator System at the ORNL Spallation Neutron Source

This work describes the initial development of dynamic system models of the cryogenic moderator system (CMS) of the Spallation Neutron Source (SNS) at ORNL as a part of the ORNL LDRD funded project Building TRANSFORM to Accelerate Digital Twin Applications for Nuclear Systems, LOIS 10563. The goal of the work is to start the dynamic system modeling effort with the end goal of using them for real-time applications as digital twins. The CMS is a cryogenic liquid hydrogen flow loop that provides moderation of the neutrons that are generated by the SNS. For optimal neutron production, the CMS needs to maintain a steady and controlled density of cryogenic hydrogen in the moderator section thus requiring precise temperature and pressure control. Due to the varied time scales and system characteristics, control of the system is complex, and diagnostics are also difficult. Difficulty in accessing the flow loop during operations, limited instrumentation and unknown design details of the equipment combine to make the case for having sophisticated digital twin models of the system. Operationally the CMS also provides a strong use case for digital twins due to the constant need of optimization and for troubleshooting/diagnostics. The large amount of data collected which are freely available for using in building the model and verifying and validating the model also makes it a great candidate for a proof-of-concept for digital twins. The project extends ORNL's capacity of development and implementation of the open-source dynamic system modeling tool TRANSFORM for engineering design and digital twin/real-time applications. Specific system configuration data for the CMS have been gathered and an initial dynamic model was created in the TRANSFORM library using Dymola as the solution platform. Models of increasing complexity are created to demonstrate the need for a multi-layered approach in digital twin modeling depending on the scale and phenomena being focused on. The dynamic modeling is shown to bring the dynamic operational aspects to the design process for systems as well as serve as a digital twin to the hardware and allow for models to be tuned and compared against real time operational data. These aims should help to push forward strategic goals of application of digital twins and increase the impact of ORNL systems modeling capabilities with TRANSFORM/Modelica for various advanced energy systems.

42 ENGINEERING↗

The Energy in Modular (EMOD) Buildings Method: A Guide to Energy-Efficient Design for Industrialized Construction of Modular Buildings

Industrialized construction has immense potential to address the growing need globally to build and upgrade the building stock to be affordable, energy-efficient, and resilient. It can also help achieve the United States' goal of a 50% reduction in U.S. greenhouse gas (GHG) emissions by 2030. Despite this potential, and the ever-increasing push for electrification and decarbonization of households in the United States, industrialized construction has not yet been leveraged specifically to help address these challenges and accelerate the pathway to meet these goals. The National Renewable Energy Laboratory (NREL) aims to claim this missed opportunity by focusing on delivering affordable, grid-efficient net-zero energy (NZE) modular buildings for underserved communities to ensure an equitable transition to the future of clean energy, accelerate decarbonization of the built environment, and support the development of a high-productivity construction and energy efficiency workforce. The Energy in Modular (EMOD) method is our approach to designing, producing, and delivering affordable, net-zero energy, low-carbon, and healthier buildings at scale. The following energy efficiency strategies are part of the scope of this guide: envelope thermal control, envelope infiltration control, mechanical, electrical, and plumbing systems, smart controls, and solar plus storage. We draw synergies between design for manufacturing and assembly, process optimization, retrofit technologies, and digitization. Our goal is to influence the improvement and production of buildings to increase performance, enhance energy efficiency, and reduce GHG emissions. This guide documents the research and development efforts initiated by a set of design objectives to "modularize" a set of energy efficiency and low-carbon strategies into a housing unit while preserving and enhancing energy efficiency benefits and decarbonization pathways. This guide is intended to serve as a framework for housing developers, housing agencies, architects, energy experts, and process engineers or factory operator personnel who are critical to today's modular builder teams. This guide focuses on specific energy efficiency strategies, decarbonization pathways, and associated processes as part of NREL's research efforts. Stakeholders may substitute other means, methods, and technologies for the ones evaluated in this study.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Characterization of Biomass-Based Fuels and Fuel Blends for Low-Emissions, Advanced Compression Ignition Engines (Final Report)

The goal of the Co-Optima program was to accelerate deployment of co-optimized fuels and engines that will reduce fuel consumption, and criterion pollutants and greenhouse gas (GHG) emissions for both spark and compression-ignited engines. In this project, combustion measurements from a constant pressure flow rig (CPFR) with optical access were used to assess fundamental combustion behavior of number of different candidate fuels and fuel blends. This chamber and its peripheral systems allowed stable control of ambient air pressure and temperature and fuel injection pressure and timing for hundreds of repeat injections allowing statistical interpretation of the results. The optical diagnostics enabled capturing of liquid length, vapor length, ignition timing, lift-off length as well as localized (temporal and spatially resolved) mixture refractive index, flame structure, and soot mass. The operating conditions allowed the study of combustion conditions promoting lean lifted flame combustion (LLFC), a mixing-controlled low-temperature combustion (LTC) strategy to reduce soot production in Advanced Compression Ignition (ACI) engines.

09 BIOMASS FUELS↗

Real Time, In-line Monitoring of Hanford Tank Wastes - Year 1 Report

The team comprised of students, postdocs, early, mid and senior career scientists from Los Alamos National Laboratory, Savanah River National Laboratory, Georgia Tech and Florida International University, with the guidance of H2C, is developing a suite of in-line instruments for the Hanford high level waste (HLW) and low active waste (LAW) processes to provide near-real-time analysis of waste form physical properties and composition. The work builds on results from the recent DOE-ORP, EM Technology Development and other projects that demonstrated promise for the use of real-time in-line monitoring (RTIM) to measure chemical compositions of slurries of up to 20 weight % solids. The goal is for this instrument suite is to substantially reduce the need for sampling for process control. Sample waste, exposure associated with sample analysis, and the demand for an external laboratory facility would be greatly reduced. The throughput of waste treatment systems would be improved by elimination of the downtime caused by waiting for sample results. This translates into reduced process storage as process knowledge will be continuously updated in near-real-time. These breakthrough technologies would significantly reduce the life cycle cost and accelerate the schedule for the Hanford tank waste mission.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Proceedings of Synthetic Biology: Engineering, Evolution and Design (SEED) Conference 2015

Synthetic Biology is an emerging discipline that seeks to accelerate the process of engineering biology. As such, the tools are broadly applicable to application areas, including chemicals and biofuels, materials, medicine and agriculture. A characteristic of the field is to look holistically at cellular design, from sensing and genetic circuitry to the manipulation of cellular processes and actuators, to controlling metabolism, to programming multicellular behaviors. Further, the types of cells that are manipulated are broad, from in vitro systems to microbes and fungi to mammalian and plant cells and living animals. Many of the projects in synthetic biology seek to move biochemical functions across organisms. The field is highly interdisciplinary with faculty and students spread across departments that focus on engineering (biological, chemical, electrical, mechanical, civil, computer science) and basic science (biology and systems biology, chemistry, physics). While there have been many one-off workshops and meeting on synthetic biology, the 2014 Synthetic Biology: Engineering, Evolution and Design (SEED) was the first of an annual conference series that serves as a reliable place to pull together the involved disciplines in order to organize and exchange advances in the science and technology in the field. Further, the SEED conferences have a strong focus on industry, with many companies represented and actively participating. A number of these companies have started major efforts in synthetic biology including large companies (e.g., Pfizer, Novartis, Dow, Dupont, BP, Total), smaller companies have recently gone public (e.g., Amyris, Gevo, Intrexon), and many start-ups (e.g., Teslagen, Refactored Materials, Pivot, Genomatica). There are a number of loosely affiliated Synthetic Biology Centers, including ones at MIT, Boston University, UCSD, UCSF, UC-Berkeley, Imperial College, Oxford, and ETH. SEED 2015 will serve as the primary meeting at which international synthetic biology centers and related infrastructure (synthesis/software/foundries) meet to discuss technology, standards, and education. SEED2015 will be the second in an annual series of meeting held to bring researchers from industry and academia in the area of Synthetic Biology. The first SEED conference was highly successful, attracting 285 attendees with varying backgrounds from academia, industry and government. The SEED series provides leadership in the development of the field of synthetic biology and serves to broaden the participants in the field by appealing to broad sectors in industry and providing a means for young investigators and those outside of the field to participate. Further, the series closely integrates with groups such as the SBCC to provide a means by which the synthetic biology community can communicate with policy makers. Further, we will pursue making the meeting the center for the exchange of educational materials as centers for synthetic biology emerge globally. Proceedings will be published each year in the journal ACS Synthetic Biology. After each SEED meeting, surveys are distributed to assess the success of the conference and to help guide changes year-to-year. The diverse application areas further extend the expertise needed from people in areas such as plant biology, agriculture and soil science, environmental science, medicine, and the chemical industry. These areas could have a widespread impact on society in a number of ways. For example, the CRISPR/Cas9 system that serves to immunize bacteria from phage has provided the fundamental chemistry that is used to edit the genomes of diverse organisms, including human stem cells, crop plants, and livestock animals.

09 BIOMASS FUELS↗

Accelerating Thermochemical Equilibrium Calculations for Nuclear Reactor Applications

Thermochemical properties play a key role in modeling and simulation of several key phenomena in nuclear reactors. There has been an increasing interest in incorporating CALPHAD-based formulations in multiphysics simulations including for Molten Salt Reactors where knowledge of phase evolution of the salt and the chemical potentials of various elements are of utmost importance in source term analyses and redox control. However, the size of such simulations is often limited by the high computational cost of full thermodynamic equilibrium calculations. This work discusses the current efforts aimed at accelerating thermochemical equilibrium calculations for multiphysics simulations performed using the open-source finite element / finite volume code Multiphysics Object Oriented Simulation Environment (MOOSE) [1]. While several methods have been proposed for accelerating phase equilibrium calculations [2], most focus on relatively small systems and often rely on a- priori knowledge of the state-space of the system. Nuclear materials, however, are often multi-component systems owing to the evolution of composition under irradiation and an approach based on a-priori mapping of phase diagram is often not enough. This work is aimed at demonstrating an on-the-fly surrogate modeling framework that uses active learning to reduce the number of full equilibrium calculations that must be performed. By combining with efficient coupling approaches, the surrogate framework helps in reducing the computational cost of thermodynamic equilibrium informed multiphysics simulations of nuclear materials. The performance is benchmarked against full coupling with the thermochemistry library Thermochimica [3]. This work uses a machine learning based approach for constructing surrogate models to predict the stable phases in a multicomponent system. The surrogates were constructed using neural networks and Gaussian process classification. In this work, we compare the relative performance of the two methods. We also demonstrate the use of caching previous calculations by interpolating the values from nearest neighbors. References [1] Lindsay, A.D., et al. "2.0 – MOOSE: Enabling massively parallel multiphysics simulation", SoftwareX, 20 (2022): 101202. [2] Roos, W.A. and Zietsman J.H. "Accelerating complex chemical equilibrium calculations – A Review", Calphad, 77 (2022): 102380. [3] Piro, M.H.A., et al. "The thermochemistry library Thermochimica", Computational Materials Science, 67 (2013): 266-272.

36 MATERIALS SCIENCE↗

An Advanced Extreme Environment Wireless Telemetry System for Turbine Blade Instrumentation

As advanced natural gas power generation systems evolve, the thrust for increased efficiencies and reduced emissions results in increasingly harsh conditions inside the turbine environment. These high temperatures, pressures, and corrosive atmospheres result in accelerated rates of degradation, leading to failure of turbine materials and components. The University of Arkansas (UA) and Siemens, in collaboration with the DoE's National Energy Technology Laboratory (NETL), are developing a reliable and long-term monitoring capability in the turbine hot gas path in the form of novel ceramic-based thermocouples and integrated wide band gap instrumentation electronics that will contribute to the overall reliability of gas turbines. When equipped with better monitoring and controls, power plants can operate with increased fuel-burning efficiency, improved process dynamics and gas concentrations, and increased overall longevity of the power plant components. This will result in increased turbine availability and a reduction in outages and maintenance costs. One of the key aspects to driving forward turbine monitoring capability is the development of high temperature capable integrated circuit (IC) electronics. Previous papers have described 500 °C + electronics that were developed primarily from a combination of discrete single transistors combined with supporting high temperature passive components. While these circuits have been tested successfully in high temperature spin test environments, the move to an IC approach will greatly increase the performance and reliability of turbine monitoring systems. This program is developing such capability through the implementation of silicon carbide (SiC) based ICs, and this paper details the initial approach and early testing of the developed devices. This research represents an important step towards the realization of a field deployable high reliability turbine condition monitoring system.

47 OTHER INSTRUMENTATION↗

Convergence of Vehicle and Infrastructure Data for Traffic and Demand Management

The increasing availability of highly granular, vehicle trajectory data combined with ever increasing stores of roadway sensor data has provided unparalleled observability into the operation of our urban roadway networks. These data sources are quickly moving from research and prototype environments into full-scale commercial deployment and data offerings. The observability gained allows for increased control opportunities to enhance transportation mobility, safety and energy efficiency. The National Renewable Energy Laboratory (NREL) is involved in three initiatives to leverage these data for positive outcomes: 1) In 2015 NREL, in cooperation with industry and university partners, was awarded an ARPA-E research grant to research a control architecture to incentivize individual travelers toward more sustainable travel behavior. Based on real-time data on the traveler's destination and state of the system, the traveler is presented with route and/or mode choices and offered incentives to accept sustainable alternatives over less-sustainable ones. The project tests the extent to which small incentives can influence, or tip the balance toward more sustainable travel behavior. 2) Although commercial sources of travel time and speed have emerged in recent years based on vehicle probe data, volume estimates continue to rely primarily on historical count data factored for the time of day, day of week, and season of year. Real-time volume flows would enable better tools, simulation in the loop, and ultimately more effective control outcomes. NREL in cooperation with the University of Maryland and industry traffic data providers (INRIX, HERE and TomTom), are attempting to accelerate the timeframe to a viable real-time vehicle volume data feed based on probe data. 3) Signal control on urban arterials for years has had to rely on models rather than measured data to assess performance. High-resolution controller data and low-cost re-identification data now allows for direct measurement of the quality of progression along a corridor. Though still requiring an investment in equipment and communications, these data sources are transforming traffic signal management to a data driven, performance management basis. Ever increasing availability of granular GPS trace data from automobiles may allow for assessment of traffic signal performance, allowing for signal optimization while minimizing the investment in additional sensors and communication infrastructure.

33 ADVANCED PROPULSION SYSTEMS↗

2019 Wireless Test Bed Range Manual

Idaho National Laboratory (INL), Next Generation Wireless Test Bed (NGWTB) program, is part of the Critical Infrastructure Protection (CIP) initiative. Our nation’s reliance on wireless and Internet technology is rapidly evolving as more corporations and government agencies, employees, and handheld devices include mobile connectivity for both voice and data. The competitive advantage offered by a mobile workforce is leading many corporations to make wireless integration and convergence a top business priority. Similarly, military systems worldwide are rapidly embracing next-generation commercial technologies to accelerate network-centric capabilities and provide enhanced situational awareness. While handheld devices such as laptops, BlackBerrys, and cell phones once had limited mobility and range, they are rapidly incorporating new and multiple protocols such as Bluetooth, Wi-Fi, Satellite, and broadband cellular (3G/4G) on a single platform to increase their effectiveness and agility. Worldwide there is exponential growth in public Wi-Fi and/or Satellite connectivity access nodes, and 3G/4G cellular continues to evolve and expand the range and speed of these devices. Additionally, critical infrastructure networks, previously isolated or connected with dedicated wireline circuits, are incorporating Zigbee for wireless sensor networks, wireless LANs for maintenance functions, and cellular or Internet based backhaul to manage control centers. Yet with all the build-up surrounding wireless technology, few understand the complexities surrounding wireless protocols and security, the risks of converged network infrastructures, need for interoperability of communication systems, or mitigation measures to safely use and improve new technologies in both commercial and military environments. With no single vendor source for all the telecommunications equipment needed for wireless infrastructure upgrades, and no one entity providing end-to-end testing or independent validation, the INL's NGWTB program fulfills a niche for facilitating integrated testing of multiple technologies, across multiple wireless domains, of next generation wireless telecommunications systems. NGWTB engineers and technicians have constructed and operate domain infrastructure in the Wireless Personal Area Network (WPAN), Wireless Local Area Network (WLAN), Wireless Metropolitan Area Networks (WMAN), and Wireless Wide Area Networks (WWAN). Advantages that make the INL's NGWTB the place to conduct project and programmatic testing include: • NTIA Experimental Station authority • Geographically isolated and low-noise radio frequency (RF) test areas located on a 890 sm DOE reservation • Access to isolated high-speed LAN and FOT networks The rollout of next-generation networks will involve deploying new technologies at every level including new: handsets, frequencies, antenna arrays, cell configurations that are optimized for both data and voice, massive upgrade of cell controllers’ “land-line” phone links from low bandwidth connections to higher capacity fiber or wireless backhaul, and integration of voice switching and Internet/data network protocols (Voice-Over-IP, Web phones). These systems are expected to greatly transform our nation's communications infrastructure and the types of services it provides.

2G↗

Implementation of a coupled treatment of the one-turn mapping in the ray-tracing code Zgoubi

The spin is an intrinsic property of elementary particles and is considered as a quantum angular momentum. It is defined by a direction which is either up or down and an absolute value which is proportional to the elementary quantum of action. It has no analogue in classical mechanics but, as the angular momentum in classic mechanics, the spin of composite systems such as the proton is a combination of its spin components. Although knowing the proton components and their spin, their contribution to the proton spin is unknown and the physicists are still trying to unravel the mystery. A recent theoretical work suggests that the contribution carried by the gluons may be large but it has to be confirmed experimentally. The main accelerator facility which is looking for answers about the origin of the proton spin is located at the Brookhaven National Laboratory (Upton, New York, United States of America). This laboratory has the biggest accelerator complex dedicated to the colliding of polarized proton beam. The protons are first supplied by the Optically Pumped Polarized Ion Source (OPPIS), followed by a 200-MeV Linac and are then transferred to the Booster synchrotron. The protons go into the Alternating Gradient Synchrotron (AGS) which accelerate and prepair them to be injected into the Relativistic Heavy Ion Collider (RHIC). Finally the proton beam is stored into the RHIC ring for several hours and supplies collisions in two detectors of particle experiments placed. The data collected are used for studying the decay products of polarized proton collisions. Although the current RHIC spin experiments are already providing the first information about the proton's spin origin, the complex RHIC is still under improvement. Indeed it is working at minimizing undesirable effects which damage the beam polarization along the acceleration. The polarized proton beam is prone to depolarization due to spin resonances. They could be partially avoided by improving the control of some beam parameters. For instance coupling between the two transverse motions occurs in AGS and modifies the beam parameters predicted by the simulations. The locations of all the coupling sources in the AGS are not really known which makes their removal or compensation difficult to elaborate. This requires improving the simulations of beam dynamics made in the AGS. They need to be performed with, on one hand, a very accurate model and, on the other hand, a code capable of analyzing a coupled motion. Two codes are mainly used: MADX and a ray-tracing code called ZGOUBI 4 which is developing by Dr. François MÉOT. It is scheduled to install ZGOUBI onto the computers of the RHIC complex main control room in order to facilitate and extend its use. Nevertheless ZGOUBI is not completely able to deal with coupled one-turn mapping produced by the ray-tracing so it is necessary to find a way of treating the coupled systems and to implement it within the existing code, that will allow producing coupled optical functions and transporting them using the ray-tracing method. The purpose of this report is to present the results of my research work performed during this 5-month internship. It mainly consisted in searching and synthesizing the appropriate formalism in order to fully treat the coupled which outcomes from ZGOUBI. It required to nd a way of implementing it into the existing ZGOUBI code then to test it. Finally after validation of these add-ons some simulations have been handled by ZGOUBI for the AGS.

43 PARTICLE ACCELERATORS↗

On the determination of reference levels for quality assurance of flattening filter free photon beams in radiation therapy

Purpose: New definitions for some dosimetric parameters for use in quality assurance of flattening filter free (FFF) beams generated by medical linear accelerators have been suggested. The present study aims to validate these suggestions and to propose possible reference levels. Methods: The main characteristics of FFF photon beams were described in terms of: field size, penumbra, unflatness, slope, and peak-position parameters. Data were collected for 6 and 10 MV-FFF beams from three different Varian TrueBeam Linacs. Measurements were performed with a 2D-array (Starcheck system from PTW-Freiburg) and with the portal dosimetry method GLAaS utilizing the build-in portal imager of TrueBeam. Data were also compared to ion chamber measurements. A cross check validation has been performed on a FFF beam of 6 MV generated by a Varian Clinac-iX upgraded to FFF capability. Results : All the parameters suggested to characterize the FFF beams resulted easily measurable and little variation was observed among different Linacs. Referring to two reference field sizes of 10 × 10 and 20 × 20 cm{sup 2}, at SDD = 100 cm and d = dmax, from the portal dosimetry data, the following results (averaging X and Y profiles) were obtained. Field size: 9.95 ± 0.02 and 19.98 ± 0.03 cm for 6 MV-FFF (9.94 ± 0.02 and 19.98 ± 0.03 cm for 10 MV-FFF). Penumbra: 2.7 ± 0.3 and 2.9 ± 0.3 mm for 6 MV-FFF (3.1 ± 0.2 and 3.3 ± 0.3 for 10 MV-FFF). Unflatness: 1.11 ± 0.01 and 1.25 ± 0.01 for 6 MV-FFF (1.21 ± 0.01 and 1.50 ± 0.01 for 10 MV-FFF). Slope: 0.320 ± 0.020%/mm and 0.43 ± 0.015%/mm for 6 MV-FFF (0.657 ± 0.023%/mm and 0.795 ± 0.017%/mm for 10 MV-FFF). Peak Position −0.2 ± 0.2 and −0.4 ± 0.2 mm for 6 MV-FFF (−0.3 ± 0.2 and 0.7 ± 0.3 mm for 10 MV-FFF). Results would depend upon measurement depth. With thresholds set to at least 95% confidence level from the measured data and to account for possible variations between detectors and methods and experimental settings, a tolerance set of: 1 mm for field size and penumbra, 0.04 for unflatness, 0.1%/mm for slope, and 1 mm for peak position could be proposed from our data. Conclusions : The parameters proposed for the characterization and routine control of stability of profiles of FFF beams appear to be a viable solution with a strong similarity to the conventional parameters used for flattened beams. The results from three different TrueBeams and the cross-validation against a Clinac-iX suggested the possible generalization of the methods and the possibility to use common tolerances for the parameters. The data showed also the reproducibility of beam characteristics among different systems (of the same vendor) and the resulting parameter values could therefore be possibly generalized.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Machine Protection System for the Stepper Motor Actuated SyLMAND Mirrors

SyLMAND, the Synchrotron Laboratory for Micro and Nano Devices at the Canadian Light Source, consists of a dedicated X-ray lithography beamline on a bend magnet port, and process support laboratories in a clean room environment. The beamline includes a double mirror system with flat, chromium-coated silicon mirrors operated at varying grazing angles of incidence (4 mrad to 45 mrad) for spectral adjustment by high energy cut-off. Each mirror can be independently moved by two stepper motors to precisely control the pitch and vertical position. We present in this paper the machine protection system implemented in the double mirror system to allow for safe operation of the two mirrors and to avoid consequences of potential stepper motor malfunction.

43 PARTICLE ACCELERATORS↗

Integration of the Super Nova early warning system with the NOvA Trigger

The NOvA experiment, with a baseline of 810km, samples Fermilab’s upgraded NuMI beam with a Near Detector on-site and a Far Detector (FD) at Ash River, MN, to observe oscillations of muon neutrinos. The 344,064 liquid scintillator-filled cells of the 14 kton FD provide high granularity of a large detector mass and enable us to also study non-accelerator based neutrinos with our Data Driven Trigger framework. This paper will focus on the real time integration of the SNEWS with the NOvA Trigger where we have set up an XML-RPC based messaging system to inject the SNEWS signal directly into our trigger. In conclusion, this presents a departure from the E-Mail based notification mechanism used by SNEWS in the past and allows NOvA more control over propagation and transmission timing.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High Level Synthesis of RDF Queries for Graph Analytics

In this paper we present a set of techniques that enable the synthesis of efficient custom accelerators for memory intensive, irregular applications. To address irregular applications challenges (large memory footprints, unpredictable fine- grained data accesses, and high synchronization intensity), and exploit their opportunities (thread level parallelism, memory level parallelism), we propose a novel accelerator design which take advantage of an adaptive and Distributed Controller (DC) architecture, and a Memory Interface (MI) that supports parallel memory subsystems. Among the multitude of algorithms that may benefit from our solution, we focus on the acceleration of graph analytics applications, and in particular, on the syn- thesis of SPARQL queries on Resource Description Framework (RDF) databases. We achieve this objective by incorporating the synthesis techniques into Bambu, an Open Source high- level synthesis tools, and interfacing the system with GEMS, the Graph database Engine for Multithreaded Systems. The front- end of GEMS generates optimized C implementations of the input queries, modeled as pattern matching routines, which are then automatically synthesized by Bambu. We validate our approach synthesizing several SPARQL queries from the Lehigh University Benchmark (LUBM).

HLS, FPGA, Convey, RDF, GEMS, Memory-intensive,↗