SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A low-density article comprising a flexible substrate and a pyrolizable material impregnated therein, methods of preparing, and devices using the article are disclosed. The pyrolizable material pyrolizes above 350 C and does not flow at temperatures below the pyrolysis temperature. The low-density article remains flexible after impregnation and continues to remain flexible when the pyrolizable material is fully pyrolized.
No abstract available
A detailed molecular surface chemistry model for the DSMC (Direct Simulation Monte Carlo) method is proposed and implemented into the SPARTA (Stochastic PArallel Rarefied-gas Time-accurate Analyzer) DSMC solver. Molchanova et al. constructed a molecular model for surface recombination in DSMC that includes different surface processes (adsorption, desoprtion, Eley-Rideal and Langmuir-Hinshelwood). All surface processes can be divided into two groups: surface mechanisms, which involve only the particle adsorbed by the surface (desorption and Langmuir-Hinshelwood), and impact mechanisms, which also involve gas-phase particles (adsorption, Eley-Rideal). Using a similar approach, the 14-reaction kinetic model of oxygen-carbon interaction suggested by Zhlukhtov and Abe, as well as more recent models by Alba et al., Poovathinghal et al., and a new model developed in the scope of this work, are implemented in SPARTA. The computational results for the different oxidation models are compared with experimental results from Murray et al. (oxidation of a vitreous carbon surface due to a hyperthermal beam of O and O2), with a particular focus on fluxes, angular and Time-Of-Flight distributions of scattered particles.
With the successful flight test of the Orion Multipurpose Crew Vehicle last December, NASA is well on its way to sending humans into deep space with the goal of putting astronauts on Mars in the 2030s. Orion will receive some upgrades for its next launch in 2018 including a newly developed 3D Quartz Cyanate Ester composite material for the compression pad. The compression pads are 10-inches in diameter and 3-inches thick. The pucks are at 4 locations in the heat shield that serve as a part of the mechanism for holding the Crew and Service modules together during most mission phases prior to separation followed by Earth re-entry. Thus the compression pad has structural, aerothermal and thermal protection requirements.This paper describes the approach used for developing the new 3D composite, including continuous 3D weaving on an automated loom followed by resin transfer molding. Mechanical, thermal and arc jet testing of the 3D composite are also described.
This presentation gives examples of NASA capability in using commercial tools to solve real world problems in a variety of industries.
Tests were performed to demonstrate the feasibility of a new method of measuring surface recession of a material sample during arc-jet testing in the NASA Ames mARC subscale developmental facility. The measurement principle was inspired through tracer elements such as Ca and Na which were seen in the spectra taken during the airborne observation campaign of the Stardust re-entry and which could be clearly observed standing out against the emission spectra emitted by postshock layer and glowing surface of the re-entry capsule. The measurement principle involves seeding of the heat shield materials at a defined depth with tracer elements which show strong and characteristic emission lines in the post shock plasma. Once the material recession reaches the seeding depth, these elements get into the hot plasma and show up in the emission spectra. The methodology was successfully demonstrated during arc-jet testing of phenolic impregnated carbonablator (PICA) material which was seeded in depth with a mixture of NaCl and MgCl in powder form. In the emission spectroscopy data, the emission lines of Mg and Na showed up about 1.5 seconds after probe insertion into the arc-jet plasma and vanished after another 2.5 seconds when recessionhad consumed the seeding material. From these data, a recession rate of about 1 mm/s is estimated.The heat flux during the test was measured to be 2575 W/sq cm on a hemispherical heat flux probewhich corresponds to a heat flux of 1036 W/sq cm on the rectangular test articles. An estimate for a lower limit of the surface temperature of 2800K during the test was obtained by fitting Planck radiation to the continuum spectra emitted by the PICA sample. Typical recession rates of PICA during testing in the large arc-jet facilities at similar test conditions are reported to be on the order of 0.05 to 0.1 cm/s which agrees well with the recession rates of 0.05-0.06 cm/s estimated from the emission spectroscopy data. Further tests under better controlled conditions are suggested to quantify this measurement method. Through a different choice of seeding materials with lower melting point, an extension of the measurement principle to monitor char depth seems feasible but was not yet demonstrated. Possible applications besides ground testing are recession and possibly char depth measurements during real re-entry. Detection through emission spectroscopy could be accomplished through ground based or airborne observation as performed during the Stardust and Hayabusa re-entries, or through on-board spectrometers. A suitable mission would be the re-entryof the OSIRIS-REX mission planned for late 2023. The measured data are presented and interpreted, the results and details of future applications are discussed.
With the successful flight test of the Orion Multipurpose Crew Vehicle last December, NASA is well on its way to sending humans into deep space with the ultimate goal of putting astronauts on Mars in the 2030s. Orion will receive some upgrades for its next launch in 2018 including a newly developed 3D quartz / cyanate ester composite material for the compression pad. Multiple pad locations in the heat shield serve as a part of the mechanism for holding the Crew and Service Modules together during most mission phases prior to separation followed by Earth re-entry of the Crew Module. Thus the compression pad must survive structural and aerothermal loads, and protect the adjascent structure and heat shield materials from over-heating.This paper describes the approach used for developing the new 3D composite, including continuous 3D weaving on an automated loom followed by resin transfer molding. Mechanical, thermal, arc jet ,and stress relaxation testing of the 3D composite are also described.
No abstract available
Absolute age determination isnecessary to check and calibratethe relative Martian chronologypresently available from meteoriticcrater counting.
The focus of this work is on carbon clusters, hydrocarbons and other carbonaceous species which are constituents of pyrolysis gases injected into the boundary layer. Some of these molecules are observed to have absorption spectra in the VUV and UV region that match the emission spectra of atomic nitrogen and oxygen. Hence, they can potentially absorb the radiation impinging on the heat shield. Accurate thermodynamic data is not available for many of these species over the relevant temperature range for reentry. The objective of this work is to determine the thermochemical properties of potential radiation absorbing molecules using accurate ab initio quantum chemistry calculations. We have compiled a database of formation enthalpies, anharmonic vibrational frequencies and rotational constants for the ground and low-lying excited electronic states of these carbonaceous species. Using these thermochemical properties, we compute equilibrium mole fractions and observe that the mole fractions of some species of interest are significant, thus they could affect the radiative heat flux. Furthermore, comparisons of the formation enthalpies and mole fractions are made with data from literature.
No abstract available
No abstract available
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.