Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Characteristics of Non-Premixed Turbulent Flames in Microgravity

This project is concerned with the characteristics of turbulent hydrocarbon (primarily propane) gas-jet diffusion flames in microgravity. A microgravity environment provides the opportunity to study the structure of turbulent diffusion flames under momentum-dominated conditions (large Froude number) at moderate Reynolds number which is a combination not achievable in normal gravity. This paper summarizes progress made since the last workshop. Primarily, the features of flame radiation from microgravity turbulent jet diffusion flames in a reduced gravity environment are described. Tests were conducted for non-premixed, nitrogen diluted propane flames burning in quiescent air in the NASA Glenn 5.18 Second Zero Gravity Facility. Measured flame radiation from wedge-shaped, axial slices of the flame are compared for microgravity and normal gravity flames. Results from numerical computations of the flame using a k-e model for the turbulence are also presented to show the effects of flame radiation on the thermal field. Flame radiation is an important quantity that is impacted by buoyancy as has been shown in previous studies by the authors and also by Urban et al. It was found that jet diffusion flames burning under microgravity conditions have significantly higher radiative loss (about five to seven times higher) compared to their normal gravity counterparts because of larger flame size in microgravity and larger convective heat loss fraction from the flame in normal gravity. These studies, however, were confined to laminar flames. For the case of turbulent flames, the flame radiation is a function of time and both the time-averaged and time-dependent components are of interest. In this paper, attention is focused primarily on the time-averaged level of the radiation but the turbulent structure of the flame is also assessed from considerations of the radiation power spectra.

Hegde, U.↗
NASA NTRS1972

Diffusion freezeout in gas-loaded heat pipes.

Experimental diffusion freezeout rates in a gas loaded heat pipe are presented and compared with predictions of an analysis and computer program published earlier. The experimental approach was to pivot a heat pipe on knife edges and use an analytical mass balance to measure the rate of mass migration within the pipe. Diffusion freezeout rates in a water heat pipe were measured as a function of the condenser sink temperature and the condenser-to-sink thermal conductance. Measured rates varied between 19 and 270 mg/hr and yielded 64 to 99 percent agreement with predicted values. These results indicated that the analysis and computer program for predicting the behavior of gas loaded heat pipes are useful tools for designing such systems.

Marcus, B. D.↗
NASA NTRS1974

Parametric thermodynamic analysis of closed-cycle gas-laser operation in space

Cycle efficiency and radiator area required were calculated for thermally and electrically pumped lasers operating in closed cycles with a compressor and the required heat exchangers. A thermally pumped laser included within a Brayton cycle was also analyzed. Performance of all components, including the laser, was parametrically varied. For the thermally pumped laser the cycle efficiencies range below 10 percent and are very sensitive to the high-pressure losses associated with the supersonic diffuser required at the laser cavity exit. The efficiencies predicted for the electrically pumped laser cycles range slightly higher, but radiator area also tends to be larger.

Burns, R. K.↗
NASA NTRS1975

Design of a heat pipe governed thermal control system for the Solar Electric Propulsion Stage /SEPS/

A 2200-w capacity spacecraft heat rejection system designed for the SEPS and utilizing heat pipe radiator panels has been investigated. The total thermal control system consists of two radiator panels connected to the heat source by variable conductance heat pipes (VCHP's). The system was designed to operate in the 223 to 333 temperature range. The radiators have an emittance of 0.88 at their operational temperature and a fin efficiency of approximately 80 percent. The radiators are thermally isolated from the SEPS and environment by multilayer insulation and thermal shields. Butane was selected as the working fluid for the VCHP because of its low freezing point (135), which is necessary to prevent diffusion freezeout of the liquid during the cold outbond missions. Helium was selected for the control gas. This paper describes the VCHP system, discusses the system design parameters and presents the results of the analyses.

Ruttner, L. E.↗
NASA NTRS1979

Spatial distribution and broad-band spectral characteristics of the diffuse X-ray background, 0.1 - 1.0 keV

Preliminary maps covering more than 85 percent of the sky are presented for three energy bands: the B band, the C band, and the M band. The study was undertaken to find evidence that most of the diffuse X-ray background at energies less than 1 keV is local to the galaxy and that it is most probably due to thermal radiation from a low density plasma which fills a substantial fraction of interstellar space. A preliminary analysis of the data is provided including a report that most of the B and C band flux has a common origin, probably in a 10 to the 6th power K region surrounding the Sun, and that most of the M band flux does not originate from the same material.

Mccammon, D.↗
NASA NTRS1985

Impurities in silicon solar cells

Metallic impurities, both singly and in combinations, affect the performance of silicon solar cells. Czochralski silicon web crystals were grown with controlled additions of secondary impurities. The primary electrical dopants were boron and phosphorus. The silicon test ingots were grown under controlled and carefully monitored conditions from high-purity charge and dopant material to minimize unintentional contamination. Following growth, each crystal was characterized by chemical, microstructural, electrical, and solar cell tests to provide a detailed and internally consistent description of the relationships between silicon impurity concentration and solar cell performance. Deep-level spectroscopy measurements were used to measure impurity concentrations at levels below the detectability of other techniques and to study thermally-induced changes in impurity activity. For the majority of contaminants, impurity-induced performance loss is due to a reduction of the base diffusion length. From these observations, a semi-empirical model which predicts cell performance as a function of metal impurity concentration was formulated. The model was then used successfully to predict the behavior of solar cells bearing as many as 11 different impurities.

Hopkins, R. H.↗
NASA NTRS1985

Teflon, Kapton surface and bulk effects

Two samples of 2 mil aluminized/Kapton thermal blanket and two samples of Teflon were received for evaluation. Their location on the solar maximum is given. The Kapton top layer of the thermal blanket had been exposed to the LEO atomic oxygen environment and shows the surface degradation due to atomic oxygen attack resulting in a diffuse character over most of the surface. The backside Kapton layer which was unexposed appeared to the eye to be in virgin condition. Another sample exhibited similar properties, but was, in large part, covered with Kapton adhesive tape and it was not possible to obtain usable specimens for analysis. One of the Teflon samples which was exposed shows signs of heavy degradation including attack on the Ag/Inconel backside by ultraviolet and atomic oxygen. The other Teflon sample which was unexposed was only slightly fogged on the Teflon side and the Ag/Inconel appeared untouched. These samples were subjected to several chemical and physical analyses, the results of which are discussed.

J C Robinson↗
NASA NTRS1988

Applications of an exponential finite difference technique

An exponential finite difference scheme first presented by Bhattacharya for one dimensional unsteady heat conduction problems in Cartesian coordinates was extended. The finite difference algorithm developed was used to solve the unsteady diffusion equation in one dimensional cylindrical coordinates and was applied to two and three dimensional conduction problems in Cartesian coordinates. Heat conduction involving variable thermal conductivity was also investigated. The method was used to solve nonlinear partial differential equations in one and two dimensional Cartesian coordinates. Predicted results are compared to exact solutions where available or to results obtained by other numerical methods.

Handschuh, Robert F.↗
NASA NTRS1997

Joining of Silicon Carbide-Based Ceramics by Reaction Forming Method

Recently, there has been a surge of interest in the development and testing of silicon-based ceramics and composite components for a number of aerospace and ground based systems. The designs often require fabrication of complex shaped parts which can be quite expensive. One attractive way of achieving this goal is to build up complex shapes by joining together geometrically simple shapes. However, the joints should have good mechanical strength and environmental stability comparable to the bulk materials. These joints should also be able to maintain their structural integrity at high temperatures. In addition, the joining technique should be practical, reliable, and affordable. Thus, joining has been recognized as one of the enabling technologies for the successful utilization of silicon carbide based ceramic components in high temperature applications. Overviews of various joining techniques, i.e., mechanical fastening, adhesive bonding, welding, brazing, and soldering have been provided in recent publications. The majority of the techniques used today are based on the joining of monolithic ceramics with metals either by diffusion bonding, metal brazing, brazing with oxides and oxynitrides, or diffusion welding. These techniques need either very high temperatures for processing or hot pressing (high pressures). The joints produced by these techniques have different thermal expansion coefficients than the ceramic materials, which creates a stress concentration in the joint area. The use temperatures for these joints are around 700 C. Ceramic joint interlayers have been developed as a means of obtaining high temperature joints. These joint interlayers have been produced via pre-ceramic polymers, in-situ displacement reactions, and reaction bonding techniques. Joints produced by the pre-ceramic polymer approach exhibit a large amounts of porosity and poor mechanical properties. On the other hand, hot pressing or high pressures are needed for in-situ displacement reactions and reaction bonding techniques. Due to the equipment required, these techniques are impractical for joining large or complex shaped components.

Singh, M.↗
NASA NTRS1999

Evaluation of Space Power Materials Flown on the Passive Optical Sample Assembly

Evaluating the performance of materials on the exterior of spacecraft is of continuing interest, particularly in anticipation of those applications that will require a long duration in low Earth orbit. The Passive Optical Sample Assembly (POSA) experiment flown on the exterior of Mir as a risk mitigation experiment for the International Space Station was designed to better understand the interaction of materials with the low Earth orbit environment and to better understand the potential contamination threats that may be present in the vicinity of spacecraft. Deterioration in the optical performance of candidate space power materials due to the low Earth orbit environment, the contamination environment, or both, must be evaluated in order to propose measures to mitigate such deterioration. The thirty two samples of space power materials studied here include solar array blanket materials such as polyimide Kapton H and SiO(x) coated polyimide Kapton H, front surface aluminized sapphire, solar dynamic concentrator materials such as silver on spin coated polyimide and aluminum on spin coated polyimide, CV 1144 silicone, and the thermal control paint Z-93-P. The physical and optical properties that were evaluated prior to and after the POSA flight include mass, total, diffuse, and specular reflectance, solar absorptance, and infrared emittance. Additional post flight evaluation included scanning electron microscopy to observe surface features caused by the low Earth orbit environment and the contamination environment, and variable angle spectroscopic ellipsometry to identify contaminant type and thickness. This paper summarizes the results of pre- and post-flight measurements, identifies the mechanisms responsible for optical properties deterioration, and suggests improvements for the durability of materials in future missions.

Jaworske, Donald A.↗
NASA NTRS1998

Contactless Growth of ZnSe Single Crystals by Physical Vapor Transport

ZnSe crystals were grown by self-seeded physical vapor transport (PVT) technique in the horizontal configuration. The source materials were heat treated by H2 reduction to remove the oxide followed by baking under dynamic vacuum to adjust the source composition toward that of congruent sublimation. Contactless growth of ZnSe single crystals have been performed consistently using three different source materials. The crystals grew away from the wall during the later stage of the growth with large (110) facets tend to align parallel to the gravity direction. The Scanning Electron Micrography (SEM) micrographs and the Atomic Force Microscope (AFM) images showed that large (110) terraces and steps dominate the as-grown facets. The measured residual gas pressures in the processed ampoules agree well among various source materials and the major components were CO and H2. No preferred growth direction was found. The one-dimensional diffusion model on the mass flux of a multi-species PVT system was employed to analyze the conditions for contactless growth. The calculated thermal profile for supersaturation is very close to the thermal profile measured inside the empty furnace bore in the region of contactless growth. The effects of convective flows in the vapor phase inside the ampoule on the growth processes are discussed.

Su, Ching-Hua↗
NASA NTRS2003

Data and Modeling of Dendrites Subject to A Step Change in Pressure (TDSE)

There is considerable interest in dendritic solidification because of the influence dendrites have in the determination of microstructure, and thereby in the physical properties of cast metals and alloys. Current theories and models of dendritic growth generally couple diffusion effects in the melt with the physics of the interface. Data and subsequent analysis prior of the tip growth speed and radii of thermal succinonitrile dendrites in the near-convection free, on-orbit, free-fall environment demonstrate that these theories yield predictions that are reasonably in agreement with the results of experiment. However, data and analysis for assessing the interfacial physics component of theory are not sufficiently detailed or definitive. To study fundamental aspects of dendritic interface stability, we are measuring and modeling the kinetics and morphology of dendrites as they evolve from one well-defined steady state at a pre-set supercooling, through a transient stage, to a different well-defined steady state. More specifically, we subject succinonitrile dendrites, growing under steady-state conditions, to a rapid change in pressure. This leads to a rapid change in thermal driving force from the corresponding change in both the equilibrium melting temperature due to the Clapeyron effect, and a change in the far-field temperature due to adiabatic temperature changes in the bulk liquid and solid. Subsequently, we observe transformations from a well-characterized initial state into a new steady-state. Initial data reveal that the dendrite tip velocity changes almost as fast as the pressure charges, while the tip radius changes occur more slowly, taking from 10 60 seconds depending on the size of the step change and the final supercooling. Computer modeling of this process shows both agreements and disagreements with the experimental data. In making these observations and measurements, we are gaining new understandings of interfacial dynamics and state-selection physics.

Koss, Matthew B.↗
NASA NTRS1998

The Impact of FU Orionis Outbursts and the Solar Nebula

Protostellar systems are variable on many timescales. One of the most dramatic forms of variability known to occur in low mass stellar systems is the FU Orionis outburst (Herbig 1977). Throughout a typical outburst lasting several decades, system luminosities may be a hundred times what is typical of the quiesent state. FU Orionis outburst events are thought to have significant impact on the thermal structure of the protosolar nebula; their existence has been used to explain features in the meteoritic record from thermally induced homogenization to the formation of chondrules. Until recently, the magnitude of the likely effect from such outbursts has been largely speculative due to the lack of a detailed understanding of the outburst mechanism. Recent numerical models (Bell\& Lin 1994) have demonstrated the viability of the observational hypothesis (Hartmann\& Kenyon 1985) that the radiation observed during outburst is emitted by a luminous circumstellar disk transporting mass at a thousand times the quiesent rate. Light curves and color and line width evolution observed in FU Orionis systems are naturally explained by time dependent outbursting model disks (Bell et al. 1995). The radial temperature structure and shape of the disk during outburst derived from these models may be used to calculate the outburst's expected impact on primitive material at various radii throughout the disk. In this review, we will begin by discussing what is known about the FU Orionis outburst phenomenon from recent observations and theory including statistically deduced outburst timescales and observed peak temperatures. Unless covered by another author, we will discuss the evidence which suggests that outburst radiation is emitted by a circumstellar disk rather than by the star and will briefly review the thermal instability as a mechanism for outburst. We will then report on recent work which investigates the likely heating of solar nebula material due to FU Orionis outbursts including the following effects: (1) heating of the planet forming region by direct radiation from the hot inner nebula; (2) heating by the diffuse radiation field of a coccooning envelope; and (3) time-dependent penetration of the increased luminosity from the above sources into the optically thick nebula. Some of this work is currently in progress. The potential effects on condensation and migration in the nebula and the thermal processing of solids will be evaluated.

Bell, Robbins↗
NASA NTRS2014

Microstructure and Macrosegregation Study of Directionally Solidified Al-7Si Samples Processed Terrestrially and Aboard the International Space Station

This talk reports research that has been carried out under the aegis of NASA as part of a collaboration between ESA and NASA for solidification experiments on the International Space Station (ISS). The focus has been on the effect of convection on the microstructural evolution and macrosegregation in hypoeutectic Al‐Si alloys during directional solidification (DS). The DS‐experiments have been carried out under 1‐g at Cleveland State University (CSU) and under low‐g on the International Space Station (ISS). The thermal processing‐history of the experiments is well defined for both the terrestrially‐processed samples and the ISS‐processed samples. We have observed that the primary dendrite arm spacings of two samples grown in the low‐g environment of the ISS show good agreement with a dendrite‐growth model based on diffusion controlled growth. The gravity‐driven convection (i.e., thermosolutal convection) in terrestrially grown samples has the effect of decreasing the primary dendrite arm spacings and causes macrosgregation. In order to process DS‐samples aboard the ISS, dendritic‐seed crystals have to partially remelted in a stationary thermal gradient before the DS is carried out. Microstructural changes and macrosegregation effects during this period are described.

Angart, Samuel↗
NASA NTRS1984

Analytic modeling of a spray diffusion flame

A detailed model for a spray diffusion flame is described. The model is based on the boundary layer form of the equations of motion, with droplet transport accounted for using a discretized droplet size distribution function. Interphase transport of mass and energy are accounted for, with a flame-sheet model used to describe the combustion process on a droplet scale. Near dynamic equilibrium is assumed for the description of droplet transport; droplets can diffuse relative to the gas phase. Gas-phase mixing is accounted for using a two-equation turbulence model; buoyancy effects are included, with a temperature fluctuation equation used to account for buoyancy effects on turbulence structure. Thermal radiation from gas-phase CO2 and H2O is included. Gas-phase chemical kinetics are modeled using a 20-reaction, 10-species version of the advanced quasi-global chemical kinetics formulation. Results are compared with data for a vaporizing Freon spray and a pentane spray flame. It is shown that the computational approach provides a reasonably valid picture of the overall development of a spray diffusion flame, and, furthermore, provides a useful tool for the parametric examination of the spray combustion process.

Harsha, P. T.↗
NASA NTRS2020

Chemical and Thermodynamic Constraints on the Thermal Evolution of Eucrites

Vesta is the only differentiated asteroid with a nearly intact crust, making it the candidate for studying early planetary differentiation. It is commonly thought that the howardite, eucrite, and diogenite (HED) clan of meteorites derive from Vesta, and thus the study of HEDs is important for understanding the evolution of primitive bodies in the early solar system [1]. Of particular interest are the unusual trace element abundances in Stannern group eucrites, which have been interpreted as partial melting and melt contamination events that occurred on the parent body during thermal metamorphism[2]. However, some samples that contain evidence of high temperature metamorphism, such as Elephant Moraine (EET) 90020, have anomalous REE patterns that have been interpret-ed multiple ways. For example [3] concluded that the loss of small degrees of partial melt depleted the sample in LREEs while [4] concluded that subsolidus diffusion better explained why depletion of only some highly incompatible elements is observed. The heterogeneous nature of this sample makes reconstructing its petrologic history challenging. Here, we conduct further petrographic and chemical studies on polished thin sections of EET 90020 and compare results to previous studies [3-5]. Additionally, we combine chemical analyses with thermodynamic models in order to refine the constraints on the post-crystallization thermal history of EET 90020. We additionally include studies of Graves Nunataks (GRA) 98098, which also contains evidence of high temperature metamorphism and anomalous geochemical signatures, as well as evidence of solid state diffusion at lower temperatures [6].

Gorce, Jennifer S.↗
NASA NTRS1988

Unresolved velocity structure in diffuse interstellar clouds

Recent high-resolution observations of interstellar absorption lines of CH and CN toward Zeta Oph obtained by Crane et al. (1986), and Palazzi et al. (1988), exhibit line widths that suggest thermal line broadening at high temperature, T about 1200 K. Observations of CO line emission at 2.6 mm toward Zeta Oph (Langer et al.,1987) indicate that the molecular gas resides in four distinct velocity components that span less than 3 km/s in Doppler velocity. Simulated CH and CN absorption line profiles are compared for high-temperature (T = 1200 K) thermal broadening and for a combination of low-temperature (T = 50 K) thermal plus turbulent broadening. It is shown that the two broadening models reproduce existing observations comparably well and are virtually indistinguishable at a lambda/Delta-lambda ratio of about 100,000. The observed differences in the CH and CN line widths may reflect slightly different distributions of those molecules along the line of sight. The simulations use very recent, improved laboratory spectroscopic data on CH (Bernath). Some related consequences of such unresolved velocity structure on the ultraviolet absorption lines of CO are examined. Indirect diagnostics of temperature in the Zeta Oph cloud favor low-temperature thermal plus turbulent broadening, and the implied rate of dissipation of turbulence is in harmony with estimates of the global input of mechanical energy into to interstellar medium.

Black, John H.↗
NASA NTRS1990

Thermal plasma in outer planet magnetospheres

The plasma environments of the outer planets are a study in contrasts. The magnetosphere of Jupiter is dominated by the prodigious plasma output of Io, with losses due to diffusion driven by mass loading. At Saturn, the small icy satellites are the major sources of plasma for the inner magnetosphere. The low mass loading rates there imply that the densities of the plasma tori are limited by dissociative recombination, rather than diffusive transport. At Uranus, the icy satellites are negligible plasma sources compared to the input from the extended neutral hydrogen cloud and the ionosphere. Convection driven by the solar wind penetrates deep into the inner magnetosphere because of the unique orientation of the rotation axis of Uranus. The expected magnetosphere of Neptune is similar to that of Saturn and Jupiter, with Triton, the ring arcs, and the planet as possible plasma sources. The Voyager 2 encounter with Neptune holds out the hope of a passage through a nonterrestrial auroral region, a unique event in planetary exploration.

Belcher, J. W.↗