Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “technical analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Physical solvents and techno-economic analysis for pre-combustion CO 2 capture: A review

In this manuscript we review the use, development, and economic performance of physical solvents for pre-combustion CO 2 capture from high pressure H 2 rich syngas streams. Commercially available physical solvents are presented, followed by an assessment of the ideal properties that are important for development of novel solvents for CO 2 capture from high-pressure syngas streams. To compare the technical and economic performance of traditional and novel physical solvents, a review of the methods, assumptions and models used in techno-economic analysis (TEA) studies was conducted. It was found that, although some novel solvents show promising technical performance in the laboratory (e.g., high CO 2 absorption capacity and low vapor pressure), other issues (e.g., solvent viscosity and cost) may limit their industrial applications. Process simulations were useful tools for modeling the technical performance of processes using traditional and novel solvents. However, model predictions are most reliable when the methods and correlations used to develop the process simulation are validated with representative experimental data, in particular highly accurate baseline models are required for fair comparison among physical solvents. The key inputs and assumptions in pre-combustion CO 2 capture TEAs have also been summarized. Some studies showed that the promising technical performance of novel physical solvents can be offset by the high and often unknown costs of these solvents. Future development of novel physical solvents for pre-combustion CO 2 capture will benefit from more studies that conduct in-depth techno-economic analysis, specifically with validated process simulations and transparent economic models.

42 ENGINEERING↗

Kauai, Hawaii: Solar Resource Analysis and High Penetration PV Potential

Overview of the solar resource assessment conducted by the National Renewable Energy Laboratory (NREL) in cooperation with Kauai Island Utility Cooperative (KIUC) in Hawaii to determine the technical feasibility of increasing the contribution of solar renewable energy generation on the island of Kauaii through the use of photovoltaic (PV) arrays. The analysis, which was performed using a customversion of NREL's In My Back Yard (IMBY) software tool, showed that there is potential to generate enough energy to cover the peak load as reported for Kauai in 2007.

14 SOLAR ENERGY↗

Technical Requirements for Geothermal Resource Confirmation

In 2017-2018, the Bureau of Land Management's Renewable Energy Coordination Office, through its Geothermal Program, funded the National Renewable Energy Laboratory (NREL) to analyze technical and environmental considerations related to geothermal resource confirmation drilling. NREL solicited input from a group of technical and environmental experts in the geothermal industry, along with analyzing National Environmental Policy Act of 1969 (NEPA) documentation for previously approved projects. The collected data and analysis will be used by the Bureau of Land Management to examine the possibility of developing a new classification of wells and/or expediting the NEPA compliance process, which could potentially reduce permitting and regulatory compliance timelines when compared to the current process for obtaining a geothermal drilling permit for resource confirmation drilling activities. This paper provides a summary of the technical requirements for confirming a geothermal resource. The analysis showed that confirming a geothermal resource requires confirming reservoir temperature, chemistry, permeability, and flow rate. Obtaining these data requires drilling at least two-preferably three-successful wells into the resource to conduct the necessary tests, including an interference test. Bottom-hole well diameters of at least 6'' to 8'' (0.15 to 0.2 m) are needed to limit the wellbore frictional pressure drop to effectively perform well flow and interference tests. Drilling these wells requires a drill rig with a mud pump and derrick capable of holding three drill pipes. This type of rig requires a minimum well-pad size of 2.5 acres (104 m2) including surface area for a 1 million-gallon (3.8 million-liter) pit. Up to 15 acres (5x104 m2) of total surface disturbance are needed for developing access roads and well pads to drill a total of three to five wells.

15 GEOTHERMAL ENERGY↗

A Summary of Coupled, Uncoupled, and Hybrid Tectonic Models for the Yakima Fold Belt

This document is one in a series of topical reports compiled by the Pacific Northwest National Laboratory to summarize technical information on selected topics important to the performance of a probabilistic seismic hazard analysis of the Hanford Site. The purpose of this report is to summarize the range of opinions and supporting information expressed by the expert community regarding whether a coupled or uncoupled model, or a combination of both, best represents structures in the Yakima Fold Belt. This issue was assessed to have a high level of contention with up to moderate potential for impact on the hazard estimate. This report defines the alternative conceptual models relevant to this technical issue and the arguments and data that support those models. It provides a brief description of the technical issue and principal uncertainties; a general overview on the nature of the technical issue, along with alternative conceptual models, supporting arguments and information, and uncertainties; and finally, suggests some possible approaches for reducing uncertainties regarding this issue.

Chamness, Michele A.↗

REopt/Microgrid Analysis (CRADA Final Report)

NREL is the only DOE national laboratory solely dedicated to advancing energy efficiency (EE) and renewable energy (RE) technologies and applications. Since its inception, NREL has supported both the public and the private sectors in implementing EE and RE systems and strategies to lower energy use and to meet remaining energy needs with resources having minimal environmental impact. NREL is now a sought-after resource for EE, RE, and energy systems integration expertise. CU Boulder is a public university located in Boulder, Colorado, with over 30,000 students. CU is committed to environmental sustainability and is interested in partnering with NREL to explore opportunities for RE on campus and evaluate an RE microgrid. The goal of this project is to assess the technical and economic potential for RE generation at CU and evaluate how RE may be incorporated as part of a microgrid to increase energy resiliency on campus.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Biomass Electrochemical Reactor for Upgrading Biorefinery Waste to Industrial Chemicals and Hydrogen

The goal of this project was to develop an electrochemical process for depolymerization of biorefinery lignin to industrial chemicals, most notably as replacements in resins. The project team consisted of Ohio University (lead organization), Hexion, Inc. and Lakehead University. There were six distinct project tasks, consisting of Initial Validation, Development of TiO 2 Nanowire-supported Ni-Co Electrocatalysts, Electrochemical Characterization of TiO 2 Nanowire-supported Ni-Co Electrocatalysts, Development of Electrochemical Flow Reactor for Production of Industrial Chemicals and Hydrogen, Product Formulations and Integrated Biorefinery Analysis. The project was divided into two budget periods. After intermediate validation near the end of Budget Period 1, the project was discontinued. This final report is intended to highlight major project objectives and results. Technical metrics were developed between the project team and the DOE validation team during the initial validation period. Critical technical metrics included conversion of lignin to products and product selectivity. Desired products were low molecular weight aromatic compounds in the 150-300 MW range. We targeted this class of compounds because of their potential to replace petroleum derivatives in resin formulations. Electrochemical oxidation of biorefinery lignin can lead to significant lignin depolymerization and conversion, with >40% of the lignin reacted. However, product stream analysis is extremely difficult. We were not able to adequately quantify the concentration of the primary oxidation products, or to determine with any degree of certainty what the product selectivity was. The project team initially proposed analytical techniques such as GC-MS to identify product distributions. However, due to 1) difficulty in extracting products into an organic phase suitable for GC analysis and 2) the wide range of product compounds with similar structures, GC-MS analysis was difficult to perform. The project team did have some success with NMR spectroscopic analysis, but not enough so to adequately identify product selectivity. By UV-vis spectroscopy and statistical analysis, we were able to confirm achieving the technical milestone for lignin conversion, and achieved at least 40% conversion by the electrochemical oxidation technique. However, we were not able to confirm product selectivity using GC-MS analysis, as originally postulated. Despite these difficulties, we were able to incorporate the product stream into a resin, and observed better resin synthesis behavior using the oxidized lignin versus the unoxidized lignin. However, no resin synthesized with oxidized biorefinery lignin met the commercial standards for resin quality. One potential problem with electrochemical oxidation of biomass is the competing oxygen evolution reaction (OER) at the reactor anode. We observed that, especially at higher anode potentials, the OER can consume up to 50% of the energy input to the system, meaning that much of the energy goes toward generation of an essentially worthless product (O 2 ). However, we also observed that the OER can be avoided almost entirely at lower potentials. These uncertainties made assigning a value to the electrochemical reactor product stream difficult. Any product generated electrochemically would have to be valuable enough to offset the additional cost of electricity incurred, including electricity to run the electrochemical reactor and the additional electricity that must be purchased because some of the lignin (which is currently burned in biorefineries to recover energy) is diverted to the electrochemical reactor. It is not clear at this time whether the product stream has sufficient economic value to offset these additional electricity costs. The two most promising areas for this project in terms of demonstrating economic feasibility are product stream analysis and resin synthesis. In particular, product stream analysis has proven to be difficult. With additional time, we would refine analytical techniques to better understand key product stream characteristics, such as aromatic compound content. Evaluating the product streams in resin synthesis would likely provide more information on the economic value of the product stream. If we could determine that value, then we would be able to better evaluate whether the electrochemical conversion approach is feasible. The details of this work are presented in the following final report. The report is organized into individual tasks for clarity, although all tasks were integrated and many occurred simultaneously.

09 BIOMASS FUELS↗

Ultrasound-Guided Radiological Placement of Central Venous Port via the Subclavian Vein: A Retrospective Analysis of 500 Cases at a Single Institute

The purpose of this study was to assess the technical success rate and adverse events (AEs) associated with ultrasound (US)-guided radiological placement (RP) of a central venous port (CVP) via the subclavian vein (SCV). Between April 2006 and May 2007, a total of 500 US-guided RPs of a CVP via the SCV were scheduled in 486 cancer patients (mean age {+-} SD, 54.1 {+-} 18.1 years) at our institute. Referring to the interventional radiology report database and patients' records, technical success rate and AEs relevant to CVP placement were evaluated retrospectively. The technical success rate was 98.6% (493/500). AEs occurred in 26 cases (5.2%) during follow-up (range, 1-1080 days; mean {+-} SD, 304.0 {+-} 292.1 days). AEs within 24 h postprocedure occurred in five patients: pneumothorax (n = 2), arterial puncture (n = 1), hematoma formation at the pocket site (n = 2), and catheter tip migration into the internal mammary vein (n = 1). There were seven early AEs: hematoma formation at the pocket site (n = 2), fibrin sheath formation around the indwelling catheter (n = 2), and catheter-related infections (n = 3). There were 13 delayed AEs: catheter-related infections (n = 7), catheter detachments (n = 3), catheter occlusion (n = 1), symptomatic thrombus in the SCV (n = 1), and catheter migration (n = 1). No major AEs, such as procedure-related death, air embolism, or events requiring surgical intervention, were observed. In conclusion, US-guided RP of a CVP via the SCV is highly appropriate, based on its high technical success rate and the limited number of AEs.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Iodine Speciation Basis and Gap Analysis for Hanford Tank Farm Inventory and during Processing

Pacific Northwest National Laboratory (PNNL) is providing baseline technical support to Washington River Protection Solutions (WRPS) for the One System River Protection Project (RPP) Integrated Flowsheet team. This report documents the evaluation of the technical bases available to support iodine speciation and distribution within Hanford wastes and subsequent waste streams generated during direct feed low-activity waste (DFLAW) pretreatment operations (specifically, waste retrievals and staging, and particle filtration and cesium decontamination using crystalline silicotitanate (CST) ion exchange [in the tank side cesium removal (TSCR) system]. The task performed a literature survey of information related to iodine species in environments analogous to Hanford tank waste and the subsequent waste streams to define a technical basis for the possible iodine speciation in Hanford waste. In doing so it can be determined how likely laboratory studies on iodine speciation in tank waste are to be universally relevant across the Hanford tanks. The task evaluated iodide and iodate as the primary species of interest with a focus on organo-iodine where appropriate.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Crossing the Barriers: An Analysis of Market Barriers to Geothermal Development and Potential Improvement Scenarios

Developers have identified many non-technical barriers to geothermal power development, including market barriers. Understanding the challenges to market deployment of geothermal power is important since obtaining power purchase agreements is often cited as one of the largest barriers to geothermal development. This paper discusses the impacts to deployment caused by market challenges, including market demand, price of electricity, policies and incentives.

15 GEOTHERMAL ENERGY↗

Best Practice for the Commercial Deployment of Carbon Dioxide Geologic Storage: Adaptive Management Approach

The Plains CO 2 Reduction (PCOR) Partnership is one of seven regional partnerships formed as part of the U.S. Department of Energy’s National Energy Technology Laboratory Regional Carbon Sequestration Partnerships (RCSP) Initiative. The RCSP Initiative is focused on the safe and long-term storage of CO 2 to support the commercial deployment of carbon capture and storage (CCS). To that end, the PCOR Partnership has spent over 10 years developing, testing, and validating the best methods and technologies to conduct the geologic storage of CO 2 (hereafter referred to as CO 2 storage). Through this effort, the PCOR Partnership has formalized an adaptive management approach (AMA) for the commercial development of CO 2 storage projects. The use of this approach, which draws upon the collective experience and lessons learned from the PCOR Partnership, represents best practice for advancing CO 2 storage projects toward commercial deployment. At the heart of the AMA are four technical elements necessary for any successful CO 2 storage project: 1) site characterization; 2) modeling and simulation; 3) risk assessment; and 4) monitoring, verification, and accounting (MVA). Each of these elements plays a key role in gathering and assessing site-specific data that provide a fundamental understanding of the storage complex and its performance. While each of the four technical elements can provide useful data independently, integrating them through the AMA yields a streamlined, fit-for-purpose strategy for the commercial deployment of CO 2 storage. Key to this integration and resulting best practice are feedback loops that allow the results of each element to serve as inputs to the others. Each iteration of the AMA creates an improved understanding of the storage complex and thus more targeted and efficient applications of the technical elements. For the purpose of establishing an adaptive management framework, hard lines have been drawn between the technical elements of the AMA. However, in practice, the rapid and seamless interaction between the elements can blur these lines. For example, to aid in the analysis and interpretation of site characterization data, a static geocellular model is often required. While this model development is part of the technical element, modeling and simulation, it is an integral part of the site characterization effort. Likewise, much of the monitoring data collected as part of the MVA technical element can be used to inform site characterization. This back-and-forth flow of data and use of models between the technical elements continues throughout the project.

54 ENVIRONMENTAL SCIENCES↗

Nuclear Safety [Vol. 34, No. 1, January-March 1993]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 1 An Integrated Regional Approach To Risk Management of Industrial Systems, S. Chakraborty and R. Stratton; 9 Annual Technical Meeting of the NRC Cooperative Severe Accident Research Program, E. G. Silver; ACCIDENT ANALYSIS: 13 Deterministic Severe Accident Criteria as Severe Accident Design Criteria and Policy for the New Production Reactor-Heavy Water Reactor, P. T. Rhoads; 20 Proposed Deterministic Severe Accident Criteria for the Heavy Water Reactor-New Production Reactor Containment, K. D. Bergeron, S. E. Slezak, and C. E. Leach; 33 Quasi-Static Core Liquid Level Depression and Long-Term Core Uncovery During a PWR LOCA, Y. Kukita, R. R. Schultz, H. Nakamura, and J. Katayama; 49 LIRA: An Advanced Containment System to Minimize the Accidental Radioactivity Releases, A. Turricchia; 63 Errata to “A Review of Hydrogen Production During Melt/Water Interaction in LWRs,” Vol. 33, No. 4; CONTROL AND INSTRUMENTATION: 64 The Nuplex 80+™ Advanced Control Complex from ABB Combustion Engineering, F. Ridolfo, D. Harmon, and K. Scarola; DESIGN FEATURES: 76 A Scheme for Passive Isolation of the Containment of a Reactor, A. K. Ghosh, V. V. Raj, and K. Kakodkar; 84 Utility Requirements for Safety in the Passive Advanced Light-Water Reactor, T. U. Marston, W. H. Layman, and G. Bockhold, Jr.; WASTE AND SPENT FUEL MANAGEMENT: 91 Activities Related to Waste and Spent Fuel Management, Compiled by M. D. Muhlheim and E. G. Silver; OPERATING EXPERIENCES: 103 Testing Deficiencies in Auxiliary Systems Feedwater Systems, J. D. Kueck; 110 Reactor Shutdown Experience, Compiled by J. W. Cletcher; 113 Selected Safety-Related Events, Compiled by G. A. Murphy; 115 Operating U.S. Power Reactors, Compiled by M. D. Muhlheim and E. G. Silver; RECENT DEVELOPMENTS: 133 General Administrative Activities, Compiled by M. D. Muhlheim and E. G. Silver; 145 Reports, Standards, and Safety Guides, D. S. Queener; 150 Proposed Rule Changes as of Sept. 30, 1992; ANNOUNCEMENTS: 75 Harvard Short Course on Risk: Science, Assessment, and Management; 102 International Conference on Reactor Physics and Reactor Computations; 102 The Fourth International Conference on Nuclear Waste Reprocessing and Waste Management [RECOD ’94]; 132 International Symposium on the Radiological Exposure of the Population of the European Community from Radioactivity in the Mediterranean Sea [MARINA-MED]; 162 International High-Level Radioactive Waste Conference ‘Technology Integration—Above and Below”; 154 The Authors; 158 Indexes to Nuclear Safety, Volume 33.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Salt Processing Through Ion Exchange at the Savannah River Site Selection of Exchange Media and Column Configuration - 9198

The Department of Energy (DOE) has developed, modeled, and tested several different ion exchange media and column designs for cesium removal. One elutable resin and one non-elutable resin were considered for this salt processing application. Deployment of non-elutable Crystalline Silicotitanate and elutable Resorcinol Formaldehyde in several different column configurations were assessed in a formal Systems Engineering Evaluation (SEE). Salt solutions were selected that would allow a grouping of non-compliant tanks to be closed. Tests were run with the elutable resin to determine compatibility with the resin configuration required for an in-tank ion exchange system. Models were run to estimate the ion exchange cycles required with the two resins in several column configurations. Material balance calculations were performed to estimate the impact on the High Level Waste (HLW) system at the Savannah River Site (SRS). Conceptual process diagrams were used to support the hazard analysis. Data from the hazard analysis was used to determine the relative impact on safety. This report will discuss the technical inputs, SEE methods, results and path forward to complete the technical maturation of ion exchange.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Housing Characteristics and Energy Burden Analysis for Highland Park, Michigan

Through the Communities LEAP (Local Energy Action Program) Pilot, the National Renewable Energy Laboratory (NREL) engaged the Highland Park Stakeholder Coalition to scope four technical assistance work areas to address their energy needs and goals. This slide deck addresses the highlighted tasks under work area "C", related to Housing Characteristics and Energy Burden Analysis. Assessed residential building energy consumption across different building envelope and electrification upgrades to see potential savings in energy consumption, emissions, energy bills, and energy burden.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A successful start for mLife

mLife made its debut with the publication of the inaugurating issue on March 30, 2022. We are pleased to have published 42 high-quality articles, including reviews, research articles, and application notes, which cover microbial genetics, biochemistry and physiology, ecology and evolution, pathogenic and public health microbiology, and so forth. Nine of the articles concern technical innovations and applications in areas including genome editing, single-cell analysis, and database. To pay tribute to the great microbiologist Carl Woese on the 10th anniversary of his death, the Journal published a special section containing three thought-provoking articles in the last issue of the year. mLife and its collaborating publisher Wiley have made great efforts to increase the Journal's national and continental representation. As a result, the Journal received submissions from over 20 countries in five continents last year. The authors of the published articles are from China, United States, Great Britain, France, Canada, Ger many, Japan, Switzerland, and Austria.

59 BASIC BIOLOGICAL SCIENCES↗

Neurointerventional Treatment in Acute Stroke. Whom to Treat? (Endovascular Treatment for Acute Stroke: Utility of THRIVE Score and HIAT Score for Patient Selection)

Purpose: Intra-arterial therapy (IAT) is used increasingly as a treatment option for acute stroke caused by central large vessel occlusions. Despite high rates of recanalization, the clinical outcome is highly variable. The authors evaluated the Houston IAT (HIAT) and the totaled health risks in vascular events (THRIVE) score, two predicting scores designed to identify patients likely to benefit from IAT. Methods: Fifty-two patients treated at the Stavanger University Hospital with IAT from May 2009 to June 2012 were included in this study. We combined the scores in an additional analysis. We also performed an additional analysis according to high age and evaluated the scores in respect of technical efficacy. Results: Fifty-two patients were evaluated by the THRIVE score and 51 by the HIAT score. We found a strong correlation between the level of predicted risk and the actual clinical outcome (THRIVE p = 0.002, HIAT p = 0.003). The correlations were limited to patients successfully recanalized and to patients <80 years. By combining the scores additional 14.3 % of the patients could be identified as poor candidates for IAT. Both scores were insufficient to identify patients with a good clinical outcome. Conclusions: Both scores showed a strong correlation to poor clinical outcome in patients <80 years. The specificity of the scores could be enhanced by combining them. Both scores were insufficient to identify patients with a good clinical outcome and showed no association to clinical outcome in patients aged {>=}80 years.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

2PI functional techniques for gauge theories: QED

We discuss the formulation of the prototype gauge field theory, QED, in the context of two-particle-irreducible (2PI) functional techniques with particular emphasis on the issues of renormalization and gauge symmetry. We show how to renormalize all n-point vertex functions of the (gauge-fixed) theory at any approximation order in the 2PI loop-expansion by properly adjusting a finite set of local counterterms consistent with the underlying gauge symmetry. The paper is divided in three parts: a self-contained presentation of the main results and their possible implementation for practical applications; a detailed analysis of ultraviolet divergences and their removal; a number of appendices collecting technical details.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Universal Nuclear Accident Dosimeter

The Lawrence Livermore National Laboratory (LLNL) Universal Nuclear Accident Dosimetry (UNAD) project is a four-year initiative aimed at advancing nuclear accident dosimetry methods. This article presents an overview of the research, key findings, and the progress made throughout the project. The primary goals included a background into the history of nuclear accident dosimetry, consolidating current dosimetry techniques within the NNSA/DOE complex, fostering collaboration among subject matter experts, and exploring novel technologies for potential implementation. The technical focus centered on investigating new and novel technologies, instrumentation methods, and analysis methods to develop recommendations for a potential nuclear accident dosimeter (NAD) to be universally deployed through the DOE complex. A multilaboratory and multinational Usergroup was established, conducting periodic meetings to facilitate knowledge exchange. The UNAD team has participated in two international nuclear accident dosimetry intercomparison exercises and one characterization exercise, where the existing LLNL NAD and a prototype alanine electron paramagnetic dosimeter NAD were deployed. Ongoing improvements are being made to the prototype NAD based on results from the exercises, laboratory studies, and collaboration with other laboratories. A machine learning algorithm to optimize the geometry and conversion factors of the current LLNL NAD is being implemented, and the resulting design will be tested in the next exercise. In conclusion, key lessons learned and future directions for the project are discussed.

Electron paramagnetic resonance spectroscopy↗