Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “system model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Thermophotovoltaic System Parametric Modeling

A small radioisotope powered TPV system was assumed. The system was simplified into a one-dimensional model with the emitter and heat rejection system as boundaries. Design equations were then developed which would allow parametric modeling of system efficiency, emitter radiation incident upon the TPV cell, energy converted in the TPV cell, and energy absorbed in the filter and cell-to-cell gaps. A figure of merit was then developed for the emitter, filter, and TPV cell.

thermophotovoltaic radioisotope TPV cells energy c↗
NASA NTRS2007

Hypersonic Vehicle Propulsion System Simplified Model Development

This document addresses the modeling task plan for the hypersonic GN&C GRC team members. The overall propulsion system modeling task plan is a multi-step process and the task plan identified in this document addresses the first steps (short term modeling goals). The procedures and tools produced from this effort will be useful for creating simplified dynamic models applicable to a hypersonic vehicle propulsion system. The document continues with the GRC short term modeling goal. Next, a general description of the desired simplified model is presented along with simulations that are available to varying degrees. The simulations may be available in electronic form (FORTRAN, CFD, MatLab,...) or in paper form in published documents. Finally, roadmaps outlining possible avenues towards realizing simplified model are presented.

Stueber, Thomas J.↗
DOE OSTI2022

Data used for Figure 3 of the Nature Reviews Earth and Environment (NREE) paper: "A low-to-no snow future and its impacts on water resources in the western United States

In order to synthesize western United States snowpack projections, this dataset contains the results of 18 peer-review journal articles over three periods of interest (2025-2049, 2050-2074, and 2075-2099) and over 4 mountain ranges (Cascades, Sierra Nevada, Rockies, Wasatch/Uinta) in addition to western-US wide projections. Distinction is made by model type (Earth System Models, bias-corrected statistically downscaled Earth System Models, and regional climate models). RCP4.5 and RCP8.5 emission scenarios are considered. Percent snow water equivalent (SWE) loss considers 1 April, peak SWE and/or seasonal SWE. Heterogeneity in projected snowpack changes exists across mountain ranges and for different modeling approaches, but generally indicate agreement in decreases by the end of the century.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The Impact of Crop Rotation and Spatially Varying Crop Parameters in the E3SM Land Model (ELMv2)

Abstract Earth System Models (ESMs) are increasingly representing agriculture due to its impact on biogeochemical cycles, local and regional climate, and fundamental importance for human society. Realistic large scale simulations may require spatially varying crop parameters that capture crop growth at various scales and among different cultivars, as well as common crop management practices, but their importance is uncertain, and they are often not represented in ESMs. In this study, we examine the impact of using constant versus spatially varying crop parameters using a novel, realistic crop rotation scenario in the Energy Exascale Earth System Model (E3SM) Land Model version 2 (ELMv2). We implemented crop rotation by using ELMv2's dynamic land unit capability, and then calibrated and validated the model against observations collected at three AmeriFlux sites in the US Midwest with corn soybean rotation. The calibrated model closely captured the magnitude and observed seasonality of carbon and energy fluxes across crops and sites. We performed regional simulations for the US Midwest using the calibrated model and found that spatially varying only a few crop parameters across the region, as opposed to using constant parameters, had a large impact, with the carbon fluxes and energy fluxes both varying by up to 40%. These results imply that large scale ESM simulations using spatially invariant crop parameters may result in biased energy and carbon fluxes estimation from agricultural land, and underline the importance of improving human‐earth systems interactions in ESMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

The Numerical Computation of Clear-Sky Transmittance and Reflectance of Solar Radiation for the Modeling of PV System Performance

Modeling of photovoltaics (PV) system performance requires numerical computation of plane-of-array (POA) irradiances that are influenced by atmospheric absorption and scattering. Clear-sky transmittance and reflectance of diffuse irradiance are essential for the understanding of solar radiation related to multiple reflection between land surface and clouds. This study analytically solves the radiative transfer equation for clear-sky conditions and numerically computes the transmittance and reflectance of diffuse irradiance as functions of the optical thickness of the atmosphere. The computation will be implemented in all-sky radiative transfer models to improve their computational efficiency.

14 SOLAR ENERGY↗
NASA NTRS2007

Model-Based Systems

Engineers, who design systems using text specification documents, focus their work upon the completed system to meet Performance, time and budget goals. Consistency and integrity is difficult to maintain within text documents for a single complex system and more difficult to maintain as several systems are combined into higher-level systems, are maintained over decades, and evolve technically and in performance through updates. This system design approach frequently results in major changes during the system integration and test phase, and in time and budget overruns. Engineers who build system specification documents within a model-based systems environment go a step further and aggregate all of the data. They interrelate all of the data to insure consistency and integrity. After the model is constructed, the various system specification documents are prepared, all from the same database. The consistency and integrity of the model is assured, therefore the consistency and integrity of the various specification documents is insured. This article attempts to define model-based systems relative to such an environment. The intent is to expose the complexity of the enabling problem by outlining what is needed, why it is needed and how needs are being addressed by international standards writing teams.

Frisch, Harold P.↗
NASA NTRS1983

Model deformation system

The development of a system to measure model deflections encountered in the National Transonic Facility is discussed. The goal is to be able to measure peak deflections of up to 3 in. with accuracies to within 0.0025 in. over an area 1 m square as the model pitches through an included angle of 30 deg. Stereophotogrammetric techniques are being implemented, with the initial system being an extension of standard techniques. A second system, which will be all electronic, is under development. Both techniques require targets to be strategically placed on the model. Active targets are being developed for location in the model in order to maximize the signal-to-noise ratio and to approximate a point source. Image processing techniques and stereophotogrammetric data reduction programs are being implemented to perform the data reduction tasks.

Holmes, H. K.↗
DOE OSTI2024

Integrating NDVI-Based Within-Wetland Vegetation Classification in a Land Surface Model Improves Methane Emission Estimations

Earth system models (ESMs) are a common tool for estimating local and global greenhouse gas emissions under current and projected future conditions. Efforts are underway to expand the representation of wetlands in the Energy Exascale Earth System Model (E3SM) Land Model (ELM) by resolving the simultaneous contributions to greenhouse gas fluxes from multiple, different, sub-grid-scale patch-types, representing different eco-hydrological patches within a wetland. However, for this effort to be effective, it should be coupled with the detection and mapping of within-wetland eco-hydrological patches in real-world wetlands, providing models with corresponding information about vegetation cover. In this short communication, we describe the application of a recently developed NDVI-based method for within-wetland vegetation classification on a coastal wetland in Louisiana and the use of the resulting yearly vegetation cover as input for ELM simulations. Processed Harmonized Landsat and Sentinel-2 (HLS) datasets were used to drive the sub-grid composition of simulated wetland vegetation each year, thus tracking the spatial heterogeneity of wetlands at sufficient spatial and temporal resolutions and providing necessary input for improving the estimation of methane emissions from wetlands. Our results show that including NDVI-based classification in an ELM reduced the uncertainty in predicted methane flux by decreasing the model’s RMSE when compared to Eddy Covariance measurements, while a minimal bias was introduced due to the resampling technique involved in processing HLS data. Our study shows promising results in integrating the remote sensing-based classification of within-wetland vegetation cover into earth system models, while improving their performances toward more accurate predictions of important greenhouse gas emissions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1989

Analysis of vibrations of the National Transonic Facility model support system using a 3-D aeroelastic code

Vibrations of the National Transonic Facility model support system were analyzed using Computational Aeroelasticity Program-Transonic Small Disturbance, a three-dimensional transonic small disturbance code designed for aeroelastic analysis of complete aircraft. The model support system was represented as a tunnel-spanning flexible wing whose structural properties were obtained from measured responses. Aeroelastic transients were calculated and analyzed to obtain modal stability characteristics. The results show that there is tendency to exhibit a hump mode instability in one of the modes, and that there are other weakly damped or unstable modes. Most of the motion is in the aft section of the model support system. The close proximity of the solid wind-tunnel diffuser side walls to the model support system is shown to have adverse effects on its aeroelastic stability characteristics. When the effects of the wind-tunnel walls are modeled, the analyses indicate the presence of wind-tunnel resonance modes which are not present when free-air boundary conditions are used.

Whitlow, Woodrow, Jr.↗
DOE OSTI2020

SAM™ (System Advisor Model™) [SWR-16-02, SWR-10-13]

See the SAM™ website to build a desktop version of the National Laboratory of the Rockies' (NLR's) System Advisor Model™ (SAM). https://sam.nlr.gov/ The System Advisor Model™ (SAM™) is a free techno-economic software model that facilitates decision-making for people in the renewable energy industry: -Project managers and engineers -Policy analysts -Technology developers -Researchers SAM can model many types of renewable energy systems: -Photovoltaic systems, from small residential rooftop to large utility-scale systems -Battery storage with Lithium ion, lead acid, or flow batteries for front-of-meter or behind-the-meter applications -Concentrating Solar Power systems for electric power generation, including parabolic trough, power tower, and linear Fresnel -Industrial process heat from parabolic trough and linear Fresnel systems -Wind power, from individual turbines to large wind farms -Marine energy wave and tidal systems -Solar water heating -Fuel cells -Geothermal power generation -Biomass combustion for power generation -High concentration photovoltaic systems SAM's financial models are for the following types of projects: -Residential and commercial projects where the renewable energy system is on the customer side of the electric utility meter (behind the meter), and power from the system is used to reduce the customer's electricity bill. -Power purchase agreement (PPA) projects where the system is connected to the grid at an interconnection point, and the project earns revenue through power sales. The project may be owned and operated by a single owner or by a partnership involving a flip or leaseback arrangement. -Third party ownership where the system is installed on the customer's (host) property and owned by a separate entity (developer), and the host is compensated for power generated by the system through either a PPA or lease agreement. For a more detailed description of SAM, see Blair et al. (2018), System Advisor Model (SAM) General Description (Version 2017.9.5), NREL/TP-6A20-70414. https://www.nrel.gov/docs/fy18osti/70414.pdf

Ryberg, David↗
NASA NTRS1982

A domain segmentation approach to modeling distributed parameter systems

Existing modeling methods in distributed parameter systems are directed to field problems for which a single equation gives an adequate representation. As a result, the techniques are severely taxed when coefficients of the governing partial differential equation (PDE) have relatively complex functional forms. The field is postulated to consist of contiguous regions that are easily modeled. During the modeling process itself, the regional boundaries are identified using a method based on pattern recognition (PR) techniques. The method was tested on computer simulations of a water quality resource system. Quantitative measures are developed and used to demonstrate the feasibility of applying the methodology to realistic distributed parameter systems (DPS's).

Apenyo, K.↗
DOE OSTI2026

NGEE Arctic Integrated Modeling (IM2): Improved subgrid hillslope hydrologic connectivity

This data product represents the integration of new code capability for arctic tundra hillslope hydrologic processes into the Energy Exascale Earth System Model (E3SM), through the E3SM Land Model (ELM) component. This code integration is the result of collaborative effort between the NGEE Arctic project and the E3SM project. The current ELM represents water movement primarily through vertical processes, such as precipitation, canopy interception, evaporation, infiltration, and soil water movement. Lateral water movement—such as surface runoff, subsurface flow, and river transport—plays a significant role in the hydrological cycle, especially in regions with varied topography. While E3SM includes a runoff routing component representing water transport in the river network, the lateral transport of water at the subgrid scale within the land model has previously not been taken into account. With the recent development of topographic units within the ELM subgrid data structure, there is an opportunity to simulate hillslope hydrologic connectivity by introducing water transport along topographic gradients. We expect that more realistic representation of hillslope hydrologic processes will lead to improved predictions of both soil water content and river network flows. Lateral transport of water at and near the surface is represented as a sub-grid process in this new code development. Water is tracked as it moves from higher to lower elevations within a gridcell. This capability uses the nested hierarchical sub-grid scheme within ELM to connect water fluxes from sub-grid elements with higher elevation to those with lower elevation. This data record consists of a single document (pdf format) that describes the theoretical basis for the hillslope hydrology processes added to ELM, and describes the modifications made to the ELM code. The Methods section of this metadata record includes a link to the public E3SM code repository where the exact code modifications as integrated in E3SM can be accessed. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

Thornton, Peter E [ORNL] (ORCID:0000000247595158)↗
DOE OSTI2026

Post-fire soil respiration in late growing season (2023 and 2024), Kougarok Fire Complex, Seward Peninsula, Alaska

Field soil respiration data collected in 2023 and 2024 from burned and unburned tussock tundra sites in the Kougarok Fire Complex, near Nome, on the Seward Peninsula of Alaska. Specifically, we measured soil properties and late-growing season CO2 fluxes in patches of unique plant functional types (forbs, shrubs, and graminoids) across two years in tundra recovering from repeated wildfires over the decade. The goal was to identify the main drivers of soil respiration in Arctic tundra underlain by discontinuous permafrost that is recovering from two recent, repeated wildfires that differed in fire age and number of times burned, thereby resulting in different levels of vegetation and subsurface property changes (i.e., successional trajectories). There are five files in *.csv format with one data file and four data description files including data, dictionary, methods, terminology, and file-level metadata. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), is a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic Phase 3 project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

Santos, Fernanda [ORNL] (ORCID:0000000191555623)↗