Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Influence of substitution pattern on the dynamics of internal conversion and intersystem crossing in thiopyridone isomers

We report a combined experimental and theoretical investigation of the ultrafast internal conversion (IC) and intersystem crossing (ISC) dynamics of two thiopyridone (TP) isomers in solution. Our study used ultrafast transient X-ray absorption spectroscopy (XAS) at the sulfur K-edge, in conjunction with electronic excited state surface hopping molecular dynamics and simulations of the excited state XAS, to investigate the impact of the functional group substitution pattern and solvent on the dynamics of IC and ISC. The combination of the localized X-ray probe and the simulation results enables, in part, the differentiation between ππ* and nπ* character excited states, as well as singlet and triplet states. Access to nπ* character excitations has particular value since they often prove challenging to assess with optical spectroscopy. For 2-TP, the photoexcited S 2 (ππ*) state rapidly undergoes IC to the S 1 (nπ*) state below the instrument response time, followed by ISC to the T 1 (ππ*) state on a timescale of 600 fs in acetonitrile. For 4-TP, the timescale of S 2 to S 1 IC increases to 330 fs and the timescale of ISC increases to more than 10 ps. The differences between isomers are rationalized by considering the key role of the, nπ* intermediates in mediating the intersystem crossing of these systems. Varying the substitution pattern of the molecule can stabilize or destabilize these intermediates leading to the increase in ISC rate in the ortho isomer as compared to the para isomer, while changing the solvent from acetonitrile to water had minimal effect on the electronic excited state relaxation mechanism.

Garratt, Douglas [SLAC National Accelerator Labora↗
DOE OSTI2022

Practical guide to understanding goodness-of-fit metrics used in chemical state modeling of x-ray photoelectron spectroscopy data by synthetic line shapes using nylon as an example

Chemical state analysis of a sample surface through fitting bell-shaped curves to x-ray photoelectron spectroscopic polymer data is reviewed using nylon to introduce and discuss aspects of data analysis. Different strategies for modeling chemistry in nylon spectra are presented and in so doing, a case is made to include in published science the design logic and implementation in terms of line shapes and optimization parameter constraints between components in a peak model. Imperfections in line shape relative to the true shape for photoemission lines, when compensated for using constraints to optimization parameters, are shown to provide chemical state information about a sample that justify, for peak models constructed with these limitations, metrics for goodness-of-fit different from those expected for pulse-counted data.

Materials Science↗
DOE OSTI2022

Macroscale superlubricity by a sacrificial carbon nanotube coating

Superlubricity, i.e., coefficient of friction (COF) below 0.01, was earlier limited to microscale in controlled environments in the earlier literature and more recently realized for macroscale sliding of ceramic or carbon surfaces lubricated by water or other polar fluids. However, there is lack of report of superlubricity for the most common bearing system, i.e., steel-steel contact in non-polar oil lubrication. Here, in this work, we present ultra-low COF of 0.001–0.007 by using a sacrificial coating composed of vertically-aligned carbon nanotubes (CNTs) for macroscale steel-steel sliding under minimum quantity lubrication (MQL) of a polyalphaolefin (PAO) oil in the ambient environment. Raman spectroscopy and electron microscopy analyses detected graphene-containing tribofilms on both the steel surfaces, which was produced by the fractured CNT flakes and metallic wear debris during running-in. The in situ formed graphene-graphene contact interface presumably possesses a low shear resistance leading to superlubricity. The presence of oil, despite as little as one droplet, has proven to be crucial. Such a superlubricity performance has shown good sustainability in extended testing of more than 500,000 cycles and strong ability of accommodating changes in sliding conditions. Results here demonstrate feasibility with fundamental insights for achieving ambient environment macroscale superlubricity.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Probing the Surface Chemistry of Lithium Nitridation

Chemical synthesis of Li 3 N through lithium nitridation has potential to advance rechargeable battery and nitrogen fixation technology. However, studies of the conditions for forming Li 3 N on the lithium surface via nitrogen gas exposure report contradictory findings, such as the spontaneous reaction of Li with pure N 2 , the impossibility of forming Li 3 N through pure Li and N 2 interaction, the requirement of trace H 2 O to catalyze the reaction, and evidence to the contrary. In this study, ambient pressure X-ray photoelectron spectroscopy (APXPS) was applied to evaluate the in situ chemical evolution of the lithium metal surface under nitrogen gas up to 800 mTorr. At pressures ≤10 mTorr, no Li 3 N was detected. At higher pressures, surface Li 3 N rapidly reacts with trace CO 2 . Additionally, because metallic lithium is readily oxidized by trace gases, the atomic nitrogen concentration of the lithium surface remains below 2%. When nitridation follows oxidation by O 2 gas, CO 2 gas, or H 2 O vapor, surface Li 3 N formation is inhibited. These results suggest that nitrogen gas can diffuse through the oxidized lithium metal surface to react with subsurface metallic lithium.

Binding energy↗
DOE OSTI2021

Surfactant inhibition mechanisms of carbonate mineral dissolution in shale

Surfactants are common additives to hydraulic fracturing and enhanced oil recovery (EOR) fluids, and are under consideration for amendment to supercritical carbon dioxide for geological carbon sequestration (GCS). The effect of a common anionic surfactant, internal olefin sulfonate (IOS), on mineral dissolution from shale into brine was evaluated. When added to brine at concentrations exceeding the critical micelle concentration (94 mg/L), IOS inhibited carbonate mineral dissolution in an Eagle Ford shale, as well as dissolution of optical quality calcite (the dominant carbonate in the shale). Laser profilometry images provide spatial resolution across > 3 orders of magnitude, and indicate that IOS addition to brine both enhances the formation of new etch pits in calcite, and impedes their further growth. Time-of-flight secondary ion mass spectrometry surface profiles show for the first time that IOS preferentially adsorbs at calcite pit edges versus flat calcite surfaces (i.e., terraces). Surface pressure calculations, sulfur K-edge near edge X-ray absorption fine structure (NEXAFS) spectroscopy results, and density functional theory (DFT) calculations support this observation; the DFT results indicate that the sulfonate head group of the IOS molecule binds strongly to the calcite step site as compared to the terrace site. The S K-edge NEXAFS results indicate that IOS adsorbed more to etched calcite surfaces compared to smooth calcite surfaces. Overall, the results indicate that weak adsorption on flat calcite surfaces (i.e., terraces) disrupts water structure and enhances mass transfer of dissolution, while strong adsorption on calcite pit edges displaces adsorbed water and inhibits further etch pit growth. This work provides the first direct evidence of preferential adsorption of IOS to etched calcite surfaces and links it to macroscopic dissolution kinetics. Finally, this work has implications for surfactant-containing fluids used in hydraulic fracturing, EOR and potentially GCS for subsurface injection into carbonate rich reservoirs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Operando High-Energy-Resolution X-ray Spectroscopy of Evolving Cu Nanoparticle Electrocatalysts for CO 2 Reduction

Advances in electrocatalysis research rely heavily on building a thorough mechanistic understanding of catalyst active sites under realistic operating conditions. Only recently have techniques emerged that enable sensitive spectroscopic data collection to distinguish catalytically relevant surface sites from the underlying bulk material under applied potential in the presence of an electrolyte layer. Here, we demonstrate that operando high-energy-resolution fluorescence detected X-ray absorption spectroscopy (HERFD-XAS) is a powerful spectroscopic method which offers critical surface chemistry insights in CO 2 electroreduction with sub-electronvolt energy resolution using hard X-rays. Combined with the high surface area-to-volume ratio of 5 nm copper nanoparticles, operando HERFD-XAS allows us to observe with clear evidence the breaking of chemical bonds between the ligands and the Cu surface as part of the ligand desorption process occurring under electrochemical potentials relevant for the CO 2 reduction reaction (CO 2 RR). In addition, the dynamic evolution of oxidation state and coordination number throughout the operation of the nanocatalyst was continuously tracked. With these results in hand, undercoordinated metallic copper nanograins are proposed to be the real active sites in the CO 2 RR. In conclusion, this work emphasizes the importance of HERFD-XAS compared to routine XAS in catalyst characterization and mechanism exploration, especially in the complicated electrochemical CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Probing the electronic properties of gap states near the surface of n -SrTiO 3-δ / i -Si (001) heterojunctions with high sensitivity

We have measured soft x-ray resonant photoemission for the n–SrTiO 3–δ /i–Si⁡(001) (δ=~0.0003) hybrid semiconductor heterojunction with the goal of probing occupied electronic states in the band gap near the surface. By utilizing both swept energy, angle-integrated and fixed-energy, and angle-resolved spectroscopies, we identify the atomic and orbital character of the in-gap state as well as the different electronic phases that contribute to it. Specifically, we isolate the state associated with trapped charge on the n–SrTiO 3–δ surface that causes surface depletion from the localized gap state resulting from electron correlation effects in the complex oxide. Using an x-ray energy close to select dipole allowed TiL 3 → 3⁢d x-ray absorption resonances results in a 40-fold increase in sensitivity. Furthermore, this feature makes photoemission possible when probing electrons from dopants at concentrations as low as a few hundredths of a percent.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Consequences of long-term water exposure for bulk crystal structure and surface composition/chemistry of nickel-rich layered oxide materials for Li-ion batteries

Water exposure of layered nickel-rich transition metal oxide electrodes, widely used in high-energy lithium-ion batteries, has detrimental effects on the electrochemical performance, which complicates electrode handling and prevents implementation of environmentally benign aqueous processing procedures. Elucidating the degradation mechanisms in play may help rationally mitigate/circumvent key challenges. Here, the bulk structural consequences of long-term (>2.5 years) deuterated water (D2O) exposure of intercalation materials with compositions Li x Ni 0.5 Co 0.2 Mn 0.3 O 2 (NCM523) and Li x Ni 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) are studied by neutron powder diffraction (NPD). Detailed inspection of the NPD data reveals gradual formation of a secondary crystalline phase in all exposed samples, not previously reported for this system. This unknown phase forms faster in liquid- compared to vapor-exposed compounds. Structural modelling of the NPD data shows a stable level of Li/Ni anti-site defects and does not indicate any significant changes in lattice parameters or hydrogen-lithium (D + /Li + ) exchange in the structure. Consequently, the secondary phase formation must take place via transformation rather than modification of the parent material. X-ray photoelectron spectroscopy data indicate formation of LiHCO 3 /Li 2 CO 3 at the surface and a Li-deficient oxide in the sub-surface region of the pristine compounds, and the presence of adsorbed water and transition metal hydroxides at the exposed sample surfaces.

25 ENERGY STORAGE↗
DOE OSTI2020

Accuracy in Resolving the First Hydration Layer on a Transition-Metal Oxide Surface: Experiment (AP-XPS) and Theory

Understanding the equilibrium conditions at the metal oxide/aqueous interface is a key component toward visualizing the structure of water in confined environments and differentiating the catalytic activity of transition-metal oxides. While ambient pressure X-ray photoelectron spectroscopy (AP-XPS) has been the primary technique to investigate the formation of a hydration layer on many surfaces, results over the extended relative humidity (RH) range accessible experimentally have not been compared quantitatively to theoretical predictions. With the use of first-principles theoretical methods and accumulated knowledge of AP-XPS spectral analysis, we do so here for a model surface, TiO 2 -terminated undoped SrTiO 3 (100) (STO). The measured distribution of OH and H 2 O coverages from vacuum up to the first hydration layer is in good agreement with a static density functional theory (DFT) configuration involving partial dissociation of H 2 O per Ti-atom mediated by H-bonding. Furthermore, ab initio molecular dynamics (AIMD) simulations at 300 K for select coverages (1/4, 1/2, and 1 ML) test the role of fluctuations and entropy in the competition between adsorption and dissociation with coverage. This comparison between theory and experiment for OH and H 2 O coverages on STO provides a foundation for a more quantitative assessment of the first hydration layer and associated competition between adsorption, dissociation, and H-bonding on transition-metal oxide surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Optical tuning of the diamond Fermi level measured by correlated scanning probe microscopy and quantum defect spectroscopy

Quantum technologies based on quantum point defects in crystals require control over the defect charge state. Here we tune the charge state of shallow nitrogen-vacancy and silicon-vacancy centers by locally oxidizing a hydrogenated surface with moderate optical excitation and simultaneous spectral monitoring. The loss of conductivity and change in work function due to oxidation are measured in atmosphere using conductive atomic force microscopy and Kelvin probe force microscopy (KPFM). We correlate these scanning probe measurements with optical spectroscopy of the nitrogen-vacancy and silicon-vacancy centers created via implantation 15–25 nm beneath the diamond surface and annealing. The observed charge state of the defects as a function of optical exposure demonstrates that laser oxidation provides a way to precisely tune the Fermi level over a range of at least 2.00 eV. We also observe a significantly larger oxidation rate for implanted surfaces compared to unimplanted surfaces under ambient conditions. Here, combined with knowledge of the electron affinity of a surface, these results suggest KPFM is a powerful, high-spatial-resolution technique to advance surface Fermi level engineering for charge stabilization of quantum defects.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Net lithium deposition and dominant self-sputtering in lithium tokamak experiment-β with a liquid lithium wall

We observed enhanced net lithium deposition and lithium erosion, possibly dominated by physical sputtering of lithium by lithium-ion bombardment, on the outer plasma-facing surface in the Lithium Tokamak eXperiment-β (LTX-β) during liquid lithium wall operations. Silicon crystal samples with micro-trenches (30 μm × 30 μm × 2–7 μm deep) were exposed to hydrogen plasmas in LTX-β for solid and liquid lithium wall operations. Post-mortem analysis using X-ray photoelectron spectroscopy combined with argon ion sputtering measured net lithium deposition of 8.2 or 21 nm on the silicon crystal surface exposed for ~ 50 repeated shots of ~ 50-ms hydrogen plasma discharges during the liquid lithium wall operations at a vessel temperature of 475 K. Energy dispersive X-ray spectroscopy measured oxygen concentration patterns on the micro-trench floors, which were due to oxidized lithium deposition. Using the inhomogeneous oxygen concentration pattern caused by an ion-shadowing effect associated with the micro-trench’s geometric structure, we determined a polar incident ion direction of 68.4 ± 1.6° referenced to the surface normal direction. This observation was well-explained by the hypothesis that self-sputtering of Li was a dominant lithium erosion source in addition to lithium sputtering by hydrogen bombardment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Operando NRIXS and XAFS Investigation of Segregation Phenomena in Fe-Cu and Fe-Ag Nanoparticle Catalysts during CO 2 Electroreduction

Operando nuclear resonant inelastic X-ray scattering (NRIXS) and X-ray absorption fine-structure spectroscopy (XAFS) measurements were used to gain insight into the structure and surface composition of FeCu and FeAg nanoparticles (NPs) during the electrochemical CO 2 reduction (CO 2 RR) and to extract correlations with their catalytic activity and selectivity. The formation of a core–shell structure during CO 2 RR for FeAg NPs was inferred from the analysis of the operando NRIXS data (phonon density of states, PDOS) and XAFS measurements. Electrochemical analysis of the FeAg NPs revealed a faradaic selectivity of 36 % for CO in 0.1 M KHCO 3 at -1.1 V vs. RHE, similar to that of pure Ag NPs. In contrast, a predominant selectivity towards H 2 evolution is obtained in the case of the FeCu NPs, analogous to the results obtained for pure Fe NPs, although small Cu NPs have also been shown to favor H 2 production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Gold Catalysts Synthesized Using a Modified Incipient Wetness Impregnation Method for Propylene Epoxidation

Propylene epoxidation in the presence of oxygen and hydrogen were measured for a series of Au/TS-1 catalysts prepared by a modified incipient wetness impregnation (mIWI) method. This method enables precise control of the Au : Ti ratio in the Au/TS-1 catalysts. The optimized Au/TS-1 catalyst exhibited 12 % propylene conversion, 87 % PO selectivity, and 25 % hydrogen efficiency. The particle size of gold nanoparticles prepared by the modified IWI was between 2 and 3 nm, as demonstrated by XRD patterns, STEM images, and X-ray absorption spectroscopy at the Au L(3)edge. XPS spectra showed that the surface species on the catalysts were similar. UV-Vis spectra suggested that in the modified IWI method, the chlorine ligands in Au(Cl)(4)(-)were replaced by hydroxyl groups, which contributes to form small gold nanoparticles. Kinetic studies showed that the active sites of Au(mIWI)/TS-1 are similar to the Au(DP)/TS-1 prepared by deposition precipitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Highly Selective Carbon-Supported Boron for Oxidative Dehydrogenation of Propane

Bulk boron materials, such as hexagonal boron nitride (h-BN), are highly selective catalysts for the oxidative dehydrogenation of propane (ODHP). Previous attempts to improve the productivity of these systems involved the immobilization of boron on silica and resulted in less selective catalysts. Here, we report that acid-treated, activated carbon-supported boron prepared via incipient wetness impregnation with boric acid (B/OAC) exhibits equal propylene selectivity and improved productivity (kg propylene kg cat -1 hr -1 ) as compared to h-BN. Characterization of the fresh and spent catalysts with infrared, Raman, X-ray photoelectron, and solid-state NMR spectroscopies reveals the presence of oxidized/hydrolyzed boron that is clustered on the surface of the support.

03 NATURAL GAS↗
DOE OSTI2021

Dual-shell silicate and alumina coating for long lasting and high capacity lithium ion batteries

In this work we demonstrate a theory-driven, novel dual-shell coating system of Li 2 SrSiO 4 and Al 2 O 3 , achieved via a facile and scalable sol-gel technique on LiCoO 2 electrode particles. The optimal thickness of each coating can lead to increased specific capacity (~185 mAh/g at 0.5 C-rate) at a cut-off potential of 4.5 V, and greater cycling stability at very high C rates (up to 10 C) in half-cells with lithium metal. The mechanism of this superior performance was investigated using a combination of X-ray and electron characterization methods. It shows that the results of this investigation can inform future studies to identify still better dual-shell coating schemes, achieved by such industrially feasible techniques, for application on similar, nickel-rich cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Atomic Force Microscopy-Based Force Spectroscopy and Multiparametric Imaging of Biomolecular and Cellular Systems

During the last three decades, a series of key technological improvements turned atomic force microscopy (AFM) into a nanoscopic laboratory to directly observe and chemically characterize molecular and cell biological systems under physiological conditions. In this work, we review key technological improvements that have established AFM as an analytical tool to observe and quantify native biological systems from the micro- to the nanoscale. Native biological systems include living tissues, cells, and cellular components such as single or complexed proteins, nucleic acids, lipids, or sugars. We showcase the procedures to customize nanoscopic chemical laboratories by functionalizing AFM tips and outline the advantages and limitations in applying different AFM modes to chemically image, sense, and manipulate biosystems at (sub)nanometer spatial and millisecond temporal resolution. We further discuss theoretical approaches to extract the kinetic and thermodynamic parameters of specific biomolecular interactions detected by AFM for single bonds and extend the discussion to multiple bonds. Finally, we highlight the potential of combining AFM with optical microscopy and spectroscopy to address the full complexity of biological systems and to tackle fundamental challenges in life sciences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Deactivation of Mo/H-ZSM-5 in Microwave-Assisted and Thermal-Driven Methane Dehydroaromatization

A better understanding of catalyst deactivation is needed to improve catalyst design and performance in microwave-enhanced methane dehydroaromatization (MDA). Here, this study investigates the deactivation of a molybdenum supported H-ZSM-5 zeolite (Mo/H-ZSM-5) catalyst in MDA under microwave-heated conditions, comparing its performance to that of the same catalyst under conventional heating. While the microwave-assisted (MW) process achieved higher benzene yields, the catalyst experienced faster deactivation due to the selective and rapid deposition of coke within the pores of the zeolite, as confirmed through Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), ammonia-temperature programmed desorption (NH 3 -TPD), thermal gravimetric analysis (TGA), temperature programmed oxidation (TPO), and X-ray photoelectron spectroscopy (XPS) analyses. The quantification of total coke content via TGA/TPO and surface carbon (XPS) revealed that nearly twice as much coke was deposited on the catalyst under MW conditions compared to that on the conventionally heated material, and the coke exhibited a more conductive and graphitic nature. The accelerated deactivation rates were attributed to the formation of hot spots in the MW system, leading to enhanced coupling with coke formed in situ during the reaction and resulting in increased Mo reduction. Observations indicated that the CO activation used to carburize the catalyst prior to the reaction is not advantageous in the MW heating environment. The presence of large amounts of Mo oxides at elevated temperatures (through hot spots) exposed to methane leads to instability under the reaction conditions. Optimizing the activation environment and improvement of the Mo dispersion within the pores are potential strategies to improve catalyst stability.

Mo/H-ZSM-5 zeolite↗
DOE OSTI2021

Exciton-Phonon Coupling and Carrier Relaxation in PbS Quantum Dots: The Case of Carboxylate Ligands

Some ligand-nanocrystal combinations exhibit rapid cooling of highly excited electronic states while other nanocrystal/shell combinations do not appear to have this effect. There remains a need to identify the distinguishing properties of ligand-nanocrystal interactions that avoid such rapid relaxation processes to guide the design of colloidal quantum dots (QDs) that take advantage of multiple exciton generation or hot-carrier extraction processes. Here, we use mid-infrared transient absorption spectroscopy to investigate the influence that carboxylate ligands with distinct excited state surface chemistries has on exciton-phonon coupling and hot exciton relaxation in PbS quantum dot (QD) films. Our findings reveal that despite significant differences in the excited state surface chemistry of oleate (OA) and iodide/mercaptopropionic acid (I-/MPA) ligands, PbS QD films passivated with both ligand types exhibit identical electronic relaxation rates and exciton-phonon coupling strengths within experimental precision. The data suggest that the inorganic lattice is the principal source of exciton-phonon coupling that influences hot exciton relaxation, rather than the vibronic modes of carboxylate ligands. The size-dependent nature of the exciton-phonon coupling strength is consistent with the localization of charge on the QD surfaces, which enhances the mixing of electronic and nuclear coordinates particularly when the electronic states are more quantum confined in smaller nanocrystals.

14 SOLAR ENERGY↗