Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Thermomechanical peridynamic analysis with irregular non-uniform domain discretization [Thermomechanical peridynamic analysis with non-uniform domain discretization]

Non-uniform discretization of the solution domain in models based on peridynamic theory can improve computational efficiency by allowing for local refinement where needed for accuracy, and helps remove the effect of mesh bias in the simulations. However, the use of non-uniform discretization and a variable horizon requires consideration of possible unbalanced interactions between two material points, adjustment of peridynamic material parameters, and arbitrary shapes of interaction domains. This study presents a modification to the original peridynamic theory in which the strain energy associated with an interaction between two material points is split according to the volumetric ratio arising from the presence of non-uniform discretization and a variable horizon. It also removes the requirement for correction of peridynamic material parameters due to surface effects. Furthermore, the accuracy of this approach is verified against benchmark solutions, and its applicability to engineering problems is demonstrated by considering thermally induced cracking in a nuclear fuel pellet.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Exploratory investigation of the effect of porous surfaces on hypersonic turbulent boundary layers

Four different test surfaces were studied to determine the effect of porous walls on the characteristics of a hypersonic turbulent flat-plate boundary layer. The investigation was an attempt to decrease the surface shear of the boundary layer by transmitting fluctuating pressure energy through the wall and absorbing it in a cavity beneath the wall. Pitot surveys were made at two locations, schlieren photographs of the boundary layer were taken, and hot-wire measurements in the flow above the boundary layer were made to determine whether the surfaces affected the turbulent boundary layer. Neither an increase nor a decrease in surface shear or boundary-layer growth was detected. Tabulations of the pitot data are included.

Watson, R. D.↗

Dielectric properties of crystalline organic molecular films in the limit of zero overlap

We present the calculation of the static dielectric susceptibility tensor and dipole field sums in thin molecular films in the well-defined limit of zero intermolecular overlap. Microelectrostatic and charge redistribution approaches are applied to study the evolution of dielectric properties from one to a few molecular layers in films of different conjugated molecules with organic electronics applications. Because of the conditional convergence of dipolar interactions, dipole fields depend on the shape of the sample and different values are found in the middle layer of a thick film and in the bulk. The shape dependence is eliminated when depolarization is taken into account, and the dielectric tensor of molecular films converges to the bulk limit within a few molecular layers. We quantify the magnitude of surface effects and interpret general trends among different systems in terms of molecular properties, such as shape, polarizability anisotropy, and supramolecular organization. A connection between atomistic models for molecular dielectrics and simpler theories for polarizable atomic lattices is also provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A LARGE GROUP OF ASYMPTOTIC GIANT BRANCH STARS IN THE DISK OF M31: A MISSING PIECE OF THE PUZZLE?

We examine the properties of a stellar grouping that is {approx}3.5 kpc to the northeast of the center of M31. This structure has (1) a surface brightness that is lower than the surrounding disk, (2) a more-or-less round appearance, (3) a size of {approx}300 arcsec ({approx}1 kpc), and (4) an integrated brightness K = 6.5. It is populated by stars with ages {>=}100 Myr and J - K colors that tend to be bluer than those of stars in the surrounding disk. Comparisons with model luminosity functions suggest that the star formation rate in this object has changed twice in the past few hundred Myr. Fitting a Sersic function to the light profile reveals a power-law index and effective surface brightness that are similar to those of dwarf galaxies with the same integrated brightness. Two possible origins for this object are considered: (1) it is a heretofore undiscovered satellite of M31 that is seen against/in/through the M31 disk or (2) it is a fossil star-forming region in the M31 disk.

79 ASTRONOMY AND ASTROPHYSICS↗

Transparent conductor-Si pillars heterojunction photodetector

We report a high-performing heterojunction photodetector by enhanced surface effects. Periodically, patterned Si substrates were used to enlarge the photo-reactive regions and yield proportionally improved photo-responses. An optically transparent indium-tin-oxide (ITO) was deposited on a Si substrate and spontaneously formed an ITO/Si heterojunction. Due to an electrical conductive ITO film, ITO/Si heterojunction device can be operated at zero-bias, which effectively suppresses the dark current, resulting in better performances than those by a positive or a negative bias operation. This zero-bias operating heterojunction device exhibits a short response time (∼ 22.5 ms) due to the physical reaction to the incident light. We revealed that the location of the space charge region (SCR) is crucial for a specific photon-wavelength response. The SCR space has the highest collection efficiency of the photo-generated carriers. The photo-response can be maximized when we design the photodetector by superposing the SCR space over a corresponding photon-absorption length. The surface enhanced Si pillar devices significantly improved the photo-responses ratios from that of a planar Si device. According to this design scheme, a high photo-response ratio of 5560% was achieved at a wavelength of 600 nm. This surfaced-enhanced heterojunction design scheme would be a promising approach for various photoelectric applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetism in undoped ZnS studied from density functional theory

The magnetic property induced by the native defects in ZnS bulk, thin film, and quantum dots are investigated comprehensively based on density functional theory within the generalized gradient approximation + Hubbard U (GGA + U) approach. We find the origin of magnetism is closely related to the introduction of hole into ZnS systems. The relative localization of S-3p orbitals is another key to resulting in unpaired p-electron, due to Hund's rule. For almost all the ZnS systems under study, the magnetic moment arises from the S-dangling bonds generated by Zn vacancies. The charge-neutral Zn vacancy, Zn vacancy in 1− charge sate, and S vacancy in the 1+ charge sate produce a local magnetic moment of 2.0, 1.0, and 1.0 μ{sub B}, respectively. The Zn vacancy in the neutral and 1− charge sates are the important cause for the ferromagnetism in ZnS bulk, with a Curie temperature (T{sub C}) above room temperature. For ZnS thin film with clean (111) surfaces, the spins on each surface are ferromagnetically coupled but antiferromagnetically coupled between two surfaces, which is attributable to the internal electric field between the two polar (111) surfaces of the thin film. Only surface Zn vacancies can yield local magnetic moment for ZnS thin film and quantum dot, which is ascribed to the surface effect. Interactions between magnetic moments on S-3p states induced by hole-doping are responsible for the ferromagnetism observed experimentally in various ZnS samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE STELLAR MASS STRUCTURE OF MASSIVE GALAXIES FROM z = 0 TO z = 2.5: SURFACE DENSITY PROFILES AND HALF-MASS RADII

We present stellar mass surface density profiles of a mass-selected sample of 177 galaxies at 0.5 < z < 2.5, obtained using very deep Hubble Space Telescope optical and near-infrared data over the GOODS-South field, including recent CANDELS data. Accurate stellar mass surface density profiles have been measured for the first time for a complete sample of high-redshift galaxies more massive than 10{sup 10.7} M {sub Sun }. The key advantage of this study compared to previous work is that the surface brightness profiles are deconvolved for point-spread function smoothing, allowing accurate measurements of the structure of the galaxies. The surface brightness profiles account for contributions from complex galaxy structures such as rings and faint outer disks. Mass profiles are derived using radial rest-frame ug color profiles and a well-established empirical relation between these colors and the stellar mass-to-light ratio. We derive stellar half-mass radii from the mass profiles, and find that these are on average {approx}25% smaller than rest-frame g-band half-light radii. This average size difference of 25% is the same at all redshifts, and does not correlate with stellar mass, specific star formation rate, effective surface density, Sersic index, or galaxy size. Although on average the difference between half-mass size and half-light size is modest, for approximately 10% of massive galaxies this difference is more than a factor of two. These extreme galaxies are mostly extended, disk-like systems with large central bulges. These results are robust, but could be impacted if the central dust extinction becomes high. ALMA observations can be used to explore this possibility. These results provide added support for galaxy growth scenarios wherein massive galaxies at these epochs grow by accretion onto their outer regions.

79 ASTRONOMY AND ASTROPHYSICS↗

The Effect of Gamma Radiation Exposure on Active Silicon Photonic Device Performance Metrics

In this study, we test Si vertical junction disk modulators and waveguide-integrated Ge PIN photodiodes to see how the key performance metrics are affected by 60Co gamma radiation (total ionizing dose), a common proxy for simulating a mix of high energy ion particle flux. It is found that reverse bias dark current increases significantly for both devices after 1 Mrad(Si) exposure. Whereas the bandwidth of the Si disk modulator decreases by 6.5 % after 1 Mrad(Si) dose, the bandwidth of the Ge PIN photodiode appears to be unaffected. The increased sensitivity of the Si disk modulator bandwidth to gamma radiation is hypothesized to be caused by a decrease in the carrier concentration of the junction with a resulting increase in p-n junction RC time constant. The Ge PIN photodiode is relatively insensitive to the surface effects because the absorption happens away from the SiO2-Ge interface and the gamma radiation has a minimal effect on carrier mobility.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Revealing the Transient Formation Dynamics and Optoelectronic Properties of 2D Ruddlesden–Popper Phases on 3D Perovskites

Using in situ photoluminescence measurements during the spin-coating and annealing steps, this study probes the formation of 2D layers on 3D triple cation perovskite films comparing phenylethylammonium and 2-thiophenemethylammonium iodide bulky cations. This study elucidates the formation mechanisms of the surface layers for both cases and reveals two regimes during 2D layer formation: a kinetic-driven and a thermodynamic-driven process. These driving forces result in different compositions of the 2D/3D interface for each treatment, namely, different ratios of pure 2D (n = 1) and quasi-2D (n > 1) structures. Further, this study shows that a higher ratio of quasi-2D phases is more beneficial for device performance, as pure-2D layers may hamper current extraction. Due to a more evenly distributed formation energy profile among 2D and quasi-2D phases, highly concentrated 2-thiophenemethylammonium iodide appears to be more suited for effective surface passivation than its phenylethylammonium analog.

36 MATERIALS SCIENCE↗

Concept of Lattice Mismatch and Emergence of Surface States in Two-dimensional Hybrid Perovskite Quantum Wells

We present that surface states are ubiquitous to semiconductors and significantly impact the physical properties and, consequently, the performance of optoelectronic devices. Moreover, surface effects are strongly amplified in lower dimensional systems such as quantum wells and nanostructures. Layered halide perovskites (LHPs) are two-dimensional solution-processed natural quantum wells where optoelectronic properties can be tuned by varying the perovskite layer thickness n, i.e., the number of octahedra spanning the layer. They are efficient semiconductors with technologically relevant stability. Here, a generic elastic model and electronic structure modeling are applied to LHPs heterostructures with various layer thickness. We show that the relaxation of the interface strain is triggered by perovskite layers above a critical thickness. This leads to the release of the mechanical energy arising from the lattice mismatch, which nucleates the surface reorganization and may potentially induce the formation of previously observed lower energy edge states. Finally, these states, which are absent in three-dimensional perovskites are anticipated to play a crucial role in the design of LHPs for optoelectronic systems.

36 MATERIALS SCIENCE↗

Unraveling the Formation Mechanism of a Hybrid Zr-Based Chemical Conversion Coating with Organic and Copper Compounds for Corrosion Inhibition

Environmental-friendly chromate-free, zirconium (Zr)-based conversion coating is a promising green technology for corrosion protection. Additives in the surface treatment provides critical functionalities and performance improvements; however, mechanistic understanding as of how the additives influence the coatings remains unclear. In this study, a new organic-inorganic hybrid Zrbased conversion coating which combines copper (Cu) compounds and polyamidoamine (PAMAM), taking advantages of a complementary nature of organic and inorganic additives. Here, a multimodal approach combining electron and X-ray characterization is applied to study the interaction of Cu 2+ and PAMAM and the resulting impacts on the coating formation. Adding PAMAM changed the surface morphology, thickness, distribution of Cu in the cluster and void formation of the coatings. High PAMAM (100-200 pm) leads to little conversion coating formation, and low PAMAM (0-25 ppm) shows voids formation under the coatings. Moreover, PAMAM incorporates in the coating in a form of PAMAM-Cu complex with a higher concentration towards the surface, provides an organic layer at the surface of the coating. X-ray absorption near-edge structure (XANES) spectroscopy shows a difference between the conventional and hybrid coating treatments in an alkaline solution to simulate the E-coat process, suggesting the contribution of PAMAM in the enhanced chemical stability in an alkaline environment. Therefore, an intermediate range of addition of PAMAM (50 ppm) is optimal to 1) avoid excessive voids formation, 2) promote some Cu cluster formation and thus enhancing the Zr-based coating formation and 3) incorporate organic components into the coating to improve the adhesion of the subsequent coatings. Overall, this work furthers our knowledge on the formation mechanism of an effective and environmentally friendly hybrid conversion coating for corrosion inhibition, demonstrating a critical processing-structureproperty relationship. This study will benefit future development of green and effective surface treatment technology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tuning the electronic properties at the surface of BaBiO{sub 3} thin films

The presence of 2D electron gases at surfaces or interfaces in oxide thin films remains a hot topic in condensed matter physics. In particular, BaBiO{sub 3} appears as a very interesting system as it was theoretically proposed that its (001) surface should become metallic if a Bi-termination is achieved (Vildosola et al., PRL 110, 206805 (2013)). Here we report on the preparation by pulsed laser deposition and characterization of BaBiO{sub 3} thin films on silicon. We show that the texture of the films can be tuned by controlling the growth conditions, being possible to stabilize strongly (100)-textured films. We find significant differences on the spectroscopic and transport properties between (100)-textured and non-textured films. We rationalize these experimental results by performing first principles calculations, which indicate the existence of electron doping at the (100) surface. This stabilizes Bi ions in a 3+ state, shortens Bi-O bonds and reduces the electronic band gap, increasing the surface conductivity. Our results emphasize the importance of surface effects on the electronic properties of perovskites, and provide strategies to design novel oxide heterostructures with potential interface-related 2D electron gases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Causes of and Solutions to Wind Speed Bias in NREL's 2020 Offshore Wind Resource Assessment for the California Pacific Outer Continental Shelf

This report provides the results of a detailed analysis into the causes of high wind speed bias in the 20-year wind resource data set for offshore California the National Renewable Energy Laboratory (NREL) released in 2020, herein called CA20. The data set was developed using the state-of-the-art Weather Research and Forecasting (WRF) model. Notably, no floating lidars were available at the time in offshore California to validate offshore hub-height wind speeds. In late 2020, the Pacific Northwest National Laboratory (PNNL) deployed two floating lidars in the California outer continental shelf (OCS), near the Bureau of Ocean Energy Management (BOEM) call areas of Humboldt and Morro Bay. Using these observations through 2021, NREL found considerable bias in modeled hub-height winds at both locations: up to +2 m/s at Humboldt over a 6-month period, and up to +1 m/s at Morro Bay over a one-year period. Upon the discovery of this bias, the Department of Energy (DOE) and BOEM funded NREL and PNNL to investigate the causes of, impacts of, and solutions to the bias in the CA20 data set. This report summarizes the findings of this research. We first investigated whether different WRF model setups could lead to reduced bias. We found that the choice of planetary boundary layer (PBL) scheme - which controls the vertical turbulent mixing of momentum, heat, and moisture in the lowermost part of the atmosphere - greatly affected hub-height wind speeds in the region. Specifically, switching from the Mellor-Yamada-Nakanishi-Niino (MYNN) scheme used in CA20 (and widely used across a range of operational and research weather models) to the less common Yonsei University (YSU) scheme nearly eliminated the bias at both the Humboldt and Morro Bay lidar locations. The large discrepancy between the MYNN- and YSU-modeled hub-height winds pointed towards the role of atmospheric stability. In general, PBL schemes agree well in conditions of high turbulence and mixing, normally referred to as "unstable" conditions. By contrast, PBL schemes start to diverge in "stable" conditions, where turbulence is low and thermal stratification (i.e., higher temperature air sitting on top of colder air) greatly suppresses vertical mixing. Under such conditions, winds aloft can decouple from surface effects and greatly accelerate, causing high wind speeds at hub-height and frequent low-level jets (LLJs). We determined that these stable conditions are in fact dominant in offshore California. The region is characterized by moderate-to-extreme stable stratification with a LLJ on average around 200 meters above sea-level. To our knowledge, no wind energy area globally has as strongly stable stratification as offshore California. Under these extreme conditions, we determined that the MYNN scheme models higher stability than YSU, resulting in less vertical turbulent mixing than YSU, allowing for the acceleration of hub-height winds, more intense LLJs, and higher-amplitude inertial oscillations. Using surface observations, we found that MYNN overestimates near-surface stability, whereas YSU tends to model stability better. We then considered several short-term case studies to assess additional meteorological drivers of the bias at Humboldt. We found that during synoptic scale northerly flows driven by the North Pacific High and inland thermal low, a coastal warm bias in the MYNN case studies contributes to the modeled wind speed bias by altering the boundary layer thermodynamics via a thermal wind mechanism. Given the strong performance of the YSU-based runs in offshore California, NREL has produced and published an updated version of the CA20 data set with YSU as the PBL scheme. This updated data set is now part of NREL's 2023 National Offshore Wind (NOW-23) data set, which covers all the U.S. offshore waters. The development and final validation of the NOW-23 data set in offshore California is documented in this report.

17 WIND ENERGY↗

Molecular beam scattering of ammonia from a dodecane flat liquid jet

The evaporation and scattering of ND 3 from a dodecane flat liquid jet are investigated and the results are compared with previous studies on molecular beam scattering from liquid surfaces. Evaporation is well-described by a Maxwell–Boltzmann flux distribution with a cos θ angular distribution at the liquid temperature. Scattering experiments at E i = 28.8 kJ mol -1 over a range of deflection angles show evidence for impulsive scattering and thermal desorption. Further, at a deflection angle of 90°, the thermal desorption fraction is 0.49, which is higher than that of other molecules previously scattered from dodecane and consistent with work performed on NH 3 scattering from a squalane-wetted wheel. ND 3 scattering from dodecane results in super-specular scattering, as seen in previous experiments on dodecane. The impulsive scattering channel is fitted to a “soft-sphere” model, yielding an effective surface mass of 55 amu and an internal excitation of 5.08 kJ mol -1 . Overall, impulsively scattered ND 3 behaves similarly to other small molecules scattered from dodecane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Field emission behavior of vertically aligned ZnO nanowire planar cathodes

A field emission (FE) study by scanning anode field emission microscopy was performed to evaluate the FE properties of vertically aligned zinc oxide (ZnO) nanowire arrays electrodeposited on a plane conductive surface. The specific FE behaviors of the cathode observed experimentally are (1) a turn-on macroscopic field of about 6 V/{mu}m for a FE current density J{sub FE} 5 x 10{sup -4} A/cm{sup 2}, (2) a stable FE characteristics for 5 x 10{sup -4} < J{sub FE} < 5 x 10{sup -2} A/cm{sup 2}, and (3) a brutal shut down of FE when J{sub FE} crossed a limiting value of {approx}0.05 A/cm{sup 2} due to a rapid evolution of the nanowires toward a bulbous tip geometry or a complete melting. A physical process of FE from ZnO nanostructures is proposed from the experimental data analyses. An effective surface barrier of about 1 eV was determined from the experimental Fowler-Nordheim plot and the presence of a Zn enriched surface was assumed in considering the possibility of important modifications of the crystallography and charge transfers at the surface of ZnO nanowires during the application of the strong electric field required for FE.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Relationships between pigment composition variation and reflectance for plant species from a coastal savannah in California

Advances in imaging spectroscopy have indicated that remotely sensed reflectance measurements of the plant canopy may be used to identify and qualify some classes of canopy biochemicals; however, the manner in which differences in biochemical compositions translate into differences is not well understood. Most frequently, multiple linear regression routines have been used to correlate narrow band reflectance values with measured biochemical concentrations. Although some success has been achieved with such methods for given data sets, the bands selected by multiple regression are not consistent between data sets, nor is it always clear what physical or biological basis underlies the correlation. To examine the relationship between biochemical concentration and leaf reflectance signal we chose to focus on the visible spectrum where the primary biochemical absorbances are due to photosynthetic pigments. Pigments provide a range of absorbance features, occur over a range of concentrations in natural samples, and are ecophysiologically important. Concentrations of chlorophyll, for example, have been strongly correlated to foliar nitrogen levels within a species and to photosynthetic capacity across many species. In addition pigments effectively absorb most of the photosynthetically active radiation between 400-700 nm, a spectral region for which silicon detectors have good signal/noise characteristics. Our strategy has been to sample a variety of naturally occurring species to measure leaf reflectance and pigment compositions. We hope to extend our understanding of pigment reflectance effects to interpret small overlapping absorbances of other biochemicals in the infrared region. For this reason, selected samples were also tested to determine total nitrogen, crude protein, cellulose, and lignin levels. Leaf reflectance spectra measured with AVIRIS bandwidths and wavelengths were compared between species and within species and for differences between seasons, for changes in the the shape of the spectra. We attempt to statistically correlate these shape changes with differences in pigment compositions. In parallel with our comparisons of pigment composition and leaf reflectance, we have modified the PROSPECT leaf reflectance model to test the contributions of pigments or pigment group concentrations. PROSPECT considers a leaf as a multi-layer dielectric plane with an uneven surface. Jacquemoud adapted the basic analysis of Allen for surface effects, a leaf thickness factor, and the absorption of water and chlorophyll (actually all pigments) and the plant matrix. Our modifications to PROSPECT in the forward direction include breaking out the pigment concentration parameter into separate components for chlorophyll a and b and a number of xanthophylls and carotenes, and introducing a shift and convolution function to model the spread and shift from their in vitro measurements to their in vivo state. Further, we have considered how the matrix elements (i.e., all biochemicals and structural effects not modeled explicity) vary with species.

Ustin, Susan L.↗

WILSON-BAPPU EFFECT: EXTENDED TO SURFACE GRAVITY

In 1957, Wilson and Bappu found a tight correlation between the stellar absolute visual magnitude (M{sub V} ) and the width of the Ca II K emission line for late-type stars. Here, we revisit the Wilson-Bappu relationship (WBR) to claim that the WBR can be an excellent indicator of stellar surface gravity of late-type stars as well as a distance indicator. We have measured the width (W) of the Ca II K emission line in high-resolution spectra of 125 late-type stars obtained with the Bohyunsan Optical Echelle Spectrograph and adopted from the Ultraviolet and Visual Echelle Spectrograph archive. Based on our measurement of the emission line width (W), we have obtained a WBR of M{sub V} = 33.76 - 18.08 log W. In order to extend the WBR to being a surface gravity indicator, stellar atmospheric parameters such as effective temperature (T{sub eff}), surface gravity (log g), metallicity ([Fe/H]), and micro-turbulence ({xi}{sub tur}) have been derived from self-consistent detailed analysis using the Kurucz stellar atmospheric model and the abundance analysis code, MOOG. Using these stellar parameters and log W, we found that log g = -5.85 log W+9.97 log T{sub eff} - 23.48 for late-type stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Asymmetry in the Seasonal Cycle of Zonal-Mean Surface Air Temperature

At most latitudes, the seasonal cycle of zonal-mean surface air temperature is notably asymmetric: the length of the warming season is not equal to the length of the cooling season. The asymmetry varies spatially, with the cooling season being ∼40 days shorter than the warming season in the subtropics and the warming season being ∼100 days shorter than the cooling season at the poles. Furthermore, the asymmetry differs between the Northern Hemisphere and the Southern Hemisphere. Here, we show that these observed features are broadly captured in a simple model for the evolution of temperature forced by realistic insolation. The model suggests that Earth's orbital eccentricity largely determines the hemispheric contrast, and obliquity broadly dictates the meridional structure. Clouds, atmospheric heat flux convergence, and time-invariant effective surface heat capacity have minimal impacts on seasonal asymmetry. This simple, first-order picture has been absent from previous discussions of the surface temperature seasonal cycle.

seasonal cycle↗