Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “subsurface data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Development of an ERT‐Based Framework for Bentonite Buffers Monitoring From Laboratory Tests: 1. Characterizing Thermal–Hydrological–Mechanical Processes

Abstract Bentonite clay is widely used in engineered barrier systems for the permanent disposal of high‐level radioactive waste due to its low permeability, high swelling capacity, and thermal stability. However, the complex thermal‐hydrological‐mechanical (THM) processes induced by heating from decaying radioactive waste and hydration from surrounding rock can lead to heterogeneous changes that are difficult to measure and predict. This study develops an Electrical Resistivity Tomography (ERT)‐based framework for monitoring THM processes, progressing from sample‐scale to bench‐scale tests, to inform field‐scale applications. Sample‐scale tests analyzed small bentonite samples under controlled variations in water content, temperature, and porosity to establish fundamental resistivity relationships. Bench‐scale tests involved larger bentonite columns subjected to heating (up to 200°C) and hydration under controlled pressure, simulating repository conditions. ERT measurements, complemented by X‐ray CT imaging, temperature monitoring, and tracing sensors, revealed coupled THM processes, such as hydration‐induced compression, swelling, and thermal gradients, leading to complex resistivity patterns. The results demonstrate the potential of ERT for capturing THM‐induced resistivity changes, though challenges remain in upscaling and quantitative analysis. This study evaluates laboratory test capabilities and proposes future improvements for understanding THM‐induced resistivity responses. A conceptual framework for ERT implementation in field‐scale monitoring is presented, synthesizing findings from both scales and exploring how ERT data can inform long‐term modeling and reduce prediction uncertainties. Overall, this ERT‐based framework offers a robust method for monitoring bentonite buffers, aiding in early issue detection and supporting the safe long‐term disposal of radioactive waste in geological repositories, while highlighting the need for future development. Plain Language Summary Bentonite clay is crucial in engineered barrier systems (EBS) for containing high‐level radioactive waste due to its ability to absorb water, swell, seal and remain stable under high temperatures. When bentonite absorbs water and heats up from radioactive decay, it experiences complex changes in its physical and mechanical properties. Understanding these changes is important for ensuring the long‐term safety and effectiveness of EBS. This study used Electrical Resistivity Tomography (ERT), a non‐invasive method that measures electrical conductivity to monitor these changes during laboratory experiments. The ERT data revealed significant variations in resistivity corresponding to changes in water content, temperature, and density, providing detailed spatial and temporal insights into the behavior of bentonite. These findings enhance our ability to predict the long‐term performance of bentonite barriers, ensuring the safe containment of radioactive waste. By improving our understanding of bentonite's behavior, this research supports the development of more reliable and effective barrier systems for radioactive waste disposal, protecting the environment and public health. Key Points ERT monitoring was employed to capture resistivity changes in bentonite during controlled heating and hydration experiments, providing insights into THM processes ERT data reveal significant resistivity changes correlated with water content, temperature, and mechanical effects, enhancing the understanding of THM dynamics in bentonite This study explores the potential of the framework for application in field‐scale EBS monitoring, emphasizing the need for integrating additional geophysical methods for comprehensive subsurface imaging

Chen, Hang↗

Status update of the BWR cask simulator

The performance of commercial nuclear spent fuel dry storage casks are typically evaluated through detailed numerical analysis of the system's thermal performance. These modeling efforts are performed by the vendor to demonstrate the performance and regulatory compliance and are independently verified by the Nuclear Regulatory Commission (NRC). Carefully measured data sets generated from testing of full sized casks or smaller cask analogs are widely recognized as vital for validating these models. Numerous studies have been previously conducted. Recent advances in dry storage cask designs have moved the storage location from above ground to below ground and significantly increased the maximum thermal load allowed in a cask in part by increasing the canister helium pressure. Previous cask performance validation testing did not capture these parameters. The purpose of the investigation described in this report is to produce a data set that can be used to test the validity of the assumptions associated with the calculations presently used to determine steady-state cladding temperatures in modern dry casks. These modern cask designs utilize elevated helium pressure in the sealed canister or are intended for subsurface storage. The BWR cask simulator (BCS) has been designed in detail for both the above ground and below ground venting configurations. The pressure vessel representing the canister has been designed, fabricated, and pressure tested for a maximum allowable pressure (MAWP) rating of 24 bar at 400 C. An existing electrically heated but otherwise prototypic BWR Incoloy-clad test assembly is being deployed inside of a representative storage basket and cylindrical pressure vessel that represents the canister. The symmetric single assembly geometry with well-controlled boundary conditions simplifies interpretation of results. Various configurations of outer concentric ducting will be used to mimic conditions for above and below ground storage configurations of vertical, dry cask systems with canisters. Radial and axial temperature profiles will be measured for a wide range of decay power and helium cask pressures. Of particular interest is the evaluation of the effect of increased helium pressure on heat load and the effect of simulated wind on a simplified below ground vent configuration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

U(VI) reduction to mononuclear U(VI) by desulfitobacterium spp.

The bioreduction of U(VI) to U(IV) affects uranium mobility and fate in contaminated subsurface environments and is best understood in Gram-negative model organisms such as Geobacter and Shewanella spp. This study demonstrates that U(VI) reduction is a common trait of Gram-positive Desulfitobacterium spp. Five different Desulfitobacterium isolates reduced 100 {mu}M U(VI) to U(IV) in <10 days, whereas U(VI) remained soluble in abiotic and heat-killed controls. U(VI) reduction in live cultures was confirmed using X-ray absorption near-edge structure (XANES) analysis. Interestingly, although bioreduction of U(VI) is almost always reported to yield the uraninite mineral (UO{sub 2}), extended X-ray absorption fine structure (EXAFS) analysis demonstrated that the U(IV) produced in the Desulfitobacterium cultures was not UO{sub 2}. The EXAFS data indicated that the U(IV) product was a phase or mineral composed of mononuclear U(IV) atoms closely surrounded by light element shells. This atomic arrangement likely results from inner-sphere bonds between U(IV) and C/N/O- or P/S-containing ligands, such as carbonate or phosphate. The formation of a distinct U(IV) phase warrants further study because the characteristics of the reduced material affect uranium stability and fate in the contaminated subsurface.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Data, figures, animations, and scripts associated with the manuscript "Integrated Effects of Site Hydrology and Vegetation on Exchange Fluxes and Carbon Cycling at the Coastal Terrestrial Aquatic Interface"

This package contains the data, figures, animations, and scripts used in "Integrated Effects of Site Hydrology and Vegetation on Exchange Fluxes and Carbon Cycling at the Coastal Terrestrial Aquatic Interface" (Li et al., 2023). This study examines the interactions between soil, vegetation and hydrologic conditions in coastal areas, with a focus on the Chesapeake Bay region. The researchers used a mechanistic model called ATS-PFLOTRAN to explore how these interactions affect exchange process in different regions and the carbon/nitrogen cycle across the terrestrial-aquatic interface (TAI). Simulation scenarios isolate the effects of control factors and reaction constants derived from laboratory experiments. The results show a carbon cycle "hot zone" in coastal wetlands and in the transition zone between wetlands and uplands. Transpiration enhances fluxes between the surface and subsurface domains and increases dissolved oxygen in TAI. The decomposition of leaf-derived organic carbon provides an additional source of carbon for aerobic respiration and denitrification in the TAI. Microbial activity plays a key role in controlling redox conditions and their variability. This modeling study improves the understanding of complex TAI interactions and facilitates the representation of coastal ecosystems in larger-scale Earth system models.Several files can be found from this data package.1. Readme,md: This file describe the Title, Target Journal, Target submission date, Co-author, Science Questions, Hypotheses, Key words, Key message, Model and Data, Repo Structure. The user can read this file first and then go to details.2. mesh.zip: This file contains the mesh file for simulation cases. 3. Figure.zip: This file contains figures used in the manuscript . 4. animation.zip: This file contains animations used in the manuscript . 5. Data.zip: This file contains all required input data, such as concentration and flow boundaries. Also, it contains the DEM and processes results on area fraction. 6. Simulation_setup_and_results.zip: This file contains setup of cases used in the manuscript . The result files are too large, if you need that data, please contact to the Author. 7. notebooks.zip: This file contains the Jupyter notebooks for performing sensitivity analysis and other pre-process and post-process analyses.

54 ENVIRONMENTAL SCIENCES↗

Impacts of Topography‐Driven Water Redistribution on Terrestrial Water Storage Change in California Through Ecosystem Responses

Abstract Lateral subsurface flow plays an essential role in sustaining the terrestrial ecosystem, but it is not explicitly represented in most Earth System Models. In this study, we implemented an explicit lateral saturated flow model into the E3SM land model (ELM). The model explicitly describes lateral flow in the saturated zone by representing, for each model grid, an idealized hillslope consisting of five hydrologically connected soil columns. We conducted three model experiments driven by 0.125° atmospheric forcing data during 1980–2015 over California using models of the default ELM, a modified version of ELM to enhance infiltration, and the model with the lateral saturated flow model. The simulated runoff, evapotranspiration, and terrestrial water storage anomaly (TWSA) from the three simulations were evaluated against available observations, and the model explicitly representing lateral flow performs best. The new model produces greater gridcell‐averaged evapotranspiration especially over the mountainous regions with moderate relief and seasonally dry climates. Most importantly, it improves the modeled seasonal variations, interannual variabilities, and the recent decadal decline of TWSA. Many of these improvements can be attributed to the enhanced ecosystem resilience to droughts as demonstrated by transpiration increases caused by lateral flow. Model sensitivity experiments suggest that subsurface runoff is most sensitive to the ratio between horizontal and vertical saturated hydraulic conductivity, followed by hillslope planforms (convergent, divergent, and uniform), number of columns, and lower boundary conditions. Future work should effectively characterize hillslopes in global models and explore the long‐term influences of lateral water movement on modeled biogeochemical cycle.

54 ENVIRONMENTAL SCIENCES↗

Kinetics of calcite precipitation by ureolytic bacteria under aerobic and anaerobic conditions

The kinetics of urea hydrolysis (ureolysis) and induced calcium carbonate(CaCO 3 ) precipitation for engineering use in the subsurface was investigated under aerobic conditions using Sporosarcina pasteurii (ATCC strain 11859) as well as Bacillus sphaericus strains 21776 and 21787. All bacterial strains showed ureolytic activity inducing CaCO 3 precipitation aerobically. Rate constants not normalized to biomass demonstrated slightly higher-rate coefficients for both ureolysis (k urea ) and CaCO 3 precipitation (k precip ) for B. sphaericus 21776 (k urea =0.10±0.03 h -1 , k precip =0.60±0.34 h -1 ) compared to S. pasteurii (k urea =0.07±0.02 h -1 , k precip =0.25±0.02 h -1 ), though these differences were not statistically significantly different. B. sphaericus 21787 showed little ureolytic activity but was still capable of inducing some CaCO 3 precipitation. Cell growth appeared to be inhibited during the period of CaCO 3 precipitation. Transmission electron microscopy (TEM) images suggest this is due to the encasement of cells and was reflected in lower k urea values observed in the presence of dissolved Ca. However, biomass regrowth could be observed after CaCO 3 precipitation ceased, which suggests that ureolysis-induced CaCO 3 precipitation is not necessarily lethal for the entire population. The kinetics of ureolysis and CaCO 3 precipitation with S. pasteurii was further analyzed under anaerobic conditions. Rate coefficients obtained in anaerobic environments were comparable to those under aerobic conditions; however, no cell growth was observed under anaerobic conditions with $NO_3^-,SO_4^{2-}$ or Fe 3+ as potential terminal electron acceptors. These data suggest that the initial rates of ureolysis and ureolysis-induced CaCO 3 precipitation are not significantly affected by the absence of oxygen but that long-term ureolytic activity might require the addition of suitable electron acceptors. Variations in the ureolytic capabilities and associated rates of CaCO 3 precipitation between strains must be fully considered in subsurface engineering strategies that utilize microbial amendments.

58 GEOSCIENCES↗

Recent advances in integrated hydrologic models: Integration of new domains

Over the past several decades, hydrologic models have advanced from independent models of the surface and subsurface to integrated models that can capture the terrestrial hydrologic cycle within one framework. In recent years, these coupled frameworks have seen the inclusion of biogeochemical processes, ecohydrology, sedimentation and erosion, cold region hydrology, anthropogenic activities, and atmospheric processes. This expansion is the result of increased computational, data, and modeling capabilities and capacities, as well as improved understanding of the processes that drive these integrated systems. Here, in this study, we review these recent advances to integrate new processes and systems into existing terrestrial hydrologic models and highlight the significant challenges and opportunities that remain. We identify that with so many models currently available and in development, selecting the most appropriate model is difficult, and we suggest a path for new or novice modelers to find the most appropriate code based on their needs. In addition, data required to parameterize and calibrate these models can often constrain their applicability and usefulness. However, advances in environmental sensors and measurement technology, in addition to data assimilation of non-traditional data (e.g. remote sensing, qualitative data) are providing new ways of addressing this issue. As we expand hydrologic models to integrate more processes and systems, our computational demands also increase. Recent and emerging advances in computational platforms, including cloud and quantum computing, in addition to the use of machine learning to capture some processes, will continue to support the use of increasingly larger and more complex, process-based models. Finally, we highlight that it is critical to develop state-of-the-science models that are accessible to all model users, not just those applied for research and development. We encourage continued development of diverse modeling platforms, considering the user needs, data availability, and computational resources.

54 ENVIRONMENTAL SCIENCES↗

Changes in soil water content and lateral flow exert large effects on soil thermal dynamics across Alaskan landscapes

Both lateral surface and subsurface water flow affect soil moisture dynamics, yet most land surface models only solve subsurface water movement vertically. Here, we use a 3D ecosystem model that considers both land surface and subsurface hydrologic processes to simulate soil moisture, which is then used to drive a 1-D vertical soil thermal model to simulate the soil moisture effects on soil thermal dynamics in central Alaska. Our coupled model improves soil temperature (ST) estimates by 43.5% in comparison with observational data. Soil moisture has little effect on ST during the wet season (-1.5%) and a substantial influence during the dry season (60%). Spatially, water lateral flow has significant impacts on both soil moisture and ST, causing model estimates for thawed areas in the transition season to increase by ~10% in the study area. Our results highlight the importance of considering dynamical soil moisture, as well as lateral flow effects, on soil thermal dynamics in permafrost regions.

54 ENVIRONMENTAL SCIENCES↗

Corrective Action Decision Document/Corrective Action Plan for Corrective Action Unit 413: Clean Slate II Plutonium Dispersion (TTR) Tonopah Test Range, Nevada. Revision 0

This Corrective Action Decision Document/Corrective Action Plan provides the rationale and supporting information for the selection and implementation of corrective actions at Corrective Action Unit (CAU) 413, Clean Slate II Plutonium Dispersion (TTR). CAU 413 is located on the Tonopah Test Range and includes one corrective action site, TA-23-02CS. CAU 413 consists of the release of radionuclides to the surface and shallow subsurface from the Clean Slate II (CSII) storage–transportation test conducted on May 31, 1963. The CSII test was a non-nuclear detonation of a nuclear device located inside a concrete bunker covered with 2 feet of soil. To facilitate site investigation and the evaluation of data quality objectives decisions, the releases at CAU 413 were divided into seven study groups: 1 Undisturbed Areas 2 Disturbed Areas 3 Sedimentation Areas 4 Former Staging Area 5 Buried Debris 6 Potential Source Material 7 Soil Mounds Corrective action investigation (CAI) activities, as set forth in the CAU 413 Corrective Action Investigation Plan, were performed from June 2015 through May 2016. Radionuclides detected in samples collected during the CAI were used to estimate total effective dose using the Construction Worker exposure scenario. Corrective action was required for areas where total effective dose exceeded, or was assumed to exceed, the radiological final action level (FAL) of 25 millirem per year. The results of the CAI and the assumptions made in the data quality objectives resulted in the following conclusions: The FAL is exceeded in surface soil in SG1, Undisturbed Areas; The FAL is assumed to be exceeded in SG5, Buried Debris, where contaminated debris and soil were buried after the CSII test; The FAL is not exceeded at SG2, SG3, SG4, SG6, or SG7. Because the FAL is exceeded at CAU 413, corrective action is required and corrective action alternatives (CAAs) must be evaluated. For CAU 413, three CAAs were evaluated: no further action, clean closure, and closure in place. The CAAs were evaluated on technical merit focusing on performance, reliability, feasibility, safety, and cost. Based on the evaluation of analytical data from the CAI, review of future and current operations at CAU 413, and the detailed and comparative analysis of CAAs, clean closure was selected as the preferred CAA for CAU 413 by the U.S. Air Force, Nevada Division of Environmental Protection, and U.S. Department of Energy at the CAA meeting held on August 24, 2016.

54 ENVIRONMENTAL SCIENCES↗

Near-Field Imaging of Shallow Chemical Detonations in Granite using Change Detection Methods of Borehole Seismic Data

As part of the Source Physics Experiment (SPE) Phase I shallow chemical detonation series, multiple surface and borehole active-source seismic campaigns were executed to perform high resolution imaging of seismic velocity changes in the granitic substrate. Cross-correlation data processing methods were implemented to efficiently and robustly perform semi-automated change detection of first-arrival times between campaigns. The change detection algorithm updates the arrival times, and consequently the velocity model, of each campaign. The resulting tomographic imagery reveals the evolution of the subsurface velocity structure as the detonations progressed.

42 ENGINEERING↗

Near-Field Imaging of Shallow Chemical Detonations in Granite using Change Detection Methods of Borehole Seismic Data

As part of the Source Physics Experiment (SPE) Phase I shallow chemical detonation series, multiple surface and borehole active-source seismic campaigns were executed to perform high-resolution imaging of seismic velocity changes in the granitic substrate. Cross-correlation data processing methods were implemented to efficiently and robustly perform semi-automated change detection of first-arrival times between campaigns. The change detection algorithm updates the arrival times, and consequently the velocity model, of each campaign. The resulting tomographic imagery reveals the evolution of the subsurface velocity structure as the detonations progressed.

42 ENGINEERING↗

Corrective Action Decision Document/Closure Report for Corrective Action Unit 371: Johnnie Boy Crater and Pin Stripe Nevada Test Site, Nevada, Revision 0 with ROTC 1

This Corrective Action Decision Document/Closure Report has been prepared for Corrective Action Unit 371, Johnnie Boy Crater and Pin Stripe, located within Areas 11 and 18 at the Nevada Test Site, Nevada, in accordance with the Federal Facility Agreement and Consent Order (FFACO). Corrective Action Unit (CAU) 371 comprises two corrective action sites (CASs): • 11-23-05, Pin Stripe Contamination Area • 18-45-01, U-18j-2 Crater (Johnnie Boy) The purpose of this Corrective Action Decision Document/Closure Report is to provide justification and documentation supporting the recommendation that no further corrective action is needed for CAU 371 based on the implementation of corrective actions. The corrective action of closure in place with administrative controls was implemented at both CASs. Corrective action investigation (CAI) activities were performed from January 8, 2009, through February 16, 2010, as set forth in the Corrective Action Investigation Plan for Corrective Action Unit 371: Johnnie Boy Crater and Pin Stripe. The approach for the CAI was divided into two facets: investigation of the primary release of radionuclides and investigation of other releases (migration in washes and chemical releases). The purpose of the CAI was to fulfill data needs as defined during the data quality objective (DQO) process. The CAU 371 dataset of investigation results was evaluated based on the data quality indicator parameters. This evaluation demonstrated the dataset is acceptable for use in fulfilling the DQO data needs. Analytes detected during the CAI were evaluated against final action levels (FALs) established in this document. Radiological doses exceeding the FAL of 25 millirem per year were not found to be present in the surface soil. However, it was assumed that radionuclides are present in subsurface media within the Johnnie Boy crater and the fissure at Pin Stripe. Due to the assumption of radiological dose exceeding the FAL, corrective actions were undertaken that consist of implementing a use restriction and posting warning signs at each site. These use restrictions were recorded in the FFACO database; the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Facility Information Management System; and the NNSA/NSO CAU/CAS files. Therefore, NNSA/NSO provides the following recommendations: • No further corrective actions are necessary for CAU 371. • A Notice of Completion to NNSA/NSO is requested from the Nevada Division of Environmental Protection for closure of CAU 371. • Corrective Action Unit 371 should be moved from Appendix III to Appendix IV of the FFACO.

54 ENVIRONMENTAL SCIENCES↗

Total Dissolved Nitrogen and Ammonia Data for the East River Watershed, Colorado (2015-2025)

This data package contains mean values for total dissolved nitrogen (TDN) and ammonia concentrations for water samples taken from the East River Watershed in Colorado. The East River is part of the Watershed Function Scientific Focus Area (WFSFA) located in the Upper Colorado River Basin, United States. TDN was analyzed using a Shimadzu Total Nitrogen Module (TNM-1) combined with the TOC-VCSH analyzer (Shimadzu Corporation, Japan). TNM-1 is a non-specific measurement of total nitrogen (TN). All nitrogen species in samples are combusted to nitrogen monoxide and nitrogen dioxide, then reacted with ozone to form an excited state of nitrogen dioxide. Upon returning to ground state, light energy is emitted. Then, TDN is measured using a chemiluminescence detector. Ammonia was determined using a Lachat's QuikChem 8500 Series 2 Flow Injection Analysis System (LACHAT Instruments, QuckChem 8500 series 2, Automated Ion Analyzer, Loveland, Colorado). When ammonia in water samples is heated (60 degrees C) with salicylate and hypochlorite in an alkaline phosphate buffer, an emerald green color is produced which is proportional to the ammonia concentration. The color is intensified by the addition of nitroprusside. Ethylenediaminetetraacetic acid (EDTA) is added to the buffer to prevent the interference of metal ions (Ca, Mg, and Fe etc.). Ammonia-N is then determined by LACHAT flow injection and a colorimetric assay at an absorbance wavelength 660 nm. (Reference: LACHAT Instruments: QuickChem Method 90-107-06-3-A, Determination of Ammonia by Flow Injection Analysis (High Throughput, Salicylate Method/DCIC) (Multi Matrix method). Written by Lynn Egan (Application group), February 08, 2011.) All files are labeled by location and variable, and data reported are the mean values upon replicate measurements. All samples were analyzed under a rigorous quality assurance and quality control (QA/QC) process as detailed in the methods. This data package contains (1) a zip file (tdn_ammonia_data_2015-2025.zip) containing a total of 299 files: 298 data files of ammonia and TDN data from across the Lawrence Berkeley National Laboratory (LBNL) Watershed Function Scientific Focus Area (SFA) which is reported in .csv files per location and a locations.csv (1 file) with latitude and longitude for each location; (2) a file-level metadata (v7_20260901_flmd.csv) file that lists each file contained in the dataset with associated metadata; (3) a data dictionary (v7_20260901_dd.csv) file that contains terms/column_headers used throughout the files along with a definition, units, and data type; (4) PDF and docx files for the determination of Method Detection Limits (MDLs) for TDN data, which has been updated in 2026-08; and (5) PDF and docx files for the detemination of Method Detection Limits (MDLs) for Ammonia and the Interferences by LACHAT Flow Injection Analysis. Missing values within the anion data files are noted as either "-9999" or "0.0" for not detectable (N.D.) data. There are a total of 105 locations containing TDN and Ammonia-N data. Update 2020-10-07: Updated the data files to remove times from the timestamps, so that only dates remain. The data values have not changed. Update 2021-04-11: Added Determination of Method Detection Limits (MDLs) for DIC, NPOC and TDN Analyses and Determination of Method Detection Limit for Ammonia and the Interferences by LACHAT Flow Injection Analysis documents, which can be accessed as PDFs or with Microsoft Word.Update on 6/10/2022: versioned updates to this dataset was made along with these changes: (1) updated total dissolved nitrogen and ammonia data for all locations up to 2021-12-31, (2) removal of units from column headers in datafiles, (3) added row underneath headers to contain units of variables, (4) restructure of units to comply with CSV reporting format requirements, (5) added -9999 for empty numerical cells, and (6) the addition of the file-level metadata (flmd.csv) and data dictionary (dd.csv) were added to comply with the File-Level Metadata Reporting Format. Update on 2022-09-09: Updates were made to reporting format specific files (file-level metadata and data dictionary) to correct swapped file names, add additional details on metadata descriptions on both files, add a header_row column to enable parsing, and add version number and date to file names (v2_20220909_flmd.csv and v2_20220909_dd.csv). Update on 2022-12-20: Updates were made to both the data files and reporting format specific files. Units were listed incorrectly, but have been fixed to reflect correct units (ug/L). File level metadata (flmd) and data dictionary (dd) files were updated to reflect the updated versions of these files. Available data was added up until 2022-06-01. Update on 2023-08-08: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-01-05. The file level metadata and data dictionary files were updated to reflect the additional data added. Update on 2024-03-11: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-10-27. Further, revisions to the data files were made to remove incorrect data points (from 1970 and 2001). The reporting format specific files were updated to reflect the additional data added. Revised versions of the PDF and docx files for determination of MDLs for TDN were added to replace previous versions. Update on 2025-05-15: Updates were made to both the data files and reporting format specific files. New available TDN and Ammonia-N data was added, up until the end of WY2024 (September 30, 2024). International Generic Sample Numbers (IGSNs), when registered, were added to the data files. The reporting format specific files were updated to reflect the additional data added. Update on 2026-09-01: Updates were made to both the data files and reporting format specific files. New available TDN and Ammonia-N data was added, up until the end of WY2025 (September 30, 2025). Updated versions, as of 2026-08-10, of the PDF and docx files for determination of MDLs for TDN data were added to this dataset.

54 ENVIRONMENTAL SCIENCES↗

Anion Data for the East River Watershed, Colorado (2014-2025)

The anion data for the East River Watershed, Colorado, consist of fluoride, chloride, sulfate, nitrate, and phosphate concentrations collected at multiple, long-term monitoring sites that include stream, groundwater, and spring sampling locations. These locations represent important and/or unique end-member locations for which solute concentrations can be diagnostic of the connection between terrestrial and aquatic systems. Such locations include drainages underlined entirely or largely by shale bedrock, land covered dominated by conifers, aspens, or meadows, and drainages impacted by historic mining activity and the presence of naturally mineralized rock. Developing a long-term record of solute concentrations from a diversity of environments is a critical component of quantifying the impacts of both climate change and discrete climate perturbations, such as drought, forest mortality, and wildfire, on the riverine export of multiple anionic species. Such data may be combined with stream gauging stations co-located at each monitoring site to directly quantify the seasonal and annual mass flux of these anionic species out of the watershed. This data package contains (1) a zip file (anion_data_2014_2025.zip) containing a total of 386 files: 387 data files of anion data from across the Lawrence Berkeley National Laboratory (LBNL) Watershed Function Scientific Focus Area (SFA) which is reported in .csv files per location and a locations.csv (1 file) with latitude and longitude for each location; (2) a file-level metadata (v7_20260901_flmd.csv) file that lists each file contained in the dataset with associated metadata; (3) a data dictionary (v7_20260901_dd.csv) file that contains terms/column_headers used throughout the files along with a definition, units, and data type; and (4) a anion MDL fact sheet (anion_MDLs_202608 in PDF and docx formats). Missing values within the anion data files are noted as either "-9999" or "0.0" for not detectable (N.D.) data. There are a total of 47 locations containing anion data. Update on 2022-06-10: versioned updates to this dataset was made along with these changes: (1) updated anion data for all locations up to 2021-12-31, (2) removal of units from column headers in datafiles, (3) added row underneath headers to contain units of variables, (4) restructure of units to comply with CSV reporting format requirements, and (5) the addition of the file-level metadata (flmd.csv) and data dictionary (dd.csv) were added to comply with the File-Level Metadata Reporting Format. Update on 2022-09-09: Updates were made to reporting format specific files (file-level metadata and data dictionary) to correct swapped file names, add additional details on metadata descriptions on both files, add a header_row column to enable parsing, and add version number and date to file names (v2_20220909_flmd.csv and v2_20220909_dd.csv). Update on 2022-12-20: Updates were made to both the data files and reporting format specific files. Conversion issues affecting ER-PLM locations for anion data was resolved for the data files. Additionally, the flmd and dd files were updated to reflect the updated versions of these files. Available data was added up until 2022-03-14. Update on 2023-08-08: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-05-19. The file level metadata and data dictionary files were updated to reflect the additional data added. Update on 2024-03-11: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-09-11. Further, revisions to the data files were made to remove incorrect data points (from 1970 and 2001). The reporting format specific files were updated to reflect the additional data added. Update on 2025-05-15: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until the end of WY2024 (September 30, 2024). International Generic Sample Numbers (IGSNs), when registered, were added to the data files. The reporting format specific files were updated to reflect the additional data added. Update on 2026-09-01: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until the end of WY2025 (September 30, 2025). An anion MDL document was included in this update.

54 ENVIRONMENTAL SCIENCES↗

Stable Water Isotope Data for the East River Watershed, Colorado (2014-2025)

The stable water isotope data for the East River Watershed, Colorado, consists of delta2H (hydrogen) and delta18O (oxygen) values from samples collected at multiple, long-term monitoring sites including streams, groundwater wells, springs, and a precipitation collector used to establish a local meteoric water line (LMWL) for the watershed. These locations represent important and/or unique end-member locations for which stable isotope values can be diagnostic of the connection between precipitation inputs as snow and rain and riverine export. Such locations include drainages underline entirely or largely by shale bedrock, land covered dominated by conifers, aspens, or meadows, and drainages impacted by historic mining activity and the presence of naturally mineralized rock. Developing a long-term record of water isotope values from a diversity of environments is a critical component of quantifying the impacts of both climate change and discrete climate perturbations, such as drought, forest mortality, and wildfire, on water export. Such data may be combined with stream gaging stations co-located at each surface water monitoring site to relate seasonal variations in water export to their stable isotopic signature. Data for liquid water delta2H and delta18O values are reported in units of parts per thousand (per-mil; ‰). This data package contains (1) a zip file (isotope_data_2014-2025.zip) containing a total of 95 files: 96 data files of isotope data from across the Lawrence Berkeley National Laboratory (LBNL) Watershed Function Scientific Focus Area (SFA) which is reported in .csv files per location and a locations.csv (1 file) with latitude and longitude for each location; (2) a file-level metadata (v6_20260901_flmd.csv) file that lists each file contained in the dataset with associated metadata; and (3) a data dictionary (v6_20260901_dd.csv) file that contains terms/column_headers used throughout the files along with a definition, units, and data type. Missing values within the anion data files are noted as either "-9999" or "0.0" for not detectable (N.D.) data. There are a total of 43 locations containing isotope data. Update on 2022-06-10: versioned updates to this dataset was made along with these changes: (1) updated isotope data for all locations up to 2021-12-31 and (2) the addition of the file-level metadata (flmd.csv) and data dictionary (dd.csv) were added to comply with the File-Level Metadata Reporting Format. Update on 2022-09-09: Updates were made to reporting format specific files (file-level metadata and data dictionary) to correct swapped file names, add additional details on metadata descriptions on both files, add a header_row column to enable parsing, and add version number and date to file names (v2_20220909_flmd.csv and v2_20220909_dd.csv). Update on 2023-08-08: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2023-03-13. The file level metadata and data dictionary files were updated to reflect the additional data added. Update on 2024-03-11: Updates were made to both the data files and reporting format specific files. New available anion data was added, up until 2024-02-19. Further, revisions to the data files were made to remove incorrect data points (from 1970 and 2001). The reporting format specific files were updated to reflect the additional data added. Update on 2025-05-15: Updates were made to both the data files and reporting format specific files. New available isotope data was added, up until the end of WY2024 (September 30, 2024). International Generic Sample Numbers (IGSNs), when registered, were added to the data files. The reporting format specific files were updated to reflect the additional data added. Update on 2026-09-01: Updates were made to both the data files and reporting format specific files. New available isotope data was added, up until the end of WY2025 (September 30, 2025).

54 ENVIRONMENTAL SCIENCES↗

Transportability of exogenous microbial community correlates with interwell connectivity in deep aquifers

Subsurface resource engineering operations often utilize continuous injection of externally-sourced water into geological reservoirs for formation pressure maintenance, resource recovery or energy/waste storage. Such injected water generally contains naturally occurring microbes. Little is known, however, about how the injectate microbes transport through geological media as a community, how such transportability is affected by injector-producer connectivity, and whether such knowledge can be utilized for flowpath characterization. In this study, we analyzed daily-to-weekly timeseries microbial community data from the injected- and produced-fluids of a ten-month flow test at a deep, well-characterized engineered aquifer. We found that the injectate microbial community was distinct from the indigenous community at the amplicon sequence variant (ASV) level, and that the transportability of injectate community towards a given producer, quantified by an “nASV-Overlap” metric we propose, had strong and significant positive correlation with known injector-producer connectivities at our site. This suggests that the better the connectivity, the higher the probability for more injectate species to flow through the interwell region and arrive at a producer. Because interwell connectivity is an important yet usually unknown parameter in subsurface resource engineering, such correlation in turn points to nASV-Overlap as a useful indicator of interwell connectivity for aquifer characterization and long-term monitoring. Based on our findings, an nASV-Overlap-based microbial tracing approach was developed for characterizing and monitoring the relative connectivities across multiple producers with a given injector. A side-by-side comparison between the new nASV-Overlap approach and traditional artificial tracer methods is presented, and their respective strengths and limitations are discussed.

Deep biosphere↗

An ensemble of ocean reanalyses for 1815-2013 with sparse observational input

This paper describes a new eight-member ensemble of ocean reanalyses spanning nearly 200 years from 1815 to 2013 generated using the Simple Ocean Data Assimilation system with sparse observational input (SODAsi) to explore long-term changes in the oceans. The eight ensemble members assimilate surface temperature observations and use surface boundary conditions from an atmospheric reanalysis that is loosely coupled to the ocean reanalysis. In this work, both surface and subsurface quantities, such as dynamic height and heat content, show a broad spectrum of variability. Surface temperature trends from 1815 to 2013 are positive in most regions, with some important exceptions; the central Tropical Pacific, around Antarctica, and in the Gulf Stream and Kuroshio extension regions all show cooling trends. A near-global average shows warming of about 0.8°C over the full period, with most of the warming occurring after 1920. There is pronounced multidecadal variability in both the midlatitude and tropical oceans. In the North Atlantic Ocean, temperature variability is highly correlated with the meridional overturning stream function, with the largest correlation occurring when the stream function is advanced by 9 years. Trends of upper ocean heat content and dynamic height from the 1950s onward compare well with previously published values. Globally averaged heat content of the upper 700 m shows a nearly linear rise after the 1920s, requiring a net downward surface heat flux increase of 0.47 W m -2 into the ocean. This is close to published estimates of the increased flux required to explain the heat content increase from 1971 to 2010.

54 ENVIRONMENTAL SCIENCES↗

The influence of physical and algorithmic factors on simulated far-field waveforms and source–time functions of underground explosions using unsupervised machine learning

SUMMARY Characterizing explosion sources and differentiating between earthquake and underground explosions using distributed seismic networks becomes non-trivial when explosions are detonated in cavities or heterogeneous ground material. Moreover, there is little understanding of how changes in subsurface physical properties affect the far-field waveforms we record and use to infer information about the source. Simulations of underground explosions and the resultant ground motions can be a powerful tool to systematically explore how different subsurface properties affect far-field waveform features, but there are added variables that arise from how we choose to model the explosions that can confound interpretation. To assess how both subsurface properties and algorithmic choices affect the seismic wavefield and the estimated source functions, we ran a series of 2-D axisymmetric non-linear numerical explosion experiments and wave propagation simulations that explore a wide array of parameters. We then inverted the synthetic far-field waveform data using a linear inversion scheme to estimate source–time functions (STFs) for each simulation case. We applied principal component analysis (PCA), an unsupervised machine learning method, to both the far-field waveforms and STFs to identify the most important factors that control variance in the waveform data and differences between cases. For the far-field waveforms, the largest variance occurs in the shallower radial receiver channels in the 0–50 Hz frequency band. For the STFs, both peak amplitude and rise times across different frequencies contribute to the variance. We find that the ground equation of state (i.e. lithology and rheology) and the explosion emplacement conditions (i.e. tamped versus cavity) have the greatest effect on the variance of the far-field waveforms and STFs, with the ground yield strength and fracture pressure being secondary factors. Differences in the PCA results between the far-field waveforms and STFs could possibly be due to near-field non-linearities of the source that are not accounted for in the estimation of STFs and could be associated with yield strength, fracture pressure, cavity radius and cavity shape parameters. Other algorithmic parameters are found to be less important and cause less variance in both the far-field waveforms and STFs, meaning algorithmic choices in how we model explosions are less important, which is encouraging for the further use of explosion simulations to study how physical Earth properties affect seismic waveform features and estimated STFs.

58 GEOSCIENCES↗