SEARCH · Engineering Papers

Results for “structured liquids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Structural relaxation and crystallization in supercooled water from 170 to 260 K

The structural relaxation and crystallization of deeply supercooled water are investigated in transiently-heated nanoscale water films using infrared spectroscopy for temperatures between 170 and 260 K. For temperatures above ~230 K, the relaxation kinetics can be fit with a simple exponential decay which is characteristic of normal liquids. At lower temperatures, increasingly non-exponential decay is observed indicating the onset of heterogeneous dynamics. Water’s relaxation rate depends on its initial structure with hyper-quenched glassy water (HQW) typically relaxing more quickly than low-density amorphous solid water (LDA). At all temperatures, the relaxation time, trel is faster than the crystallization time, txtal. For HQW, the ratio, txtal/trel, goes through a minimum at ~198 K where it is about 60. The research was designed and supervised by GAK and BDK. LK and WAT conducted the experiments and analyzed the data. LK and GAK wrote the manuscript, with input from all authors.

Kringle, Loni M.↗

DOE OSTI2023

Pressure-induced charge-transfer and structural transition in hexagonal multiferroic HoMnO 3

The structural properties of the hexagonal multiferroic ℎ-HoMnO 3 under high pressure have been explored using synchrotron x-ray diffraction and x-ray absorption spectroscopy in diamond anvil cells. The structure was found to undergo a pressure-induced phase transition at ~24 GPa to a rhombohedrally distorted superstructure, which is isostructural to the oxygen-loaded h-RMnO 3+δ (R = Y,Dy,Ho,Er; δ ≈ 0.28) phases found in the same systems. The driving force behind the phase transition is the highly compressible ab plane which facilitates a gradual charge disproportionation of Mn(III) with pressure. We speculate this stabilizes the spin-liquid phase due to ferromagnetic coupling between neighboring Mn(II)/Mn(IV) and Mn(III). In addition, we demonstrate that the structural behavior is highly susceptible to nonhydrostatic conditions and the choice of pressure medium should be carefully made.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Phase Transition and Liquid-like Superionic Conduction in Ag 2 S

Superionic conductivity in certain polymorphs of Ag 2 S has inspired numerous concepts for materials applications, but the relationship between the structure and the mobility of silver ions remains poorly explored. In this paper, we report ab initio molecular dynamics simulations for low- (acanthite) and high-temperature (argentite) Ag 2 S polymorphs that reveal the dynamical processes, giving rise to the superionic behavior in the latter. Similarities between their sulfur sublattices enable simulations of silver ion diffusivities and pathways on essentially an equal footing. For the higher temperature polymorph, calculated temperature-dependent mean square displacements and activation energies by the nudged elastic band method show good correspondence with expectations from the experiment. In the superionic state, silver atoms diffuse in a liquid-like behavior with no preferred diffusion pathways, within the relatively stable body-centered cubic sulfur framework. Conversely, conduction in acanthite appears to depend more on the mobilities of electronic charge carriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Solution-Processed Temperature-Adaptive Radiative Paint as a Thermal Imaging Sensitizer

Thermography detects mid-infrared radiation from surfaces based on the Stefan-Boltzmann law, mapping surface temperatures and potentially revealing subsurface thermal activity. Recent developments offer an alternative strategy to traditional camera-based improvements: a thermal imaging sensitizer (TIS) coating whose emissivity increases sharply with local temperature, amplifying small thermal variations into high-contrast signals. Existing TIS structures are nanofabricated solid membranes and face significant challenges in fabrication complexity. Here, in this study, we present a solution-processed, liquid form of TIS, termed temperature-adaptive radiative paint (TARP), to address these limitations. TARP offers drastically reduced fabrication costs, scalability to large areas, applicability to curved surfaces, and an extended operating temperature range, while maintaining the function of temperature amplification. Application of TARP enhances small temperature contrast by more than 3 times, substantially improving ambient thermography and enabling broader applications such as detection of structural defects and hot spots in electronic components.

paint↗

DOE OSTI2025

CO 2 in Ionene–Ionic Liquid Composite Membranes

Abstract Ionene – ionic liquid (IL) composites are promising materials for CO 2 separation, yet a molecular‐level understanding of their structure and its impact on CO 2 speciation, solubility, rotation, and diffusivity remains unclear. Herein, using multimodal nuclear magnetic resonance (NMR), time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS), atomic force microscopy (AFM), and molecular dynamics (MD) simulations, we reveal that the composites contain IL‐rich domains extending across hundreds of nanometres within the ionene matrix, and these bicontinuous domains span the entire membrane depth. CO 2 also absorbs into the ionene matrix, with the distribution between two CO 2 species varying with temperature and time. The rotational correlation times of these two species are on the timescale of 0.1 and 1 ns, respectively. As IL content increases, the ionic domains expand, resulting in higher CO 2 solubility due to enhanced molecular dynamics and increased free volume in both ionene backbones and IL‐rich regions. Although CO 2 diffusion in the membranes is an order of magnitude slower than in bulk IL, the activation energy for CO 2 diffusion remains comparable. Ionene‐IL composites represent a promising platform for designing CO 2 separation membranes, offering enhanced CO 2 diffusion and selectivity through IL‐rich domains, and increased CO 2 solubility and mechanical integrity from the ionene matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Carbon nanotube coated metal mesh: Bridging nanoscale and macroscale

A novel hybrid structure has been developed by growing carbon nanotubes (CNTs) on a metal mesh that functions as a literally unlimitedly extendable backbone. This hybrid material structure provides a new approach of extending CNTs’ advantageous properties such as ultrahigh thermal and electrical conductivities, high sensitivity to gases, and distinctive wettability for different liquids with chemical inertness to macroscale—otherwise available only in nano- and microscales. In this feasibility work, CNTs were grown on a Type 316 stainless steel (SS) mesh by self-catalytical chemical vapor deposition (CVD) without the need of an externally added catalyst or catalyst support. For the radially aligned and entangled CNT forest on the SS mesh, the average CNT diameter is around 50 nm, while the length varies from 20 to 25 µm. High-resolution transmission electron microscopy analysis revealed the multiwall structure of the CNTs with >30 rolled-up graphitic sheets. Raman spectra of the CNTs showed a dominant G band, indicating a well-ordered graphitic nanostructure. Being highly hydrophobic with a water contact angle of ∼145° and oleophilic, the CNT-coated SS mesh could be used in fluid separation and organic contaminant removal from water. Moreover, CNTs are recognized for their exceptional thermal conductivity and the CNT-coated mesh offers a supportive structure with directly connected CNTs for efficient heat transfer. Proof of concept has been achieved for the CNT-coated mesh’s potentials as a liquid filter and an thermal interface material (TIM). Specifically, the CNT-coated mesh demonstrated the capability of capturing water from a water-organic mixture with a 100 % efficiency while allowing organic liquids to pass through the filter. Furthermore, when used as a TIM, the CNT-coated mesh reduced the interfacial thermal impedance by >30 %.

Carbon nanotubes (CNTS)↗

DOE OSTI2025

Shock-driven amorphization and melting in Fe 2 O 3

We present measurements on Fe 2⁢ O 3 amorphization and melt under laser-driven shock compression up to 209(10) GPa via time-resolved in situ x-ray diffraction. At 122(3) GPa, a diffuse signal is observed indicating the presence of a noncrystalline phase. Structure factors have been extracted up to 182(6) GPa showing the presence of two well-defined peaks. A rapid change in the intensity ratio of the two peaks is identified between 145(12) and 151(12) GPa, indicative of a phase change. The noncrystalline diffuse scattering is consistent with shock amorphization of Fe 2 ⁢O 3 between 122(3) and 145(12) GPa, followed by an amorphous-to-liquid transition above 151(12) GPa. Upon release, a noncrystalline phase is observed alongside crystalline α–Fe 2⁢ O 3 . The extracted structure factor and pair distribution function of this release phase resemble those reported for Fe 2 ⁢O 3 melt at ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Bacterial Resistance Toward Antimicrobial Ionic Liquids Mediated by Multidrug Efflux Pumps

The effective elimination of foodborne pathogens through cleaning and disinfection measures is of great importance to the food processing industry. As food producers rely heavily on disinfectants to control pathogenic bacteria in their facilities, the increasing spread of tolerant, often even multidrug resistant, strains is of particular concern. In addition to efforts to prevent or at least reduce development and spread of strains resistant to disinfectants and sanitizers, there is an urgent need for new and effective antimicrobials. One new class of promising antimicrobials is ionic liquids (ILs), which have been reported to be effective against resistant strains as they interact with bacterial cells in multiple ways, but investigations of their effectivity against MDR bacteria or specific defense mechanisms are still limited. This study investigates the role of multidrug efflux pumps of the Resistance Nodulation-Division family (RND) on the resistance of bacterial pathogens Escherichia coli and Salmonella enterica serovar Typhimurium toward 10 antimicrobial active ILs. Results reveal that, while known structure–activity relationships (SARs), such as the side-chain effect, were found for all strains, antimicrobial ILs with one elongated alkyl side chain were significantly affected by the RND efflux pump, highlighting the importance of efflux pumps for future IL toxicity studies. In case of antimicrobial ILs with multiple side chains and different cationic head groups, two ILs were identified that were highly active against all investigated strains with little to no effect of the efflux pump. The results obtained in this study for RND efflux pumps can serve as a starting point for identifying and designing antimicrobial ILs as effective biocides against MDR bacteria.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Investigation of the role of hydrogen bonding in ionic liquid-like salts with both N- and S-soft donors

In search of ionic liquids (ILs) with multiple types of soft donor atoms capable of preferentially complexing a range of soft metal ions over harder ions, we investigated structural clues to the role of hydrogen bonding in IL behavior through a series of salts with anions containing both N- and S-donor atoms based on azole thiolates. Reaction of equimolar amounts of triethylamine (Et 3 N) or diisobutylamine (DBA) with 1-phenyl-1H-tetrazole-5-thiol (PhTzSH), 1-methyl-1H-tetrazole-5-thiol (MeTzSH), or 5-methyl-1,3,4-dithiazole-2-thiol (MeDiTSH) yielded [Et 3 NH][MeTzS] (1), a yellow liquid, and the low melting yellow solids [DBAH][MeTzS] (2), [Et 3 NH][PhTzS] (3), [DBAH][PhTzS] (4), [Et 3 NH][MeDiTS] (5), and [DBAH][MeDiTS] (6). Thermal analysis revealed that all of them qualify as ILs with melting points below 100 °C. Single crystal X-ray structure analysis of 2–6 revealed the presence of an extensive H-bonding network that includes the rare N–H$\cdots$S hydrogen bonds in 3, 4, and 6. These weaker interactions appear to significantly influence thermal behavior, where strong bonding leads to higher melting temperatures and lower decomposition points.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

High-throughput small-angle X-ray scattering reveals effective structure factor transitions linked to high-concentration antibody viscosity

High-concentration monoclonal antibody (mAb) formulations are often constrained by elevated viscosity, largely driven by protein–protein interactions, which complicates manufacturing and limits subcutaneous delivery. Early viscosity risk assessment is essential during discovery, yet traditional measurements require large sample volumes, and lack high-throughput capability. Here, we develop a high-throughput small-angle X-ray scattering (SAXS) protocol to detect mAb self-association at dilute concentrations, enabling early predictive insights into high-concentration viscosity. Synchrotron SAXS measurements were conducted for 21 mAbs formulated in a histidine buffer at pH 6.0. An initial subset of 10 mAbs analyzed across 1–150 mg/mL revealed that effective structure factor transitions in the low-q region, indicative of interparticle interactions, consistently emerged below 25 mg/mL. Subsequently, 11 additional mAbs were analyzed at 1–25 mg/mL using automated liquid handling and flow cells to enable high-throughput screening. High-viscosity mAbs exhibited detectable low-q upturns at concentrations ≤10 mg/mL, whereas low-viscosity mAbs showed downturns. A classification criterion based on effective structure factor transitions accurately classified all high- and low-viscosity mAbs at 150 mg/mL, offering a scalable, sample-efficient alternative to conventional methods. These results extend recent findings on the concentration-dependent sensitivity of SAXS to short-range attractions, demonstrating that they can emerge at lower concentrations than previously reported. This study presents the most comprehensive and diverse SAXS dataset for mAbs reported to date within a single formulation, providing a valuable resource for developing and validating coarse-grained models that can more accurately capture intermolecular interactions governing high-concentration solution behavior, thereby enabling rational antibody engineering and improved developability.

36 MATERIALS SCIENCE↗

DOE OSTI2025

X-ray absorption spectroscopy of lanmodulin-derived peptides bound to rare earth elements

A sustainable and robust supply chain of rare earth elements (REEs) is necessary to meet our consumer, national security and clean energy goals. However, current intra-REE separation technologies (e.g. solvent extraction) are costly and carry a heavy environmental burden. Therefore, the development of new aqueous based ligands that are selective for individual REEs will be integral in future REE production systems. To develop these ligands, an understanding of how ligand coordination structure relates to selectivity is imperative. We used X-ray absorption spectroscopy (XAS) to observe the local structure around four lanthanide (Ln) ions (La, Ce, Pr and Nd) complexed by water and several relevant chelating ligands [lanmodulin EF-hand 1 peptides (LanM1), ethylenediaminetetraacetic acid (EDTA), aminotris(methylenephosphonic acid) (ATMP) and citric acid]. To collect these liquid-phase XAS spectra, we developed a new flow cell that prevents bubble interference and beam damage to the samples. In the X-ray absorption near-edge structure (XANES), we observed energy shifts in the white line, white line broadening and differences in the white line intensity of different Ln–ligand complexes between ligands. In the extended X-ray absorption fine structure (EXAFS), we distinguished differences in peak intensity and distance between coordinating ligands. Differences in the local coordination structure between Ln–LanM1 peptide complexes were more subtle compared with the other ligands (La–water, La–EDTA, La–ATMP and La–citric acid complexes). Further XANES and EXAFS studies, in combination with modelling and other techniques, could greatly improve our structural knowledge of how these aqueous ligands bind Ln ions and how they can be used to design more selective ligands for more efficient and sustainable REE separations.

EDTA↗

DOE OSTI2025

Aligning the Induced Anisotropy of Isotropic Nanoparticles with Liquid Crystals

Thermotropic liquid crystals (LCs) present opportunities for synergistic interactions with ligand-functionalized nanoparticles (NPs). Understanding the dynamics and structures of ligand-coated NPs in an anisotropic LC environment allows for better design and control of versatile LC-NP hybrid materials. Here, simulations and experiments yield direct evidence that cyanobiphenyl LCs induce anisotropy in the biphenylalkyl ligand shells of spherical NPs. The ellipsoidal NP aligns with the LC director. Magnetic fields can dictate the directional ordering of mesogens and consequently allow control of the orientation of the nonmagnetic NPs. Further, controlling the alignment and deformation advances the design and engineering of these hybrid nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Low-energy edge signatures of the Kitaev spin liquid

Recent experimental work indicates that the Kitaev spin liquid may be realizable close to zero magnetic field in exfoliated 𝛼−RuCl 3 flakes, thus providing a more versatile setting for studying non-Abelian anyons. Here, we propose a robust nanoscale signature of the Kitaev spin liquid that results from its edge states and manifests in the low-energy spin dynamics. In particular, we highlight a singular peak in the dynamical spin structure factor of a zigzag edge whose energy scales linearly with only one component of the magnetic field. This sharp feature in the local spin dynamics directly reflects the bond-directional Kitaev spin interactions and, more generally, the projective symmetries of the Kitaev spin liquid. In conclusion, we demonstrate that our proposed signature survives in the presence of edge disorder as well as non-Kitaev interactions, and provide detailed guidelines for experimentally observing it using inelastic electron tunneling spectroscopy and color-center relaxometry.

Color centers↗

DOE OSTI2024

The hierarchical structure of organic mixed ionic–electronic conductors and its evolution in water

Polymeric organic mixed ionic–electronic conductors underpin several technologies in which their electrochemical properties are desirable. These properties, however, depend on the microstructure that develops in their aqueous operational environment. We investigated the structure of a model organic mixed ionic–electronic conductor across multiple length scales using cryogenic four-dimensional scanning transmission electron microscopy in both its dry and hydrated states. Four-dimensional scanning transmission electron microscopy allows us to identify the prevalent defects in the polymer crystalline regions and to analyse the liquid crystalline nature of the polymer. The orientation maps of the dry and hydrated polymers show that swelling-induced disorder is mostly localized in discrete regions, thereby largely preserving the liquid crystalline order. Therefore, the liquid crystalline mesostructure makes electronic transport robust to electrolyte ingress. Furthermore, this study demonstrates that cryogenic four-dimensional scanning transmission electron microscopy provides multiscale structural insights into complex, hierarchical structures such as polymeric organic mixed ionic–electronic conductors, even in their hydrated operating state.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Interface Aspects in All‐Solid‐State Li‐Based Batteries Reviewed

Abstract Extensive efforts have been made to improve the Li‐ionic conductivity of solid electrolytes (SE) for developing promising all‐solid‐state Li‐based batteries (ASSB). Recent studies suggest that minimizing the existing interface problems is even more important than maximizing the conductivity of SE. Interfaces are essential in ASSB, and their properties significantly influence the battery performance. Interface problems, arising from both physical and (electro)chemical material properties, can significantly inhibit the transport of electrons and Li‐ions in ASSB. Consequently, interface problems may result in interlayer formation, high impedances, immobilization of moveable Li‐ions, loss of active host sites available to accommodate Li‐ions, and Li‐dendrite formation, all causing significant storage capacity losses and ultimately battery failures. The characteristic differences of interfaces between liquid‐ and solid‐type Li‐based batteries are presented here. Interface types, interlayer origin, physical and chemical structures, properties, time evolution, complex interrelations between various factors, and promising interfacial tailoring approaches are reviewed. Furthermore, recent advances in the interface‐sensitive or depth‐resolved analytical tools that can provide mechanistic insights into the interlayer formation and strategies to tailor the interlayer formation, composition, and properties are discussed.

25 ENERGY STORAGE↗

DOE OSTI2022

Enhanced Catalytic Performance of a Ce/V Oxo Cluster through Confinement in Mesoporous SBA-15

To increase catalytic efficiency, mesoporous supports have been widely applied to immobilize well-defined metal oxide clusters due to their ability to stabilize highly dispersed clusters. Here, for this study, a redox-active heterometallic Ce 12 V 6 -oxo cluster (CeV) was first presynthesized and then incorporated into mesoporous silica, SBA-15, via a straightforward impregnation method. Scanning transmission electron microscopy (STEM) and Fourier transform infrared spectroscopy (FTIR), in concert with scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS), verified the successful introduction of the CeV cluster inside the pore of SBA-15. The 51 V magic angle spinning solid-state nuclear magnetic resonance ( 51 V MAS NMR) spectroscopy and differential pair distribution function (dPDF) analysis confirmed the structural integrity of the CeV cluster inside the SBA-15. The composite was then benchmarked for liquid-phase oxidation of 2-chloroethyl ethyl sulfide (CEES) under mild conditions and gas-phase oxidative dehydrogenation (ODH) of propane under high temperatures (up to 550 °C). The catalytic reactivity results demonstrated 8- and 14-fold increase in turnover frequency (TOF) values of the composite (CeV@10SBA-2) than the bulk CeV cluster under the same conditions for CEES oxidation and ODH, respectively. These results highlight the improved reactivity of the catalytically active CeV cluster as attributed to the higher dispersion of the discrete cluster upon immobilization within the SBA-15 support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Reforming of methane with carbon dioxide over cerium oxide promoted nickel nanoparticles deposited on 4-channel hollow fibers by atomic layer deposition

Ni nanoparticles were deposited on four-channel structured α-Al2O3 hollow fibers by atomic layer deposition (ALD). CeO 2 was loaded by a liquid phase incipient wetness method to promote Ni catalysts for dry reforming of methane. For Ni/Al 2 O 3 prepared by ALD, inactive NiAl2O4 that originated from the Ni ALD process was incompletely reduced. The introduced CeO 2 was found to weaken the NiO–Al 2 O 3 interaction, free NiO from NiO–Al 2 O 3 or NiAl 2 O 4 , and improve the reducibility of NiO. The higher reducibility of NiAl 2 O 4 , tuned by CeO 2 , further activated the catalyst during DRM, because a larger proportion of NiAl 2 O 4 was gradually reduced to metallic nickel by the reaction products. The optimal catalytic performance reached a methane reforming rate of 2410 L h -1 gNi -1 at 850 °C. The CeO 2 promoted catalyst also exhibited an excellent performance after regeneration. In addition, the inhibition effect of CeO 2 on coke formation was observed, due to the enhanced CO 2 dissociative adsorption by CeO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

A twist grain boundary phase in aqueous solutions of the nucleic acid tetramer GTAC

At high concentration, long Watson/Crick (WC) double-helixed DNA forms columnar crystal or liquid crystal phases of linear, parallel duplex chains packed on periodic lattices. This can also be a structural motif of short NA oligomers such as the 5’-GTAC-3’ studied here, which makes four-base WC duplexes having hydrophobic blunt ends. End-to-end aggregation then assembles these duplexes into columns and columnar phases are stabilized, in spite of breaks in the double helix every four bases. But the new degrees of freedom introduced by such breaks also enable opportunities for a more diverse palette of self-assembly modes, producing striking self-assemblies of DNA that would not be achievable with contiguous polymers. These include recently reported three-dimensional (3D) periodic low-density nanoscale networks of GCCG, and the twist grain boundary (TGB) phase presented here. In the TGB, columns of GTAC pairs assemble into monolayer sheets in which the duplex columns are mutually parallel. However, unlike in the columnar crystals, these sheets stack in helical fashion into lamellar arrays in which the column axis of each layer is rotated through a 60° angle with respect to the columns in neighboring layers. This assembly of DNA is unique in that it the fills a 3D volume wherein the major grooves of columns in each layer mutually enter and interlock with the major grooves of columns in neighboring layers. This locking is optimized by small adjustments in structure enabled by the breaks in the duplex backbones.

DNA↗