SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The application of ERTS-1 imagery to the conservation and control of water resources is discussed. The effects of exisiting geology and land use in the water shed area on the hydrologic cycle and the general characteristics of runoff are described. The effects of floods, snowcover, and glaciers are analyzed. The use of ERTS-1 imagery to map surface water and wetland areas to provide rapid inventorying over large regions of water bodies is reported.
The author has identified the following significant results. Three Skylab earth resources passes over Puerto Rico and St. Croix on 6 June and 30 November 1973 and 18 January 1974 resulted in color photography and multispectral photography and scanner imagery. Bathymetric and turbid water features are differentiable by use of the multispectral data. Photography allows mapping of coral reefs, offshore sand deposits, areas of coastal erosion, and patterns of sediment transport. Bottom sediment types could not be differentiated. Patterns of bottom dwelling biologic communities are well portrayed but are difficult to differentiate from bathymetric detail. Effluent discharges and oil slicks are readily detected and are differentiated from other phenomena by the persistence of their images into the longer wavelength multispectral bands.
In the present assessment of the contributions of optical earth resources remote sensing in the 0.4-15.0 micron region, attention is given to underlying principles, applications to scientific disciplines such as geology, hydrology and oceanography, the recent development history of the requisite sensors, and sensor development trends. Development status characterizations are given for thematic mapping, modular optoelectronic multispectral scanning, the telescope/CCD 'SPOT' program of France, the thermal IR multispectral scanner for mineral signature identification, airborne imaging spectrometry, and the Advanced Visible and IR Imaging Spectrometer that is nearing deployment. Technology development trends and the capabilities they portend are projected.
At this writing, Clementine had successfully fulfilled its moon-mapping mission; at this reading it will have also, with continued good fortune, taken a close look at the asteroid Geographos. The thermal design that made all this possible was indeed formidable in many respects, with very high ratios of requirements-to-available resources and performance-to-cost and mass. There was no question that a test verification of this quite unique and complex design was essential, but it had to be squeezed into an unyielding schedule and executed with bare-bones cost and manpower. After describing the thermal control subsystem's features, we report all the drama, close-calls, and cost-cutting, how objectives were achieved under severe handicap but (thankfully) with little management and documentation interference. Topics include the newly refurbished chamber (ready just in time), the reality level of the engineering model, using the analytical thermal model, the manner of environment simulation, the hand-scratched film heaters, functioning of all three types of heat pipes (but not all heat pipes), and the BMDO sensors' checkout through the chamber window. Test results revealed some surprises and much valuable data, resulting in thermal model and flight hardware refinements. We conclude with the level of correlation between predictions and both test temperatures and flight telemetry.
Under NASA instrument development programs (PIDDP 2000-2002, MIPD 2003-2005, ESR and T, 2005) we have been developing miniature ground penetrating radars (GPR) for use in mapping subsurface stratigraphy from planetary rovers for Mars and lunar applications. The Mars GPR is for deeper penetration (up to 50 m depth) into the Martian subsurface at moderate resolution (0.5 m) for a geological characterization. As a part of the CRUX (Construction and Resource Utilization Explorer) instrument suite, the CRUX GPR is optimized for a lunar prospecting application. It will have shallower penetration (5 m depth) with higher resolution (10 cm) for construction operations including ISRU (in-situ resource utilization).
Heirs property owners are especially vulnerable to natural and manmade disasters. This group of people have inherited property left with no clear title and thus have unclear group ownership with the other legal owners, which are all spouses, children, etc. of past owners. After Hurricane Irma made landfall in Georgia in September of 2017, heirs property owners became more likely to be denied access to federal relief due to the legal status of their property title. To observe how this group was impacted by Hurricane Irma, the NASA DEVELOP team partnered with The Georgia Heirs Property Law Center (The Center), a non-profit law firm that works with heirs properties owners. The team used computer assisted mass appraisal (CAMA) data to identify likely heirs property owners. They cross referenced this map with a flood map produced with surface reflectance and backscatter imagery from Landsat 8 OLI, Sentinel-2 MSI, and Sentinel-1 C-SAR, sensors to identify communities in need of relief or assistance. The flood extent maps were validated against United States Geological Survey (USGS) Hurricane Irma High Water Mark in situ data taken the same day Irma crossed into Georgia. To further evaluate the impacted group, the team correlated the flood and heirs property likelihood maps to FEMA denials based on titles issues. The team’s end products were handed off to the Georgia Heirs Property Law Center for use in community outreach, educational materials, and to help direct where The Center can work to prioritize its limited legal resources.
Atmospheric rivers are a major contributor to extreme precipitation events and flooding in California. This study assessed the feasibility of using Earth observation data to monitor precipitation, soil moisture, and flooding from atmospheric rivers in the Salinas River Watershed in central California during the winter of 2022-2023. The team analyzed satellite derived precipitation estimates from the Global Precipitation Measurement mission, soil moisture data from the Soil Moisture Active Passive radiometer, and synthetic aperture radar imagery from Sentinel-1 to detect flood inundation. Global Precipitation Measurement precipitation estimates were found to underestimate rainfall by 33% to 52% compared to rain gauge data. The team found the Soil Moisture Active Passive dataset to be a valuable flooding indicator that they could visualize through various graphical representations, although its accuracy still needs verification with in situ flood maps. Sentinel-1 synthetic aperture radar imagery provided mapping of flood inundation extent along the Salinas River and surrounding areas and the Blue Spot model appears to be a good predictor of pluvial flood zones. The findings suggest Earth observations can enhance precipitation and flooding monitoring by the California Department of Water Resources, though further verification is needed. Integration of these datasets with vulnerability indices highlighted communities at highest risk during the 2022-2023 flooding events.
The author has identified the following significant results. Computer classification of natural vegetation, in the vicinity of Big Summit Prairie, Crook County, Oregon was carried out using MSS digital data. Impure training sets, representing eleven vegetation types plus water, were selected from within the area to be classified. Close correlations were visually observed between vegetation types mapped from the large scale photographs and the computer classification of the ERTS data (Frame 1021-18151, 13 August 1972).
The author has identified the following significant results. Springtime ERTS-1 imagery covering pre-selected test sites in Iowa showed considerable detail with respect to broad soil and land use patterns. Additional imagery has been incorporated into a state mosaic. The mosaic was used as a base for soil association lines transferred from an existing map. The regions of greatest contrast are between the Clarion-Nicollet-Webster soil association area and adjacent areas. Landscape characteristics in this area result in land use patterns with a high percentage of pasture, hay, and timber. The soil association areas of the state that have patterns interpreted to be associated with intensive row crop production are: Moody, Galva-Primghar-Sac, Clarion-Nicollet-Webter, Tama-Muscatine, Dinsdale-Tama, Cresco-Lourdes, Clyde, Kenyon-Floyd-Clyde, and the Luton-Onawa-Salix area on the Missouri River floodplain. Forestland estimates have been attained for an area in central Iowa using wintertime ERTS-1 imagery. Visual analysis of multispectral, temporal imagery indicates that temporal analysis for cropland identification and acreage analyses procedures may be a very useful tool. Combinations of wintertime, springtime, and summertime ERTS-1 imagery separate most vegetation types. Timing can be critical depending upon crop development and harvesting times because of the dynamic nature of agricultural production.
Long-term, sustainable planetary exploration will require the ability to "live off the land," relying on In-Situ Resource Utilization (ISRU) and In-Situ Construction as core capabilities. Reduction of both risk and launch mass for lunar construction will require evaluating and comparing regolith materials for use as feedstocks suitable for in-situ beneficiation and fabrication of building components. These material assessment capabilities will inform lunar infrastructure design decisions, with co-benefits for terrestrial construction using in-situ materials. Current planetary construction technology development relies on lunar mapping and orbital data, Apollo-era sample analyses, current simulant inventories, and tests conducted using analog site soils. Requirements for lunar infrastructure design decisions and construction systems will be determined based on specific environmental conditions, mission architectures, and the materials available within traverse range of lunar feedstock processing depots. Critical for success is the capability to identify, evaluate and make effective use of a wide range of materials as they are found in-situ on the lunar surface. This paper discusses the development of a digital repository for data on soil and regolith properties, beginning with their structural performance in both cementitious and non-cementitious building material formulations. The Database for In-situ Resource Testing (DIRT) compiles a catalog of raw materials, additives, and formulations, with notations pertaining to material sources and preparation techniques entered via a web-based user interface. Design of consistent data schemas for site-sourced materials evaluation will facilitate linkage with relevant terrestrial and planetary materials databases while enabling guided data input via templates for participation by broader groups of collaborators. Results of these analyses are compiled in a centralized repository to generate insights applicable for regolith resources and landing sites yet to be precisely defined. Collection of thorough records of material characteristics, applications and performance will support innovative construction solutions not only for space infrastructure but for sustainable, resilient design in the terrestrial built environment.
Energy systems generating power from ocean waves, currents, tides, and thermal and salinity gradients are being developed to power oceanographic instrumentation and autonomous vehicles in Earth’s oceans. Exploration missions enabled or extended with in-situ energy harvesting on Earth may be similar to those on extra-terrestrial ocean worlds including mapping, biogeochemical sampling, acoustic monitoring, search for building blocks of life, and physical oceanographic characterization. With the addition of ocean energy available at the point of observation, data can be collected on larger spatial and temporal scales, enabling more comprehensive missions on other worlds. Power resource characteristics (e.g. current speed, variability) will similarly need to be assessed. Earth and extra-terrestrial ocean missions share vast technical challenges including high expense, need for advanced autonomy, ability to survive in the harshest environments, and limited communications or opportunities for intervention. Marine energy systems may be the only option for in-situ generation in certain scenarios (e.g., under a thick layer of ice) or advantageous over onboard energy storage options that may interfere with the natural environment (e.g., radioisotope thermoelectric generators). This work provides an overview of existing marine energy technology pertaining to ocean observations, highlights emerging research and development and new funding and program initiatives, explores similarities in mission requirements between terrestrial and extra-terrestrial applications, and suggests innovation pathways towards enabling high-value ocean world exploration powered by ocean energy.
This dataset accompanies the report "Potential Availability of and Supply Curves for Low-Cost, Dispatch-Constrained Electricity", which provides initial estimates of the quantity and availability of the potential low-cost, dispatch-constrained electricity (LDE) resource in the United States under scenarios with high variable renewable energy (VRE) penetrations. The analysis also estimates supply curves that can be used in subsequent analysis of the opportunity to use the LDE. The estimated LDE resource could be used for various applications that value low-cost electricity and can operate at reduced capacity factors, including electrolytic hydrogen production and carbon capture. The analysis accompanying this dataset was performed in 2018-2019 to support an analysis of "The Technical and Economic Potential of the H2@Scale Concept within the United States" ( https://www.nlr.gov/docs/fy21osti/77610.pdf ). This dataset includes the quantity of estimated LDE resource for each hour of the year in 2050, aggregated to both the national level and the ReEDS balancing area level. As described in the accompanying report, the ReEDS model was used to project the evolution of the power sector over time. Links to the mapping of ReEDS balancing areas to states and ReEDS balancing area shape files are provided. This dataset also includes the report figure data.
Multidiscipline team interpretation of ERTS satellite and highflight imagery is providing resource and land use information needed for land use planning in Oregon. A coordinated inventory of geology, soil-landscapes, forest and range vegetation, and land use for Crook County, illustrates the value of this approach for broad area and state planning. Other applications include mapping fault zones, inventory of forest clearcut areas, location of forest insect damage, and monitoring irrigation development. Computer classification is being developed for use in conjunction with visual interpretation.
The author has identified the following significant results. A current uniform land inventory was derived, in part, from LANDSAT data. The State has the ability to convert processed land information from LANDSAT to Ohio Capability Analysis Program (OCAP). The OCAP is a computer information and mapping system comprised of various programs used to digitally store, analyze, and display land capability information. More accurate processing of LANDSAT data could lead to reasonably accurate, useful land allocations models. It was feasible to use LANDSAT data to investigate minerals, pollution, land use, and resource inventory.
Programs using remote sensing to obtain geologic information in Africa are reviewed. Studies include the use of Landsat MSS data to evaluate petroleum resources in sedimentary rock terrains in Kenya and Sudan and the use of Landsat TM 30-m resolution data to search for mineral deposits in an ophiolite complex in Oman. Digitally enhanced multispectral SPOT data at a scale of 1:62,000 were used to map folds, faults, diapirs, bedding attitudes, and stratigraphic units in the Atlas Mountains in northern Algeria. In another study, SIR-A data over a vegetated and faulted area of Sierra Leone were compared with data collected by the Landsat MSS and TM systems. It was found that the lineaments on the SIR-A data were more easily detected.
The mineral ilmenite (FeTiO3) was found in abundance in lunar mare soils returned during the Apollo project. Lunar ilmenite often contains greater than 50 weight-percent titanium dioxide (TiO2), and is a primary potential resource for oxygen and other raw materials to supply future lunar bases. Chemical and spectroscopic analysis of the returned lunar soils produced an empirical function that relates the spectral reflectance ratio at 400 and 560 nm to the weight percent abundance of TiO2. This allowed mapping of the lunar TiO2 distribution using telescopic vidicon multispectral imaging from the ground; however, the time variant photometric response of the vidicon detectors produced abundance uncertainties of at least 2 to 5 percent. Since that time, solid-state charge-coupled device (CCD) detector technology capable of much improved photometric response has become available. An investigation of the lunar TiO2 distribution was carried out utilizing groundbased telescopic CCD multispectral imagery and spectroscopy. The work was approached in phases to develop optimum technique based upon initial results. The goal is to achieve the best possible TiO2 abundance maps from the ground as a precursor to lunar orbiter and robotic sample return missions, and to produce a better idea of the peak abundances of TiO2 for benefaction studies. These phases and the results are summarized.
There are many situations in which the image resolution of satellite data is insufficient to provide the detail required for resource management and environmental monitoring. This paper will focus on applications of high-resolution (0.4 to 10 m) airborne multispectral and imaging spectrometer data acquired in Canada using the MEIS II multispectral line imager and the PMI imaging spectrometer. Applications discussed will include forestry, mapping, and geobotany.
Since March 1973 there has been a shift in ERTS results in geology from the initial show-and-tell stage to a period in which scientific studies predominated, and now to an emphasis on effective applications having economic benefits and clearcut relevance to national needs. Many years will be spent on geological tasks resulting from ERTS alone; reconnaissance mapping in inaccessible regions, map revisions, regional or synoptic analysis of crustal fractures, assessment of dynamic surficial processes, systematic search for mineral wealth, use of sophisticated enhancement techniques, recognition of potential geologic hazards, and many more applications that still need to be defined.