Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “process coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

An Integrated Modeling Framework for Sediment Dynamics During Urban Flooding: Application to Hurricane Harvey in Houston

Floodwater can mobilize and redistribute large volumes of sediment from upland to downstream urban areas, threatening infrastructure, water quality, and ecosystem health. However, existing modeling approaches often fail to capture sediment dynamics in urban floodplains due to the lack of integration between upland hydrological processes and riverine sediment transport. This study presents the first integrated modeling framework that couples the Energy Exascale Earth System Model (E3SM) land component, which simulates runoff and hillslope erosion, with TELEMAC-GAIA, a two-dimensional hydrodynamic and sediment transport model. This framework enables the fully distributed, process-based simulation of high-resolution (as fine as 30 m) sediment dynamics from hillslopes to floodplains. Applied to a highly urbanized watershed in Houston during Hurricane Harvey, this framework reproduced observed water levels at 16 USGS gauges (median R 2 = 0.83 and KGE = 0.78), key sediment dynamics such as sediment transport and deposition processes, and reproduced spatial deposition patterns consistent with LiDAR-derived data. Based on the simulation, we estimate 8.0 million m 3 of event-scale sediment deposition, including 5.7 million m 3 trapped in the flood-control reservoirs and 2.3 million m 3 deposited along major channels and floodplains. Using a representative unit removal cost, this corresponds to an estimated dredging cost of $581 million for total deposition. These results provide a first-order, physically based quantification of Harvey-scale sediment impacts. This study provides a valuable tool for the holistic analysis of sediment dynamics triggered by extreme urban flooding, supporting flood-resilience planning. More broadly, it highlights the importance of integrating physically based hydrological processes for urban flooding and sediment research.

Hurricane Harvey↗
DOE OSTI2026

Dispersive and nondispersive 𝐾-matrix formalisms

The modeling of coupled-channel effects has become increasingly important due to the availability of highly precise data for a large variety of hadronic (re)scattering processes. The 𝐾-matrix is a powerful, yet comparatively simple, method to describe scattering amplitudes, including coupled-channel effects, with the aim of interpreting experimental data. Throughout the literature, a range of dispersive and nondispersive 𝐾-matrix methods are employed. Here, we compare the dispersive and nondispersive formulations in the context of the N/D method. It is shown that the methods are equivalent in the physical region under 𝐾-matrix reparametrization. Differences away from the physical region are examined. Applications to synthetic data are used to illustrate the effects of model choices concerning form factors and the application of dispersion relations, with the goal of clarifying best practices. We find no clear preference with regard to dispersive modeling. In contrast, we find that interpretational ambiguity of the bare model parameters—and even of the form of the bare model—is endemic, and recommend a thorough sampling of data and model spaces to assess conclusion robustness.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Predictive Capability Maturity Model Demonstration for Cylindrical Cavity Coupling Using Gemma in the Next Generation Workflow

The predictive capability maturity model (PCMM) uses the expert elicitation process to generate credibility evidence for a particular analysis. To ensure Gemma has the capability to efficiently produce this credibility evidence, next generation workflows (NGW) are created for the solution verification, calibration/validation, and input uncertainty quantification portions of the PCMM assessment. These workflows are then used on the Higgins cylinder problem, which is representative of applications involving external-to-internal electromagnetic field coupling through a slot. The uncertainties calculated using these workflows are then used to calculate the validation comparison error and the validation uncertainty for the model following the American Society of Mechanical Engineers (ASME) verification and validation (V&V) 20 standard. These workflows will enable analysts to iterate each element of PCMM more efficiently than if completed without using a NGW workflow. An example of this iterative process is shown in Section 7.2.

42 ENGINEERING↗
DOE OSTI2023

Simulating the Excited-State Dynamics of Polaritons with Ab Initio Multiple Spawning

Over the past decade, there has been a growth of interest in polaritonic chemistry, where the formation of hybrid light–matter states (polaritons) can alter the course of photochemical reactions. These hybrid states are created by strong coupling between molecules and photons in resonant optical cavities and can even occur in the absence of light when the molecule is strongly coupled with the electromagnetic fluctuations of the vacuum field. Here, we present a first-principles model to simulate nonadiabatic dynamics of such polaritonic states inside optical cavities by leveraging graphical processing units (GPUs). Our first implementation of this model is specialized for a single molecule coupled to a single-photon mode confined inside the optical cavity but with any number of excited states computed using complete active space configuration interaction (CASCI) and a Jaynes–Cummings-type Hamiltonian. Using this model, we have simulated the excited-state dynamics of a single salicylideneaniline (SA) molecule strongly coupled to a cavity photon with the ab initio multiple spawning (AIMS) method. We demonstrate how the branching ratios of the photodeactivation pathways for this molecule can be manipulated by coupling to the cavity. We also show how one can stop the photoreaction from happening inside of an optical cavity. Finally, we also investigate cavity-based control of the ordering of two excited states (one optically bright and the other optically dark) inside a cavity for a set of molecules, where the dark and bright states are close in energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Chirped-grating spectrometer-on-a-chip

We demonstrate an on-chip spectrometer readily integrable with CMOS electronics. The structure is comprised of a SiO 2 /Si 3 N 4 /SiO 2 waveguide atop a silicon substrate. A transversely chirped grating is fabricated, in a single-step optical lithography process, on a portion of the waveguide to provide angle and wavelength dependent coupling to the guided mode. The spectral and angular information is encoded in the spatial dependence of the grating period. A uniform pitch grating area, separated from the collection area by an unpatterned propagation region, provides the out-coupling to a CMOS detector array. A resolution of 0.3 nm at 633 nm with a spectral coverage tunable across the visible and NIR (to ∼ 1 µm limited by the Si photodetector) by changing the angle of incidence, is demonstrated without the need for any signal processing deconvolution. This on-chip spectrometer concept will cost effectively enable a broad range of applications that are beyond the reach of current integrated spectroscopic technologies.

Nezhadbadeh, Shima↗
DOE OSTI2020

Ocean and Sea Ice and their Interactions around Greenland and the West Antarctic Peninsula in Forced Fine-Resolution Global Simulations

Anomalously warm ocean waters have been implicated as the cause of accelerated ablation along the margin of the Greenland ice sheet, as well as the cause of increasing basal melt rate, mass loss, and grounding line retreat of many Antarctic ice shelves. The overarching science objective of this project is to investigate how the interplay of regional processes and decadal changes in local and remote forcing impact the delivery and end member composition of waters over the continental shelves of Greenland and Antarctica. To address this goal, an existing global eddy-active ocean general circulation model (OGCM), coupled to a thermodynamic/dynamic ice model and forced with atmospheric reanalysis fluxes from 1948-2009, was analyzed to understand these processes around the continental margins of Greenland and Antarctica. This simulation did not contain a representation of ice sheet melt or resolve mesoscale eddies over these continental margins, so two new coupled OGCM/sea-ice models were constructed and analyzed to address the roles of small scale features and processes (< 5km) and freshwater flux surpluses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Simulation of Compound Flooding Using River‐Ocean Two‐Way Coupled E3SM Ensemble on Variable‐Resolution Meshes

Abstract Coastal zone compound flooding (CF) can be caused by the interactive fluvial and oceanic processes, particularly when coastal backwater propagates upstream and interacts with high river discharge. The modeling of CF is limited in existing Earth System Models (ESMs) due to coarse mesh resolutions and one‐way coupled river‐ocean components. In this study, we present a novel multi‐scale coupling framework within the Energy Exascale Earth System Model (E3SM), integrating global atmosphere and land with interactively coupled river and ocean models using different meshes with refined resolutions near the coastline. To evaluate this framework, we conducted ensemble simulations of a CF event (Hurricane Irene in 2011) in a Mid‐Atlantic estuary. The results demonstrate that the novel E3SM configuration can reasonably reproduce river discharge and sea surface height variations. The two‐way river‐ocean coupling improves the representation of coastal backwater effects at the terrestrial‐aquatic interface that are caused by the combined actions of tide and storm surge during the CF event, thus providing a valuable modeling tool for better understanding the river‐estuary‐ocean dynamics in extreme events under climate change. Notably, our results show that the most significant CF impacts occur when the highest storm surge generated by a tropical cyclone meets with a moderate river discharge. This study highlights the state‐of‐the‐art advancements developed within E3SM for simulating multi‐scale coastal processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Chloride modification of vacuum-assisted blade-coated perovskite solar cells and mini-modules in ambient environment

Scalable deposition of perovskite thin films under ambient conditions remains a key challenge for the commercialization of perovskite photovoltaics, primarily due to the difficulty of controlling crystallization kinetics and suppressing non-radiative recombination during film formation. In this work, we present an effective strategy to modulate crystallization kinetics and non-radiative recombination in vacuum-quenched blade-coated perovskite films processed in air using chloride-based additives. By systematically comparing PbCl 2 and 3-chloropropylamine hydrochloride (Cl-PACl), we elucidate how different chloride incorporation pathways influence crystallization behavior and optoelectronic properties. In situ transmission and in situ photoluminescence measurements reveal that PbCl 2 acts as a transient additive that slows intermediate/perovskite phase formation while suppressing non-radiative recombination, leading to improved film quality. In contrast, Cl-PACl introduces additional trap states that deteriorate optoelectronic performance. As a result, PbCl 2 -modified perovskite solar cells achieve a champion power conversion efficiency (PCE) of 24.2% and remarkable operational stability, retaining over 90% of their initial performance after 800 hours of continuous illumination. Furthermore, we successfully scaled the process, fabricating a perovskite mini-module that delivered a champion efficiency of 18.0%. This study underscores the critical importance of coupling vacuum-assisted blade coating with transient additive engineering for achieving high-performance, stable, and scalable perovskite photovoltaics processed in ambient air.

14 SOLAR ENERGY↗
DOE OSTI2023

A high-resolution large-eddy simulation framework for wildland fire predictions using TensorFlow

Background: Wildfires are becoming more severe, so we need improved tools to predict them over a wide range of conditions and scales. One approach towards this goal entails the use of coupled fire/atmosphere modelling tools. Although significant progress has been made in advancing their physical fidelity, existing tools have not taken full advantage of emerging programming paradigms and computing architectures to enable high-resolution wildfire simulations. Aims: The aim of this study was to present a new framework that enables landscape-scale wildfire simulations with physical representation of combustion at an affordable cost. Methods: We developed a coupled fire/atmosphere simulation framework using TensorFlow, which enables efficient and scalable computations on Tensor Processing Units. Key Results: Simulation results for a prescribed fire were compared with experimental data. Predicted fire behavior and statistical analysis for fire spread rate, scar area, and intermittency showed overall reasonable agreement. Scalability analysis was performed, showing close to linear scaling. Conclusions: While mesh refinement was shown to have less impact on global quantities, such as fire scar area and spread rate, it benefits predictions of intermittent fire behavior, buoyancy-driven dynamics, and small-scale turbulent motion. Implications: This new simulation framework is efficient in capturing both global quantities and unsteady dynamics of wildfires at high spatial resolutions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Selectively Reducing Nitrate into NH 3 in Neutral Media by PdCu Single-Atom Alloy Electrocatalysis

Electrocatalytic nitrate reduction reaction (NO 3 – RR) technology provides a promising solution to recover the nitrate nutrition from wastewater through catalyzing nitrate reduction into value-added NH 3 . However, the selectivity and efficiency of electrocatalysts are frustrated due to the imbalance of *H adsorption (for NO 3 hydrogenation) and unavoidable adjacent *H self-coupling on active sites, resulting in competitive hydrogen evolution reaction (HER). Here, we report a PdCu single-atom alloy (SAA) catalyst that allows isolated Pd sites to produce *H for the hydrogenation process of *NO 3 on neighboring Cu sites, which can restrain the *H self-coupling through extending the distance between two *H and thus effectively suppress competitive HER. Consequently, the PdCu SAA catalyst exhibits an ultrahigh NH 3 Faraday efficiency (FE) of 97.1% with a yield of 15.4 μmol cm –2 h –1 from the electrocatalytic NO 3 – RR in the neutral electrolyte, outperforming most of the reported catalysts. In conclusion, single-crystal experiments and theoretical calculations further prove that the introduction of atomic Pd on the Cu (100) surface could serve as the main active site and greatly decrease the energy barrier of the rate-determining step (RDS) on Cu from ΔG = 0.39 eV (*NOO → *NOOH) to ΔG = 0.10 eV of *NOH → *NHOH on PdCu SAA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A Novel Catalytic Membrane Reactor for DME Synthesis from Renewable Resources

Production of liquid fuels or chemicals from CO 2 (captured from the air or flue gases) and renewable hydrogen presents a new approach to producing clean fuels domestically. While significant progress has been made in the area of renewable electricity generation from solar and wind, a large gap remains with respect to the production of renewable liquid fuels/chemicals. Other processes for producing liquid fuels/chemicals from renewable electricity are constrained by thermodynamic limitations, making them prohibitively expensive and impractical. The team is overcoming these limitations and developing catalytic membrane reactor processes with high yields and low energy penalties. Supported by the Advanced Research Projects Agency-Energy (ARPA-E) of the US Department of Energy (DOE), GTI Energy and partners have been developing a technology for the production of renewable dimethyl ether (DME) from carbon dioxide (CO 2 ) and renewable hydrogen (H 2 ) using a novel catalytic membrane reactor and demonstration of this system at a scale of 1 kg/day. DME is a clean-burning, non-toxic fuel with a high cetane value (55-60), making it an excellent diesel alternative. DME can be stored as a liquid under moderate pressure, eliminating the need for the high-pressure containers used for CNG or cryogenics, as in the case of LNG. DME is also approved as a renewable fuel under the U.S. Environmental Protection Agency’s Renewable Fuels Standard (RFS), making it eligible for Renewable Identification Numbers (RINs) credits. By producing DME through the catalytic conversion of captured CO 2 and renewable H 2 , this process will produce renewable liquid transportation fuel and a means of large-scale utilization of captured CO 2 . In the DME synthesis process, CO 2 and H 2 are fed to a hollow fiber catalytic membrane reactor at 300-600 psig that contains a bi-functional catalyst that combines two reactions, methanol synthesis (CO 2 + 3H 2 → CH 3 OH + H 2 O) and methanol dehydration (2CH 3 OH → CH 3 OCH 3 + H 2 O), into a one-step process to produce DME. The bifunctional catalyst converts methanol to DME, enabling higher overall CO 2 conversion. A Cu/ZnO/ZrO 2 /Al 2 O 3 (CZZA) catalyst is used for methanol synthesis and is coupled with a zeolite catalyst H-ZSM-5 for dehydration. This one-step process intensifies a process that would otherwise require multiple reaction steps. However, combining these two reactions results in increased water production which inhibits catalytic activity. Here, the Na + -gated, water-transport membrane (Science, vol. 367, pp. 667, 2020), removes water in situ, shifting the thermodynamic equilibrium towards product formation while decreasing kinetic inhibition from water adsorption onto the catalyst surface. The Na + gated, water-transport nanochannel membrane showed H 2 O/CO 2 selectivity of 560 at 250 °C and 300 psig for H 2 O/CO 2 /CO/H 2 /MeOH gas mixtures. The selectivities of H 2 O/H 2 , H 2 O/CO, and H 2 O/MeOH were 190, 170, and 80, respectively. In a laboratory-scale membrane reactor, DME synthesis testing using this membrane, a DME production rate of 440 g DME /kg cat /h was achieved at 260 °C and 550 psig. Compared to the packed bed reactor, the CO 2 conversion and DME production rate in the membrane reactor were 80% and three times higher, respectively. A prototype test system (1 kg/day) was designed, constructed, and tested. A DME production rate of 1.31 kg/day and a DME productivity of 360 g/h/kg were achieved in the prototype membrane reactor. Good stability was demonstrated during 150-h continuous operation and multiple startups/shutdowns tests.

10 SYNTHETIC FUELS↗
DOE OSTI2021

A surrogate-model-based approach for estimating the first and second-order moments of offshore wind power

Power curve, the functional relationship that governs the process of converting a set of weather variables experienced by a wind turbine into electric power, is widely used in the wind industry to estimate power output for planning and operational purposes. Existing methods for power curve estimation have three main limitations: (i) they mostly rely on wind speed as the sole input, thus ignoring the secondary, yet possibly significant effects of other environmental factors, (ii) they largely overlook the complex marine environment in which offshore turbines operate, potentially compromising their value in offshore wind energy applications, and (ii) they solely focus on the first-order properties of wind power, with little (or null) information about the variation around the mean behavior, which is important for ensuring reliable grid integration, asset health monitoring, and energy storage, among others. In light of that, this study investigates the impact of several wind-and wave-related factors on offshore wind power variability, with the ultimate goal of accurately predicting its first two moments. Further, our approach couples OpenFAST—a multi-physics wind turbine simulator—with Gaussian Process (GP) regression to reveal the underlying relationships governing offshore weather-to-power conversion. We first find that a multi-input power curve which captures the combined impact of wind speed, direction, and air density, can provide double-digit improvements, in terms of prediction accuracy, relative to univariate methods which rely on wind speed as the sole explanatory variable (e.g. the standard method of bins). Wave-related variables are found not important for predicting the average power output, but interestingly, appear to be extremely relevant in describing the fluctuation of the offshore power around its mean. Tested on real-world data collected at the New York/New Jersey bight, our proposed multi-input models demonstrate a high explanatory power in predicting the first two moments of offshore wind generation, testifying their potential value to the offshore wind industry.

17 WIND ENERGY↗
DOE OSTI2026

Vibrational Spin-Orbit Coupling Contributions to Excited State Decay of Ligand-to-Ligand Charge Transfer States

Controlling excited state relaxation processes is important in a variety of photochemical and photophysical processes, including the generation of ground and excited state spin polarization for quantum information science applications. Here, we address how specific static distortions – based on vibrational spin-orbit active modes at C2v symmetry determined by group theory – in a series of low-symmetry ligand-to-ligand charge transfer complexes enable direct spin-orbit coupling contributions to T1 → S0 excited state decay. These results are used to address spin-vibronic coupling contributions to T1 → S0 decay in a high-symmetry (tBu2bpy)Pt(S,S) (tBu2bpy = 4,4’-di-tert-butyl-2,2’-bipyridine and S,S = benzene-1,2-dithiolate) ligand-to-ligand charge transfer complex with effective C2v symmetry, where T1 relaxation is both spin- and orbitally forbidden due to the direct spin-orbit coupling matrix element being zero by symmetry. Low-frequency vibrations that involve a pyridine-pyridine twisting motion within the bpy ligand generate large ∂/∂Qi values that will contribute significantly to T1 → S0 relaxation. The work advances ligand design strategies for the generation of tailored T1 → S0 relaxation rates, which can be utilized to optimize the generation of electron spin polarization in radical-elaborated ligand-to-ligand charge transfer complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Joint CO 2 Mole Fraction and Flux Analysis Confirms Missing Processes in CASA Terrestrial Carbon Uptake Over North America

Terrestrial biosphere models (TBMs) play a key role in the detection and attribution of carbon cycle processes at local to global scales and in projections of the coupled carbon-climate system. TBM evaluation commonly involves direct comparison to eddy-covariance flux measurements. This study uses atmospheric CO 2 mole fraction ([CO 2 ]) measured in situ from aircraft and tower, in addition to flux-measurements from summer 2016 to evaluate the CASA TBM. WRF-Chem is used to simulate [CO 2 ] using biogenic CO 2 fluxes from a CASA parameter-based ensemble and CarbonTracker version 2017 (CT2017) in addition to transport and CO 2 boundary condition ensembles. The resulting “super ensemble” of modeled [CO 2 ] demonstrates that the biosphere introduces the majority of uncertainty to the simulations. Both aircraft and tower [CO 2 ] data show that the CASA ensemble net ecosystem exchange (NEE) of CO 2 is biased high (NEE too positive) and identify the maximum light use efficiency E max a key parameter that drives the spread of the CASA ensemble in summer 2016. These findings are verified with flux-measurements. The direct comparison of the CASA flux ensemble with flux-measurements confirms missing sink processes in CASA. Separating the daytime and nighttime flux, we discover that the underestimated net uptake results from missing sink processes that result in overestimation of respiration. NEE biases are smaller in the CT2017 posterior biogenic fluxes, which assimilates observed [CO 2 ]. Flux tower analyses, however, reveal an unrealistic overestimation of nighttime respiration in CT2017 due to the limitation of inversion strategy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Multifunctional Catalysts for the Tandem Reactions of Oxygenates

Industrially-relevant catalytic reactions rarely consist of a simple sequence of elementary steps. Moreover, kinetic coupling of multiple reactions on a catalyst surface is highly desired for process intensification and improved energy efficiency for large scale chemical transformations. The shifting landscape of hydrocarbon chemical feedstocks in the US also motivates research on the selective conversion of more complex molecules. One desirable type of catalytic reaction is the reduction of carboxylic acids that are produced from biomass feedstocks to their corresponding alcohols. The proposed research explores the fundamental importance of hydrogen spillover on a multifunctional catalyst for carboxylic acid reduction with H 2 composed of metal particles coupled to metal oxide particles. Recent work has demonstrated the excellent performance of supported tungsten oxide clusters for carboxylic acid reduction, but only after they are promoted with a late transition metal such as palladium. Elucidating the active state of the catalyst and the associated reaction mechanism for acid reduction on that active state are the overall goals of the proposed project and successful completion will enable future design of efficient multifunctional catalysts. The critically important role of the metal promoter is hypothesized to be its ability to dissociate H2 and spillover atomic H to the support. Although hydrogen spillover is a well-recognized phenomenon in catalysis, its role in both catalyst activation and catalytic turnover are still unresolved. The study combined materials synthesis, characterization, reactivity testing, and molecular simulations, to explore the effect of hydrogen chemical potential on the formation of the active catalytic sites and on the steady state catalytic reduction of carboxylic acid. Varying the hydrogen chemical potential through modification of the gas conditions, support composition, and metal loading to modulated the structure and catalytic performance of the reducible metal oxide. Dual function catalysts containing supported Pd and WO x species co-located on a non-reducible carrier (silica) and a reducible carrier (titania) were synthesized and characterized by electron microscopy, temperature-programmed reduction, and chemisorption. Spectroscopic methods such as X-ray absorption and UV-vis were also used to evaluate the catalysts, which were used in the reduction of propionic acid to aldehyde and alcohol. Quantum chemical calculations, including ab initio phase diagrams provided molecular insights into the H spillover phenomenon.

09 BIOMASS FUELS↗
DOE OSTI2020

Attosecond Time-Domain Measurement of Core-Level-Exciton Decay in Magnesium Oxide

Excitation of ionic solids with extreme ultraviolet pulses creates localized core-level excitons, which in some cases couple strongly to the lattice. In this paper, core-level-exciton states of magnesium oxide are studied in the time domain at the Mg L 2 , 3 edge with attosecond transient reflectivity spectroscopy. Attosecond pulses trigger the excitation of these short-lived quasiparticles, whose decay is perturbed by time-delayed near-infrared pulses. Combined with a few-state theoretical model, this reveals that the infrared pulse shifts the energy of bright (dipole-allowed) core-level-exciton states as well as induces features arising from dark core-level excitons. We report coherence lifetimes for the two lowest core-level excitons of 2.3 ± 0.2 and 1.6 ± 0.5 fs and show that these are primarily a consequence of strong exciton-phonon coupling, disclosing the drastic influence of structural effects in this ultrafast relaxation process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Strong Proton‐Phonon Coupling Drives Fast Ion Transport in Perovskites

Conduction of protons in solids is a cooperative process propelled by phonons, with molecular details obscured by the irregular movements in the thermal bath. It is shown that substitution with Y forms an imaginary phonon mode, instrumental for the function as proton conductor and effectively lowering the activation barrier for proton transport. To untangle the interplay in the exemplary proton conductor BaSn 0.9 Y 0.1 O 3 , its crystallographic structure is determined with high resolution neutron diffractometry and its phonon density of states with density functional theory calculations, experimentally validated by element specific nuclear resonant vibration spectroscopy. Based on phonon analysis, a quantitative transport model is present, which predicts the activation energy and performance by the ratio of ionic radii. Rather than individual vibrational modes, it is the oxygen sub-lattice which exerts its momentum on the protons. The extent of this momentum transfer is governed by the ratio of ionic radii. This model extends the transition state theory by the phonon-phonon interaction and complements the previously proposed idea that lattice dynamics is decisive for proton transport and specifies which properties of the material exactly define the vibration properties.

activation barriers↗