A tabletop pulsed magnet system for terahertz optical spectroscopy [Slides]
Abstract not provided.
42 ENGINEERING↗
SEARCH · Engineering Papers
Results for “physical sciences and engineering”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High-Resolution 3D Acoustic Borehole Integrity Monitoring System [Slides]
Abstract not provided.
42 ENGINEERING↗
Preliminary Design of a New Pulsed-Neutron Die--Away Experiments with Absorbers (IER-552 CED-1)
This report presents the preliminary design (CED-1) of IER-552, pulsed-neutron die-away (PNDA) experiments with absorbers, to be conducted by Lawrence Livermore National Laboratory (LLNL). The goal of the PNDA experiments with absorbing materials is to produce high-quality, low-cost integral benchmarks that can be used to validate cross sections that are high priority nuclear data for the Department of Energy’s Nuclear Criticality Safety Program (NCSP). PNDA experiments can be used to generate nuclear data validation benchmarks quickly and cheaply, as they do not require fissile material or a nuclear facility to conduct them. The original PNDA experiments were set up at LLNL under IER-501. Extending the PNDA experiments to include absorbing materials leverages existing facilities and resources at LLNL to validate cross sections, with a basic experiment design that uses a neutron generator to impinge a short, mono-energetic neutron pulse on a poisoned, moderating target sample. The neutron pulse lasts 100 µs, after which the neutron population in the sample reaches thermal equilibrium and later spatial equilibrium. In this fully equilibrized state, the neutron population has a characteristic decay-time eigenvalue. The eigenvalue can be used as an integral parameter to validate nuclear data involved with neutron scattering and absorption. Two observables can be measured: the neutron population and the population of secondary γ-rays produced by inelastic and capture reactions. This report explores the feasibility of both approaches. For γ-ray measurements, this allows for direct measurement of reactions of interest for validation. During the neutron burst time, inelastic (prompt) γ-rays dominate, and these data can be isolated for validation of neutron inelastic scattering data. After the pulse ends, neutron capture (delayed) γ-rays dominate and are produced by many reaction channels as neutrons slow down to thermal energies. Two sets of γ-ray spectra (inelastic, capture) can be produced for validation. Additionally, the time-dependent decay of the capture γ-ray population when the neutron population is thermalized and in its fundamental mode can be used for validation. Two experiments can be imagined where pulsed neutrons are used to validate the nuclear data of absorbing materials. The first integrates well into the existing PNDA testbed at LLNL. The absorber material would be introduced into a moderating target and the same neutron generator, neutron detectors, electronics, and shielding box used for IER-501 would be employed. From the same experimental setup, many absorbing materials can be validated by simply changing the neutron poison in the moderator. The only significant modification would be the introduction of a γ-ray detector. Such an experiment would primarily serve to validate nuclear data in the thermal energy range. The second kind of experiment would validate the fast and epithermal energy range. It would involve pulsing neutron into a bare assembly of the absorber material and measuring the die-away of neutrons. The fast leakage of such an assembly requires nanosecond neutron-generator pulse widths and fast detectors/electronics that could measure ~200 ns die-away curves. This kind of experiment would ideally be performed at a cyclotron, like that available at Lawrence Berkeley National Laboratory.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
All-organic self-separating three-dimensionally nanoarchitected electrochemical energy storage devices
This work realizes a three-dimensionally (3D) nanoarchitected, all organic, "self-separating" lithium-ion electrochemical energy storage (EES) device that is cycled as a solid-state full cell. The device is enabled by a monolithic carbon anode with a co-continuous pore network, derived from the structure direction of resols by an ultra-large molar mass block copolymer (BCP), poly(styrene-block-2-dimethylaminoethyl methacrylate) (SA). Electropolymerization of a single-phase conductive and redox-active material, poly((2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)methyl 9,10-dioxo-9,10-dihydroanthracene-2-carboxylate) (PAQEDOT), into the pore space provides the cathode of the cell. The device is electronically contacted to the relevant electrode network enabled by the co-continuous nature of each electrode. Electrochemical processing via cycling against external lithium in an electrolyte generates a solid electrolyte interphase (SEI) as a separator and lithiates the cell electrodes, after which the EES device is cycled in the solid state. While the full cell does not demonstrate high cyclability, the best full cell demonstrates a discharge capacity of 267 milliamp hours per gram (mAh/g). This work marks, to the best of knowledge of the authors, the first example of an all-organic materials derived 3D nanoarchitected EES device, as well as the first design of "self-separating" cell fabrication. Furthermore, generalization of the design to another co-continuous carbon form factor is demonstrated.
FOS: Physical sciences↗
Electrodynamic Interactions
It is apparent that the electrodynamic tether offers new potential for unique scientific experiments which should enhance the understanding of space plasma physics and in particular certain classes of solar system plasma phenomena, and that these science studies will also address a number of key engineering concerns which may open up new power and thrust generation technology that could be a significant factor in future space operations.
Stone, N. H.↗
Aeronautics and Space Report of the President, Fiscal Year 2006 Activities
The annual 'President's Report' is a good summary of the Government's aerospace activities each year. Mandated by law, it contains information on aerospace activities conducted by 14 Federal departments and agencies. It also contains an executive summary organized by agency, narrative sections organized by subject, as well as extensive appendices containing useful historical data on spacecraft launches, budget figures, key policy documents from the fiscal year, and a glossary.
Space shuttle missions↗
NASA Tech Briefs, March 1995
This issue contains articles with a special focus on Computer-Aided design and engineering amd a research report on the Ames Research Center. Other subjects in this issue are: Electronic Components and Circuits, Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Manufacturing/Fabrication, Mathematics and Information Sciences and Life Sciences
Source record↗
Modeling Electrostatic Fields Generated by Internal Charging of Materials in Space Radiation Environments
Internal charging is a risk to spacecraft in energetic electron environments. DICTAT, NU MIT computational codes are the most widely used engineering tools for evaluating internal charging of insulator materials exposed to these environments. Engineering tools are designed for rapid evaluation of ESD threats, but there is a need for more physics based models for investigating the science of materials interactions with energetic electron environments. Current tools are limited by the physics included in the models and ease of user implementation .... additional development work is needed to improve models.
Minow, Joseph I.↗
Uniformity of Superconducting Tunnel Junction Radiation Detectors
Explore the source record for details and available documents.
Nuclear science and engineering, Engineering - Ins↗
Limits on the Existence of sub-MeV Sterile Neutrinos from the Decay of 7 Be in Superconducting Quantum Sensors
Sterile neutrinos are natural extensions to the standard model of particle physics and provide a possible portal to the dark sector. We report a new search for the existence of sub-MeV sterile neutrinos using the decay-momentum reconstruction technique in the decay of 7 Be. The experiment measures the total energy of the 7 Li daughter atom from the electron capture decay of 7 Be implanted into sensitive superconducting tunnel junction (STJ) quantum sensors. Here, this first experiment presents data from a single STJ operated at a low count rate for a net total of 28 days, and provides exclusion limits on sterile neutrinos in the mass range from 100 to 850 keV that improve upon previous work by up to an order of magnitude.
42 ENGINEERING↗
Fusion-Enabled Pluto Orbiter and Lander
The Pluto orbiter mission proposed here is credible and exciting. The benefits to this and all outer-planet and interstellar-probe missions are difficult to overstate. The enabling technology, Direct Fusion Drive, is a unique fusion engine concept based on the Princeton Field-Reversed Configuration (PFRC) fusion reactor under development at the Princeton Plasma Physics Laboratory. The truly game-changing levels of thrust and power in a modestly sized package could integrate with our current launch infrastructure while radically expanding the science capability of these missions. During this Phase I effort, we made great strides in modeling the engine efficiency, thrust, and specific impulse and analyzing feasible trajectories. Based on 2D fluid modeling of the fusion reactors outer stratum, its scrape-off-layer (SOL), we estimate achieving 2.5 to 5 N of thrust for each megawatt of fusion power, reaching a specific impulse, Isp, of about 10,000 s. Supporting this model are particle-in-cell calculations of energy transfer from the fusion products to the SOL electrons. Subsequently, this energy is transferred to the ions as they expand through the magnetic nozzle and beyond. Our point solution for the Pluto mission now delivers 1000 kg of payload to Pluto orbit in 3.75 years using 7.5 N constant thrust. This could potentially be achieved with a single 1 MW engine. The departure spiral from Earth orbit and insertion spiral to Pluto orbit require only a small portion of the total delta-V. Departing from low Earth orbit reduces mission cost while increasing available mission mass. The payload includes a lander, which utilizes a standard green propellant engine for the landing sequence. The lander has about 4 square meters of solar panels mounted on a gimbal that allows it to track the orbiter, which beams 30 to 50 kW of power using a 1080 nm laser. Optical communication provides dramatically high data rates back to Earth. Our mass modeling investigations revealed that if current high-temperature superconductors are utilized at liquid nitrogen temperatures, they drive the mass of the engine, partly because of the shielding required to maintain their critical temperature. Second generation materials are thinner but the superconductor is a very thin layer deposited on a substrate with additional layers of metallic classing. Tremendous research is being performed on a variety of these superconducting materials, and new irradiation data is now available. This raises the possibility of operating nearfuture high-temperature superconductors at a moderately low temperature to dramatically reduce the amount of shielding required. At the same time, a first generation space engine may require low-temperature superconductors, which are higher TRL and have been designed for space coils before (AMS-02 experiment for the ISS). We performed detailed analysis of the startup system and thermal conversion system components. The ideal working fluid was determined to be a blend of Helium and Xenon. No significant problems were identified with these subsystems. For the RF system, we conceived of a new, more efficient design using state-of-the-art switch amplifiers, which have the potential for 100% efficiency. This report presents details of our engine and trajectory analyses, mass modeling efforts, and updated vehicle designs.
temperature↗
CRISPR-mediated multigene integration enables Shikimate pathway refactoring for enhanced 2-phenylethanol biosynthesis in Kluyveromyces marxianus
Background: 2-phenylethanol (2-PE) is a rose-scented flavor and fragrance compound that is used in food, beverages, and personal care products. Compatibility with gasoline also makes it a potential biofuel or fuel additive. A biochemical process converting glucose or other fermentable sugars to 2-PE can potentially provide a more sustainable and economical production route than current methods that use chemical synthesis and/or isolation from plant material. Results: We work toward this goal by engineering the Shikimate and Ehrlich pathways in the stress-tolerant yeast Kluyveromyces marxianus. First, we develop a multigene integration tool that uses CRISPR-Cas9 induced breaks on the genome as a selection for the one-step integration of an insert that encodes one, two, or three gene expression cassettes. Integration of a 5-kbp insert containing three overexpression cassettes successfully occurs with an efficiency of 51 ± 9% at the ABZ1 locus and was used to create a library of K. marxianus CBS 6556 strains with refactored Shikimate pathway genes. The 3 3 -factorial library includes all combinations of KmARO4, KmARO7, and KmPHA2, each driven by three different promoters that span a wide expression range. Analysis of the refactored pathway library reveals that high expression of the tyrosine-deregulated KmARO4 K221L and native KmPHA2, with the medium expression of feedback insensitive KmARO7 G141S , results in the highest increase in 2-PE biosynthesis, producing 684 ± 73 mg/L. Ehrlich pathway engineering by overexpression of KmARO10 and disruption of KmEAT1 further increases 2-PE production to 766 ± 6 mg/L. The best strain achieves 1943 ± 63 mg/L 2-PE after 120 h fed-batch operation in shake flask cultures. Conclusions: The CRISPR-mediated multigene integration system expands the genome-editing toolset for K. marxianus, a promising multi-stress tolerant host for the biosynthesis of 2-PE and other aromatic compounds derived from the Shikimate pathway.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Versatile Magneto-Dielectric Response of Epitaxial Thin Films of the High Entropy Oxide Perovskite Nd(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3
Explore the source record for details and available documents.
Capu, Roxana [Department of Physics West Universit↗
INTEGRATED WORKFLOW MANAGEMENT FOR PARTICLE ACCELERATOR SIMULATION
Supercomputing systems are used for a wide range of computationally demanding tasks in many fields of science and engineering. They play a key role in numerical simulation, in which mathematical models are computed in order to simulate the behavior of physical systems. Scientists and engineers that use supercomputers for numerical simulation often have their productivity limited by the need to manually organize and manage extremely large amounts of data that are often produced and consumed by the software programs run on these systems. Recognizing these limitations, Kitware Inc. (Clifton Park, NY) and SLAC National Accelerator Laboratory (Menlo Park, CA) are developing an advanced software platform that can reduce the cognitive overhead required by knowledge workers when using supercomputers for numerical simulation. Phase I of the project is complete and includes the development of new capabilities for organizing simulation project files, improvements to the user interface and overall usability, and deployment of a “middle tier” server to sit between user desktop machines and supercomputers to offload much of the data management workload. The project also developed prototype software for executing sequences of numerical simulations, and a prototype for migrating supercomputing software to cloud-based computing systems to provide a potential alternative to supercomputers with different logistical and price-to-performance tradeoffs.
Tourtellott, John↗
MDO and Cross-Disciplinary Practice in R&D: A Portrait of Principles and Current Practice
For several decades, Multidisciplinary Design Optimization (MDO) has served an important role in aerospace engineering by incorporating physics based disciplinary models into integrated system or sub-system models for use in research, development, (R&D) and design. This paper examines MDO's role in facilitating the integration of the researchers from different single disciplines during R&D and early design of large-scale complex engineered systems (LaCES) such as aerospace systems. The findings in this paper are summarized from a larger study on interdisciplinary practices and perspectives that included considerable empirical data from surveys, interviews, and ethnography. The synthesized findings were derived by integrating the data with theories from organization science and engineering. The over-arching finding is that issues related to cognition, organization, and social interrelations mostly dominate interactions across disciplines. Engineering issues, such as the integration of hardware or physics-based models, are not as significant. Correspondingly, the data showed that MDO is not the primary integrator of researchers working across disciplines during R&D and early design of LaCES. Cognitive focus such as analysis versus design, organizational challenges such as incentives, and social opportunities such as personal networks often drove the human interactive practices among researchers from different disciplines. Facilitation of the inherent confusion, argument, and learning in crossdisciplinary research was identified as one of several needed elements of enabling successful research across disciplines.
Rivas McGowan, Anna-Maria↗
Low-Cost, Durable and Retrofittable Methane Oxidation Catalysts (Abstract)
There is significant concern over the contributions of GHG emissions to global warming which has sparked intense focus on reducing GHG emissions in industrial processes. In response, this project aims to develop and demonstrate a methane oxidation catalyst that can be deployed on NG engines used in US O&G industry and will serve to significantly reduce the carbon footprint associated with those midstream operations. The catalyst will achieve 90% oxidation efficiency while operating at 450°C or less and at 50% less Pd versus existing catalyst technology. This technology would enable the realization of nearly 30% reduced GHG emissions from NG engines (versus diesel) that methane slip from these engines otherwise negates.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
There from the Beginning: The Women of Los Alamos National Laboratory Supporting National and International Nuclear Security
From the beginning of the Manhattan Project in the early 1940s, the women of what would become Los Alamos National Laboratory (LANL) worked in technical positions alongside their male counterparts, played a key role as computers, and worked in administrative jobs as secretaries, phone operators, bookkeepers, and on behalf of the U.S. Army in the Women’s Army Corps. Throughout the history of the Laboratory, women experts at LANL helped establish and lead important national and international security programs, with careers in science, technology, engineering, and mathematics. Over time, the women of Los Alamos have come together under various Employee Resource Groups, such as the Atomic Women, to help the next generation succeed in their technical fields. The Laboratory’s commitment to diversity and inclusion continues to this day, with current Laboratory Director Thom Mason leading LANL as the first national laboratory to join the Gender Champions in Nuclear Policy.
98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
Kirigami Photopiezo Catalysts for Self-Sustainable Environment Remediation
Photo(electro)-piezo catalysis has emerged as one of the most effective strategies for sustainable environmental remediation. While various (nano)materials have been investigated for enhancing the intrinsic properties related to the interfacial band structure, increasing the efficiency by integration of materials with rational design for stress–strain applications has not yet been considered. Herein, we introduce kirigami strain engineering to photopiezo catalysts for enhancing efficiency by increasing the magnitude of applied strain and density of bends. Macroscale stretching motion is converted into localized bending by a pliable kirigami structure using similar or even lower input energy, which can be easily modulated by natural waves. The kirigami structure leads to a significant enhancement (~250%) in the degradation of dyes, and we discovered the significant contribution of the oxygen reduction pathway in the charge-transfer mechanism, which corresponds to the observed enhancement. In conclusion, the photopiezo catalytic effects of kirigami were further highlighted by the small water reservoir test, showing its feasibility in nature for self-sustainable environmental remediation that can be modulated using motions of winds, waves, and life vibrations.
14 SOLAR ENERGY↗