Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

High-Field One-Dimensional and Two-Dimensional 27Al Magic-Angle Spinning Nuclear Magnetic Resonance Study of ?-, d-, and ?-Al2O3 Dominated Aluminum Oxides: Toward Understanding the Al Sites in ?-Al2O3

Herein, a detailed analysis was carried out using high-field (19.9 T) 27Al magic-angle spinning (MAS) nuclear magnetic resonance (NMR) on three specially prepared aluminum oxide samples where the ?-, d-, and ?-Al2O3 phases are dominantly expressed through careful control of the synthesis conditions. Specifically, two-dimensional (2D) multiquantum (MQ) MAS 27Al was used to obtain high spectral resolution, which provided a guide for analyzing quantitative 1D 27Al NMR spectra. Six aluminum sites were resolved in the 2D MQ MAS NMR spectra, and seven aluminum sites were required to fit the 1D spectra. A set of octahedral and tetrahedral peaks with well-defined quadrupolar line shapes was observed in the ?-phase dominant sample and was unambiguously assigned to the ?-Al2O3 phase. The distinct line shapes related to the ?-Al2O3 phase provided an opportunity for effectively deconvoluting the more complex spectrum obtained from the d-Al2O3 dominant sample, allowing the peaks/quadrupolar parameters related to the d-Al2O3 phase to be extracted. The results show that the d-Al2O3 phase contains three distinct AlO sites and three distinct AlT sites. This detailed Al site structural information offers a powerful way of analyzing the most complex ?-Al2O3 spectrum. It is found that the ?-Al2O3 phase consists of Al sites with local structures similar to those found in the d-Al2O3 and ?-Al2O3 phases albeit with less ordering. Spin–lattice relaxation time measurement further confirms the disordering of the lattice. Collectively, this study uniquely assigns 27Al features in transition aluminas, offering a simplified method to quantify complex mixtures of aluminum sites in transition alumina samples.

Xu, Suochang↗

Reversible Oxidation Quantified by Optical Properties in Epitaxial Fe2CrO4+d Films on (001) MgAl2O4

We report on the structural and optical properties of Fe2CrO4+d epitaxial films grown by molecular beam epitaxy on MgAl2O4 (001) as a function of ?. The average Fe valence can be correlated with the out-of-plane lattice parameter and the extent of light absorption in the infrared spectral region. Over-oxidized films (0 < d < 0.5) exhibit reduced lattice parameters and suppressed infrared absorption. We discuss the behavior of a novel infrared transition at ~0.6 eV in stoichiometric Fe2CrO4 films deposited on MgAl2O4 (MAO) at or above 400 °C. This research provides new insight into the atomic structure, optical processes, oxidation states, electronic structure, and application potentials of Fe2CrO4+d.

ellipsometry, Epitaxy, thin film, oxidation, reduc↗

Dynamic Interplay between Copper Tetramers and Iron Oxide Boosting CO2 Conversion to Methanol and Hydrocarbons under Mild Conditions.

Atomically precise subnanometer catalysts are of significant interest because of their remarkable efficiency in a variety of catalytic reactions. However, the dynamic changes of active sites under reaction conditions, in particular, the transition of cluster-oxide interface structure have not yet been well-elucidated, lacking in situ measurements. By using multiple state-of-the-art in situ characterizations, here we show a dynamic interplay between copper tetramers and iron oxides in a single-size Cu-4/Fe2O3 catalyst, yielding an enrichment of surface Cu-4-Fe2+ species under reaction conditions that boosts CO2 hydrogenation at near-atmospheric pressures. During reaction, Cu-4 clusters facilitate the reduction of Fe2O3 producing surface-rich Fe2+ species in the proximate sites. The as-formed Fe2+ species in return promotes CO2 activation and transformation over Cu4 cluster, resulting in strikingly high methanol synthesis at low temperatures and C-1/C-3 hydrocarbon production in a high-temperature regime. The discovery of highly active Cu-4-Fe2+ sites thus provides new insights for the atomic-level design of copper catalyst toward high-efficiency CO2 conversion under mild conditions.

CO2 conversion↗

Methane Oxidation to Methanol Catalyzed by Cu-Oxo Clusters Stabilized in NU-1000 Metal–Organic Framework

The catalyzed conversion of shale gas-derived light hydrocarbons, e.g. methane to methanol, for further application as automotive fuels and/or bulk chemicals is especially attractive in light of improved methods of hydrocarbon extraction. MOF based catalysts have previously been demonstrated to be active for a range of catalytic reactions. In this work we used Cu-NU1000 as a methane-to-methanol oxidation catalyst. In addition to product studies, in-situ X-ray Absorption Spectroscopic (XAS) experiments are performed under catalytic conditions in order to follow the modification of the Cu-species and directly probe the structure/activity properties of the Cu-NU1000 system. The insights reported herein serve as a first look at metal-organic framework materials as catalysts for methane oxidation and be the basis for development of the subsequent generations of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical analysis of the sequential proton-coupled electron transfer mechanisms for H2 oxidation and production pathways catalyzed by nickel molecular electrocatalysts

The design of electrocatalysts for the oxidation and production of H2 is important for the development of alternative energy sources. This paper focuses on the electrocatalysts, where denotes 1,5-diaza-3,7-diphosphacyclooctane ligands with substituent groups R and R' covalently bound to the phosphorus and nitrogen atoms, respectively. Theoretical methods are used to investigate the mechanism of the step in the catalytic cycle corresponding to – e– → for H2 oxidation and the reverse reaction for H2 production. This step involves electron transfer (ET) between the Ni complex and the electrode as well as proton transfer (PT) between the Ni and the N. The sequential mechanisms, PT–ET and ET–PT, are investigated for the following (R,R’) substituents: (Me,Me), (Ph,Ph), and (Ph,Bz), where Me, Ph, and Bz denote methyl, phenyl, and benzyl substituents. Density functional theory is used to calculate reduction potentials, pKas, and PT pathways, and Marcus theory is used to describe the electrochemical electron transfer, including the effects of solute and solvent reorganization energies. For the (Ph,Ph) and (Ph,Bz) systems, the sequential PT–ET mechanism would require surmounting a large free energy barrier for the initial PT step, followed by thermodynamically favorable or thermoneutral ET. The sequential ET–PT mechanism for these systems would require a relatively large initial applied overpotential, followed by a PT reaction with a relatively low free energy barrier. Consistent with experimental data, the calculated overpotential required for the initial reduction in the ET–PT mechanism is lower for the (Ph,Bz) system than for the (Ph,Ph) system. The concerted mechanism, in which the electron and proton transfer simultaneously without a stable intermediate, may be thermodynamically favorable and is a direction of future research. This material is based upon work supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences under FWP56073.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hydrogen Oxidation Catalysis by a Nickel Diphosphine Complex with Pendant tert-Butyl Amines

A bis-diphosphine nickel complex with t-butyl functionalized pendant amines [Ni(PCy2Nt-Bu2)2]2+ has been synthesized. It is a highly active electrocatalyst for the oxidation of hydrogen in the presence of base. The turn-over rate of 50 s 1 under 1.0 atm H2 at a potential of –0.77 V vs the ferrocene couple is 5 times faster than the rate reported heretofore for any other molecular H2 oxidation catalyst. This research was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy. Computational resources were provided by the Environmental Molecular Science Laboratory (EMSL) and the National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory.

08 HYDROGEN↗

Optimizing conditions for utilization of an H 2 oxidation catalyst with outer coordination sphere functionalities

[Ni(PCy2NArginine2)2]2+ ( CyArg ) or [Ni(PCy2NBenzyl2)2]2+ ( CyBn ) were evaluated for H 2 oxidation as a function of temperature, pressure, and solvent. 70 °C and 100 atm H 2 result in a TOF of 1.1 × 106 s -1 and an overpotential of 240 mV for CyArg in water. In methanol the rates were 280 s -1 for CyArg and 80 s -1 for CyBn , demonstrating the importance of water and the outer coordination sphere ( OCS ).

bio-inspired↗

Atomic Layer Deposition of Vanadium Oxide to Reduce Parasitic Absorption and Improve Stability in n-i-p Perovskite Solar Cells for Tandems

Two critical issues associated with semi-transparent, n-i-p perovskite solar cells for 2-terminal tandem devices are parasitic absorption and long-term instability associated with the widely used spiro-OMeTAD and MoOx hole transport and buffer layers, respectively. In this work, we present an alternative hole contact bilayer that consists of a 30 nm undoped layer of spiro-TTB in conjunction with 9 nm of air-stable vanadium oxide (VOx) deposited via atomic layer deposition. The low absorption of UV and visible light in this bilayer results in the fabrication of a semi-transparent perovskite cell with 18.9 mA cm-2 of photocurrent, a 14% increase compared to the 16.6 mA cm-2 generated in a control device with 150 nm of doped spiro-OMeTAD. The ALD VOx buffer layer shows promise as a stable alternative to MoOx; an unencapsulated Cs0.17FA0.83Pb(Br0.17I0.83)3 device with ALD VOx and ITO as the top contact maintains its efficiency following 1000 hours at 85 degrees C in a N2 environment. Lastly, we use transfer matrix modeling of the optimized perovskite stack to predict its optical performance in a monolithic tandem cell with heterojunction silicon.

14 SOLAR ENERGY↗

Efficient laser-induced 6-8 keV x-ray production from iron oxide aerogel and foil-lined cavity targets

The performance of new iron-based laser-driven x-ray sources has been tested at the OMEGA laser facility for production of x rays in the 6.5-8.5 keV range. Two types of targets were experimentally investigated: low-density iron oxide aerogels (density 6-16 mg/cm{sup 3}) and stainless steel foil-lined cavity targets (steel thickness 1-5 {mu}m). The targets were irradiated by 40 beams of the OMEGA laser (500 J/beam, 1 ns pulse, wavelength 351 nm). All targets showed good coupling with the laser, with <5% of the incident laser light backscattered by the resulting plasma in all cases (typically <2.5%). The aerogel targets produced T{sub e}=2 to 3 keV, n{sub e}=0.12-0.2 critical density plasmas yielding a 40%-60% laser-to-x-ray total conversion efficiency (CE) (1.2%-3% in the Fe K-shell range). The foil cavity targets produced T{sub e}{approx} 2 keV, n{sub e}{approx} 0.15 critical density plasmas yielding a 60%-75% conversion efficiency (1.6%-2.2% in the Fe K-shell range). Time-resolved images illustrate that the volumetric heating of low-density aerogels allow them to emit a higher K-shell x-ray yield even though they contain fewer Fe atoms. However, their challenging fabrication process leads to a larger shot-to-shot variation than cavity targets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure of graphene oxide and reduced graphene oxide monolayers

Graphene oxide (GO) monolayers obtained by Langmuir Blodgett route and suitably treated to obtain reduced graphene oxide (RGO) monolayers were studied by photoelectron spectroscopy. Upon reduction of GO to form RGO C1s x-ray photoelectron spectra showed increase in graphitic carbon content, while ultraviolet photoelectron spectra showed increase in intensity corresponding to C2p-{pi} electrons ({approx}3.5 eV). X-ray excited Auger transitions C(KVV) and plasmon energy loss of C1s photoelectrons have been analyzed to elucidate the valence band structure. The effective number of ({pi}+{sigma}) electrons as obtained from energy loss spectra was found to increase by {approx}28% on reduction of GO.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure and magnetic properties of irradiated Fe/Fe oxide core-shell nanoclusters

A cluster deposition method was used to produce a film of loosely aggregated particles of Fe-Fe3O4 core-shell nanoclusters with an 8 nm iron core size and 2 nm oxide shell thickness. The film of particles on a silicon substrate was irradiated with 5.5 MeV Si2+ ions to a fluence of 1016 cm-2 near room temperature, and computer simulations based on the SRIM (Stopping and Range of Ions in Matter) code show that the implanted Si species stops near the film-substrate interface. The ion irradiation creates a structural change in the film with corresponding chemical and magnetic changes. X-ray diffraction shows that the core size and chemistry stay the same but the shell becomes FeO that grows to a thickness of 17 nm. Helium ion microscopy shows that the previously separate particles have densified into a nearly continuous film. Major loop magnetic hysteresis measurements show a decrease in saturation magnetization that we attribute to the presence of the antiferromagnetic (AFM) FeO shell. First-order reversal curve measurements on the irradiated film performed with a vibrating sample magnetometer show that the AFM shell prevents the particles from interacting magnetically, leading to low coercivity from the iron core and little bias field from the core interactions. These results, and others reported previously on different compositions (Fe3O4 or FeO+Fe3N nanoclusters), show that the ion irradiation behavior of nanocluster films such as these depends strongly on the initial nanostructure and chemistry.

Environmental Molecular Sciences Laboratory↗