Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nonlinear modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

A nonlinear data-driven reduced order model for computational homogenization with physics/pattern-guided sampling

Developing an accurate nonlinear reduced order model from simulation data has been an outstanding research topic for many years. For many physical systems, data collection is very expensive and the optimal data distribution is not known in advance. Thus, maximizing the information gain remains a grand challenge. In a recent paper, Bhattacharjee and Matouš (2016) proposed a manifold-based nonlinear reduced order model for multiscale problems in mechanics of materials. Expanding this work here, we develop a novel sampling strategy based on the physics/pattern-guided data distribution. Our adaptive sampling strategy relies on enrichment of sub-manifolds based on the principal stretches and rotational sensitivity analysis. This novel sampling strategy substantially decreases the number of snapshots needed for accurate reduced order model construction (i.e., ~5 x reduction of snapshots over Bhattacharjee and Matouš (2016)). Moreover, we build the nonlinear manifold using the displacement rather than deformation gradient data. We provide rigorous verification and error assessment. We demonstrate both localization and homogenization of the multiscale solution on a large particulate composite unit cell.

97 MATHEMATICS AND COMPUTING↗

Nonlinear Logistic Regression Mixture Experiment Modeling for Binary Data Using Dimensionally Reduced Components

This article presents and illustrates an approach using nonlinear logistic regression for modeling binary response data from a mixture experiment when the components can be partitioned into groups used to form dimensionally-reduced pseudocomponents (DRPs). A DRP is a linear combination of the components in a group, where the linear combinations over all groups are normalized so that the DRP proportions sum to unity. Nonlinear logistic regression is required because, after normalization of the linear combinations, the model expressed in terms of the DRPs is nonlinear in the parameters that specify the linear combinations. A method for obtaining nonparametric tolerance limits on the probability of a “success” for the binary response variable using a bootstrap approach is also presented. Having three DRPs enables viewing data and modeling results on a ternary plot even though there may be many more than three mixture components. A real database, involving whether or not nepheline crystals form in simulated nuclear waste glass after cooling, is used to illustrate the nonlinear logistic regression modeling and nonparametric tolerance limit approaches when there are three DRPs.

Waste glass, Nepheline, Mixture experiment, Logist↗

Practical Aspects of Real-Time Modeling for the Learn-To-Fly Concept

Practical aspects of autonomous onboard real-time modeling for the NASA Learn-to-Fly concept are examined using flight data from two subscale test aircraft. A practical real-time global nonlinear aerodynamic modeling method is developed and explained, along with the multiple-input excitation needed for effective real-time modeling. Critical issues for integrating real-time global nonlinear aerodynamic modeling and local linear modeling with the real-time learning adaptive control and guidance elements of the Learn-to-Fly algorithm are identified and discussed. Real-time modeling results from NASA Learn-to-Fly flight demonstrations are presented and evaluated using model fit metrics and prediction tests.

Morelli, Eugene A.↗

The Effect of Faster Engine Response on the Lateral Directional Control of a Damaged Aircraft

The integration of flight control and propulsion control has been a much discussed topic, especially for emergencies where the engines may be able to help stabilize and safely land a damaged aircraft. Previous research has shown that for the engines to be effective as flight control actuators, the response time to throttle commands must be improved. Other work has developed control modes that accept a higher risk of engine failure in exchange for improved engine response during an emergency. In this effort, a nonlinear engine model (the Commercial Modular Aero-Propulsion System Simulation 40k) has been integrated with a nonlinear airframe model (the Generic Transport Model) in order to evaluate the use of enhanced-response engines as alternative yaw rate control effectors. Tests of disturbance rejection and command tracking were used to determine the impact of the engines on the aircraft's dynamical behavior. Three engine control enhancements that improve the response time of the engine were implemented and tested in the integrated simulation. The enhancements were shown to increase the engine s effectiveness as a yaw rate control effector when used in an automatic feedback loop. The improvement is highly dependent upon flight condition; the airframe behavior is markedly improved at low altitude, low speed conditions, and relatively unchanged at high altitude, high speed.

May, Ryan D.↗

Active Flutter Suppression Controllers Derived from Linear and Nonlinear Aerodynamics: Application to a Transport Aircraft Model

Active flutter suppression has been demonstrated in simulation by many researchers, generally using methods based on linear aerodynamics and often with simplistic geometries. In this paper, active flutter suppression is demonstrated in a simulation using a Navier-Stokes aerodynamics code, FUN3D (Fully Unstructured Navier-Stokes Three-Dimensional), and a realistic transport aircraft configuration. This is accomplished using simple observer-feedback controllers derived from linear aeroelastic models, including reduced order models built via FUN3D data. The development of these reduced order models is described here. It is shown that controllers derived from reduced order models of the nonlinear aerodynamics outperform controllers based on linear aerodynamics.

Waite, Josiah M.↗

Exact Magnetic Knots Induced by Ferreira's Hopfions

The magnetic knots induced by Ferreira's Hopf soliton solutions of a conformal nonlinear sigma model are discussed. The charge and current densities for the case with Hopf index 3 is investigated analytically and numerically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling without categorical variables : a mixed-integer nonlinear program for the optimization of thermal insulation systems.

Optimal design applications are often modeled by using categorical variables to express discrete design decisions, such as material types. A disadvantage of using categorical variables is the lack of continuous relaxations, which precludes the use of modern integer programming techniques. We show how to express categorical variables with standard integer modeling techniques, and we illustrate this approach on a load-bearing thermal insulation system. The system consists of a number of insulators of different materials and intercepts that minimize the heat flow from a hot surface to a cold surface. Our new model allows us to employ black-box modeling languages and solvers and illustrates the interplay between integer and nonlinear modeling techniques. We present numerical experience that illustrates the advantage of the standard integer model.

97 MATHEMATICS AND COMPUTING↗

Shaker-structure interaction modeling and analysis for nonlinear force appropriation testing

Nonlinear force appropriation is an extension of its linear counterpart where sinusoidal excitation is applied to a structure with a modal shaker and phase quadrature is achieved between the excitation and response. While a standard practice in modal testing, modal shaker excitation has the potential to alter the dynamics of the structure under test. Previous studies have been conducted to address several concerns, but this work specifically focuses on a shaker-structure interaction phenomenon which arises during the force appropriation testing of a nonlinear structure. Under pure-tone sinusoidal forcing, a nonlinear structure may respond not only at the fundamental harmonic but also potentially at sub- or superharmonics, or it can even produce aperiodic and chaotic motion in certain cases. Shaker-structure interaction occurs when the response physically pushes back against the shaker attachment, producing non-fundamental harmonic content in the force measured by the load cell, even for pure tone voltage input to the shaker. This work develops a model to replicate these physics and investigates their influence on the response of a nonlinear normal mode of the structure. Experimental evidence is first provided that demonstrates the generation of harmonic content in the measured load cell force during a force appropriation test. This interaction is replicated by developing an electromechanical model of a modal shaker attached to a nonlinear, three-mass dynamical system. Several simulated experiments are conducted both with and without the shaker model in order to identify which effects are specifically due to the presence of the shaker. Finally, the results of these simulations are then compared to the undamped nonlinear normal modes of the structure under test to evaluate the influence of shaker-structure interaction on the identified system’s dynamics.

42 ENGINEERING↗

Compact merons and skyrmions in thin chiral magnetic films

A meron is a controversial topological excitation because it carries just one-half of the skyrmion number. A vortex in thin magnetic films has been argued to be a half-skyrmion, i.e., a meron. We present another type of merons, investigating the two-dimensional nonlinear sigma model together with the Dzyaloshinskii-Moriya interaction. Here, the vortex number of a meron is zero. Basic topological excitations are merons and skyrmions. They behave as if they were free particles. A prominent feature is that the topological charge density is strictly confined within compact domains. We propose an analytic approach for these compact excitations, and construct a phase diagram. It is comprised of the helix, meron, skyrmion-crystal, skyrmion-gas, and ferromagnet phases. It captures the essential nature of the experimental data recently performed in chiral magnets such as MnSi and FeCoSi thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hadron-quark phase transition in asymmetric matter with boson condensation

In the present work we study the hadron-quark phase transition with boson condensation in asymmetric matter by investigating the binodal surface and extending it to finite temperature to mimic the QCD phase diagram. We consider a system with two conserved charges (isospin and baryon densities) using the Gibbs' criteria for phase equilibrium. To obtain these conditions we use two different models for the two possible phases, namely, the nonlinear Walecka model (NLWM) for the hadron matter (also including hyperons) and the MIT bag model for the quark phase. It is shown that the phase transition is very sensitive to the density dependence of the equation of state and the symmetry energy. For an isospin asymmetry of 0.2 and a mixed phase with a fraction of 20% of quarks, a transition density in the interval 2{rho}{sub 0}<{rho}{sub t}<4{rho}{sub 0} was obtained for temperatures 30<T<65 MeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Giant Skyrmions Stabilized by Dipole-Dipole Interactions in Thin Ferromagnetic Films

Motivated by a recent magnetization reversal experiment on a TbFeCo thin film, we study a topological excitation in the anisotropic nonlinear sigma model together with the Zeeman and magnetic dipole-dipole interactions. Dipole-dipole interactions turn a ferromagnet into a frustrated spin system, which allows a nontrivial spin texture such as a giant Skyrmion. We derive an analytic formula for the Skyrmion radius. The radius is controllable by the external magnetic field. It is intriguing that a Skyrmion may have already been observed as a magnetic domain. A salient feature is that a single Skyrmion can be created or destroyed experimentally. An analysis is made also on Skyrmions in chiral magnets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The nonlinear dynamics of a spacecraft coupled to the vibration of a contained fluid

The dynamics of a linear spacecraft mode coupled to a nonlinear low gravity slosh of a fluid in a cylindrical tank is investigated. Coupled, nonlinear equations of motion for the fluid-spacecraft dynamics are derived through an assumed mode Lagrangian method. Unlike linear fluid slosh models, this nonlinear slosh model retains two fundamental slosh modes and three secondary modes. An approximate perturbation solution of the equations of motion indicates that the nonlinear coupled system response involves fluid-spacecraft modal resonances not predicted by either a linear, or a nonlinear, uncoupled slosh analysis. Experimental results substantiate the analytical predictions.

Peterson, Lee D.↗

Nonlinear probabilistic finite element models of laminated composite shells

A probabilistic finite element analysis procedure for laminated composite shells has been developed. A total Lagrangian finite element formulation, employing a degenerated 3-D laminated composite shell with the full Green-Lagrange strains and first-order shear deformable kinematics, forms the modeling foundation. The first-order second-moment technique for probabilistic finite element analysis of random fields is employed and results are presented in the form of mean and variance of the structural response. The effects of material nonlinearity are included through the use of a rate-independent anisotropic plasticity formulation with the macroscopic point of view. Both ply-level and micromechanics-level random variables can be selected, the latter by means of the Aboudi micromechanics model. A number of sample problems are solved to verify the accuracy of the procedures developed and to quantify the variability of certain material type/structure combinations. Experimental data is compared in many cases, and the Monte Carlo simulation method is used to check the probabilistic results. In general, the procedure is quite effective in modeling the mean and variance response of the linear and nonlinear behavior of laminated composite shells.

Engelstad, S. P.↗

NONLINEAR FORCE-FREE FIELD MODELING OF A SOLAR ACTIVE REGION USING SDO/HMI AND SOLIS/VSM DATA

We use SDO/HMI and SOLIS/VSM photospheric magnetic field measurements to model the force-free coronal field above a solar active region, assuming magnetic forces dominate. We take measurement uncertainties caused by, e.g., noise and the particular inversion technique, into account. After searching for the optimum modeling parameters for the particular data sets, we compare the resulting nonlinear force-free model fields. We show the degree of agreement of the coronal field reconstructions from the different data sources by comparing the relative free energy content, the vertical distribution of the magnetic pressure, and the vertically integrated current density. Though the longitudinal and transverse magnetic flux measured by the VSM and HMI is clearly different, we find considerable similarities in the modeled fields. This indicates the robustness of the algorithm we use to calculate the nonlinear force-free fields against differences and deficiencies of the photospheric vector maps used as an input. We also depict how much the absolute values of the total force-free, virial, and the free magnetic energy differ and how the orientation of the longitudinal and transverse components of the HMI- and VSM-based model volumes compare to each other.

79 ASTRONOMY AND ASTROPHYSICS↗

Covariances and spectra of the kinematics and dynamics of nonlinear waves

Using the Stokes waves as a model of nonlinear waves and considering the linear component as a narrow-band Gaussian process, the covariances and spectra of velocity and acceleration components and pressure for points in the vicinity of still water level were derived taking into consideration the effects of free surface fluctuations. The results are compared with those obtained earlier using linear Gaussian waves.

Tung, C. C.↗

Computation of Static Shapes and Voltages for Micromachined Deformable Mirrors with Nonlinear Electrostatic Actuators

In modeling micromachined deformable mirrors with electrostatic actuators whose gap spacings are of the same order of magnitude as those of the surface deformations, it is necessary to use nonlinear models for the actuators. In this paper, we consider micromachined deformable mirrors modeled by a membrane or plate equation with nonlinear electrostatic actuator characteristics. Numerical methods for computing the mirror deformation due to given actuator voltages and the actuator voltages required for producing the desired deformations at the actuator locations are presented. The application of the proposed methods to circular deformable mirrors whose surfaces are modeled by elastic membranes is discussed in detail. Numerical results are obtained for a typical circular micromachined mirror with electrostatic actuators.

Wang, P. K. C.↗

Nonlinear Dynamics of a Helicopter Model in Ground Resonance

An approximate theoretical method is presented which determined the limit cycle behavior of a helicopter model which has one or two nonlinear dampers. The relationship during unstable ground resonance oscillations between lagging motion of the blades and fuselage motion is discussed. An experiment was carried out on using a helicopter scale model. The experimental results agree with those of the theoretical analysis.

Tang, D. M.↗