Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “metallic components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62

Component Development for Alkaline URFCs

Performance, cost, and durability of the catalyst materials are the key factors that govern commercialization of H 2 -based energy conversion devices such as unitized regenerative fuel cells (URFCs). Compared to existing battery systems, URFCs offer superior energy density and performance over prolonged operation. In addition, alkaline URFC systems, can utilize low-cost platinum group metal-free (PGM-free) catalysts, resulting in much lower overall system costs. This project seeks to address the major obstacles faced in URFC systems such as cost and efficiency and establish a URFC technical capability through the strategic partnership between UofSC and SRNL. The research focuses on the development of low-PGM and PGM-free based bifunctional oxygen catalysts and electrodes, as well as the development of a URFC testing capability at SRNL.

25 ENERGY STORAGE↗

Strategic Melamine Coating on Lithium Metal for Li 3 N-Rich Solid Electrolyte Interphase and Improved Battery Cycling Stability

The practical applications of lithium (Li) metal batteries (LMBs) are limited by challenges such as dendrite formation and unstable solid electrolyte interphase (SEI), especially at higher C-rates. Here, this study introduces melamine-coated Li metal anodes (LMAs), forming a Li 3 N-rich SEI layer that improves ionic conductivity and mechanical stability. The optimized melamine-coated LMA demonstrated uniform coverage resulting in denser Li deposition, nearly doubled cycle life (~148 cycles at 0.5 C, 1C = 4.1 mA cm -2 ), compared to Bare-Li. These findings emphasize that coating materials-induced beneficial SEI components could lead to improvement of LMB performance.

Batteries↗

Tunable, Homoepitaxial Hyperbolic Metamaterials Enabled by High Mobility CdO

We report propagating light exhibits hyperbolicity in strongly anisotropic materials where the principal components of the dielectric tensor are opposite in sign. While hyperbolicity occurs naturally in anisotropic polar dielectrics, wherein optical phonons along orthogonal crystal axes are nondegenerate, such optical anisotropy can also be engineered in hyperbolic metamaterials (HMMs): thin film superlattices of alternating dielectric and metallic layers. Contrasted with the severely limited tunability of natural hyperbolic materials, the hyperbolic behavior of HMMs can be tailored significantly both through superlattice design and material selection. However, so far HMMs have suffered from high optical losses, hindering their performance. In this report, broadly tunable (λ = 2–5 µm) Type I and II hyperbolic modes with low losses (quality (Q)-factors up to 19.7) are observed through attenuated total reflectance measurements of monolithic, homoepitaxial superlattices of high- and low-doped cadmium oxide (CdO). Further, the low losses offered by CdO enable the first demonstration of real-space imaging of hyperbolic plasmon polaritons in nanoresonators by scattering-type scanning near-field optical microscopy—previously only possible for hyperbolic phonon polariton materials. Tunable, low-loss CdO HMMs promise designability for applications such as on-chip photonics, super-resolution imaging (hyperlensing), enhanced emission, novel emitter designs, and possibly quantum nanophotonic and time variant metasurfaces.

36 MATERIALS SCIENCE↗

Integrated top-down process and voxel-based microstructure modeling for Ti-6Al-4V in laser wire direct energy deposition process

Laser-wire metal additive manufacturing (AM) is one of the ideal direct energy deposition (DED) processes for creating large-scale parts with a medium level of complexity. However, the DED process involves complex thermal signatures and wide length scales making the fabrication of realistic AM components and part qualification often reliant on experimental trial-and-error optimization. While experimental measurements over the full volume of a part are valuable and necessary, measuring the entire area of a part is significantly laborious and practically infeasible, particularly for large parts in terms of cost and rapid qualification. Therefore, in this work, we developed an effective thermal and microstructure modeling framework based on the Johnson–Mehl-Avrami-Kolmogorov (JMAK) and Koistinen & Marburger (KM) models through a top-down approach that considers plate distortion-affected thermal profiles. A voxel-by-voxel simulation method is used to predict individual phase fractions of Ti-6Al-4 V. The predicted results were validated through detailed metallurgical measurements. A combined voxel-by-voxel approach with a sparse data reconstruction technique produced a near-perfect reconstruction of the original data. This approach anticipates a significant reduction in data points and computation time and resources. Lastly, we conclude with potential extensions of this work to other modeling efforts.

36 MATERIALS SCIENCE↗

Powder metallurgy hot isostatic pressing - workshop report

The findings of the powder metallurgy (PM) hot isostatic pressing (HIP) workshop confirmed that the accelerated adoption of this technology requires the following action items: 1. By 2035, the HIP infrastructure must be scaled to sizes larger than 4 .0 meters for manufacturing components relevant to energy and defense industries at large. 2. The community must develop cost-effective and agile standards, qualifications, and certification pathways for these HIP parts. 3. At the same time, domestic powder production should be expanded to a wide range of metallic alloys, including Cr-Mo steels, stainless steels, and titanium- and nickel-based superalloys, as well as to emerging alloy classes in the refractory space. 4. The above initiatives can be enhanced by implementing digital modeling and controls, including AI-driven simulations, in situ monitoring, and digital twins.

36 MATERIALS SCIENCE↗

Sustainable chemistry with plasmonic photocatalysts

There is a pressing global need to increase the use of renewable energy sources and limit greenhouse gas emissions. Towards this goal, highly efficient and molecularly selective chemical processes that operate under mild conditions are critical. Plasmonic photocatalysis uses optically resonant metallic nanoparticles and their resulting plasmonic, electronic, and phononic light-matter interactions to drive chemical reactions. The promise of simultaneous high-efficiency and product-selective reactions with plasmon photocatalysis provides a compelling opportunity to rethink how chemistry is achieved. Plasmonic nanoparticles serve as nanoscale ‘antennas’ that enable strong light–matter interactions, surpassing the light-harvesting capabilities one would expect purely from their size. Complex composite structures, combining engineered light harvesters with more chemically active components, are a focal point of current research endeavors. In this review, we provide an overview of recent advances in plasmonic catalysis. We start with a discussion of the relevant mechanisms in photochemical transformations and explain hot-carrier generation and distributions from several ubiquitous plasmonic antennae. Then we highlight three important types of catalytic processes for sustainable chemistry: ammonia synthesis, hydrogen production and CO 2 reduction. To help elucidate the reaction mechanism, both state-of-art electromagnetic calculations and quantum mechanistic calculations are discussed. This review provides insights to better understand the mechanism of plasmonic photocatalysis with a variety of metallic and composite nanostructures toward designing and controlling improved platforms for green chemistry in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interactions and immobilization of lanthanides with dopants in uranium-based metallic fuels

In uranium-based fuels, production and migration of lanthanide fission products and subsequent chemical interactions with cladding constituents lead to fuel–cladding chemical interaction (FCCI), limiting fuel performance. In general, dopant addition to the fuel matrix to arrest lanthanides within the fuel by forming intermetallics is found to be effective in mitigating FCCI. Recently, we proposed ab-initio based alloy-design principles, which can be useful in identifying dopant(s) that can bind a lanthanide (Nd) inside the fuel matrix. Here, we demonstrate the robustness of such principles by performing a systematic study to choose dopants to form compounds with a range of experimentally-observed lanthanide fission products. Results reveal that for a given dopant, lanthanide Ce and La exhibit similar behavior in their compound-forming tendencies compared to Nd and Pr, which is linked to lanthanide intrinsic characteristics such as the electronic configurations. Our predicted lanthanide-dopant intermetallic formation is verified experimentally in selective cases. Finally, we showed alloy design principles that accurately identify previously known dopants like Pd, and also predict new dopants As and Se, that can be effective in binding all lanthanides within the uranium matrix. Altogether, this research helps to develop generic alloy-design principles for complex multi-component systems based on lanthanide and dopant intrinsic characteristics.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Bond Dissociation Energy, Ionization Energy, and Electronic Structure of Thorium Dimer

Diatomic thorium, Th 2 , has been investigated using a laser ablation, supersonic expansion source to produce the molecule and resonant two-photon ionization spectroscopy to measure its bond dissociation energy (BDE) and ionization energy (IE). The molecule has a high density of states in the vicinity of its bond dissociation energy, leading to rapid predissociation as soon as this energy is exceeded. The BDE is identified from this predissociation threshold as D 0 (Th 2 ) = 2.857(7) eV, where the assigned error limit is provided in parentheses in units of the last quoted digit. Similarly, the one-photon ionization threshold has been measured, providing the ionization energy IE(Th 2 ) = 5.042(4) eV. Together with a thermochemical cycle and the atomic ionization energy, these values provide the BDE of the cation, giving D 0 (Th 2 + ) = 4.122(8) eV. Computations show that Th 2 has three nearly degenerate low-lying electronic states (1 3 Σ u + , 1 1 Σ g + , and 1 3 Δ g ) with bonding dominated by 7s and 6d orbitals, indicating predominantly transition-metal-like behavior. The 1 3 Σ u + state exhibits a triple bond, whereas the 1 1 Σ g + and 1 3 Δ g states possess quadruple-bond character and correspondingly shorter bonds. Although 1 3 Σ u + is predicted to be the lowest state without spin–orbit coupling, the large spin–orbit stabilization of the 1 3 Δ g state makes its Ω = 1 g component the ground state. Furthermore, the calculated dissociation energy (2.840 eV) and ionization energy of Th 2 (5.098 eV) are both in excellent agreement with experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent-Free Self-Assembly for Scalable Preparation of Highly Crystalline Mesoporous Metal Oxides

Mesoporous metal oxides (MMOs) have been demonstrated great potential in various applications. Up to now, the direct synthesis of MMOs is still limited to the solvent induced inorganic-organic self-assembly process. In this work, we develop a facile, general, and high throughput solvent-free self-assembly strategy to synthesize a series of MMOs including single-component MMOs and multi-component MMOs (e.g., doped MMOs, composite MMOs, and polymetallic oxide) with high crystallinity and remarkable porous properties by grinding and heating raw materials. Compared with the traditional solution self-assembly process, the avoidance of solvents in this method not only greatly increases the yield of target products and synthesis efficiency, but also reduces the environmental pollution and the consumption of cost and energy. We believe the presented approach will pave a new avenue for scalable production of advanced mesoporous materials for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic phase transitions in Eu(Co 1-x Nix) 2-y As 2 single crystals

The effects of Ni doping in Eu(Co 1-x Ni x ) 2-y As 2 single crystals with x = 0 to 1 grown out of self flux are investigated via crystallographic, electronic transport, magnetic, and thermal measurements. All compositions adopt the body-centered-tetragonal ThCr 2 Si 2 structure with space group I 4= mmm . Here, we also find 3-4% of randomly-distributed vacancies on the Co/Ni site. Anisotropic magnetic susceptibility $\chi$α (α = ab; c) data versus temperature T show clear signatures of an antiferromagnetic (AFM) c-axis helix structure associated with the Eu +2 spins-7/2 for x = 0 and x = 1 as previously reported. The $\chi$α (T) data for x = 0.03 and 0.10 suggest an anomalous 2 q magnetic structure containing two helix axes along the c axis and in the ab plane, respectively, whereas for x = 0.75, 0.82, and 1 a c-axis helix is inferred as previously found for x = 1. At intermediate compositions x = 0:2, 0.32, 0.42, 0.54, and 0.65 a magnetic structure with a large ferromagnetic (FM) c-axis component is found from magnetization versus fi eld isotherms, suggested to be an incommensurate FM cone structure associated with the Eu spins, which consists of both AFM and FM components. In addition, the $\chi$ (T) and heat capacity C p (T) data for x = 0.2-0.65 indicate the occurrence of itinerant FM order associated with the Co/Ni atoms with Curie temperatures from 60 K to 25 K, respectively. Electrical resistivity ρ(T) measurements indicate metallic character for all compositions with abrupt increases in slope on cooling below the Eu AFM transition temperatures. In addition to this panoply of magnetic transitions, 151 Eu Mössbauer measurements indicate that ordering of the Eu moments proceeds via an incommensurate sine amplitude-modulated structure with additional transition temperatures associated with this effect.

36 MATERIALS SCIENCE↗

Alternative Rear Contacts for Ultrathin CdSexTe1-x Solar Cells

The back contact is a key component for further developments of CdSeTe solar cells. In this contribution, we investigate several materials and designs that could help the development of highly-reflective, ohmic back contacts for conventional (3.45 um) and thin (800 nm) CdSeTe solar cells. We also explore numerically, nanostructured metal back contacts for light-trapping in ultrathin (200 nm) CdTe solar cells.

back contact↗

Methanogens acquire and bioaccumulate nickel during reductive dissolution of nickelian pyrite

ABSTRACT Nickel (Ni) is a key component of the active site metallocofactors of numerous enzymes required for methanogenesis, including [NiFe]-hydrogenase, carbon monoxide dehydrogenase, and methyl CoM reductase, leading to a high demand for Ni among methanogens. However, methanogens often inhabit euxinic environments that favor the sequestration of nickel as metal-sulfide minerals, such as nickelian pyrite [(Ni,Fe)S 2 ], that have low solubilities and that are not considered bioavailable. Recently, however, several different model methanogens ( Methanosarcina barkeri , Methanococcus voltae , Methanococcus maripaludis ) were shown to reductively dissolve pyrite (FeS 2 ) and to utilize dissolution products to meet iron and sulfur biosynthetic demands. Here, using M. barkeri Fusaro, and laboratory-synthesized (Ni,Fe)S 2 that was physically isolated from cells using dialysis membranes, we show that trace nickel (<20 nM) abiotically solubilized from the mineral can support methanogenesis and limited growth, roughly fivefold less than the minimum concentration known to support methanogenesis. Furthermore, when provided direct contact with (Ni,Fe)S 2 , M. barkeri promoted the reductive dissolution of (Ni,Fe)S 2 and assimilated solubilized nickel, iron, and sulfur as its sole source of these elements. Cells that reductively dissolved (Ni,Fe)S 2 bioaccumulated approximately fourfold more nickel than those grown with soluble nickel and sulfide but had similar metabolic coupling efficiencies. While the mechanism for Ni uptake in archaeal methanogens is not known, homologs of the bacterial Nik uptake system were shown to be ubiquitous across methanogen genomes. Collectively, these observations indicate that (Ni,Fe)S 2 is bioavailable in anoxic environments and that methanogens can convert this mineral into nickel-, iron-, and sulfur-containing metalloenzymes to support methanogenesis and growth. IMPORTANCE Nickel is an essential metal, and its availability has changed dramatically over Earth history due to shifts in the predominant type of volcanism in the late Archean that limited its availability and an increase in euxinic conditions in the early Proterozoic that favored its precipitation as nickel sulfide minerals. Observations presented herein indicate that the methanogen, Methanosarcina barkeri , can acquire nickel at low concentration (<20 nM) from soluble and mineral sources. Furthermore, M. barkeri was shown to actively reduce nickelian pyrite; use dissolution products to meet their iron, sulfur, and nickel demands; and bioaccumulate nickel. These data help to explain how M. barkeri (and possibly other methanogens and anaerobes) can acquire nickel in contemporary and past anoxic or euxinic environments.

(NiFe)S2↗

Effect of thermal aging and irradiation on microstructure and crack growth response of Alloy 690

Nickel-base Alloy 690 and the associated weld Alloys 52 and 152 are typically used for nozzle penetrations in replacement heads for pressurized water reactor (PWR) vessels, because of their excellent overall resistance to general corrosion and environmental degradation, primarily stress corrosion cracking (SCC). However, many of the existing PWRs reactors are expected to operate for 40-80 years. Likewise, advanced water-cooled small modular reactors (SMRs) will use Ni-Cr alloys and are expected to receive initial operating licenses for 60 years. Hence, the thermal stability of Ni-Cr alloys is a potential concern for the long-term performance of both existing and advanced nuclear plants, and possibly spent fuel storage containers. The objective of this research is to understand the microstructural changes occurring in high-Cr, Ni-based Alloy 690 during long time exposure to the reactor operating temperatures, and the effect of these changes on the service performance. One area of particular concern is the potential for long range ordering (LRO), i.e. formation of the intermetallic Ni 2 Cr phase under prolonged exposure to reactor temperatures and/or irradiation, which can increase strength, decrease ductility, and cause dimensional changes or lead to in-service embrittlement of components made with these alloys. Hence, this research focused on the microstructural evolution and the SCC response of Alloy 690 under accelerated thermal aging and irradiation conditions. The materials studied involved Alloy 690 from two sources: (i) Alloy 690 plate from an Alloy 152 dissimilar metal weld (DMW) joining the Alloy 690 plate to Alloy 533 LAS, aged at three different temperatures (370°C, 400°C and 450°C) for up to 75,000h (equivalent to 60 years of service), and (ii) specimens neutron-irradiated in the BOR-60 reactor up to 40 dpa. For aged Alloy 690 specimens, hardness was found to increase with aging time, however, the microstructural characterization by means of synchrotron X-ray did not find evidence of LRO. The microstructural characterization of neutron-irradiated specimens by TEM found no evidence of LRO either. Testing in a primary water environment of Alloy 690 specimens aged to a 60-year service equivalent revealed a fatigue and corrosion fatigue crack growth responses similar to those measured on the un-aged alloy. The SCC CGR response was also low. Overall, the two Alloy 690 heats investigated in this work, aged up to 60-year service equivalents or exposed to neutron irradiation up to 40 dpa, did not exhibit a deterioration in microstructure or performance.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Upgrade of Gamma Spectrometry Systems for ORNL TRISO Fuel PIE

Gamma spectrometry is a key element in much of the post-irradiation examination (PIE) work performed under the Advanced Gas Reactor Fuel Development and Qualification (AGR) Program (Demkowicz et al. 2015; Stempien et al. 2021). Gamma spectrometers are integrated into three major capabilities used at the Oak Ridge National Laboratory (ORNL) Irradiated Fuels Examination Laboratory (IFEL) for PIE of tristructural-isotropic (TRISO) coated particles and fuel compacts: the Core Conduction Cooldown Test Facility (CCCTF), the Vertical Counting System (VCS), and the Irradiated Microsphere Gamma Analyzer (IMGA). The CCCTF includes liquid-nitrogen-cooled traps to extract 85 Kr out of the He sweep gas that passes through the furnace in which the fuel compacts are heated during safety testing. Analysis of the 85 Kr activity in the traps is the primary indicator for TRISO failure during safety testing. The VCS is a system used to accurately measure gamma emission from components placed in a lead-shielded chamber. It is used to count the CCCTF deposition cups after removal from furnace. Each cup resides in the CCCTF furnace for typically 12–24 h and is periodically replaced with a fresh cup throughout the safety test. Metallic fission products collect on the water-cooled cups and several gamma-emitting isotopes ( 110 mAg, 134 Cs, 137 Cs, 154 Eu, and 155 Eu) are often measured and provide indication of the retention performance of the TRISO coatings. The VCS is also used to measure the presence of these isotopes on the CCCTF tantalum liner and sweep gas inlet tube for the determination of cup collection efficiency, as well as support other gamma spectrometry needs related to calibration of the 85 Kr fission gas traps and various other special PIE tasks. The IMGA uses gamma spectrometry to measure the inventory of gamma-emitting isotopes in individual TRISO particles. An automated particle handling system within the IMGA hot cell removes each particle from a source vial and positions it in front of a gamma detector, and output from the gamma spectrometer is used by the IMGA software to determine a destination vial such that particles are sorted according to their inventory and retention characteristics. At the conclusion of the AGR-1 and AGR-2 PIE campaigns, the gamma spectrometer systems used at ORNL to support that PIE had reached the end of its life cycle due to gradual obsolescence of the hardware and software. Upgrade of the Canberra Genie 2000 software used by these systems to a Windows 10 version was not a viable option, because the newest Windows 10 version offered by Mirion (the new owner of the Canberra technology) did not include the dynamic-link libraries (DLLs) needed for integration with the custom PIE software used with the CCCTF and IMGA, and Mirion had no current plans for development and release of Windows 10 versions of these DLLs with the Model S560 Genie 2000 Programming Library. Ultimately a switch was made to ORTEC gamma spectrometry systems, which appeared to be a more sustainable solution due to more proactive vendor support. The ORTEC conversion involved replacing the aging detector preamplifier and multichannel analyzer (MCA) hardware, upgrading the obsolete Windows 7 computers to Windows 10 compatible models, adopting ORTEC GammaVision software, and extensive modification of the ORNL-developed Visual Basic .NET (VB.NET) programs that provide the CCCTF and IMGA user interfaces.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Underground Imaging by Sub-Terahertz Radiation

Sub-terahertz ground-penetrating radar systems offer an alternative to radio wave-based systems in the airborne imaging of buried objects. Laboratory prototype systems operating in W-band (75–110 GHz) and F-band (90–140 GHz) are presented, detecting the distance between target and source and imaging metal objects buried in mixed soil. The experimental results show that imaging in the 100–150 GHz frequency range is feasible for underground applications but significantly restricted by the attenuation characteristics of the medium covering the targets. A higher power source and more sensitive receiving components are essential to increase the penetration capability and expand the application settings of this approach.

42 ENGINEERING↗

Thermal stability of oxidized ultrathin Li films on TZM for plasma facing components

For improved understanding of the behavior of Li plasma facing components (PFCs) in the presence of oxygen impurities, we report on the thermal stability of ultrathin (up to 1.0 nm) LiO x films on a titanium-zirconium-molybdenum (TZM) alloy substrate over the temperature range of 310–1400 K. LiO x films were prepared by either post-oxidation of Li films or Li films deposited on an oxygen-precovered TZM surface. Thermal stability of these films was studied using a combination of temperature programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and low-energy ion scattering (LEIS). For post-oxidized Li films, TPD showed that no Li desorption occurred until temperatures above 620 K, and then Li desorbed from the surface via at least three desorption peaks. The O 1s XPS spectra on the post-oxidized films at 310 K indicate the formation of lithium oxide (Li2O) and peroxide/hydroxide (Li 2 O 2 /LiOH). The peroxide/hydroxide converts to oxide after heating to 680 K with no desorption of Li or O 2 , and then this film decomposes to liberate Li into the gas phase while leaving oxygen at the TZM surface. Heating the LiO x films to 1070 K led to a solid-state reaction with surface Mo atoms of the substrate to form a condensed binary lithium molybdenum oxide (LixMoOy) phase, which upon further heating decomposed to liberate gas phase binary lithium molybdenum oxide species. Li deposition on an oxygen-precovered TZM surface formed a complex, highly stable, oxygen rich, Li-O-Mo interfacial oxide. Li desorption from multilayer Li films on oxygen-precovered TZM surfaces occurred in a metallic Li multilayer peak and three other oxide-derived peaks. These results support the improved thermal stability of oxidized lithium as compared to metallic Li and have implications for Mo impurity transport into the plasma at high temperatures.

36 MATERIALS SCIENCE↗

Heterologous expression of a fully active Azotobacter vinelandii nitrogenase Fe protein in Escherichia coli

ABSTRACT The functional versatility of the Fe protein, the reductase component of nitrogenase, makes it an appealing target for heterologous expression, which could facilitate future biotechnological adaptations of nitrogenase-based production of valuable chemical commodities. Yet, the heterologous synthesis of a fully active Fe protein of Azotobacter vinelandii ( Av NifH) in Escherichia coli has proven to be a challenging task. Here, we report the successful synthesis of a fully active Av NifH protein upon co-expression of this protein with Av IscS/U and Av NifM in E. coli . Our metal, activity, electron paramagnetic resonance, and X-ray absorption spectroscopy/extended X-ray absorption fine structure (EXAFS) data demonstrate that the heterologously expressed Av NifH protein has a high [Fe 4 S 4 ] cluster content and is fully functional in nitrogenase catalysis and assembly. Moreover, our phylogenetic analyses and structural predictions suggest that Av NifM could serve as a chaperone and assist the maturation of a cluster-replete Av NifH protein. Given the crucial importance of the Fe protein for the functionality of nitrogenase, this work establishes an effective framework for developing a heterologous expression system of the complete, two-component nitrogenase system; additionally, it provides a useful tool for further exploring the intricate biosynthetic mechanism of this structurally unique and functionally important metalloenzyme. IMPORTANCE The heterologous expression of a fully active Azotobacter vinelandii Fe protein (AvNifH) has never been accomplished. Given the functional importance of this protein in nitrogenase catalysis and assembly, the successful expression of AvNifH in Escherichia coli as reported herein supplies a key element for the further development of heterologous expression systems that explore the catalytic versatility of the Fe protein, either on its own or as a key component of nitrogenase, for nitrogenase-based biotechnological applications in the future. Moreover, the “clean” genetic background of the heterologous expression host allows for an unambiguous assessment of the effect of certain nif-encoded protein factors, such as AvNifM described in this work, in the maturation of AvNifH, highlighting the utility of this heterologous expression system in further advancing our understanding of the complex biosynthetic mechanism of nitrogenase.

59 BASIC BIOLOGICAL SCIENCES↗

Room Temperature to 150 °C Lithium Metal Batteries Enabled by a Rigid Molecular Ionic Composite Electrolyte

Molecular ionic composites (MICs), made from ionic liquids and a rigid-rod polymer poly(2,2'-disulfonyl-4,4'-benzidine terephthalamide) (PBDT), are a new type of rigid gel electrolyte that combine fast ion transport with high thermal stability and mechanical strength. In this work, a MIC electrolyte membrane is prepared that is composed of PBDT, lithium bis(trifluoromethylsulfonyl)imide (LiTFSI), and 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (Pyr 14 TFSI) in a mass ratio of 10:10:80. The ionic conductivity at 25 °C is 0.56 mS cm –1 with no added flammable/volatile components. Although the polymer content is only 10 wt%, this MIC membrane is rigid with a tensile modulus of 410 MPa at room temperature. The MIC membrane remains stable and rigid at 200 °C with the shear storage modulus (G') only slightly decreasing by 35%. Li/MIC/LiFePO 4 cells demonstrate stable cycling performance over a wide temperature range from 23 to 150 °C. The specific discharge capacity at 100 and 150 °C at 1 C rate exceeds 160 mAh g –1 . The discharge capacity retention is 99% after 50 cycles at 150 °C. Furthermore, this stable battery performance shows that this low polymer content MIC membrane qualifies for use as a solid electrolyte in lithium metal batteries operating over a wide temperature range.

25 ENERGY STORAGE↗